Message is not getting displayed.
Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT NUMBER(10,2);
TRMS NUMBER;
I_RATE NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Hi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why?
Similar Messages
-
Dynamic mandatory field error message is not getting displayed in webui
Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P -
Message details not getting displayed in Message monitoring of RWB
Hi,
I am trying to see how many messages in Message Monitoring by selecting Integration Engine option, Message counts are getting displayed like how many has been processed successfully,processed with errors as well.
When I click on message count a pop up screen opens and gives me no messages are not available even for the same day messages.
Can any body give me an idea like where i can set any parameter to display in detail of messages in integration engine for one week back as well.
Thanks...>When i click on count of messages which got processed with in one hour then it shows details of that messages, but when i select other messages which got processed on the same day but more than one hour then its not displaying any details of the messages.
I guess in this case your retention period is set to zero in SXMB_ADM. And this is the reason you cannot see the message even if they are an hour old.
>Is there any where where we can set parameters or any oss note to be implemented in order to see details of any messages with in a week or 10 days.
In XI run tcode SXMB_ADM and then follow "Integration Engine Configuration ---> Specific Configuration". Now check the Archive & Deletion Current & Default Values and set the Retention period as per you need.
For more information see page 11 of this document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true -
hi all,
i have the leave request approval page linked to the workset and role Manager sel-service. im getting the preview of the page in the portal content administration. But when i login as MSS user, the role and workset are being displayed but the page is not being shown,im getting the following
"Critical error message" :
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1019)
at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:921)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:890)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1083)
at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
... 66 more
Please help me resolve this...
thanks,
nandanif you leave configuration is done .
there will be some There was an incorrect data in your system . to do this please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver .
after there will be some incorrect workitem in appover inbox.
you need to clear that also by Tcode - SWWL.
Regards,
Vivek Jadhav -
Error message is not getting displayed in customized subscreen
Hi Experts,
I have created customized sub screen for transaction BP. There are two fields namely CPS applicable and PPS applicable.
I am validating both fields against value if user enters same value as Y and Y . Then Error message should display
saying that 'It should not be same and please change the entry'. Its working fine when press enter on the sub screen.
But its not working where if users try to save the entries without entering enter button.
Please help me anyone regarding this issue.
Thanks
Ramesh ManoharanHi ,
you can do validations at Save Using BADI or Events ( please ref DEZ_'s Posting), in my case im using BADI to do validation , reason is...user was able to save witout going to the custom tab , thats y im using BADI and Screen(Custom) Validations.
regards
Prabhu -
Custom message is not getting displayed after raising do_not_save
Hi all,
In Order_save BADI, based some conditions, we were throwing custom messages.
FYI., code used,
CV_OWN_MESSAGE = 'X'.
MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
system throwing message like "The document could not be saved" only after execution of above message statement.
How can I overwrite this system message.
Any help would be highly appreciated.
-MahiHi,
Please check the below notes
1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
1650635 - Work Center: problems when using BAdI ORDER_SAVE
Rg,
Karthik -
Problem in BADI, error message not getting displayed
Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
AND l_s_eban-matnr EQ space.
MESSAGE e000(zm_msg) WITH 'You cannot create'
'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji -
Support messages not getting displayed in Messages Tab - Solar01/02
Hi,
I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
Please help. Points will be awarded for useful answers.
Regards,
J.PrabananthDear Prabanath,
I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
Let me know if there are any issues. I might be able to help you.
N -
Message not getting displayed in BTE 1030
I am displaying a message in functional module implemented for BTE 1030.
The message is not getting diplayed. I have changed the message tyto 'S, I. W, E but still it does not display. The sy-subrc is 0 after passing the messga statement.
(The functional module is called normally and not in background)Just check your settings in transaction FIBF, and make sure you have choose the right Process Modules(Ususally we choose "of an SAP Application"), and if you have set some other limitation on Country ISO code or Application Indicator, pls make sure all of them have been satisfied.
-
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Work item not getting displayed in the portal
Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
<ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
<Actions>
<Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
<Properties>
<Property name="WebDynproApplication" value="ApproveFormApp"/>
<Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
<Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
<Property name="openInNewWindow" value="yes"/>
<Property name="display_order_priority" value="5"/>
</Properties>
<Descriptions default=""/>
</Action>
</Actions>
</ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION ApproveFormApp
PACKAGE sap.com/pa~asr~formstep -
BOM is not getting displayed in case of centralized planning plant.
Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh KapoorHi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh -
Condition type freight is not getting displayed in print preview
Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Utshi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P -
JSP is not getting displayed in add portlet repositery
Hi,
I have registered two servlet in provider.xml and I was able to
view that servlet as a portlet in add portlet repositery.
After that I wanted to add one more JSP as portlet under same
provider. So I have kept JSP in same directory where servlet is
kept. I have added JSP as portlet in Provider(i.e. provider.xml)
and given appPath and appRoot for that JSP. Whenever I am trying
to view my provider by giving following URL
http://servername/servlet/myprovider
I am getting message -
Congratulations! You have successfully reached your Provider's
Test Page.
in same page I am able to view my all portlets. in that list I
am able to view my JSP as a portlet.
Now I want to add JSP portlet in my page at that time that JSP
portlet is not getting displayed in add portlet repositery.
Can anybody tell why JSP is not getting displayed in portlet
repositery ? What should I do to get it displayed in portlet
repositery ?
Thanks in advance.
BirenYou have to refresh the Provider. They are a couple of ways to
do it.
1. Take a look at the release notes for PDK-Java.
http://portalstudio.oracle.com/servlet/page?_pageid=468&_dad=ops&
_schema=OPSTUDIO
It mentions and auto reload feature that will refresh the
provider on the PDK-Java side when you make changes to the
provider.xml. When you add portlet, you simply refresh the
repository in portal and add the new portlet to a page.
2. If you do not have the auto_reload parameter, you simply need
to refresh manually.
a. After updating the provider.xml, restart the HttpServer where
your PDK-Java Provider is located.
b. Refresh the Portlet Repository
Both these do the same thing, and should solve your problem
Sue
Maybe you are looking for
-
How can I show tree's nodes in a Popup List of values
I have a tree and in a different form for an item I want to write nodes together for example computer/desktop/asus/.... computer/pda/hp/... this must be shown in a popup list of values can you help? thanks
-
Need advice with internal DVD Drive
Hello, my dvd drive reads CD's but not DVD's (Movie or Data). It makes a clicking sound then ejects the DVD which made me think it was a hardware failure, but when I put in a CD,it is fine. I've deleted the dvd.plist and ran permmission fixer. Any id
-
I have just had a new hard drive in my MacBook Pro and had to reinstall Photoshop CS4. Despite downloading the most recent Camera Raw plug-in Photoshop does not recognise my raw files from my Nikon D 800
-
Using grouped objects as drag and drop source
I am creating a drag and drop interaction. I have an image grouped with a text area and would like to make them draggable together as a single drag source. However, even though they are already grouped, when I edit the drag and drop interaction, they
-
Cannot install acrobat on surface pro 3; error 1006
I am trying to install acrobat XI on surface pro 3 but keep getting "Error 1006. The volume for a file has been externally altered so that the opened file is no longer valid"