Message No: 8I000 - No data selected for printing

Dear All,
I need inputs for resolving this.....please help me out...
Issue Description:
When i am doing J1INCERT, for one company code it is working properly...but for one specific company code it is giving the error that No data selected for priting (message no 8I000) that to specifically in one client only....where for the same company code in another client it is working.
I've checked all the settings, and tables which are client specific, and finally i didnt succeded in finding the route cause of the error.
Can someone have any idea why this error is coming.....and can give some insight abt this to resolve.
Thanks
Raja

we sorted out the issue

Similar Messages

No data selected for printing message no 8I000

Dear All
At the time of printing J1INCHLN certificate getting error NO DATA SELECTED FOR PRINTING MESSAGE NO 8I000 , where we have data in vendor's A/C and TDS is deducted at vendor's A/C .
Some vendor under the same section allow us to print the certificate, but the in case of few vendors we r
facing the problem.
As we need to send the same to vendors help is needed.
VG.

we sorted out the issue

No data selected for printing in production server t.code J1INCERT

Dear Gurusl,
I am facing a issue to tds certificate printout through t.code J1INCERT in production server. My client has booked the invoice in the month of march 2011 & remittance, bank updation is done in the month of 30th Apr. 2011. But while taking the printing out it the error No data selected for printing 8000I. So I need some permanent solution.
For invoice booking fiscal year is 2010 & remittance, bank updation it is 2011.
Regards
Sachin Patil

Dear:
Check whether you have selected the relevant tax types for invoice posting while posting the vendor invoice. If its correct then Vendor Master data, Section/Business Place code Address data. Check tables in SE11
J_1IEWT_CERT_N
J_1IEWTCALID_N
J_1IEWTNUMGR_N
In these tables section codes might have been maintained directly. Please check these for any discrepancies.
Regards

Need a single point of view on date selections for Delta and Full load IP's

Hi Experts,
Every year we are facing issues on date selections for data extraction, for example the Delta or Full selections for particular IP is like 2005 to 2008 , in this situation, for the year 2009, this IP is picking 0 records as the selections are upto 2008 only.
My requirement is, I need to check the selections of all the IP's in the system and want to change on need base if the selections are getting expired instead of going and checking manually to each and every IP as the system is having around 3000 IP's, which is a tedious job.
Guys, please let us know if there exits a Table/Program or any other way to check it.
Inputs appreciated.
Regards
Nandu

Hi
Persistent through module RSSM_SHIP_PSEUDO_DVERSION_WRI
Primary table RSLDPIOSH
RSLDPIO Links datasource to infopackages
RSLDPIOT InfoPackage Text Description
RSLDPRULE ABAP source code for InfoPackages
RSLDPSEL Hardcoded selections in InfoPackages
RSMONICDP Contains the request-id number by data target
RSPAKPOS List of InfoPackage Groups / InfoPackages
http://help.sap.com/saphelp_nw70/helpdata/en/2e/20d704d45be7458582cdfcc5487090/frameset.htm
Hope it helps

Hw can I generate XY graphs directly in a vector data format for printing ie pdf

A further question re. Printing of Graphs
There are many similar questions but none where the answers are acceptably adiquite or two or three were the link was broken,
"Developer exchange forums have been moved" and a pointer to the new
site, unfort it was hard to find or guess the rest of the link.
So here is my angle on this problem;
So far I have tried;
Using property node: "App. Printing.Default Printer" to select the printer to use, then
Using Report Functions to print controls;
New Report, to generate a new report reference
Set Report Orientation
Set Report Margins
Set Report Font
Set Report Header Text
Set Report Font
Set Report Footer Text
loop for each page
Set Report Footer Text, With page number
Append Control Image to Report, several times
New Report Page
Until the end of the last page
Print Report
Dispose Report
Initially using existing XY-Graph controls from the front panel. These
are on a page of a Tab control to hide these controls while not in use
and allow them to be hidden while generating the printout.
Unfortunately when this page is hidden any graph scales set to
autoscale don't, (normally don't need to and would otherwise be a waste
of processor time), resulting in graph plots going off scale or
becoming a line along the axis.
An issue is that what is printed appears to be read from the screen, so resolution is much
lower than required for for printing, resulting in rather pixellated
printed versions. These prints will usually be emailed, so tried the
pdf995 "printer driver" but the resulting pdf file size is rather large.
Currently trying Plot-XY on a much larger picture so as to get
adequate resolution for printing, however suspect this will result in
much larger pdf files and probably cause other problems.
The preferred solution in this case will probably be to generate print
output, instead of based on raster images (ie jpg or png), but on a
vector format, maybe via postscript or directly in pdf format.
Similar graphs currently printed from Excel via pdf995
(or OpenOffice) result in files around 20 kb per page. these can be printed at any size
(at least upto 64 times) without becoming pixellated, so assume these
are vector based.
Currently a page with 4 XY Graph controls uses around 40 to 45 kb per
page but resolution is poor and overcoming that may push file size up
to 150 to 200 kb per page, and the whole job can be 50 to 100 pages.
Are there any functions to generate XY graphs directly in a vector data format preferably in pdf or via PostScript format.
Cheers
Darryl

