Message Got Stuck in Adapter Engine

Hi All,
Currently i am facing one problem with Adapter engine. The issue is we have one FILE to RFC to FILE scenario. Source file got picked at 7:15 AM in the morning. But XI placed the target file at 8:05AM. so XI it took 50 mintues to process the file. But in SXBM_MONI the time difference between request and response messsages in 6 seconds.
Where as as per the logs in RWB, Adapter engine too 50 minutes to process a single fine.
Here my question is waht could be the reason for this delay in processing and waht should i do to avoid such delays in real time.
Please help me out in this. Thanks in adavance.
Regards,
Manjula P.

Hi,
The link for message diaplay tool
http://server url:Port/MessagingSystem/monitor/monitor.jsp
Click on Sent messages=>Synchronous. Give the proper time when error was occured. The second column is audit log and send the details to us thru the same thread.
and
Click on recevied messages=>ASynchronous. Give the proper time when error was occured. The second column is audit log and send the details to us thru the same thread.
Thanks,
Ramesh

Similar Messages

Messages got stuck in Adapter engine

We are doing http to RFC sysnchronous scenario
Message got stuck in adapter engine.so we are getting 500 HTTP timeout error in Http client.
Please help us to find why messages got stuck in Adapter engine.
Below Adapter engine audit log message is pasted for your reference.
Audit Log message:
Time Stamp Status Description
26.09.2008 06:33:54 Success Message successfully received by messaging system. Profile: XI URL: http://devsap01:51000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
26.09.2008 06:33:54 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
26.09.2008 06:33:54 Success Message successfully put into the queue.
26.09.2008 06:33:54 Success The message was successfully retrieved from the request queue.
26.09.2008 06:33:54 Success The message status set to DLNG.
26.09.2008 06:33:54 Success Delivering to channel: RFC_out_Test
26.09.2008 06:33:54 Success MP: entering
26.09.2008 06:33:54 Success MP: processing local module localejbs/RfcAFBean
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for ZFTestRFC
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for J2EE_GUEST
ime Stamp Status Description
26.09.2008 06:56:15 Success MP: leaving
26.09.2008 06:56:15 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Setting message to status failed.
26.09.2008 06:56:15 Error The message status set to FAIL.
26.09.2008 06:56:15 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired..
Kindly advise us on this issue.

Hi krish,
when i send a http request it got stuck in adapter engine with status "delivering" for some time....
We found that RFC got successfully executed in R/3 system but the synchronous message is not delivered to PI.since adapter engine message is having status "delivering"
after some time we got adapter engine message status as "cancelled with error"
Error is Message expired exception which you can see audit log message I have pasted in my previous post.
Meanwhile we also got HTTP timeout error in Http client.
Could you please tell me why it got stuck in Adapter engine with status "delivering" since RFC is executed successfully.
Why we are not getting synchronous message reply back to PI?

Messages got stuck in inbound adapter engine queue

Hi Experts,
My senario is File - XI -SAOP reciever and we have 8 usecases of same type. For 7 usecase, we dont have any problem. But for only one use case we have having heavy delay in processing messages.
All my messages got stuck in inbound queue of Adapter engine in to be delivered state, wait state, delivering state.
Please see the below logs and suggest some solution.
To be delivered Message log :
Time Stamp Status Description
2008-06-30 06:54:20 Success Processing child message of multi-message with message ID 8c597510-466f-11dd-92f9-000f203c93e0
2008-06-30 06:54:20 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:54:20 Success Message successfully put into the queue.
Waiting Message log :
Audit Log for Message: 4864ad2b-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message I
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:16 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:16 Success The message status set to DLNG.
2008-06-30 07:46:16 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:16 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Delivering Message log :
Audit Log for Message: 4864ad2d-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message ID 7481f110-466f-11dd-b8ce-000f203c93e0
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:24 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:24 Success The message status set to DLNG.
2008-06-30 07:46:24 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:24 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Thank you
Subbu

Dear Subramanyam,
Some message might be struck in the queue. Because of this reason furthur processing is not performed on time.
Please try to do like this:
Go to SXMB_MONI, or SXi_monitor, select QueueID in the row, which is showing green flag. In the next window belongs to queue select the queue and press unlock button on the panel.
This could possibly release the queue which is struck.
Best Regards
Praveen

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Getting synchron message data from advanced adapter engine

