Message Not coming to XI system
Hello,
Am Facing an issue in Production XI system. The issue is in File to RFC Interface,which is running on Daily basis,there is a daily job to Place the File on FTP server. The Problem is File is Picking by XI and File also archived in Archive directory,but Message not coming to XI system.I have checked in MONI and Sender communication channel,but not able to see any messages.The File Format is CSV,used FCC in sender channel.
Kindly help me to solve this problem,
Thanks,
Madhu
Hi Madhu
Please check the communication channel in RWB and see the channel is in error or not.
The channel should show some logs including message id.
Next check the RWB-->message monitoring-->adapter engine
The message could have failed there and hence does not present in MONI.
Finally make sure that none of other communication channels are polling in that same server.
In non-prod environment we some times use the same server credential for DEV and QA.
So if that is the case , then please deactivate the other channel so that you get the message in desired environment.
Similar Messages
-
Message not coming to Receiver system - File to RFC
I have a small problem in File to RFC connection. We are trying to create a PO using a BAPI. In the XI system , it shows the XML is processed successfully but PO is not generated in the R/3 system.
Is there any way to check whether the message has come to the receiver system. In fact we tried with a dummy insert command in a Z table . Even thats not happening. I thing the message is not at all coming to the receiver system, but the SXMB_MONI in Xi shows the message got processed successfully.
Do we need to make any settings in the Receiver system?hi,
did you commit this bapi:
a) in the rfc adapter (in your communication channel) if you have sp14
b) in the bapi wrapper if you have < sp14 ?
https://websmp206.sap-ag.de/~sapdownload/011000358700000328352005E/HowtouseBAPandccBPM.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
IDOC in 03 staus but not coming to PI system..
Hi Experts,
I am working on IDOC to IDOC scenario.All of the IDOCs are in 03 status in R/3 system but some of the IDOCs are not coming to PI system.I checked SM58 also but its fine.
Should it be in 12 staus?
Is it possible that IDOC in status 03 can reach to the target system?
Please reply it asap.Its urgent.
Regards,
VikramHi Vikram,
First of all, bd75 is only for status conversion. This means, that only IDoc statuses are changed, based on the status of the RFC call. IDocs are not despatched again by this transaction.
Secondly, you might want to check the EDI Port that is assigned in the partner profile, if it is pointing to the correct target system.
Finally, if target system is OK and you don't find anything in sm58 in sender system, then you should go to smq2 in PI and you should find your IDocs there, waiting in a blocked queue.
Hope this helps,
Greg -
SAP is not coming up after system refresh with Export/Import option
Hi,
I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Aug 05 10:48:17 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 844) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05FE0040, size: 3391480)
M DpShMCreate: allocated sys_adm at 05FE0040
M DpShMCreate: allocated wp_adm at 05FE1B88
M DpShMCreate: allocated tm_adm_list at 05FE6AF0
M DpShMCreate: allocated tm_adm at 05FE6B18
M DpShMCreate: allocated wp_ca_adm at 062BB970
M DpShMCreate: allocated appc_ca_adm at 062C1730
M DpShMCreate: allocated comm_adm_list at 062C3670
M DpShMCreate: allocated comm_adm at 062C3688
M DpShMCreate: allocated vmc_adm_list at 0630A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0630A380
M DpShMCreate: allocated wall_adm at 0630A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 05 10:48:18 2009
M calling db_connect ...
C Prepending e:\oracle\IDS to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPIDS's password
C Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Attaching to DB Server IDS (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84)
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
C Try to connect with default password
C Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Aug 05 10:48:18 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 844) [dpnttool.c 357]
I have checked database connectivity with the command 'r3trans -d', it got finished with the return code 0012 and the trace.log file is showing the following information.
