Message scheduled (waiting )

Hi All,
I noticed message to BPM is waiting with 'Message Scheduled on outbound side' in SXMB_MONI. I read other messages on the same error, tried to delete all the queues with /nsxmq1,nsxmq2. and re-registered,activated all the queues in sxmb_admin, still the status is not changing.
It used to work, suddenly started waiting with message - Message is scheduled on outbound side.
We investigated this issue since yesterday night, any help is appreciated.
Thanks,

Scenario is DB-XI-Mail
I sent the sender (DB) QOS to EO, and when it is sending to BPM, it is keeping in XBQO* Queue, but if you look at SXMB_ADMIN, this queue is registered/activated for EOIO.
My question is why these messages are inputing to EOIO related to QUEUE? is there configuration that we could do to force to go to EO related to queue only.
I see some settings you could prioritize by size or interface, but did not help?
IF i see technical details, in SXMB_MONi, it shows it is set to EO, but all BPM outbound messages are going to XBQO* only.
Another thing, i noticed, If i click on this queue, there are no messages, these messages are showing with green flag/clock symbol and can't be deleted, and they processed wrong messages, so it is sitting and waiting, but even i correct the problem in BPM and reactivate the BPM, it is still wating because u can't restart them aslo ?
For initial development, I think if these messages are put in EO, then i would have not run into this problems.
Thanks,
raiv

Similar Messages

BPM Mapping error in SXI_MONITOR Message scheduled on outbound side.

When I try to process this message i get an error.
Message scheduled on outbound side.
I am using a BPM.
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Using EOIO in the send step Queue Name: cases
If I remove MI_TRANS2_BPM the message reaches the bpm, but with both transformation in the BPM the message gets an error in the queue where I get a green flag 'Message Scheduled on the outbound side"
This BPM was working on Friday but hasn't worked since. There have been no changes to the my development XI environment.
Some things that i have tried: Clearing the Queues (smq2), Redoing the entire scenario, clearing cpa cache.
Please help.
Thanks
Chirag

Hi,
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Any specific need to have the above design pattern....you can also try:
MI_Receive_BPM -> MI_TRANS_BPM -> MI_TARGET
You can use the message that you initially receive and apply all the necessary transformation on it and the map it to the target structure....
As you mentioned that if you remove MI_TRANS2_BPM your message is executed successfully...it means that the BPM transformation 2 is waiting for some event / Message....
If you need to go by the same design then you can follow the below steps to resolve the problem:
1) Check the return code of BPM in SXI_CACHE...it should be 0
2) Check for any errored instance of your BPM in SWWL (as mentioned in above posts)
3) Open the corresponding Queue and see for the messages stuck in the Queue....your Queue may be blocked....your BPM will be using a particular Queue and if any message is stuck in the Queue then all the messages that follow will get stuck in the Queue....
Now if it is only your BPM that is using this particular Queue then Delete the Queue (applicable to development environment....do not try in QA or Production environment)
4) In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed (possible only if the message has entered the BPM.
Regards,
Abhishek.

Experience Back Up issue, message reads "waiting for volume". Back up will not complete.

Experiencing "Back Up" issue. Regularly scheduled Back Up will not complete. Message reads "waiting for volume". What is that?

We need to know your Mac OSX version, from "About ths Mac" under your Apple menu.

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

BPM Mapping scheduled status in SXI_MONITOR Message scheduled on outbound

Hi All,
Please help me how can i solve following issue.
My Scenario WebService - PI - Proxy.
One of the message gets an error in the moni. where I get an green flag 'Message Scheduled on the outbound side".
The design was working fine earlier. It is giving problem now.
I tried following options:
1) I tested the mapping - it is working fine.
2) I checked Cache - the status is fine.
3) I checked Inbound queue(SMQ2) there are no messages stucked in the queues or saved in (smq3). Here i am using EOIO.
4) I checked SWWL - there are message with COMPLETED and STARTED but there are not ERROR messages.
Could any one please tell me - Can i DELETE - COMPLETED messages from SWWL? If i delete what is going to happen.
Please advice
Thanks
VR

Hi,
In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed
Also suggesting to check both the Queues....SMQ1 and SMQ2.....
delete an instance from SWWL only if it is in error state.....
regards,
Abhishek.