Hi,
we have to get all synchron messages from the advanced adapter engine. Normally all messages with errors must be persisted on data-base. How this will be done? We try to with
/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence).
But this don´t work :-(.
What´s about correct messages? How this can be persisted?
Is there a API or we must implement a Adapter Module?
Thanks in advance,
Frank

Hi,
if you just want to see the msg and not its audit log, then in PI by transaction SXMB_ADM - integration engine configurtion - configuration data, add a entry for RUNTIME category LOGGING_SYNC parameter and set it to 1...........then you can see your synch msgs in SXMB_MONI transaction in your PI system.
Regards,
Rajeev Gupta

Messages stuck at Adapter engine

Hi everyone,
My messages are getting stuck at the Adapter engine level and shows the status as "Holding". But the step at Integration engine seems to work fine.
How could i get rid of these messages, before I run another couple of messages.
Also what could be the reason for the error.
Thanks,
Vinotha M
Edited by: Vinotha M on Feb 23, 2009 5:59 PM

Hi Vinotha,
Apart from the blogs mentioned above dont forget to go through
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
This would give you a greater insight into your the cause and analysis of your problem.
Apart from the above link to avoid further cropping of the same problem you can " Start Prioritizing the Processing of Messages" http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6ffe8effc20eede10000000a155369/content.htm
Rgds
joel
Edited by: joel trinidade on Feb 24, 2009 9:55 AM

Messages Stuck in adapter engine but passing through Integration engine

Hi All,
SOAPFault Error. Error Code/Category: XI Protocol/ Wrong Value...Received HTTP Response Code 500: Error during Parsing of SOAP Header
Above error as system error appears in adapter engine when messages are coming into SAP PI. At sender, we are having sender mail adapter.
Adapter Modules are also configured in mail adapter.What could be the possible reason.
Please suggest
Regards,
Kanisha

Below is the error log. As per scenario, Mail To File.
Please Suggest
Regards,
Kanisha

Message stuck in Adapter Engine queue with status "Delivering"

Hi All,
I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
Restart of server is not an option here. Is there are place I can delete the message from AE queue?
Thanks
Jaishankar

You can see the queues status (and number of stuck entries etc) through the link:
http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
There, you can maintain the queues.
There is also a link for the EOIO Sequence Monitor:
http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
There you can see the stuck messages and maintain these.
Make sure to handle the proper message IDs.
All of these are acessible through the Messaging System main page:
http://<host>:<port>/MessagingSystem/
Regards,
Henrique.

Message stuck in adapter engine with status Hold, how to delete those

Hi,
In Dev system around 6 lac messages are stuck in ;holding' state. How can I delete them. Is there is any standard proge which can delete all these messages.
Can I delete messages of IE with status 'recorded'?
Regards,
Krishna

Hi,
see this wiki
RSXMB_ARCHIVE_MESSAGES Archive XML Messages
RSXMB_CANCEL_NOT_REST_MESSAGES Cancel XI Messages With Errors That Cannot Be Restarted
RSXMB_DELETE_ARCHIVED_MESSAGES Delete Archived XML Messages
RSXMB_DELETE_MESSAGES Delete XML Messages from the Persistency Layer marked for DEL
RSXMB_CANCEL_MESSAGES Mass cancellation of error messages - XI
RSXMB_SHOW_REORG_STATUS & RSXMB_SHOW_STATUS provide an overview for all XML messages in XI persistency layer.
RSXMB_MESSAGE_STATISTICS2 which provides the processing statistics. This report basically analyzed the history table.
RXWF_XI_UNSED_MSGS report helps in converting messages states other than 003 to final state i.e. 003.
SXMS_REFRESH_ADAPTER_STATUS report helps in converting message sates like 001/008 into final state.
http://wiki.sdn.sap.com/wiki/display/XI/PIArchivingConceptual+Overview

File to File ------ Message getting stuck in Integration Engine

Hi All,
I have a small issue in file to file scenario .
Once I send the file .Its getting picked up from the source directory but its not getting delivered to the destination directory.
When I check in SXMB_MONI ,message is successfully processed.
Now when I check in RWB. In Message monitring, In adapter engine its showing successful.
but for Integration engine its showing "To be delivered".
I am not able to understand the reason for this. Whether the issue is with configuration of the scenario or some other issues.
So please help me out......
Thanks,
Rohit