=======================================
4 ETW000 r3trans version 6.13 (release 640 - 17.07.08 - 08:11:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.08.2009 - 10:52:31
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Aug 05 10:52:34 2009 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 8449 0.008449
4 ETW000 [dev trc ,00000] using "f:\usr\sap\IDS\SYS\exe\run\dboraslib.dll"
4 ETW000 37 0.008486
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 18 0.008504
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 27 0.008531
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.220)
4 ETW000 219 0.008750
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 27 0.008777
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 36 0.008813
4 ETW000 [dev trc ,00000] New connection 0 created 26 0.008839
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.008873
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 22 0.008895
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 25 0.008920
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.008952
4 ETW000 [dev trc ,00000] Setting DIR_CLIENT_ORAHOME is not set as environment variable,
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 227 0.009179
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 130 0.009309
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 32 0.009341
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 23827 0.033168
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPIDS's password 34 0.033202
4 ETW000 [dev trc ,00000] Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 35 0.033237
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 32 0.033269
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 112 0.033381
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 29 0.033410
4 ETW000 [dev trc ,00000] Allocating server context handle 25 0.033435
4 ETW000 [dev trc ,00000] Attaching to DB Server IDS (con_hdl=0,svchp=025417D4,srvhp=025423DC)
4 ETW000 51 0.033486
4 ETW000 [dev trc ,00000] Assigning server context 025423DC to service context 025417D4
4 ETW000 41860 0.075346
4 ETW000 [dev trc ,00000] Allocating user session handle 47 0.075393
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 50 0.075443
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 4381 0.079824
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 31 0.079855
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 23 0.079878
4 ETW000 [dev trc ,00000] Try to connect with default password 80 0.079958
4 ETW000 [dev trc ,00000] Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 28 0.079986
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 31 0.080017
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 32 0.080049
4 ETW000 [dev trc ,00000] Assigning username to user session 0254AFA8 19 0.080068
4 ETW000 [dev trc ,00000] Assigning password to user session 0254AFA8 25 0.080093
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 32 0.080125
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 1691 0.081816
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 28 0.081844
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 18 0.081862
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 428]
4 ETW000 119 0.081981
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 428]
4 ETW000 30 0.082011
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'IDS'"
=================================================================================
Kindly suggest me the solution to resolve the issue.
Thanks & regards,
MogileeswarPlease check the logs it is clrerly mentioned thet your sapsystem is not able to connect to database.
ERROR => CONNECT failed with sql error '1017' [dbsloci.c 11395] B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ] B ***LOG BY0=> ORA-01017: invalid username/password
Check the Note------Note 713685 - Hom./Het.System Copy SAP Web AS 6.40
run these commands:
brconnect -u / -c -l E -f chpass -o SAPSR3 -password whatever_you_want
sqlplus /nolog @sapdba_role.sql SID NT
Also check the parameter DBS_ORA_SCHEMA is set to SAPSR3.
Also read note 400241.
Thanks
Rishi Abrol -
Output message not coming automatically for PO
hi
i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
Still the output message is not coming automatically while creating PO every time i add output type namually. please guide
regardsHope you have maintained condition for combination. preferrably -
1) Purch Doc type > PORG > Vendor
2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
Hope this will help you -
HTTP to RFC scenario (Message not coming to PI)
Hi PI Gurus,
I got one HTTP to RFC scenario. Its working fine in production. where as it is not working in QA sys.
Messages are not coming to PI (SXMB_MONI). Is anything is missed in SICF or SMICM.
Thanks,
KrishnaHi,
How you are testing the interface.........if you are sending the message from HTTP client web page then check the error message in same web page.
for reference check below link.
http://www.****************/Tutorials/XI/HTTP/RFC.htm
HTTP client code.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards,
Phani -
Hi ,
In Function Exit i am displaying Message based on some condition. Error messages are coming fine when the condition is true but when i am trying to display warning messages for the same it is not coming .Could any one please tell me what would be the problem.
Thanks,
Kumar.Hi Kumar,
When you throw error message processing stops that is why you are able to see it... Do you see some other message when use warning right..? If yes than change it to information and check...
Nabheet -
Messages not reflecting in PI system.
When sending a message from R/3 system using proxies I was able to see the messages in SXI_MONITOR of R/3 system.
