Message Mapping of type ABAP Class not being shown

Hi all,
I have been trying to follow the given blog:
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
Even after doing the changes mentioned in the blog, i do not see the ABAP Class in the list of Message Mapping types.
Do i need to do anyother configuration. Pls guide.
Regards
Neetu

Hi Neetu,
You will have to enable your ABAP mapping first.
Do the following steps, pay carefull attention to the values you enter,
In
IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
enter the value of
R3_ABAP|Abapclass;R3_XSLT|XSL (ABAP Engine)
If the above doesnt work, try Abap-class instead of Abapclass in the above line.
And then follow the remaining steps, make sure that the above value is correct. Your ABAP mapping should appear in your Integration Repository.'
I suggest you go through these links:
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
ABAP Mapping Vs Java Mapping.
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
Regards,
Abhy

Similar Messages

ABAP Class not displaying in operation mapping.

HI,
I have created abap class using se24 for throwing exception message in sxmb_moni, this abap class needs to be called in operation mapping, even though i have activated this abap class in PI environtment, i couldnt see the abap class option in the operation mapping.
Could any one please let me know any change profiles requirements are required,
Thanks,
--Sai

Hi Sai,
Yes, you do have to register ABAP Class Mapping in the Exchange Profile to see this option in the Operation Mapping. Follow these step-by-step configuration guidelines:
http://www.riyaz.net/sap/xipi-how-to-register-abap-mapping-in-exchange-profile/624/
Hope this helps,
Greg

Retrive message mapping error from java class

Hi,
I'm trying to create a scenario that if exist an error in the message mapping step this error will be inserted in a Ztable. I'm thinking in to call to the message mapping from a java class to catch the exception and this java class will be used in the interface mapping.
Is it possible? If yes, How to call the message mapping from java code?
Exists other possible solution?
I need to do it because we want store all mapping errors in a Ztable. (Customer requeriment)
Thanks, in advance
Jose Manuel

you can throw generic exceptions from the message mapping like this - /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
you can then decide how to handle these exceptions

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

TS1468 Not being shown in recently release album

I recently submitted one album. This is not being shown in recently release album. What we need to do my album to be displayed in iTunes when user selects recently released albums.

Hi Bhakti,
The operation 01 is create, this means the mapping records are stuck in a create operation, i.e. something stopped the original mapping records creation and left an inconsistency in the catalog mapping tables.
I would suggest the following:
De-assign the mapping for the affected categories in the catalog authoring tool, once de-assigned, also execute the 'Map Content' selection and save/exit.
Then run report /CCM/CLEANUP_MAPPING in test mode to check for orphaned items or invalid mapping entries. If inconsistencies are found in test mode, run this again with the test flag removed.
Finally - re-map the categories again and perform content mapping. The items should then exist in the procurement catalog.

Sent E-mails not being shown

Hi, I have a MBA and since yesterday all the e-mails that I have sent are not being shown in the sent folder. I sent one to myself and I got it so it must be working but how can I see them again after I sent them? Oh and the other problem is that search function does not work the way it used to. When I typed in one word it would show me all e-mails that had that word in them including the ones from e-mail adresses with which had the word in the adress.
Does anyone know how to get this to work?
That would be great! Thanks!
P.S.: English is not my native language, sorry for mistakes

Hi McGrey24,
A couple of important questions to get us on the right track.
1.) What type of email account are you using? Who's the service provider?
2.) What are you using to search? The Spotlight feature inside mail or the OS-wide Spotlight search?
The Mail search requires a little tweaking, by default it doesn't give you access to your entire account just specific mailboxes. There are ways to control if you want to search all mailboxes or if you're looking for the text string as the subject (or just content).

PDF Export Options not being Shown

Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
Pleae advise best course of action at this point.

before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

Non-Admin not being shown update button on XP

Non-Admin users on XP are not being shown the option to trigger an update.
The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
When a new update is available a link to the download page is shown in the About box rather than a button to start the update.

That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.

