Message DT064 - object inactive

Hi,
I've verified that one of my infoobjects is inactive (0COORDER). While trying to activate it the following error occurred: Apparently table /BI0/KCOORDER has been modified. In detail, what i have is messagem DT064, that states that a fields of this table has been changed.
However, i've looked to all fields in the table and it doens't seem that the fields have been changed.
Anybody has an ideia of might be the problem?
Thanks and regards,
Joana

Hi Phil,
The system V IPC components are dynamically loaded on Solaris, so aren't in the system until you try and use them. Run a program that creates a message queue and ipcs will then report about the message queue facility.
Hope that helps.
Ralph
SUN DTS

Similar Messages

Problem with WCS, with an error message (Error: Object not found in device)

I have a problem with WCS, I can not open the window monitor / controllers with an error message (Error: Object not found in device) -> https: / / 10.19x.xxx.xx/webacs/switchDetailAction. do? ControllerID = 23735
by cons I can open the window configures / controllers -> https: / / 10.19x.xxx.xx/webacs/switchGeneralAction.do? command = detail & ControllerID = 23735
Is there a way to recreate the database or the object? thank you in advance

thank you for your help
Unfortunately, the command "refresh config from controller" does not solve the problem because we have a negative result
(in mode retain or in mode delete) with the following logs :
Log file wcs-0-0.log
10/19/10 12:07:16.333 ERROR[snmpmed] [23] Response VarBind missing for class InterfaceConfig attribute isInterfaceWired
Log file tomcat_localhost_access_log
10.197.xxx.xx - - [19/Oct/2010:12:07:16 +0000] "POST /webacs/switchListCommandAction.do HTTP/1.1" 200 47399
10.197.xxx.xx- - [19/Oct/2010:12:07:16 +0000] "GET /webacs/alarmSummaryAction.do?command=summary&dojo.preventCache=1287490037130 HTTP/1.1" 200 421

Type Messages and Objects turned from white to black in PDF

When I exported my Keynote presentation to a PDF the Type Messages and Objects turned from white to black. The display in ”Preview” is ok but in Acrobat PDF Viewer it looks black instead of white. Only happens on some slides. I could not find a reason why this happened. Seemed kind of random to me when it happened. But the error was reproducable unless I rebuild it with new silides.

Can you get the exact wording for that error? Is it can't mount iPod?
Also, make sure iTunes is up to date...
iTunes
Finally, make sure your iPod's battery is charged up.
btabz

Replace message payload object without remove queue table

hi,
i want to replace message payload object without remove queue table but i have got the "ORA-02303: cannot drop or replace a type with type or table dependents" error.
is there any way to replace message payload object without remove queue table?
Click to link below to find a demo which is explain the problem clearly
Replace message payload object without remove queue table
Regards.

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

Edit message payload object without remove queue table

Hi, need ur help again,
Known that if we want to modify a message payload attribute (add,edit or delete), we will fail to do so if the message payload is used by existing AQ's queue table.
How to change the message payload object without remove the queue table?
Thanks!

Hi
I answered this in Re: Replace message payload object without remove queue table forum.
Cheers, APC

"Message Queue facility inactive"?

Hi all,
When I run ipcs command, I got:
$ ipcs
IPC status from <running system> as of Wed Mar 28 15:06:55 PST 2001
Message Queue facility inactive.
T ID KEY MODE OWNER GROUP
Shared Memory:
m 0 0x50000e9b rw-rr-- root root
Semaphores:
$
Does this mean the Message/Shared Mem/Semaphore is not active? How do I make them active? Thanks in advance for your help!
Phi;

Hi Phil,
The system V IPC components are dynamically loaded on Solaris, so aren't in the system until you try and use them. Run a program that creates a message queue and ipcs will then report about the message queue facility.
Hope that helps.
Ralph
SUN DTS

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

Keep getting this: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"}

My daughter is the first time user of Thimble. She is using your amazing tools to create a webpage but she can't save her work at all. Everytime she press SAVE, a message: Sorry, an error occurred while trying to publish. {"status":500,"message":"Error: [object Object]"} . Any suggestion to solving this problem will be greatly appreciated

Reload the webpage while bypassing the cache
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Clear the cache and the cookies from sites that cause problems.
'''Clear the Cache''': Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
'''Remove Cookies''' from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Blazeds messaging services object cast

hi everyone i am new to flex and blazeds i am using messaging services for my app and sending objects through messages.
message.body = new object1()
message.body.object = someobject;
myproducer.send(message);
on recieving hand
i can reach message.body.object.name but when i assign this object to some object like
var newobject:type1 = message.body.object as type1;
and try to get name from newobject.name i got empty object error error type 1009
is there anybody help or any clue
thank you.