While debugging, message is getting transferred into the XI structure.
But, the same message is not reflecting in the PI system when searching using SXI_MONITOR.Hi,
Can you please answer me:
1) Are uy able to see any entry in SXMB_MONI of XI and any error message.
2) Have u used the commit work at the end of the report.
3) Have u created the RFC destination in XI
SAPSLDAPI
The RFC destination SAPSLDAPI is required for the connection to the SLD. It is used by the ABAP API.
4) Have u checked the Transaction SLDCHECK in XI.
5) Have u checked Transaction SPROXY
The interfaces are taken from the Integration Repository of the connected XI
system. To make sure that this connection is running correctly, use the test
reports provided in transaction SPROXY �� Goto �� Connection Test:
o Report SPROX_CHECK_IFR_ADDRESS checks if the connection to the
Exchange Profile is running and if the parameters are set.
o Report SPROX_CHECK_HTTP_COMMUNICATION checks if the HTTP
communication of the system is running.
o Report SPROX_CHECK_IFR_RESPONSE checks it the connection to the
Integration Builder is running correctly.
o Report SPROX_CHECK_IFR_CONNECTION checks if the data coming from
the Integration Builder can be correctly interpreted.
Thnx
Chirag -
Approval messages not coming back when approving by mail
Hello,
We are on SRM 4.0
Approval messages are sent from SRM to different approvers by mail. This works fine.
But when the person approves by mail this doesn't work.
In transaction sost messages are still with 'grey' status and in transaction scot messages are all in status 'in transit'.
This happens only in our Production environment.
Has anyone suggestions?
Thanks,
Laurent.Further to my previous reply , please also check the following
>
In transit
Number of send orders that are currently in process
outside of the SAP system, that is, the messages have
been transferred to the external nodes by the SAPconnect
send process but neither a positive nor a negative status
message has been received
>
check the following in your system
transaction SCOT--> in the menu
Settings ---> confirmation of reciept
have you set the value to 'SAP connect does not expect confirm.for
internet mail ? -
Client proxy message not reaching to XI system
Hi
I have done one scenario from CRM to FILE. When i am executing the client proxy through my zprogram its executing without any errors. I have checked in SXMB_MONI of CRD system i can see the messages but they are not with successful flag or not with error flag. But in XI system (SXMB_MONI) i didnt find any messages. Could you please tell me what's the problem is?
Regards
SowmyaSowmya,
As you are not getting any message in SXMB_MONI, there can be following possibilities:
1. There can be some problem in proxy configuration on your CRM system. Please check with your BASIS team that steps give in this blog are properly followed:
How do you activate ABAP Proxies?
2. Make sure that in
SXMB_ADM --->integration engine config -
>change specific attributes....
The RUNTIME parameter is defined LOGGING and TRACE_LEVEL and the value is 1.
3. Make sure the queues are registered in Tx: SMQR.
Further, I do not think that COMMIT statement or anything like that is missing as in that case you should have got a message in SXMB_MONI with a green flag stating that "Commit statement is missing". -
ALE IDocs are not coming on Recieving System
Dear Experts,
I am sending Characteristics from my QA Server to PRD server. QA systems send the IDocs and Status in WE02 comes as 03, but i am not able to see the IDocs in PRD system. There WE02 shows 'No IDocs selected'. I have seen SM58 also in QA which shows message 'No authorization to send IDocs with message type C HRMAS'. Please guide me how to come out of this. Is this an authorization problem or any settings issue.
Thanks and Regards,
AKTHi,
As your problem says that you dont have otherization to create IDoc in the receiving system.
Check the RFC Destination created in QA (SM59).
Enter Logical system name of PRD.
Check the remote login username and password.
Now Click on the remote login available at the top.
I'm sure that it is a problem with the username and login that used in the creation of RFC Destination.
If that is the case, Ask the basis person to enter a valid username and password to access the PRD system.
Regards,
Sunil. -
people have being trying to message me and saying I haven't been texting back.. but they haven't been recieving my texts and I haven't been recieving theirs.. how do I fix this?!
