Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below  i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

Similar Messages

  • BPM Error: Message has error status on outbd. side

    Hi,
    BPM overview:
    Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
    Error Message in SXMB_MONI: Message has error status on outbd. side
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
    <Trace level="1" type="T">--start sender interface action determination</Trace>
    <Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
    <Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
    <Trace level="1" type="T">no interface found</Trace>
    <Trace level="1" type="T">--start receiver interface action determination</Trace>
    <Trace level="1" type="T">Loop 0000000001</Trace>
    <Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
    <Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
    <Trace level="1" type="T">no interface found</Trace>
    <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
    <Trace level="1" type="T">Hence set action to DEL</Trace>
    </Trace>
    I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
    In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
    Any help would be greatly appreciated as I ran out ideas to fix this issue.
    Thanks in advance.
    Sarvesh

    The issue was with the step "Transformation Step (2)" and I fixed it in the mapping. 
    When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)".  The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step. 
    If I insert a "Wait step" between the 2 send steps it working.  Can anyone explain how the send step in BPM works. 
    I did post the same question in "Exchange" forum also so that it can be view by more people.
    Thanks,
    Sarvesh

  • Message has error status on outbd side

    Hi,
    I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
    Any clues!!!!!!!!!!
    Regards
    Swatantra

    Hi Vijay,
    Cross check whether you have done these:-
    SLD-
    1) Create a Product/Software Component
    2) Technical System pointing to R/3 system
    3) Business System for the above technical system
    In the Repository
    1) Import the Software component created in the sld
    2) Create a namespace,
    3) import the idoc and then create sender data type/message type etc and mapping
    4) Mapping Rules is depends on the requirement
    In the Directory
    1) Create a Scenario /import the business system
    2) Create Receiver/Interface determination
    3) Create communication channels for sender and receiver
    4) Sender Agreeement and Receiver Agreement.
    Then the file adapter configuration is depend on the input file format.
    Also you need to have Logical destionation created in the XI , and the IDX1 entry
    In R/3 Port, Partner profiles etc should be created
    Have a look into this document~
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    While doing an File -> XI -> IDoc scenario, The Points to noted are:
    1. You don’t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
    2. You import the IDOC and use the same in your mapping.
    3. In this configuration note that you will need a sender agreement for the file.
    4. In this configuration note that you will also need a receiver agreement for the IDOC.
    For any File -> XI -> IDoc scenario ref:
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    Hope this helps.
    Regards.
    Praveen

  • Message has a error status on outbound side

    hi all
    when iam doing bpm alert , in sxmb_moni iam getting the message
    "message has a error status on outbound side" error flag is coming.
    Regards
    Raju

    HI,
    Check receiver agreement and reciever determination.
    Regards,
    AKshay.

  • Message has error status at outbound side File To Idoc Scenario

    hi ,
    In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
    When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
    Please suggest what may be the problem ?
    Regards,
    Rohit

    1. First check the RFC destination name used in receiver Idoc adapter communication channel.
    2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
    3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
    4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
    Regards,
    Prateek

  • BPM Scenario: Message has error status on outbound side

    Hi All,
            I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
            If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
               Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
    Thanks & Regards,
    Purushotham

    Hi Nutan,
            I hv configured my scenario as follows
    1. Start
    2. Block ( Deadline and Control step for cancell the process)
       3. Fork(Necessary branches 12)
          4. Loop(12 loops)
              Under loop
              a. Receive Step
              b. Container Operation( For count)
              c. Container Operation(For append)
    5. Fork( Necessary branches 12)
        6. Transformation
        7. Send
    8 Stop
    This is my scenario. In the first Fork step i am checking end condition as total  number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
            Now can you please tell me what is the problem.
    Thanks & Regards,
    Purushotham

  • Message has Error status on outbound side - in ABAP inbound proxy !!

    Hi All,
    One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
    Regards
    San

    Hi ,
    Please check whether the  correct data  is coming from sender side .  and check the j2ee engine runtime parameters.
    Cheers,
    Meera
    Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

  • ** BPM Error - Msg has error status on oubound side

    Hi Friends,
    I am doing BPM scenario. (Receive Step --> Transformation Step --> In Block (For each) Synchronous Send Step ). That's all BPM design.
    We have created Server prox (inbound Proxy) in ABAP, it receives PO details and return Sales order no. Coding has been written inside Proxy. If we test Proxy in ABAP, it is working fine.
    The required PO data we pass from JDBC. Receive step receives the whole message (It may contain 1 or more PO). In Transformation step, we split message using multiline checkbox( One message per 1 PO).
    Message is processed successfully upto this step. In the Synchronous send step, it throws an error.
    In SXMB_MONI, 3 messages are generated. In the first message itself, in the outbound status column 'Red Flag' is coming, (but processed successfully).  The error is 'Message has error Status on outbound side'. Inside the message 'PE'  adapter is in grey color.
    So, what could be the problem ..?
    Kindly reply, friends.
    Kind Regards,
    Jegatheeswaran P.

