Message in Message Monitor/ RWB stay forever in status DLNG

Hi,
We have a problem with a Message inside our J2EE Adapter. The message remains in the status DLNG forever.
We use SAP XI 3.0 Service Stack 13.
We have the following scenario:
When sending messages via the Oracle JDBC connection to the Receiver-Service, the
message keeps the delivering status and never fails if the message
fails on the database level. In this particular case, the message failed on the DB level due to a misconfigured trigger and due to unique constraints. The state of the messages can be resolved by cycling the entire J2EE engine.
How can I handle such a message that stay in DLNG status?! And why is it hanging there? I cannot restart the message, I cannot stop it I also cannot cancel it out of the RWB.
regards
Nesimi
Message was edited by: Nesimi Buelbuel

any solution to the problem mentioned here ?
we are also facing the same issue.
have tried all kinds of restarts.
any further help will be appreciated.
thanks,
gaurav

Similar Messages

Java.lang.NullPointerException in Message Monitoring-RWB

Hi Experts,
I am getting java.lang.NullPointerException in Message monitoring.Here is the detail trace of the error message.
Stack trace for the above error message is:
java.lang.NullPointerException
     at com.sap.aii.mdt.util.SelectModel.getComponentLabel(SelectModel.java:192)
     at jsp_monitor_new1226507446052._jspService(jsp_monitor_new1226507446052.java:174)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
     at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1226507436137._jspService(jsp_FC_Secure1226507436137.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Wait...
Query being processed
Please help me how to resolve the issue.
Thanks,
Bharath.

Hi Bharath,
Check SAP note no.1250954 for solution. It has the solution to the problem you are facing might be ralated to the SP levels you have, you need to installl some patch from this note.
Thanks!

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

How to add proxy node in message monitoring RWB

Hi all,
in RWB message monitoring , i can see two options in drop down list those are integration engine and adapter engine. i want to add one node for proxy run time also.
can anybody let me know how to add a node for proxy runtime?
any document or help will be appreciated
Thanks
sandeep sharma

Hi,
connect your SAP application system (like ERP, etc.)
to SLD - the same one as PI uses (you need to have PIRWBUSER on ERP too)
then start transaction SPROXY and build and interface on it
start it and check if you see the new node in message monitoring
Regards,
Michal Krawczyk

Radio button not display in message monitoring(RWB)

I show Message Monitoring in runtime workbench.
I found many entry in 'Configure Table Columns' area.
But first column's radio buttons are not displaied.
I need to show radio button.
thanks.

hi,
this problem might due to your jdk version installed chk whether it is 1.4.2.x if it is more than it den re install the above mentioned version since dat does support n bcoz of which the radio buttons are not being shown.
Regards.
Siddhesh Naik

Urgent - Messages in RWB in "System Error" status - Resending

All,
I am trying to resend the messages in Message Monitoring of RWB which are in "System Error".
Message selected and Clicked on resend and it would not ask my password.
We are on SP19 of XI 3.0. Is it something new with the SP19?
I am pretty much sure that it used to ask for password earlier. And we dont have SSO (single sign on) enabled.
reg,

Naveen,
Have you seen this weblog:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also if you give the password once you dont need to give again. So that might be the reason why it is not asking you. Close all your browsers and open once again and give a try.
---Satish

XML Monitor time (sxmb_moni) and Message Monitoring (rwb) not same.

Hi,
I have changes the TIME ZONE using STZAC but then the xml monitoring time log still doesn't match with the system and java engine time.
Please help.
Thank you and Regards
Fernand

Hi
Follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3cced290-0201-0010-99bc-ff88c32a4495
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Regards,
Santosh.

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Java.lang.OutOfMemoryError during message monitoring in RWB

Java Engine Problem during message monitoring in runtime workbench!!
Posted: Nov 12, 2007 2:13 AM Edit E-mail this message Reply
Hi,
Our integrating processes are processing successfully.
But there is a problem during message monitoring.
When I use message monitoring in RWB,
Integration Engine monitoring has no problem.
But there is a problem during displaying adapter engine monitoring.
The message is "java.lang.OutOfMemoryError: Java heap space".
So I cannot see any adapter engine message.
Actually same error occurred 3 weeks ago.
At that time, we solved the problem with restarting java service.
Does anyone know about this appearance?
And is there any other solution about this problem??
Thank you.

Hi,
As per the error analysis, it seems that the java heap space is low. So need to increase the heap size.
1. Go to the C:\SAP\JP1\JC00\j2ee\configtool folder
2. Start configtool.bat
3. Go to cluster-data -> template - template_javaee -> instance - IDxxxxx
4. Go to the VM Parameters tab and edit the maxHeapSize property
5. Save and restart the system.
I hope this will solve the problem.
Regards,
Sarvesh
***Reward points, if it helped you.

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

[RWB] New Selection in Message Monitoring

Hello,
in a system of a client I saw a selection "Database (Overview)" in Message Monitoring
of RWB. This view displays all successfully or failed messages of all services and interfaces.
How can I implement this function? Our company got a higher patch level so I don't
think that this function depends on a newer version.
Does anyone know how to configure this?
thx
chris

Steve,
If there is an error in the authentication configuration of some specific destinations on the J2EE then that may probably why the normal authentication fails and the system then tries to logon with the default user 'J2EE_GUEST' but fails as well ( which is ok ). See note 928862
Also Make sure that USer has this Role- SAP_XI_MONITORING
This SAP Note may help you-768456
Hope this helps......
---Satish

Data Persistency in Message Monitoring of RWB

Hi All,
I am dealing with Sync. Interfaces and need to monitor the messages from Message Monitoring.
I have 2 Problems in the monitoring : -
1.     I can only see the messages for last 2 hrs in Message Monitoring.
        Messages Older then 2 hours are not getting displayed.
2.     Also if i am unable to see complete set messages in the 2 hr interval.I mean randomly
         messages are getting lost in message monitoring.
Is there any setting we need to maintain for Message Monitoring?
Helpful Answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hi
have a look at this SAP Note 1031773 - Activating the message overview in RWB message monitoring
message struck in adapter eng.(RWB message monitoring)
http://help.sap.com/saphelp_nw70/helpdata/EN/45/0ea84637643c0ae10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/be/38f0d8cbfe11d2a5f80060087832f8/frameset.htm
Thanks
Edited by: Abhishek Agrahari on Jan 8, 2009 8:14 AM

Message in Message Monitor/ RWB stay forever in status DLNG

Similar Messages

Maybe you are looking for