Message Mapping is not picking up

Hi,
I am configuring the scenario "file to SOAP" call. I have made all the configurations as per requirements. I used message mapping. When I used tcode "SXMB_MONI" to monitor the message. After the event "REQUEST_MESSAGE_MAPPING" when I seen message payloads. I am unable to see the message with requested mappings. But message status shows "SUCCESSFUL".
Appreciate for your reply.
Thanks,
M.M.Rao

Hi,
Have you tested your message mapping? If not, test it now by taking the payload from sxmb_moni. Go to IR->Message mapping->open ur mapping and test it in the Test tab.
Regards,
Divija.
Message was edited by: Divija KN

Similar Messages

Export Parameters in Parameterized Message Mapping does not work.

Hello, XI-Gurus!
I have a question: how to use an EXPORT parameter in Parameterized Message Mapping? seems it does not work...
(I use XI / PI 7.1)
For example, I have a follow scenario: a large message comes to XI from one BS (message contains a lot of rows), then this large message splits to some small messages (something about 1000 rows in one small message), and send small messaeg one by one from XI to second BS. So, after receive step I use a transformation step with Parameterized Message Mapping to get a total amount of rows in large message (it needs for making condition for loop in IP, for example). I want to use an EXPORT parameter to pass this number from Parameterized Message Mapping to Integration Process. How can I do it?
Of course, I know the way to how to make this scenario without any parameterizing, but I want to use exactly "Parameterized Message Mapping" like it writes in this help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm
This topic contains something about procedure how to use an EXPORT parameter, but this procedure does not work. I don't understand how to write this UserDefined Function, which I can set any export parameters.
I read this blog:
/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
this blog has NO solutions about EXPORT parameters. about IMPORT parameters - everything OK.
Some topics about how to use export parameters in MM in this forum marked as "answered", but this is not true.
How to export parameters from Message Mapping
Export parameter REALLY work in message mapping???????
Export parameter in Message mapping UDF
WBR,
Vsevolod

Hi Rudolf,
It still does not works.
Great thanks for all your answers! If your advice works on your PI-server, it means that my problem not in UDF.
Step by step:
1) I create in "Signature" tab two parameters: FILE_NAME, FILE_TYPE (of course, they both Export and xsd:string type)
2) Then, I goes to "Functions" tab and create new function "testUDF" with one argument var1.
3) In body of this UDF insert 2 strings:
getOutputParameters.setString("FILE_NAME" , "Order");
getOutputParameters.setString("FILE_TYPE" , "PDF");
4) in "Definition" tab I bind function "Local.testUDF" with one field in my input message and goes to "Test" tab for testing.
5) And then I have a message window "Problems While Testing":
Source text of object Message Mapping: mm_ParamMap | urn:****.*.:****:TEST has syntax errors:
Function testUDF, Line 1:
cannot find symbol
symbol : variable getOutputParameters
location: class com.sap.xi.tf._mm_ParamMap_
getOutputParameters.setString("FILE_NAME" , "Order");
^
Function testUDF, Line 2:
cannot find symbol
symbol : variable getOutputParameters
location: class com.sap.xi.tf._mm_ParamMap_
getOutputParameters.setString("FILE_TYPE" , "PDF");
^
Note: /usr/sap/PID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb1562570ca9e11deb3fe00237d301cd6/source/com/sap/xi/tf/_mm_ParamMap_.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details. Note: /usr/sap/PID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb1562570ca9e11deb3fe00237d301cd6/source/com/sap/xi/tf/_mm_ParamMap_.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
2 errors
Look at this notes, first writes that I use a deprecated API, second - about unchecked or unsafe operations.
And I have no idea what's wrong... Can you help me?
Thanks!
WBR,
Vsevolod

UDF works in Message Mapping but not in Interface Mapping

Hello,
I have encountered a very strange problem. I use a simple UDF in a message mappings which imports a class that has been imported as "imported archive".
This works perfectly fine when testing the message mapping itself.
However when I execute the message mapping within a interface mapping I get a Java Error indicating that resources are missing (com.sap.aii.ib.core.mapping.ResourceNotFoundException) This error refers to a missing class.
How can this be? Message mapping works but not when using it in a interface mapping.
Do you have any idea?

Hello,
this is what I have already tried, with the same result. But now I have come to a conclusion. It is a little bit tricky, but maybe also helpful for others:
A method of a class (part of the imported archived) itself calls a class which throws an exception. This exception however is handled by the method itself and does not affect the overall outcome.
In the message mapping itself you do not see the error message, only in the interface mapping. Result however is the same.
Maybe the trace level is set different for mesage and interface mapping.....