Hi , What type of phone do you have, I assume an iPhone right? Do you know when this issue started happening? I take it you've got great signal etc? When was the last text message you receive?& It's definitely text and not iMessage yep? Thanks,Titanium
-
BizTalk Zombie Message not coming as error in SQL Job "Monitor BizTalk Server"
Hello All,
I have Zombie message in Message box
But when I run job "Monitor BizTalk Server" no error reported.
My understanding this should be reported as error in second step. Same has been in details in URL
http://biztalkmessages.vansplunteren.net/2010/10/19/monitor-biztalk-server-job-in-biztalk-2010/
Can anyone help why above behavior is different ?
TarunWell....here's the deal. It seems the group knowledge on the Monitor BizTalk Job is pretty limited. Here's a better blog with some more information:
http://social.technet.microsoft.com/wiki/contents/articles/19700.biztalk-server-monitor-biztalk-server-job.aspx
I don't think a Zombie would immediatly qualify for any of those cases because for some period of time, it still belongs to a service instance, just one that can no longer Consume it. Eventually it may qualify for condition 4 once the Completed Orchestration
is purged.
Disclaimer: This is educated speculation. If anyone has done any testing around this, I and others would appriciate some guidence. -
I have a user with a Tour 9630 who all of a sudden stopped recieving messages on his Tour - we're a BES 5.0 enviorment, he can send e-mails out just fine. Has an active internet connection, can recieve texts just fine, can open web browsers.
What could be the issue and how do I resolve it? It was working fine until one day when it just stopped.I'm getting an " Incorrect Encryption Key " on the firewall and there's like 520 blocks... Does this maybe have something to do with it?
-
Java is not coming up after deploying Cryptographic toolkit 1.4
Hi,
when i open the keystore service in visualadministrator, i got following issue.
Java.lang.NoClassDefFoundError.iaik/security/provider/IAIK
IAIK security library not found
after searching in SDN i got the following link :
http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/frameset.htm
After deploying Cryptographic toolkit 1.4 through SDM, i have restarted the system. java is not coming up. the system is ABAP+JAVA system.
Could you please tell how to undeploy the tc_sec_java_crypto_signed_fs_lib.sda component. i have tried through standalone mode also but i could not find that component. i could not able to login to the visual admin, configtool.
Regards,
JagadishI have pasted both server0 log and default trace.
please find the log which is pasted.
SERVER0 LOG
[Thr 6276] *************** SAP_STINIT3 ***************
[Thr 6276] SAP_STINIT3: my TP_name: >jlaunch<
[Thr 6276] SAP_STINIT3: new buffer state = BUFFER_EMPTY
[Thr 6276] SAP_STINIT3: GWHOST=localhost
[Thr 6276] SAP_STINIT3: GWSERV=sapgw22
[Thr 6276] SAP_STINIT3: PROTOCOL=I
[Thr 6276] GwIConnect: connect to gateway localhost / sapgw22 (timeout=60000)
[Thr 6276] NiHsLGetNodeAddr: found hostname 'localhost' in cache
[Thr 6276] NiIGetNodeAddr: hostname 'localhost' = addr
[Thr 6276] NiHsLGetServNo: found service name 'sapgw22' in cache