    Hi Jegatheeswaran,
    Take the Message after transformation and try to test your synchronous service with this message,
    if u r using any web service you can use Altova (XML SPY) to test your service with the data after
    transformation.
    If it does not show any problem then try to see you have build your BPM Properly (Press F7 to test For any syntactical error).
    You can also go to SXI_CACHE to see if your Workflow does have status 0 .
    To get Exact error Message . Click on PE ->goto->ThechnicalSetting->select synchronous call->click on content tab->and go on navigating you will find detailed exception.
    Reward Points IF Helpful
    Thanks
    Sunil Singh

  • Error status on outbound side

    Hi experts,
    I am in JDBC to IDOC scenario and right now i face following error in SXI_MONITOR (black and white flag in status field BUT Red flag in outbound status):
    "Message has error status on outbound side"
    This is a heavy interface (up to 8MB) but, in the past, we did not receive this error. I saw that there is an entry in SM58 from the PIAFUSER that says "Lock table overflow"
    Thus, I set the parameter enque/tablesize up to 8192 MB but after restarting the system it did not work either, a new entry in SM58 is shown.
    If i analyse the runtime tab of the response of the message i can see
    <SAP:AdapterStatus>007</SAP:AdapterStatus> --> for an erroneous interface execution (payload=7,2MB)
    <SAP:AdapterStatus>006</SAP:AdapterStatus>  --> for a successful execution (payload 6.5 MB)
    Can anyone plz, help me on this?
    I cannot explain why we did not face this in the past.
    Can you please explain how the lock table works? and what does the overflow means?
    Thanks a lot in advance and best regards,
    David

    Hi Sai,
    Ive checked what you mentioned but cannot see the point there. Maybe you can help me:
    Enqueue Operations     847
    rejected     17
    Error occured     0
    Dequeue Operations     604
    Error occured     0
    Dequeue All Operations     661
    Cleanup Operations     0
    Backup Operations     1
    Read Operations     21
    Compress Operations     0
    Verify Operations     0
    Records written     58408
    to the backup file     2
    Maximum Number of Lock Owners     58406
    Maximum Fill level     4
    Current Fill Level     0
    Maximum Number of Lock Arguments     58406
    Maximum Fill level     14
    Current Fill Level     0
    Maximum Number of Lock Entries     58406
    Maximum Fill level     14
    Current Fill Level     0
    Update; Fill Level at Maximum     1
    Current Fill Level     0
    Time in Lock Table /Seconds     0.073970s
    Wait for Lock Table /Seconds     1.691441s
    Time in Lock Server /Seconds     0.000000s
    Besides, i dont think it is gonna be a matter of disk spaces as all of them have, at least, 3.0 Gb of free space.
    Any other clue? I increased the enque/table_size up to 65 MB and the lock table overflow in SM58 still remains!!!
    Thanks a lot and best regards,
    David

  • SOAP Invoke error: Status (500): Internal Server Error

    I have a BLS with a WebService action.  I am testing the WebService call with each operation within the wsdl address.  I used the wsdl address to make the call.  I selected the only port available.  There are several operations available.  This WebService call is successful for all operations except for one.  The operation that fails, I get the following errors in the "ServletExec.log" for this one operation.  Can you tell me where the issue may be?
    "SOAP Invoke error: Status (500): Internal Server Error"
    "java.lang.Exception: Status (500): Internal Server Error"
    "at com.lighthammer.webservice.SoapClient.invoke(Unknown Source)"
    "at com.lighthammer.xacute.actions.webservice.WebServiceAction.RawInvoke(Unknown Source)"
    "at com.lighthammer.xacute.actions.webservice.WebServiceAction.Invoke(Unknown Source)"
    Thanks,
    Chris

    The Web Service had been "Reversed Engineered".  In doing this, the parameters had been changed in the Web Service.  This created a "break" on MII's side (i.e. MII was still trying to pass the authentication token to the parameter named "authenticationToken", instead of passing it to the parameter named "paramString1".).
    Thanks,
    Chris

