Message types for MAM

Hi,
Plz give msg types for the following:
Customer Master
Content Component
Content Component Hierarchy
Booking Unit
Pricing Condition records
Product Hierarchy
Open Orders
Regards,
Swap

Hi, Go to SE91 transaction and type V1 in message class and click on messages - display.
You will now see list of all messages for this application.
You can now select any of the message and then click on " Where used Icon " to know where all this message is used and double click on the program to see the ABAP code.
Reward if helpful.
Regards
Ravi

Similar Messages

  • Creation of  New Message Type for Extended IDoc

    Dear Friends,
    I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
    I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
    for Change Pointers.
    Warm Regards,
    Naveen Mutyapu.

    Hi naveen mutyapu,
    see these links
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
    happy learning.
    thanks
    karthik

  • Creation Output Message Type for Scheduling Aggrement

    Hi,
    Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
    Regards,
    Pankaj

    Hi,
    Output determination process for Scheduling aggrement.
    SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
    1)First create condition table based which becomes condition record for accessing the data.
    2)Create access sequence to access the data or search the based on the conditoin record in sequence  of the condition table.
    3)Define your message type like print,fax etc.
    Maintain the conditon record for the MN07 for the output type which new one you created.
    Regards
    Ravi Shankar.

  • What is the logical message type for Inbound Credit Memo (MM)

    Hi Folks,
    What is the logical message type for Inbound Credit Memo (MM)
    Plz explain.
    Thanks,
    Matt

    Hi Mat,
      The logical message types are as follows.
      /DSD/HH_CREDITDATA             DSD Credit Exposure and Credit lLmit
      CREADV                         Credit memo display
      CRESTA                         Copy credit status (DebtorCreditAccount)
      SBINV                          Credit memo procedure with invoice creation
      SBWAP                          SD Credit Memo Procedure with Automatic Postin
    You can search for message types in database table EDMSG.
    Regards,
    Vimal.

  • Equivalent Idoc message type for EDIFACT BANSTA

    Hi Experts,
    I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
    If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
    Thanks in advance.
    Regards,
    Ravi

    Thanks raja shekar. I posted this thread in ABAP development forum.

  • MB1B transfer posting Idoc/Message type for outbound and inbound

    Hello All
    Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
    Thanks
    Ricky

    Its WMMBXY

  • Idoc Message type for Customer Change XD02

    Hi All
    As per the business requirement, we need to have inbound interface to ECC system, in which we will add more partner's to the existing customers.
    I tried posting Idoc thorugh WE19 using message type DEBMAS and basic type DEBMAS06. It is creating the new partner which is part of the idoc but it behaves like a refresh, i mean the already existing partners are getting deleted.
    Tried to find the relevant message type for XD02 but did not find other than DEBMAS.
    Can anyone let me know how to acheive this.
    Following are the segments am passing.
    E1KNA1M :
    MSGFN     4
    KUNNR     1234
    ANRED     /
    BBBNR     0
    BBSNR     0
    BUBKZ     0
    KTOKD     /
    LAND1     /
    NAME1     /
    ORT01     /
    ORT02     /
    PSTLZ     /
    REGIO     /
    SORTL     /
    SPRAS     /
    STRAS     /
    TELF1     /
    LZONE     /
    UMJAH     0
    JMZAH     0
    JMJAH     0
    UMSA1     0
    HZUOR     0
    CIVVE     X
    SPRAS_ISO     EN
    E1KNVVM :
    MSGFN     4
    VKORG     1
    VTWEG     1
    SPART     1
    KALKS     1
    AWAHR     100
    ANTLF     9
    KZAZU     X
    LPRIO     1
    VSBED     1
    WAERS     USD
    VWERK     ABCD
    UEBTO     0
    UNTTO     0
    PODTG     0
    E1KNVPM :
    MSGFN     4
    PARVW     RE
    KUNN2     1010
    PARZA     0
    After execution, i am getting IDOC status 53 with message "Changes have been made".
    Thanks & Regards
    Madhu K

    Hi Madhu,
    /thread/2051526 [original link is broken]
    Same post in abap general.
    Regards,
    Madhu.
    Edited by: madhurao123 on Oct 4, 2011 11:59 AM