Sharepoint 2003 Message please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.

Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCP

how large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Each time I have a message ''please wait while windows configures iTunes''.

when i start my itunes each time i have a message ''please wait while windows configures iTunes''. i recently Upgrad to 9.0.2. i already uninstall and install.
pls help me.
thank you in advance .

when i start my itunes each time i have a message ''please wait while windows configures iTunes''.
The iTunes desktop shortcut is an "advertised shortcut". When you click it, the first thing it does is check the iTunes.msi and determines (against the installation database in there) whether or not there's any files and registry entries and whatnot for iTunes missing on your PC. If it finds something missing, it'll do a repair install of iTunes, which is the "configures" message you're seeing.
As to why it's always doing it in your case, and fixing it ... we'd better first work out if there's real damage to the iTunes stuff on the PC or if the shortcut/itunes.msi/registry machinery is just a bit confused.
Apart from the "configures" message you're getting every time you launch iTunes, is it working okay? Are you able to sync, play music, use the Store and so forth without any trouble? Or are you getting other problems as well?

In SXMB_MONI with(Green Flag) "Message Scheduled Outbound Side" (using BPM)

Hi All,
I had a Scenario where I am using BPM (to collect the Idocs received from Sender SAP R/3 system) and create a File as target structure. But one of the entry i found as (Green Flag) with status "Message Schedule Outbound Side". But the remaining messages are processed successfuly through the same BPM.
I even found that the when i double click on the PE of the "Green flag entry". its leading to "qRFC Monitor(Inbound Queue) with empty entries" instead it should lead me to the workflows Log screen. Since other successfully messages are leading to workflow log when i double click on the PE.
Please let me know your comments on this.
Thanks,
Shailaja

Hi Gouri,
I am getting gray flag in the column (Status - XML Message Status) and green flag in Colum (C- Outbound Status). So this Greem flag itself is creating the problem, because of this itself my messages is not getting processed and not delivered to target system.
I have even checked SXI_CACHE, when i click on the Integration Process-- Right click on my BPM and select the "Activation Log" .. here a message which i had
I Language not set. Using system default E
The container element MULTI_INVOIC02 is written, but not read or exported
The container element MULTI_INVOIC02 is written, but not read or exported
So the "MULTI_INVOIC02 " is used in the Container Operation & Multimapping of my BPM. I suspect that error as taken place in doing Corelation. Do you have any comments on this. If i get any error in Corelation .. how can i debug my BPM.
Thanks,
Shailaja

Send Commit to message stuck in "Message Scheduled" status

Hello,
I generated some messages using ABAP Proxy. However, the commit work never happened in the program that created the message. Now these messages are stuck in "Message Scheduled" status. How can I push the message forward. Can I trigger a commit? If so, how?
Regards
Cerish

Hi Cerish,
Are you getting this status in the XI ? If so, go to Queue Monitor and try to activate the same.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also check the SXMB_MONI of Application System(R/3) if you have a access about is proxy message is executed or not .
If the status is restart not possible, then you need to reprocess that.
Hope this helps,
regards,
moorthy

HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
PLAESE advise how to solve this problem.

Hi applerinneedforhelp,
Thanks for visiting Apple Support Communities.
If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
Jeremy

Message Scheduled But is not delivered

HI
I have one large message which is broken in to smaller packets and in r3 and sent to the XI system via abap proxy . My scanario uses a BPM where i have a loop which has a correlation . I collect one message send it and then again the loop collects and sends the next message.
My problem is in SXMB_MONI out of the eight small messages one message shows a green flag (Message scheduled on the outbound side ) . It is not scheduled but not delivered from the IEngine to The PE. Rest all the message are delivered properly.
How can debug such a scenario.
regards
Nilesh Taunk