Hi,
Make sure you have set the MaxThreadCount parameter to 350 or higher depending of the case and of the resources available.
To increase the parameter, please follow the instructions below:
1. In the left frame choose Server -> Kernel -> ApplicationThreadManager
2. In the tab Display Configuration (right frame) choose Switch between view and edit mode to activate the edit mode.
3. The parameter MaxThreadCount must be set to 350.
4. You will then need to restart the J2ee
For reference see note #937159 - XI Adapter Engine is stuck
For specific setting to an adapter can be done by going to the Visual Administrator -> Services -> SAP XI AF Messaging
Look at the property 'Messaging connections' here you will see the following queues:
Send.maxConsumers (asynchronous sending - outbound)
Recv.maxConsumers (asynchronous receipt - inbound)
Call.maxConsumers (synchronous sending - outbound)
Rqst.maxConsumers (synchronous receipt - inbound)
Depending on where the bottleneck is occurring (i.e. too many entries in the Send.maxConsumers) you can increase these parameters.
Example of parameter value syntax (sample for FILE adapter):
(name=FILE_http://sap.com/xi/XI/System, Send.maxConsumers=10, Recv.maxConsumers=10, Call.maxConsumers=10, Rqst.maxConsumers=10)
For reference see note:
#791655 - Documentation of the XI Messaging System Service Properties
And see the link:
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Regards,
Caio Cagnani

Messages are failed in Adapter Engine

Hi Experts,
give me solution as early as possible pls
There is a problem with production system in XI.
I am getting the error in Adapter Engine level in Runtime workbench.
"Attempt to process file failed with
com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution:
com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload:Fatal Error:com.sap.engine.lib.xml.parser.parserException: XMLparser: No data allowed here(:main:,row:,col:75)"
The scenario is IDOC to JMS & File.
There are 2 conditions
if the data is coming from ECC is valid then Msg will go to the JMS
other wise it will be dropped into File System.There is no problem with valid data.
when ever invalid data will come 70% Messages are processed succefully and few Messages not processed.
if i resend this error message 2 or 3 times it is processed succefully, iam getting huge number of messages like this,
it is difficult to resend because if i select all Msg's it is not processed only one Msg will be processing when iam trying to re-send
please can any body give me the permanent solution for it.
Thanks & Regards
Sankar

Well,
Take account the following considerations.
1. Check your source code for the variable substitution(Maybe you can show us).
2. check in the tab "Advanced" on you file adapter configuration, there are many checkBox, for example is you are replcainf the file name in you mapping The "File Name" check(in Adapter specific attributes) has to be checked, and if you are using other variables you need to do the same.
I hope It helps you.
Ivan

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Resend Message that fails in adapter engine but shows success in sxmb_moni

Hello SDN!!
We are testing sending soap requests out via SSL. We are using a BEA as a pass through server for SSL encryption only.
The scenerio is to send a message from SAP to PI 7.1 to BEA (SSL enc) to Receiving System. We successfully connect to BEA (only used as a pass-through) but the connection to Receiving System does not work. This returns an error to our adapter engine.
My question is this, Since SXMB_MONI shows the message as successful, but the adapter engine is showing an error. What is the best way for
1. Monitor the errors, (I only see where you can monitor the type of adapter only)
2. Resend the message, since it shows valid in SXMB_MONI, it won't let me resend.
Any help will be greatly appreciated and awarded
Cheers
Devlin

1. Once the message is in successful status in moni, the best way to monitor becomes RWB -> Message Monitoring.
2. For adapter engine related errors, you may resend the data manually using the resend option in the Message Monitoring. Otherwise, for automatic retry of messages, you may change the default settings.
Regards,
Prateek

Problem with a SMS-signature, or a message got stuck

Have an iPhone 4s running iOS 6.0.1
It seems like a textmessage got stuck like an signature in the message program. Every time i open up a new message an old, previous message shows already prewritten i the text-field. It also appear when I try to forward a message. Together with the text I am trying to forward the "signature-text" appears. And I don't know how to get rid of it.
I know that this is not supposed to happend and you can only do this in e-mail. But it has happend and I need som assistance to how to get rid of the text.
And no, the phone has no Jailbreak, no third party app doing this and the serviceprovider has no such funktion.
So please help me.
Eric

Hi Erik,
I seem to have developed the same problem. A previously typed message always appears when i try to type a new message. Have you been able to solve your problem? Please help..
Thanks,
Vish

Message Got Stuck in Adapter Engine

Similar Messages

Maybe you are looking for