Message to a Application

I have written a program in C, and now i should write the same for java.
The problem is, i can't find a type called WHND (windowshandler).
The second problem is, that i should convert the command sendmessage (Sends a Message to an other application).
Could anyone help me ???
Thanks, Kriki

Well this sounds like very low level MS Windows-dependant stuffs. No hope to find this in Java.
Write a DLL in C+ and call it from Java with JNI.

Similar Messages

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

Can't open web addresses from an email-get an ERROR message saying-no application could be found

Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

Crash report application what is that ? When shut down the computer this Message appeared The application crash repórter Dont Let shut down the computer

Crash report aplication what is that ? When shut the computer this Message appeared The application crash repórter Dont Let shut down the computer

Command-Option-Escape does the same as
Apple Menu > Force Quit...
It opens a floating box that lists current major Applications and their status (e.g., Not responding) and allows you to force quit any single Application or re-launch the Finder.

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

How to remove error message power pc applications no longer supported

How do you install photoshop 7.0 disk drive on a mac os x with the error message, "Power PC applications are no longer supported"?

Which version of mac os x are you trying to install photoshop 7 on?
If you really do mean photoshop 7 (cira 2002), then it won't work on any newer intel macs.
Photoshop 7 needs an PowerPC processor and your mac probably uses an intel processor.

HT1349 When trying to run itunes on my PC, get this message. This application has failed to start because MSVCR80.dll was not found.

When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?

Welcome to Apple Support Communities
A solution is listed in the thread below.
It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
https://discussions.apple.com/message/24610401#24610401

I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. I do not want t

I just bought a new iMac and used the Migration Assistant to transfer my files. Initially, all was working, but now a week later, I get the message that the application manager is missing, and I cannot get Photoshop and InDesign to launch. For my personal use, I did not a need to join Creative Cloud. Have you any suggestions for a work-around?

Try to install Adobe application Manager from below link and check
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager : Thank You

Why every time I try to open InDesign CC on Mac OS Maverick I get a "heap corruption detected free list canary is damaged" message and the application crashes?

Why every time I try to open InDesign CC on Mac OS Maverick I get a "heap corruption detected free list canary is damaged" message and the application crashes?
PL

I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

I get an error message: R6034 -An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. I just finished backing up my iphone on my hp laptop when I got this message.

When I finished backing up my iphone 5 to my hp pavilion laptop I got an error message R6034. Itunes shut down and I have not been able to reinstall it. The error message says an application has made an attempt to load the C runtime library incorrectly. My computer is more than 5 years old and I have never had this problem before. I tried unsuccessfully to reinstall itunes. Any ideas?
bdaumen

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

HT1349 iTunes will not start on my PC. I get a runtime error from the Visual C== runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

iTunes will not start on my PC. I get a runtime error from the Visual C++ runtime library when iTunesHelper.exe is started. The message states the application attempted to load the library incorrectly. How is the problem to be resolved?

Click here and follow the instructions.
(99035)

HT201210 I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460)

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

I can't open my itunes application, keep getting message - the itunes application could not be opened, an unexpected error occurred (13010) Please help

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

Message to a Application

Similar Messages

Maybe you are looking for