Changes done in message mapping is not reflecting in output

Hi all,
i have created one scenario XML to XML and i before i had done 1 to 1 mapping, i got the output also.
but when i changed few calculation in the message mapping
there is one node "name" and "Description" in source and target in both places.
i am having name in SOURCE XML as "something" but i want to change this name to "Xsomething" and in description i have something in source but i want to pass constant value "ZSUBHODIP".i did mapping in message mapping, and when i did the testing in message mapping then in target in message mapping
i got "XCOPC_C03" and "ZSUBHODIP" but when it takes the XML file which is in my system then in output XML name value "XCOPC_C03" and description "ZSUBHODIP" is not coming.
i activated it too.
even i tried with the same FILE to FILE scenario also but in this scenario also problem is same like one one mapping only then when i changed it in message mapping then previous output is coming.
is there server problem, if yes then how to fix it??
please tell me what to do
thanks

Hi,
can you test it like this:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards,
Michal Krawczyk

Problem in 1toN message mapping,payload not populated but file created

I am doing 1:N multimapping From Proxy to File scenario .Proxy send three types of data all having same stucture but depending on the value of First field we split the whole stucture in 3 parts on target side and generating three files on taget side.During testing values get Passed from the SXMB_MONI(processed) and we get whole payload data upto
"Message Branch Acording to Reciever List" .But when i check payload data in 'Request Message Mapping" we donot get any data in Payload.Taget File is generated but when we try to oen the file I get message " Unable to display the File".
can any expert help me resolve this problem.

I need to generate 3 files each having similar structures depending upon the first field 'listcode' values whose values are 'N0','MA','MY' coming in a proxy structure.The source structure is as follows::
MT_Source
>Detailrecord..0..unbounded
>listcode..0.1...xsd:string
>itemcode...0.1...xsd:string
>description1...0.1..xsd:string
>description2...0.1..xsd:string
The target stuctures are:
MT_Target_N0
>Detailrecord..0..unbounded
>listcode..0.1...xsd:string
>itemcode...0.1...xsd:string
>description1...0.1..xsd:string
>description2...0.1..xsd:string
MT_Target_MA
>Detailrecord..0..unbounded
>listcode..0.1...xsd:string
>itemcode...0.1...xsd:string
>description1...0.1..xsd:string
>description2...0.1..xsd:string
MT_Target_MY
>Detailrecord..0..unbounded
>listcode..0.1...xsd:string
>itemcode...0.1...xsd:string
>description1...0.1..xsd:string
>description2...0.1..xsd:string
I need to do mapping of such 1:n multimapping mapping.I have done mapping but getting error in moni "Split mapping created no messages".Please suggest me some right way to do mapping

App Store, Messages, Maps, iBooks not opening since Mavericks Update. Help!

Installed Mavericks yesterday from Mountain Lion. Everything worked OK then tried to download iPhoto and iMovie update. My laptop power dies accidentally and now App Store, Messages, Maps, iBooks won't even open (Bounce once then nothing). Also running ridiculously slow now!

Hi,
Try Rebooting the computer and holding down the CMD and R keys together to access the Recovery process.
7:27 pm Sunday; October 27, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

JMS message is not picked up by the listener

We have created a queue in a cluster. We have an application that listens to a queue. Messages from another application will post message into this queue which is inturn picked up by the listener process.
          We posted a message to the queue long back.But it was not picked up by the application. Then, again we sent two more messages. These recent two messages were picked up by the application.
          We looked into the queue using QueueBrowse program from weblogic samples. On running the program, it sometimes shows that the first message (which was not picked up) is still there in the queue. Sometimes, it shows that there is no message in the queue.
          Have you faced any such scenarios earlier? Please help me knowing why this is happening.
          Thanks in advance.

I also found in my queue listener's log the following exception stack trace.
          weblogic.jms.common.LostServerException: weblogic.rjvm.PeerGoneException: ; nested exception is:
               java.io.EOFException
               at weblogic.jms.client.JMSConnection.jmsPeerGone(JMSConnection.java:908)
               at weblogic.jms.dispatcher.DispatcherWrapperState.peerGone(DispatcherWrapperState.java:691)
               at weblogic.jms.dispatcher.DispatcherWrapperState.callback(DispatcherWrapperState.java:552)
               at weblogic.rjvm.RJVMImpl$HeartbeatMonitorListenerDeliverer.execute(RJVMImpl.java:1412)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
          Is this exception related in any way to the above stated issue?