  • Message has error status on outbound side

    Hi All.
    I'm doing file to file scenario.configured everything, showing success message in SXMB_MONI but with error flag at <b>outbound status</b>
    My R/3 system is :  SAP ERP Central Component 5.0
    But I'm unable to find the related product for this system from the following systems
    SAP R/3 4.5, 4.6 and 4.7version
    I have selected :  SAP R/3 ENTERPRISE, 47X110 IDS on idesecc
    my question is whether i created technical system wrong or any other mistake i have done for this problem?
    pls suggest a suitable solution for my problem.
    thanks,
    Manoj

    Hi,
    My message contains following information.
    - <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>100</SAP:MANDT>
      <SAP:DOCREL>640</SAP:DOCREL>
      <SAP:DOCNUM>0000000000036231</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>CREMAS</SAP:MESTYP>
      <SAP:MESCOD />
      <SAP:MESFCT />
      <b><SAP:SNDPOR>SAPTX1</SAP:SNDPOR>
      <SAP:SNDPRN>LS_SAP</SAP:SNDPRN>
      <SAP:SNDPRT>LS</SAP:SNDPRT></b>
      <SAP:SNDPFC />
      <b><SAP:RCVPOR>SAPRD1</SAP:RCVPOR>
      <SAP:RCVPRN>LS_SAP800</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT></b>
      <SAP:RCVPFC />
      <SAP:TEST />
      <SAP:SERIAL />
      <SAP:EXPRSS />
      <SAP:STD />
      <SAP:STDVRS />
      <SAP:STATUS />
      <SAP:OUTMOD />
      <SAP:SNDSAD />
      <SAP:SNDLAD />
      <SAP:RCVSAD />
      <SAP:RCVLAD />
      <SAP:STDMES />
      <SAP:REFINT />
      <SAP:REFGRP />
      <SAP:REFMES />
      <SAP:CREDAT>0000-00-00</SAP:CREDAT>
      <SAP:CRETIM>00:00:00</SAP:CRETIM>
      <SAP:ARCKEY>B07DF8A0A03811DBADD00003BAF07785</SAP:ARCKEY>
      </SAP:IDocOutbound>
    I'm unable to find where is this SAPTX1 .
    Actually i created SAPRD1 port in XI pointing  to R/3 and SAPXD1 port in SAP pointing to XI
    SAP logical system as LS_SAP800 but idon't from where LS_SAP is coming
    Thanks
    manoj.

  • "waiting" and "system error" status cannot be resent in rwb?

    Hi,gurus:
    In RWB->MESSAGE MONITORING,I can't resend or cancel the messages with the status " waiting" and "system error".
    when I clicked "resend" button,it asked for user and password.After I was authentificated,the system didn't resend a message. Have you ever met this issue?
    By the way,I could resend the error messages before.
    Thanks in advance.

    Hi,
    I checked the note 1233918,and it talked about the same issue.
    But the solution is as follows,which I don't know what to do.(Our PI version is PI7.0 SR3 SP14)
    Symptom
    When the first message for a managed system is cancelled or resent, after pressing ok in the logon pop-up nothing happens - message is not resent or cancelled. The logon data is correct, since subsequent resend/ cancel works without further logon request. Another symptom is cancelling or resending a wrong message, when using the filter mechanism in the table. E.g. the table displays messages A, B, C, D. If message C is selected and after that the filter is set so that message C is hidden from the filter selection, when selecting message D and trying to resend/cancel it, message C is cancelled/resent (the hidden one, previously selected) and nothing is happening with message D.
    Other terms
    NWA, PI, Message monitoring, resend, cancel
    Reason and Prerequisites
    The UI Proxy connection was not obtained properly. Another reason - TableAccessories was not invalidating the nodes properly. Also after filtering the result list, resend/cancel was taking wrong message Ids.
    Solution
    For SP5 install LMNWABASICCOMP05P_1.SCA or higher patch level.
    For SP6 install LMNWABASICCOMP06P_1.SCA or higher patch level.