[Thr 6276] NiIGetServNo: servicename 'sapgw22' = port 0C.FA/3322
[Thr 6276] NiICreateHandle: hdl 11 state NI_INITIAL
[Thr 6276] NiIInitSocket: set default settings for new hdl 11 / sock 4656 (I4; ST)
[Thr 6276] NiIBlockMode: set blockmode for hdl 11 FALSE
[Thr 6272] *************** SAP_STINIT3 ***************
[Thr 6272] SAP_STINIT3: my TP_name: >jlaunch<
[Thr 6272] SAP_STINIT3: new buffer state = BUFFER_EMPTY
[Thr 6272] SAP_STINIT3: GWHOST=localhost
[Thr 6272] SAP_STINIT3: GWSERV=sapgw22
[Thr 6272] SAP_STINIT3: PROTOCOL=I
[Thr 6272] GwIConnect: connect to gateway localhost / sapgw22 (timeout=60000)
[Thr 6272] NiHsLGetNodeAddr: found hostname 'localhost' in cache
[Thr 6272] NiIGetNodeAddr: hostname 'localhost' = addr
[Thr 6272] NiHsLGetServNo: found service name 'sapgw22' in cache
[Thr 6272] NiIGetServNo: servicename 'sapgw22' = port 0C.FA/3322
[Thr 6272] NiICreateHandle: hdl 13 state NI_INITIAL
[Thr 6272] NiIInitSocket: set default settings for new hdl 13 / sock 4516 (I4; ST)
[Thr 6272] NiIBlockMode: set blockmode for hdl 13 FALSE
[Thr 2836] NiSelISelectInt: 0 handles selected (0 buffered)
[Thr 2836] SAP_CMLISTEN: timeout after 2000 msecs
[Thr 2836] *************** SAP_CMLISTEN ***************
[Thr 2836] SAP_CMLISTEN: timeout = 2000
[Thr 5584] Fri Feb 27 19:45:38 2009
[Thr 5584] JLaunchIShutdownCheck: check shutdown, 16 sec left to shutdown
[Thr 6276] NiHsLGetServName: found port number 0C.FA/3322 in cache
[Thr 6276] NiIGetServName: port 0C.FA/3322 = servicename 'sapgw22'
[Thr 6276] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
[Thr 6276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 11 / sock 4656
(SI_ECONN_REFUSE; I4; ST; 127.0.0.1:3322) [nixxi.cpp 2764]
[Thr 6276] NiICloseHandle: closing initial hdl 11
[Thr 6276] *** ERROR => GwIConnect: GwConnect to localhost / sapgw22 failed (rc=NIECONN_REFUSED) [gwxx.c 294]
[Thr 6276] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 295]
[Thr 6276] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 297]
[Thr 6276] ***LOG S0S=> GwIConnect, GwConnect (sapgw22) [gwxx.c 299]
[Thr 6276] ***LOG S90=> SAP_STINIT3, GwIConnect ( 236) [r3cpic.c 2006]
[Thr 6276]
[Thr 6276] * LOCATION CPIC (TCP/IP) on local host with Unicode
[Thr 6276] * ERROR partner '127.0.0.1:sapgw22' not reached
[Thr 6276] *
TIME Fri Feb 27 19:45:38 2009
[Thr 6276] * RELEASE 700
[Thr 6276] * COMPONENT NI (network interface)
[Thr 6276] * VERSION 38
[Thr 6276] * RC -10
[Thr 6276] * MODULE nixxi.cpp
[Thr 6276] * LINE 2764
[Thr 6276] * DETAIL NiPConnect2
[Thr 6276] * SYSTEM CALL connect
[Thr 6276] * ERRNO 10061
[Thr 6276] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6276] * COUNTER 3
[Thr 6276] *
[Thr 6276] *****************************************************************************
[Thr 6272] NiHsLGetServName: found port number 0C.FA/3322 in cache
[Thr 6272] NiIGetServName: port 0C.FA/3322 = servicename 'sapgw22'
[Thr 6272] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
[Thr 6272] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 13 / sock 4516
(SI_ECONN_REFUSE; I4; ST; 127.0.0.1:3322) [nixxi.cpp 2764]
[Thr 6272] NiICloseHandle: closing initial hdl 13
[Thr 6272] *** ERROR => GwIConnect: GwConnect to localhost / sapgw22 failed (rc=NIECONN_REFUSED) [gwxx.c 294]