Missing closing tag in message mapping

Hi experts,
I have an RFC --> PI --> JDBC scenario with the following message mapping:
SOURCE --> TRIM --> mapWithDefault [] --> DESTINATION
If the source field doesn't come, the input XML is a follows:
<SOURCE/>
And after the mapping I obtain the following: <DESTINATION></DESTINATION> that is exactly what the reciever system is expecting. This was been working fine until the upgrade to ECC 6.0 of the Sender system. Actually I don't know if it has anything to do, because the RFC XML looks exactly the same, but the user claims it has stopped working since the upgrade.
Now the same mapping, with the same <SOURCE/> input creates this output: <DESTINATION/>. This is not accepted by the reciver system and throws an error.
What can be happening? The message mapping has not changed and the RFC XML looks exactly the same....any ideas?? Thanks! Pablo

>
Stefan Grube wrote:
> >. This is not accepted by the reciver system and throws an error.
> What is the error?
> If you use JBDC adapter, it is no difference, whetehr you have <tag></tag> or <tag />, because this is the same.
If you see the payload in Internet Explorer, for example you'll see <tag />. But if you see the XML with a text editor, it should be <tag></tag>: Before this issue the receiver system was getting a "blank" value, now it's getting "null" and it can't handle it.
Sarvesh: thanks for your advice but I'm already using that function...
I'll try Pedro's, Srinivas' and Hetal's ideas, but the user has to setup the development box for testing.
I'll update later, thanks for your help. More ideas are appreciated!
Pablo

Get the mapping values from one message mapping into another message mappin

Hi All,
I created two graphical message mappings. In first message mapping i created one user defined function and set one global container parameter and I need to use this parameter in my second message mapping user defined function. But the global container parameters can be used in different user defined functions in same message mapping. So is there any way to use the values which are set in one message mapping into another message mapping. If yes, please help me how to get?

Hi Koteswara rao,
As you said global container parameters from first message mapping are not accessible from second message mapping program.
i haven't faced situation like this.but, if you have some unmapped field in target message in first message mapping,you can put global variables data in that unmapped field.
anyway the output of first message mapping would be input for 2nd messages mapping,so you can access global data(unmapped field filled with global data in 1st MM) from 2nd mapping program..
Cheers,
Jag

Mesage mapping is not failing but interface mapping is failing

Hi can any body help with the followin errro when i test the interface mapping and surprisingly the message mapping is not failing
Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_purchOrdChangeJR_to_salesOrdChangeR3_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ORDERS05/IDOC/E1EDP01/E1EDP19/IDTNR. The message is: Exception:com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue. in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsManycom.sap.aii.mappingtool.flib3.Plainer@d1221323c, ,
can any body tell me the difference between message mapping interface mapping internally
thanks andregards
nelakonda

Hi,
> MM_purchOrdChangeJR_to_salesOrdChangeR3_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field
1) Select Message Mapping and go for F7 and check is it correct and test manually by give values if possible try to paste the Pay load of the actual data and test it whether the Mapping is Sucess
2) Select the Interface Mapping and Go for F7 and check whether it is correct. Check once again the Outbound / inbound Message Types
3) Check Whether all the necessary Objects are Activated
Regards
Agasthuri Doss

Ignoring a DTD validation at message mapping

Hi,
I'm facing the following situation: as a responce for a HTTP service consume, we are getting this payload:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE ChannelAdminResult SYSTEM "/AdapterFramework/channelAdmin/ChannelAdmin.dtd">
<More tags....>
the problem is that the message mapping is not able to get the dtd that validates the payload. I did try uploading the dtd file as external definition, but it still not working.
Is there anyway to bypass the !DOCTYPE validation?
Thanks in advance,
Ariel

Hello, I have the same problem. If you have an solution for it, please post it here anyway.
In my case, the external reference is an http-adress. The server has an connection to it, but it doesn't work until now.
I tested the way over the external definition, too, but with the same effect.

Capture MessageID in a Message Map

I am trying to use a custom function within a message map to return the GUID assigned to the message. I am trying to use the getMessageID() method that SAP provides; however, my message map does not compile. I get the following error message:
"cannot resolve symbol
symbol : method getMessageID ()
location: class com.sap.xi.tf._ItemRequest2UploadQueue_
textGUID = getMessageID(); "
I am specifying com.sap.aii.util.misc.api.GUID; on the imports line of my function.
Any suggestions???
Regards,
Dan Pettingill

Hallo Dan,
unfortunately there is a buck in the compiler of the J2EE engine in XI 3.0.
The error occurs, if the Message Mapping is referencing a program of an Imported Archive or there is a syntax error in the user defined function.
Because you mentioned that the error occurs for a very simple user defined function, I guess there is an other user defined function which uses a program from an Imported Archive.
As a workaround you could put the total code of the used archive program into the user defined function.
Nevertheless, you should open a OSS message under the component BC-JAS-COR.
Regards Franz

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up

I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

same here no solutions

Message Mapping is not picking up

Similar Messages

Maybe you are looking for