Hi,
 In SXMB_MONI, did you get a message like this as seen below:-
"Message <MessageID> parked at the process <ProcessID> but not yet processed"
 Solution:
 Check your correlation defined. Use local correlation instaed of global correlation, i.e use the correlation in your block step. This should solve the problem.
Also see the SAP Notes below:
898131 : BPE-RUN: Messages lost when processes are incorrect.
894906 : BPE-RUN: Finding unprocessed messages.
Hope this resolves the issue.
Regards,
Dhana

BPM : Message scheduled on the outbound side

Hi
I have messages in SXMB_MONI that have been received into my BPE. They have a status flag ok (chequered flag ) but the Outbound Status is green (message scheduled on outbound side).
The BPE would have finished by now ...been in Message Scheduled on Outbound side for the entire day now.
What has happened ? I have no error - nothing !
(there are no entries in SMQ2, nothing in SXMB_MONI_BPE in error etc etc or Short Dumps)
Please help.

I posted an OSS note on this - so answer from SAP.
Solution is to delete the old entries via RSWWWIDE report (which could also delete work items that do not have a final status.) I ran this for everything not COMPLETED.
When I send another message in - it worked fine. So the fact I had a stalled WF a week ago was affecting any new one coming in.
Drilling down into the message in SXMB_MONI from the PE I could see an Exception Handling in the MergeandSendBlock - no error given - but it did have a time of a week earlier.. anyway then in the ST22 Dump I could see wf-batch with runtime error MESSAGE_TYPE_X_TEXT.
I feel this is very poor design on the BPM processing ! oh well.
See also
#Note 836092 - Archiving/deleting work items in the XI
PS Thanks to Sudhir earlier on... You nailed it - but at that stage I did not know what you mean so did not consider this - as I had no idea what affect running that transaction would do.

SXMB_MONI: Message scheduled on outbound side

Hi,
one message sticks in the integration server. The status is "Message scheduled on outbound side". Instead of the target flag there is a green flag in the column outbound status. The queue is registerd, following messages were processed succesfully. QRFC-Monitor is empty.
If I start outbound channel monitor, I can see one entry.
If i mark the outbound entry and click "display queue entry" the following message is shown (Transaction RFC):
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077 ...
What to do?

Hi Jayakrishnan Nair,
SM58 returns one entry:
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077...
So the status is still "transaction executing"...
Now I have checked WE02 in the target system and I have found the IDOC being successfully posted 2 hours ago!
It seems that you were right, that the acknowledgement was not received by XI.
I am going to delete that entry in SM58...
Hopefully this will not happen again in the future!
Thanks to all for your help! Points rewarded.
Regards,
Christian

SXMB_MONI - Message scheduled on outbound side (no queues)

Hi All,
I currently have a problem on one of our XI systems.
In SXMB_MONI all the process messages have the outbound status of "Message scheduled on outbound side" (green flag). The interface is going into a BPM process.
There is nothing in the QRFC-Monitor or in the tRFC - SM58.
I have already registered all the queues.
The XBQO queue for the BPM processing is not being triggered. This process used to work on this system, but has now stopped.
Any Ideas?
Thanks,
Matthew.

1. check in sxi_cache. the return code of ur IP shud be 0.
2. register q in smq2
3. anylogs seen from PE in moni?
or use from pg 46 for troublkeshooting from below link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -

XI messages status "Message scheduled on outbound side" with Green flag

Dear,
          On My XI system , i have too old messages and i want to clear those.
          In moni messages status is "Message scheduled on outbound side" with Green flag .
         When i am trying to cancel these messages i am getting a popup saying
          "Cannot cancel message because of it's status"
          And there is no queue entries for these messsage on smq1 or smq2 (perhaps deleted by someone)
          I just want to cancel these messages, please tell me if there is any way .
Thanks in Advance,
Sandeep

Dear Sunil,
                Thanks, these meesages are neither active nor used anywhere,
                Problem is somebody has manually deleted entries for these messages from SMQ1 and SMQ2.
Regards,
Sandeep

Message scheduled (waiting )

Similar Messages

Maybe you are looking for