Message getting cut off when using carkit

While using my 5800 and OVI Maps with my Nokia CK-100 carkit nagigation messages get cut of at the start (vey annoying).
"In the next roundabout..." becomes "e next roundabout".
"After 200 meters..." becomes "r 200 meters".
And so on...
Seems likie the phone starts sending the audio before the carkit has switched on the audio (there is a relay saying "click" :-)
Is there anything that can be done about this?
Like a small pause before the voice message is played (1/2 second silence at the start of the message)?
Also when the message is done playing the radio mute is on for a LONG while before radio switches back on. Why?
Lars-Erik Østerud - http://www.osterud.name/nokia.html

Upgraded from 4.300 to 4.401
(download on my laptop and carried that down to my car, must have looked like a very high-tech car-thief sitting there with a laptop and a USB cabled plugged into something under the dashboard :-)
Haven't tried driving yet (only tested that te CK-100 still worked :-)
Lars-Erik Østerud - http://www.osterud.name/nokia.html

Similar Messages

CS5 Text still gets cut off when using filters

In Flash CS4, I encountered a strange bug where text would get cut off if there were any filters applied to the text box. I was so excited for CS5, because I had heard that bug was fixed. Now I see that it is not.
I'm using Classic Text in an Actionscript 2.0 file. Here's a screenshot to demonstrate what I mean. The top line is text with no filters applied. The middle line is text inside a movie clip, with filters applied to the movie clip. The bottom line is text with a drop shadow filter applied directly to the text box. Why does it cut off the end of the text???
Has anyone else experienced this?

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

Titles get cut off when playing after the burn

The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
Any help is appreciated.

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

Bottom margin gets cut off when I try to print

bottom margin gets cut off when I try to print

Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
Also go to HP and check if there is a newer printer driver if yours has some years on it.
I hope this will help you

Why iphone centre in malaysia always get cut off when i call.

i always get cut off when i call iphone centre on malaysia,
need explaination from centre.

so why are you asking us users? That makes absolutely no sense at all.

Device gets turned off when using data on mobile

device gets turned off when using data on mobile... and not responding,i.e., if we hold the power button also there was no response,not getting on... when I connect it to charger,after 10min it gets automatically turning on.otherwise no chance to use the device..sometimes it gets off at 25%, sometimes at even 72% battery...seems it might be a severe problem..please suggest a solution..

This might help:
http://helpblog.blackberry.com/2013/02/restart-blackberry-z10/

Why do my margins get cut off when I right click print, but not when I open my document and print?

When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine. This only happens when the document has print that is close to the edge.
I am using Adobe 10.1.2 with Windows 7.
Thank you in advance for your thoughts and help

As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

How do I get my watermark not to get cut off when printing from aperture?

When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

Aperture should scale watermarks down to fit the exported image. Perhaps it is scaling to one dimension and not both?
Have you tried resizing your watermark? I suggest creating a watermark for each commonly used export size. I use a wide and not tall watermark, in these widths (in pixels):
- 320
- 640
- 1024

Beginning of audio cut off when using digital optical out

Hi all,
This is my first post here since switching to Mac earlier this year.
I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out. This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like). I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906). Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
The problem does NOT happen when using the built-in speakers. I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing. If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped. I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something). I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it. It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead). However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago. It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support. So here I am!
Does anyone else have this problem with optical out, and how can I resolve this? Any help would be gratefully appreciated.
Thank you.

Hello kcore66,
Would it be possible for you to upload one of the files in
question so that I can take a look. In Captivate 1.01 there is an
intermittent problem where sometimes the audio is either cut off or
just doesn't play when you publish / preview. To get around this
simply moving the audio object back and forth along the timeline
and then positioning it back in it's original position works 9
times out of 10.
HTH
Regards,
Mark

IM names cut off when using larger font

I switched my IM windows to use a 12pt font instead of the default 10pt font. Now it cuts off the bottom half of all that names. But hey, at least I'm still wasting 50% of my screen real estate on whitespace and bubbles!

read about it here
Characters become cut off when font size is set larger than 8 on the BlackBerry 10 smartphone
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Text gets cut off when exported to PDF

When I export my report to PDF some of my text gets cut off where it would meet the right edge of the text box by 1 or 2 letters.
This only happens when I export to PDF through my web application or when I export it throught the Report Manager URL
If I export it on my local copy of SSRS then it shows up fine without the text getting cut off

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

Brochure template right-side edge gets cut off when printed

its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
comments are hidden (that helped a little)

With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
MacBook Pro Mac OS X (10.4.9)

Strokes on appearance is getting cut off when exporting for web & Devices

I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
Is there any setting either in illustrator or windows that may be causing this anomaly?

Try adding:
Effect >> Path >> Outline Object
So your type will still be editable
If that does not work you may want to:
Type: Create Outline
I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Do the edges of a video get cut-off when added to an iMovie project?

When I view a video clip from the events library it fits in the viewer screen perfectly, i.e., the entire image appears on the screen. After adding the video clip to my project, when I play the video from the project, the edges appear to have been cut-off, i.e., my giraffe has no head. Do I need to resize the original video file? How?

Thanks for the idea. I found a solution to my problem in another discussion between KimsAZmac and AppleMan1958. If you use stabilization the image is made larger so it doesn't fit in the viewer. The solution is to turn off stabilization or use the slider on clip adjustments so the image fits the screen.
Problem solved.

Message getting cut off when using carkit

Similar Messages

Maybe you are looking for