Hi Darryl,
I was able to reproduce the issue you were seeing, in which a report generation was taking up a large amount of space per page in a PDF utility. I found; however, using my attached VI (notice that it is set to *.png) and the CutePDF utility (free download at http://www.cutepdf.com/) I was able to get a per page size of about 10 KB. Also using the png I found that the image quality seemed to be quite high.
Please try incorporating this solution into your application and see if it reduces your file sizes.
Thanks and have a good evening!
Cheers,
Jonah
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval
Attachments:
print_XY Graph.vi ‏23 KB

No output has been selected for printing in Proforma Invoice

Hi,
I have created PO for STO and delivery (Delivery Type NL) through billing VF01, billing type (JEX) and creation of excise invoice, T-code u2013 J1IIN with reference to Proforma Invoice, it is working fine.
I have maintained the billing output (JEX) in condition records (T-Code- VV31). When I have save the proforma invoice and selected the issues output system showing Error u201CNo output has been selected for printingu201D Message no. VF302"
Can any body tell me what is problem for configuration steps or I have missing any steps?
Useful answers duly rewarded
Regards,
Devendra

Hi Devendra
check the following things :
Go to VF02 ->header data ->output-> click on analysis
Check the access sequence (key combination) in your output type details.t.code V/40.
check wheather the output procedure has been assigned to the output type or not
check the condition record has been maintained or not VV31 . If maintained check the key combinations entered, transmission medium also .
Regards
Srinath

No output has been selected for Printing

I have copied standard output determination procedure for invoice,maintained output condition record & access sequence -billing document type.
I got above message in VF02/ VF03 while selecting "Issue output to'.
My requirement is to get output selection window.(automatic output).
Thanks,
Vrajesh

Hello Vrajesh G. Nayak
1. Go to VF02, Header-output- there see if your output type comes or not.
i. if it comes, select it manually- go to communication select printer- then you can see the yellow light indicator at output screen. Then check the print preview, if ok print.
ii. If the output types doenst comes as per 1 then go to SPRO and check the output control and VV31 maintenance.
2. If it is required to set the automatic printout select the option "Print at creation/saving the document" in communcation tab while maintaining VV31.
Hope this helps.
Regards
raghu

Automatic change of data selection for full update

Hi,
I have created datasource for full update and load data mannulay on weekly basis by date selection in infopackage.
If I want to schedule the job on weekly basis, is there any way to change the date selection in infopackage for each data load.
i.e. if the previous range was 1st to 7th for full update, then next it should become 8th to 14th.
Regards,
Pravin.

Hi,
Go to that infopackage - dataselection tab - calday field - there will you will type (near to TO value ) - there enter 6 for abap routine and give the name..
Eg :
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'XXXXXX'. " XXX- techname
              l_idx = sy-tabix.
data : date_low like sy-datum,
        date_high like sy-datum.
        date_high = sy-datum - 1.
        date_low = sy-datum - 5.
        l_t_range-low = date_low.
        l_t_range-high = date_high.
        l_t_range-sign = 'I'.
        l_t_range-option = 'BT'.
          modify l_t_range index l_idx.
          p_subrc = 0.
Here in the above eg , we are loading daily data from the interval of last 5 days.. ( from 03.02 to 07.02.08)
Hope you have got an idea..
Regards,
Siva.