  • Offline Backup got error Status Finished with error

    Dear all ,
    OS AIX , DB Oracle , SAP ECC6.0 , Tivoli Storage Manager
    Offline Backup got error Status shows Finished with Error   (Backups are fired through DB13)
    Retune Code :0005 Error during processing
    Detail Logs:
    BKI0027I: Time: 12/10/09 05:19:06 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
    BKI5005E: Tivoli Storage Manager Error:
    ANS1312E (RC12)   Server media mount not possible
    BKI1208W: The object '/oracle/IRP/origlogA/cntrl/cntlrIRP.dbf' will be retried [4].
    BKI0027I: Time: 12/10/09 05:19:38 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
    BKI5005E: Tivoli Storage Manager Error:
    ANS1312E (RC12)   Server media mount not possible
    BKI1231E: Maximum number of retries for file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf exceeded.
    BR0233E Backup utility has reported an error while saving file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
    BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
    #END /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
    BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
    BR0304I Starting and opening database instance IRP ...
    BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
    BR0305I Start and open of database instance IRP successful
    BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
    BKI1215I: Average transmission rate was 237.735 GB/h (67.622 MB/sec).
    BKI1227I: Average compression factor was 1.000.
    BKI0405I: TDP waited 497 sec. for BRBACKUP in util_file_online communication.
    BKI0020I: End of program at: Thu Dec 10 05:20:33 IST 2009 .
    BKI0021I: Elapsed time: 02 h 20 min 31 sec .
    BKI0024I: Return code is: 2.
    BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
    BR0279E Return code from '/usr/sap/IRP/SYS/exe/run/backint -u IRP -f backup -i /oracle/IRP/sapbackup/.beccdcmb.lst -t file_online -p /oracle/I
    BR0232E 0 of 47 files saved by backup utility
    BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
    BR0231E Backup utility call failed
    BR0056I End of database backup: beccdcmb.aff 2009-12-10 05.20.33
    BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
    BR0054I BRBACKUP terminated with errors
    BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
    BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20091210030000 -d util_file -c force -p initIRPweekly.sap -cds'
    BR0280I BRBACKUP time stamp: 2009-12-10 05.23.07
    BR0292I Execution of BRARCHIVE finished with return code 5
    regards

    Hi,
    > BKI5005E: Tivoli Storage Manager Error:
    > ANS1312E (RC12)   Server media mount not possible
    Have you checked tape is properly mounted on TSM ?
    Check below guide on page 69.
    http://www.redbooks.ibm.com/redbooks/pdfs/sg246554.pdf
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Dec 12, 2009 12:25 PM

  • SXMB_MONI - Message has error on outbd. side

    Hello,
    We have occurences when interfaces appear to be successful in the SXMB_MONI monitor for processed xml messages.  The status flag = successfull.  But there is a column just in front of "Message ID" that also has another status flag. 
    When this flag is red and you hover over it, it shows the following "Message has error on outbd. side".  How can we locate a corresponding log and get some more detail behind this message?  We cannot seem to connect the dots between this red flag and a corresponding log entry to give us details of the problem.
    When it says "outbound", which system should we be examining (PI or the receiving system)?
    Thank you,
    John

    Hi,
    Select the Messge in MONI and MenugotoOutbound Channel monitor
    Double Click on the Idoc Number, this will take you to SM58 Screen
    Here you can be able to seee the reason why it got errored out at Outbound Side.
    Now in SM58Edit-Execute LUWs
    Selection screen will appear and here select all the check boxes irrespective of any Error and select the date that when these message got into Error state and all.
    And Now Execute that either in Foreground or in Background
    This will execute all the Errored messages at Outbound side will process and the Idocs will reach to R/3
    XI :  How to Re-Process failed XI Messages Automatically
    Regards
    Seshagiri

  • Message has Error Status Outbound Side

    Hi All,
    I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
    This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
    Thanks,
    Sudheer.

    Hi,
    Where are you find the Error and
    > Process engine all steps completed Sucessfully and created Idocs in XI....
      Can you explain in detail
    Regards
    Sangeetha

Maybe you are looking for

  • Channel stopped by administrative task.

    Hi dear experts, I got following error in message: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messag

  • Can't install certificate on E61

    Nothing I do seems to work when I try to install our server's self signed certificate so I can use our Exchange Server I have exported the certificate no problem on a Windows machine. Understand that no problem I have tried via a webserver download c

  • Feature Request: In-App Time Keeping with Cloud Accounting Sync

    Has Adobe ever considered adding In-App Time-Tracking to their applications? I'm currently in the middle of catching up on my time-tracking. I'm two weeks behind- Don't judge me, you know you ALL do this . Anyway, I'm having a hard time remembering h

  • Re:Method for extracting all hyperlinks and hypertext available in html pag

    i want to extrct all the hyperlinks and hypertext available in html page which is displayed in a JEditorPane. i have done this using reg.expression and it is working 90% correctly but the problem occurs when a image is a hyperlink or span tag is used

  • 4.0EA3 Bug - UK Column Not Applied on Entity

    When I create a unique identifier (UID) before creating the UID attribute, then create the UID attribute, re-open the UID and move the new UID attribute into the UID, click OK or APPLY in UK constraint dialog and OK or APPLY in the entity dialog, I g