[Thr 6272] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 295]
[Thr 6272] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 297]
[Thr 6272] ***LOG S0S=> GwIConnect, GwConnect (sapgw22) [gwxx.c 299]
[Thr 6272] ***LOG S90=> SAP_STINIT3, GwIConnect ( 236) [r3cpic.c 2006]
[Thr 6272]
[Thr 6272] * LOCATION CPIC (TCP/IP) on local host with Unicode
[Thr 6272] * ERROR partner '127.0.0.1:sapgw22' not reached
[Thr 6272] *
TIME Fri Feb 27 19:45:38 2009
[Thr 6272] * RELEASE 700
[Thr 6272] * COMPONENT NI (network interface)
[Thr 6272] * VERSION 38
[Thr 6272] * RC -10
[Thr 6272] * MODULE nixxi.cpp
[Thr 6272] * LINE 2764
[Thr 6272] * DETAIL NiPConnect2
[Thr 6272] * SYSTEM CALL connect
[Thr 6272] * ERRNO 10061
[Thr 6272] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6272] * COUNTER 2
[Thr 6272] *
[Thr 6272] *****************************************************************************
[Thr 2836] Fri Feb 27 19:45:39 2009
[Thr 2836] NiSelISelectInt: 0 handles selected (0 buffered)
[Thr 2836] SAP_CMLISTEN: timeout after 2000 msecs
[Thr 2836] *************** SAP_CMLISTEN ***************
[Thr 2836] SAP_CMLISTEN: timeout = 2000
[Thr 3508] ShmCache_nativeDelete (3)
[Thr 3508] ShmCache_nativeDelete (2)
[Thr 3508] ShmCache_nativeDelete (0)
[Thr 3508] ShmCache_nativeDelete (1)
[Thr 3508] Fri Feb 27 19:45:40 2009
[Thr 3508] JHVM_NativeSetState: set process state to 6
[Thr 3508] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
[Thr 5584] JLaunchIShutdownCheck: check shutdown, 14 sec left to shutdown
[Thr 2836] Fri Feb 27 19:45:41 2009
[Thr 2836] NiSelISelectInt: 0 handles selected (0 buffered)
[Thr 2836] SAP_CMLISTEN: timeout after 2000 msecs
[Thr 2836] *************** SAP_CMLISTEN ***************
[Thr 2836] SAP_CMLISTEN: timeout = 2000
[Thr 5584] Fri Feb 27 19:45:42 2009
[Thr 5584] JLaunchIShutdownCheck: check shutdown, 12 sec left to shutdown
[Thr 2836] Fri Feb 27 19:45:43 2009
[Thr 2836] NiSelISelectInt: 0 handles selected (0 buffered)
[Thr 2836] SAP_CMLISTEN: timeout after 2000 msecs
[Thr 2836] *************** SAP_CMLISTEN ***************
[Thr 2836] SAP_CMLISTEN: timeout = 2000
[Thr 5584] Fri Feb 27 19:45:44 2009
[Thr 5584] JLaunchIShutdownCheck: check shutdown, 10 sec left to shutdown
[Thr 5840] Fri Feb 27 19:45:45 2009
[Thr 5840] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 5840] JsfCloseShm: JsfCloseShm() -> 0
[Thr 5840] JLaunchCloseProgram: good bye (exitcode = 0)
DEFAULT TRACE
#1.5#001143318A03002C00000186000015CC000463E71A6EB1E0#1235744138921#com.sap.engine.services.connector##com.sap.engine.services.connector#######SAPEngine_System_Thread[impl:5]_18##0#0#Error#1#/System/Server#Java#connector_0500##"ResourceObjectFactory" is closed. Possible reasons: the Connector Service is stopped or not started.#1#ResourceObjectFactory#
#1.5#001143318A03002C00000187000015CC000463E71A6EB538#1235744138921#com.sap.engine.services.connector##com.sap.engine.services.connector#######SAPEngine_System_Thread[impl:5]_18##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.connector.exceptions.BaseResourceException: "ResourceObjectFactory" is closed. Possible reasons: the Connector Service is stopped or not started.