Start Data Selection for Header Tabels fail

Hi!
The above mentioned activity fails because tabels COEP and COBK are vergy large and it seems that I run into a time out.
I found the note:
1166229 - Customizing the select statement within Fill Header Reports
I' am not a CO spezialist and I don't know which field I could take to add additional selection criterias on this tabels.
As much as I understand this tabel save CO data and since I transfer with TDMS just the last 2 month of our production system, my idea is to select e.g. just year 2009 for COEP and COBK.
Any hint or proposals??
BR
Werner

Hi,
1. Check if all the recommendations as per note 890797 are followed.
2. If yes, run the troubleshooter for the activity.
3. Here, under "Change Technical Settings for Conversion Objects", change the size category for the table to Large.
4. Go back to the Troubleshooter screen and run "Troubleshooter for Conversion Objects" -> "Automatic Repair"
5. Restart Data Selection
Hope this resolves the issue.
Regards,
Suman

Error message when trying to issue output for printing in the VT02N

We have one issue where user is trying to givng print out for shipiing details in the tranaction VT02 n
in EXTRAS---> output , there are giving the out put type ZS04 and when they save the output type they are getting the following error messages
Mandatory: Proforma saknas
Mandatory: (5.Varuposter) - Commodity code saknas i delivery:
output type is configured in nace transacition with the print program and the forn name
Please tell me why this error is coming
thanks in advance
pavan

Hi,
Check if you have entered values in all the mandatory fields required.
If you have try debugging and check where error is coming.
Just type /H in the command bar and click enter when you clcik on goto-extra it will got to debugging.
In that put breakpoint at message.This will put break points at all message statements.
Then you can find out very fast where the error is coming from
Regards,
Subhashini

Dynamic Data selection for the Filed entered in Selection Screen.

Hi All,
My requirement is as follows.
1 select options in Selection Screen for MATNR (SO_MATNR)
1 parameter field in Selection Screen for entering a MARC field name. (P_FIELD)
Now the Program has to display the values of this Field (Entered by the user as P_FIELD) from MARC table, where MATNR is in SO_MATNR.
I understand that this would require a dynamic select statemant but could not figure out the correct way.
Please help me with the code for this requirement
Regards,
Sunil

Not sure If I understand correct, but here's an example on what I think you are looking for. I don't have an ECC system here (we're on CRM), but you should adept it to your tables and fieldname.
TABLES: but000.
DATA: lt_feld TYPE TABLE OF name_feld,
lw_feld LIKE LINE OF lt_feld.
SELECT-OPTIONS: so_part FOR but000-partner.
PARAMETERS: field TYPE name_feld DEFAULT 'MC_NAME1'.
SELECT (field) FROM but000
INTO TABLE lt_feld
WHERE partner IN so_part.
LOOP AT lt_feld INTO lw_feld.
WRITE:/1 lw_feld.
ENDLOOP.

Keeping 1 photo selected for printing AFTER editing

I still haven't adapted comfortably to iPhoto '08, because it's hard to change one of my iPhoto habits. Previously, after selecting a photo to edit, I'd click DONE and then go straight to File>Export or File>Print to output the edited photo. With iPhoto '08, no photo is selected after clicking DONE, but my habit is still to go straight to File>Export or File>Print anyway. Only after the export or print process begins, with a report that iPhoto has 86 photos to transfer, do I remember that iPhoto 08 acts as if the entire album or event has been selected after an Edit session--even if I only edited a single photo.
Software design should be incremental, not decremental, for the workflow to become more efficient. I think Apple knows this, so it must be something I'm overlooking. A preference setting, maybe? Can anyone offer a suggestion so that I don't waste more time (and photo paper and photo ink) having to reverse an ingrained habit? I'm a semipro photographer and this habit has been established over several years and versions of iPhoto, with thousands of images. Photoshop is great for only a portion of my photos...iPhoto can do the basics better and faster.
Thanks for any helpful suggestions.

I hardly ever use the Events mode, but I tried it just now. The yellow selection box stays after editing in Events mode, so it works there.
I went back into Photos mode, double-clicked on a photo to edit, just clicked Done without doing any editing, and the single photo stayed selected. It's when I actually do something (rotate, enhance, straighten, adjust, etc.) that clicking Done gets me back to the thumbnails without the yellow selection box.
The more I think about it, the more I think the iPhoto app and/or one of its components has gotten corrupted. Now, if I can only find my iLife '08 DVD to re-install iPhoto, I'll let you know what happens. In the meantime, I'm going to try removing preferences to see if the problem lies in a plist file somewhere.
Thanks for the great ideas! Appreciated.