New Leave Request not being shown in UWL

Hi ,
I have an issue in which when manager tries to approve a leave request from UWL ,in the Pop up i,e in Request Waiting for approval" table the latest requests are shown but the same request are not being shown in the UWL.
I checked in SWI5 for the user and whatever leave requests are shown in popup are there for the user but the same is not updated in UWL.The user has refreshed the UWL but still it didnt show the new leave requests
I dont want to reregister the webflowconnector in UWL configuration as we generally use reregister to register a new task in the UWL .
Can someone please help me in resolving the issue.
Thanks,
Satish Kumar

Hi Siddharth,
Thanks for your reply.
DYNPARAM parameter value as suggested in the note 1140959 is already maintained against the tasks TS12300097 ,TS12300116.
we have done Refresh from the UWL iview but still its not showing the latest Leave Requests but it is coming in the popup window when one of the existing leave requests in UWL is selected.
Thanks,
Satish Kumar

How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

2nd generation iPod not being shown on iTunes 11.4
How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
Hope this help

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Process Type ABAP does not work properly via process chain

Dear SDNers
I am running a process chain and it contains process type ABAP program. ABAP program was running correctly till now via this process chain. ABAP program process type generally takes approximately 2 hours to run. But now, this process type for ABAP program just run for less than 1 minute and finishes successfully. The issue is that ABAP program does not run at all.
I ran the ABAP program in background and it took approximately 2 hours to run. ABAP Program is local means in our BW system and does not involve Remote Function call. We have BI7.0 system
Has some one came across this type of issue?
Best Regards
Pradip

Has the aleremote user or which ever user you have defined for background scheduling changed permissions recently?
What happens if you create an adhoc chain and include this ABAP variant, does it run then?
What does the log say in SM37 when run via process chain?
Cheers
Craig

Error about base class not being found in custom class when extending

I have gone through the process of extending the base View Object oracle.apps.icx.lov.server.ExpenditureTypeNoAwardLovVO. My extension object is: snl.oracle.apps.icx.lov.server.SnlExpenditureTypeNoAwardLovVO. The extension was done to change the query used in this LOV. I get the following 3 compile errors when I rebuild my project. Error: can't read: C:\JDevOAframework\jdevhome\jdev\myprojects\oracle\apps\icx\lov\server\ExpenditureTypeNoAwardLovVORowImpl.java
Error(2,35): cannot access class oracle.apps.icx.lov.server.ExpenditureTypeNoAwardLovVORowImpl; file oracle\apps\icx\lov\server\ExpenditureTypeNoAwardLovVORowImpl.class not found
Error(10,60): class ExpenditureTypeNoAwardLovVORowImpl not found in class snl.oracle.apps.icx.lov.server.SnlExpenditureTypeNoAwardLovVORowImpl
I have the oracle.apps.icx.lov.server package in my project and it has the following 3 files in it:
ExpenditureTypeNoAwardLovVO.xml
ExpenditureTypeNoAwardLovVORowImpl.class
ExpenditureTypeNoAwardLovVORowImpl.java
I do not have the last file (the .java one) on my local drive under C:\JDevOAframework\jdevhome\jdev\myprojects\oracle\apps\icx\lov\server.
Is the .java file not supposed to be in the package? I'm not sure how it got there since we don't have access to it on the server, etc.
If anyone has any suggestions your help is greatly appreciated!
Thanks,
Paula

The second 2 errors were solved by copying the ExpenditureTypeNoAwardLovVORowImpl.class to my myclasses directory under oracle/apps/icx/lov/server and then recompiling.
I'm still not sure why an empty .java file was added to my project causing the first error. I was doing this extension on a machine with Windows 2000 and I had created a new workspace (other than toolbox.jws) when I got this error. When I did the same extension on a machine with Windows XP and in the toolbax.jws workspace, the empty .java file didn't get added to my project and I didn't get the first compile error. Not sure if one of these variables was the cause.

Message Mapping of type ABAP Class not being shown

Similar Messages

Maybe you are looking for