Ok, so well no one responded...In case anyone in the future
stumbles into this problem, I think I've found out the problem.
Since I was deleting this info, I was sending the delete
request to my java code (which read the array of ChartObjects and
deleted each one using the name of the chart to delete it from the
database) and then immediately afterwards, I was deleting the same
data structures in my flex code.
Apparently Flex doesn't copy the data and send it, but sends
the actual data or a reference to it. So even though my lines to
remove the data were after the database delete request, by the time
the database deletion got executed in the system, the data had been
erased by flex. It seems like Flex does not handle events in
sequential order as it is written in the code. I've run into this
in other places with messaging and flex. So I'll just have to
rewrite the logic to take into account this behavior.

WDA - Interface object inactive

I have a very simple PDF, with three fields from a structure dragged-n-dropped in. All three fields are bound to the main structure I think OK. When I do a Check, everything is fine.
The problem is that the form status is Inactive, as shown at the top of the screen. When I activate it, it looks like it will activate. It goes through a process of about 1 minute. When the hour-glass wait icon disappears, the form status is still inactive...???? I tried activating the entire WDA from the top- the form remains inactive. Same results are given in either edit or display mode. I don't get it.
Thank You......
Just to clarify:
The View that the PDF element is in is Active.
The PDF Form element, TemplateSource interface shows to be Inactive when the right drop-down icon is clicked in the TemplateSource line.

Hi
Mapping Objects: Message Mapping,Interface Mapping,Imported Archive
Message Mapping : Transformation from one msg structure to another and here the transformation rules are defined by the mapping program.
Interface Mapping : When different interafaces are used in an Integration Scenario, we need to transform the structures of these interfaces.
Imported Archive : For importing externally defined programs in the Integration Repository like java mappings or xslt stylesheets.
Thanks

Existing Info object inactive after BC from different version

Hi,
This is very bad! The system I am working on was upgraded from 3.5 to 7.0. I activated business content for SRM info providers. I managed to load master data, create info providers, etc, etc. When it came time to transport I was having problems all kinds of problems - the objects in QA became inactive also. So I re-activated all those objects in Dev and tried to transport again, it didn't give me an error but it still did not activate in QA - in the transport, I found the following messages. My transport was only the object and the attributes - no rules.
Transfer structure 0SBOGL_ACCOUNT_ATTR_AC could not be deactivated
Transfer structure 0SBOGL_ACCOUNT_ATTR_AE could not be deactivated
Transfer structure 0SBOGL_ACCOUNT_ATTR_AF could not be deactivated
Transfer structure 0SBO_ALTACT_ATTR_AF could not be deactivated
Can someone help me Please!!!!
Thanks
Suzanne

Objects were inactive - activated and now it's ok

S_Tcode authorisation object Inactive

After adding T-code in the role in Development,generated the profile and transported it to Regression system but when it was transported to Production , the S_TCODE became inactive and the transaction related to the particular role were not accessible.
Do anybody suggest me ,why this was happened.
Is it happened due to transporting the changes in production during working hours or reason is some technical.............
Thanks
Manoj

Hi Manoj,
Check if the associated profile has this object in it. (S_TCODE) for that tcode.
Even if someone has changed the role in QAS, and assuming the same transport request has been imported in production after i dont know what QA( if S_TCODE is inactive , how did it pass QA?, how did the tester execute the tcode?) , the role will have this object in production, unless changed and generated here too!
Do let us know how the profile looks like with the time stamps
Thank you
Abhishek

Error message "multiple objects found"

Hi,
I run into a new issue and durig role creation of design-time-roles. I get since a few days the message
"test:testrole.hdbrole": multiple objects found
my simplified role: (worked out before hundred times)
test::test
extends role test::testrole
The role exists as design-time-object (one entry in "_SYS_REPO"."ACTIVE_OBJECT" and also only one entry in "SYS"."ROLES")
Other roles can be granted as as usual - just a bunch of them make trouble.
I dropped the roles (afterwards 0 entries in the mentioned tables) ... when activating testrole.hdbrole it says no object found - as expected. created the role again and the message appears again. Pretty weird.
Did one of you had the same issue and solved it?
Thanks for your answers in advance!
Regards,
Marcus
P.S: Running HANA SP7 Rev 72 (DB+Studio+Client)

Hi Mika
Can you check your : HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path
For each key under HKLM\SOFTWARE\Microsoft\Office, apparently HKLM\SOFTWARE\Microsoft\Office\xxxx\Outlook\InstallRoot\Path has a "Outlook.exe" file at the location.
If more than 1 file paths are found, then it appears that multiple versions of the outlook are installed.
You might want to re install office if more thaqn one appears

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

Message DT064 - object inactive

Similar Messages

Maybe you are looking for