ICR Process 003 - Running Data Selection for Accounts without a Group CoA

Hi Everyone,
I am getting an error "Account 'CoCode'/xxxxxxxxxxx: Group Account Number could not be determined" on the reconciliation of some accounts when I run FBICS3.
Currently, the operating chart of accounts is not assigned to a Group Chart of Accounts. This may change after Go Live u2013 for instance due to consolidation requirements. But for now we are without group CoA.
I am wondering if this is a requirement for the ICR program to have this field active on the GL master data and populated?
If not, is it possible then to switch off the error message or change the settings somewhere so that the error is not generated?
How will this effect accounts without a group account number?
I've included a link a screenshot below
Link:[http://i42.tinypic.com/rh3gp0.jpg]
Thanks in advance!
Best,
John Scime

Hi John Scime,
I suggest you to review SAP Note 1164893. Check if this note is applied in your system, otherwise, apply it and pay special attention to the manual steps(solution part of the note).
Message FB_ICRC10 can be customized according to your requirements as warning, error message and so on.
These are the manual steps of the note 1164893:
    o Start transaction SM31.
    o Specify view T100S.
    o Choose function Maintain.
    o Choose function New Entries.
    o Add the following entry:
       Application Area Msg                  Allowed StandardSwitch Off
       FB_ICRC           102                  AESIW E X
    o Save the changes.
    o Start transaction SM31.
    o Specify view V_T100C.
    o Choose function Maintain.
    o Specify Application Area FB_ICRC.
    o Choose function Continue.
    o Choose function New Entries.
    o Add an entry for message 102 and specify the attributes which best meet your requirements(WARNING MESSAGE, Error Message, etc). Use value help if needed.
    o Save the changes.
I hope this help you solve this issue!
Regards,
Mateus

ABAP Code Date Selection for InfoPackage Scheduler

Hello Group
I need to automate the selection of valid condition records for an extraction that have a From and To date range.
I noticed there is an option (Routine for time interval) to write ABAP code along with a template that is available in the InfoPackage.
I think the logic for the selection would be any record
Valid from <= today
Valid to >= today
Can anyone help with the ABAP code?
The template is as follows:
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
form compute_time_dependent_dates
changing p_datefrom type d
 p_dateto type d
 p_subrc like sy-subrc.
 Insert source code to current selection field
$$ begin of routine - insert your code only below this line -
 p_datefrom =
 p_dateto =
 p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.
Thank You for your help!!
Frank

I resolved the problem . I have changed the order of read table l_t_range because I need the header .
In the loop at datos I add the line l_t_range-iobjnm = 'ZXGE_UNO'.
The problem wasn't the call RFC it was that I built l_t_range bad. I need the infoObject name.
This is correct!!
READ TABLE L_T_RANGE WITH KEY
 FIELDNAME = '/BIC/ZXGE_UNO'.
LOOP AT DATOS.
 L_T_RANGE-FIELDNAME = '/BIC/ZXGE_UNO'.
 L_T_RANGE-IOBJNM = 'ZXGE_UNO'.
 L_T_RANGE-SIGN = 'I'.
 L_T_RANGE-OPTION = 'EQ'.
 CONCATENATE '00' DATOS-WA+3(4) INTO L_T_RANGE-LOW.
 APPEND L_T_RANGE.
 ENDLOOP.
*READ TABLE L_T_RANGE WITH KEY+
+*FIELDNAME = '/BIC/ZXGE_UNO'.+
+* L_IDX = SY-TABIX.+
+* MODIFY L_T_RANGE INDEX L_IDX
Thanks a lot
Ana

Automatic tray selection for printing

When the print out is issued from the SMARTFORM, it should automatically determine the tray for the paper (based on a pre-defined logic):
The trays can be:
Tray 1
Tray 2
Manual Feed
Is this possible in SAP? (version 4.6c)
Is there a dependency on the printer/model
Thanks,
Lakshmi.

Hi,
Do you want to define the tray statically?.
Then you can mention the tray at the page level.
Select the page and select 'output options' tab.
There you can mention the tray name with the resource field.
if you want to select the tray dynamically then ,refer the OSS note 367128 and apply the OSS note which is applicable for release 4.6 C.
Implement the program correction. Afterwards, you can also enter a field (for example, ) in field 'Resource'. This field must be defined in a global manner (the type must be RSPORESNAM). You must set the value of this field before you call up the page. That is, you must either supply the value on the first page via the interface or you must set it during the initialization. If you call a page via an explicit page break, you must have set the value before the page break.

I hope this should resolve your issue.
Thank you.
Regards,
Karuna.M

Message No: 8I000 - No data selected for printing

Similar Messages

Maybe you are looking for