at com.sap.engine.services.connector.ResourceObjectFactory.removeConnectionFactory(ResourceObjectFactory.java:401)
at com.sap.engine.services.jmsconnector.deploy.ContainerImpl.clearAllResources(ContainerImpl.java:1677)
at com.sap.engine.services.jmsconnector.deploy.ContainerImpl.commitStop(ContainerImpl.java:768)
at com.sap.engine.services.deploy.server.application.StopTransaction.commonCommitFinished(StopTransaction.java:244)
at com.sap.engine.services.deploy.server.application.StopTransaction.commitCommon(StopTransaction.java:290)
at com.sap.engine.services.deploy.server.application.StopTransaction.commitLocal(StopTransaction.java:278)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:374)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
at com.sap.engine.services.deploy.server.FinishListener.run(FinishListener.java:77)
at com.sap.engine.services.deploy.server.FinishListener.makeOperation(FinishListener.java:57)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startTransactionsLocal(DeployServiceImpl.java:4244)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.stopMyApplications(DeployCommunicatorImpl.java:214)
at com.sap.engine.services.servlets_jsp.server.ServletsAndJspServerFrame.stop(ServletsAndJspServerFrame.java:243)
at com.sap.engine.core.service630.container.ServiceStopper.run(ServiceStopper.java:31)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5#001143318A03003E0000000D000015CC000463E71A7BC7F1#1235744139781#com.sap.engine.services.deploy##com.sap.engine.services.deploy#######SAPEngine_System_Thread[impl:5]_73##0#0#Error##Plain###CACHE MAY BE NOT CLEARED, while stopping sap.com/crmmigrxcm application.#
#1.5#001143318A0300740000004B000015CC000463E71A8A8DA4#1235744140750#com.sap.engine.core.thread.impl5.ThreadManagerImpl##com.sap.engine.core.thread.impl5.ThreadManagerImpl#J2EE_GUEST#0#####Thread[Thread-715,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:5]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:5]_50]
Task: com.sap.engine.core.thread.impl5.ActionObject - Processing Task [classname: com.sap.engine.services.log_configurator.archive.ArchivingThread | toString: [email protected]106a69b] with classloader [[email protected]be66@service:log_configurator]#
#1.5#001143318A0300740000004C000015CC000463E71A8B2DF0#1235744140781#com.sap.engine.core.thread.impl5.ThreadManagerImpl##com.sap.engine.core.thread.impl5.ThreadManagerImpl#J2EE_GUEST#0#####Thread[Thread-715,5,main]##0#0#Error##Plain###Unexpected thread activity after interrupt() is executed in shutdown of SAPEngine_System_Thread[impl:5]_ThreadManager:
Thread[SAPEngine_System_Thread[impl:5]_69]
Task: com.sap.engine.core.thread.impl5.ActionObject - Processing Task [classname: com.sap.jms.client.connection.AsyncCloser | toString: com.sap.jms.client.connection.AsyncCloser@1a41c14] with classloader [[email protected]f854@common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
Maybe you are looking for
-
How to add a project to the deployment components under deployment server
Hi, When I run one of my projects in JSC, I got following error message: "application NeuronBank is already deployed on other targets. Please use create-application-ref command to create reference to the specified target; requested operation cannot b
-
*New Dates For* Upcoming Support Webinars & Info About Support
Dear Oracle Primavera Customers: As of November 2009, the Oracle Primavera software support team has completed the migration and integration to Oracle Global Customer Support. This is an exciting time for the support organization, as we will now util
-
How to xml file load in actionscript 3.0
Hi surfers, How to xml file load in actionscript 3.0, How to get xml data. Thanks in Advance. Pls give me ASAP, i'm struggle here.
-
Runtime error Object Required - Captivate 5
Hi, Wondering if anyone else has come across this problem and found any solution. I have created .swf using Captivate 5 and when I upload them to our learning environment (Learning Pool), the flash plays through to the end fine but clicking on next/m
-
Make a full backup of Database
Dear All Expert, I have completed installation and configuration then I want to backup full of Database to new OS without re-install new Database, is it possible? If can, please guide how to do it. Thanks and regards, Vandy Edited by: Vandy_Kh on Jan