  • IDoc Message Type for VL09

    Hi,
          Is there an IDoc message type for VL09 (Reverse Goods Issue) for Delivery. Do let me know please.
          We are using an ECC 6.0 system (WebAS 700)
    Regards,
    Aditya

    Hi,
    You can use this message type MBGMCA, IDoc type MBGMCA01 and process code BAPI.
    This process code will call FM IDOC_INPUT_MBGMCA to  reverse good movements with MB_CANCEL_GOODS_MOVEMENT.
    Regards,
    Ferry Lianto

  • Message type for idoc PROJECT01

    Hi ..
         How to send a PROJECT01 idoc from one r/3 to another or third party system.What is the message type for the idoc and what are the configurations required.
    Tharun

    Hi Tharun,
    The Message Type for the basic type PROJECT01 is PROJECT.
    Using this basic type u can send only project and wbs related Information using BAPI.
    For Configuration the steps are as mentioned below.
    1.Define Logical Systems in sender and receiver.(SALE)
    2.Assign Client to Logical system in the respective systems.(SALE)
    3.Create RFC Destination.(SM59)
    4.Create a distribution model .(BD64)
    5.Click on Add Bapi, specify your sender, receiver the Object name as <b>ProjectDefinition</b> and the select the Method of your interest.
    6.Generate Partner Profiles in the Sender System.
    7.Distribute the Model to the receiver.
    8.Generate Partner Profiles in the Receiver System.
    Hope this helps you..
    Let me know incase u have any questions.
    Thanks & Regards,
    Vanita

  • Need help for new message type for PO archiving

    Hello All
      I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
    Steps for new Message Type for PO Archiving
    1.     Defined new Table 513 Purch.Org./Plant.
    2.     Defined new access sequence Z513 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 21
    Table = 513
    Description = Purch.Org./Plant
    Requirement = 101
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZARR for PO
    General Data
    Access Sequence = Z513
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Program = FM06AEND
    FORM Routine = CHANGE_FLAG
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = Print Out
    Storage System
    Storage Mode = Archive Only
    Document Type = ARCHIVE
    Mail Title and texts
    Language = EN
    Title = Archiving for Legal Requirement
    Processing Routines
    Transmission Medium = 1 (Print Out)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = ZJ_9H_MEDRUCK
    Partner Roles
    Medium = Print Out
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 1
    CType = ZARR
    Name = Testing for Archivin
    Short Text = New
    Update Print Related Data = Yes (checked)
    Oprat. = 2
    CType = ZARR
    Name = Testing for Archivin
    Short Text = Change
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1
    Step = 100
    Cntr = 1
    CTyp = ZARR
    Description = Testing for Archivin
    Requirement = 101
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZARR
    Med = 1 (Printout)
    Funct = VN
    Name = Testing for Archivin
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Plant = 24
    Partner Funct = VN
    Medium = 1 (Printout)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = HUL1
    Storage Mode = Archiving only
    Thanks
    Ankit

    the problem is the Exclusive = Yes  indicator in the access sequence.
    Your other message has this exclusive indicator as well.
    so if the first  message is found, then no other message wil be determined
    to allow several messages in one PO, you must not set this exlusive indicator

  • Multiple message types for an idoc type

    Hi all,
    I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
    if it is so pls tell me how to assign these two message types for my idoc .
    i want to create multiple message types because i want to send same idoc type to diff legacy systems.
    My requirement is message type one is only for first three segments and message type two is for another three segments .
    The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
    how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?

    Hi Kunal,
    Below are my thoughts from a design perspective,
    My requirement is message type one is only for first three segments and message type two is for another three segments .
    The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
    Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
    Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
    For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
    but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
    OR
    Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
    Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
    how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
    The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
    You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
    I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
    Regards,
    Chen

  • Define fault message type for RFC

    Hi,
    How can I define the fault message type for RFC so that when I import RFC from another server to XI, I can view this Fault type.
    So far I could only see Request and Response type .
    Thanks

    Hi Rokie,
    Acc. to me by default we are having only request and response mesages for RFC and in case some exception/fault is there the RFC will through this in the response under the Return parameter having msg,id number as sub fields which you can map to fault message type.
    Sachin

  • Message Type for Material Master Data Changes

    Hi all
    I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
    Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
    I would like to replace this message type with another one (RS0020) in order to align different systems.
    Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
    So I would like to know:
    1. How is the message type related to the DataSource 0material?
    2. is it possible to replace a message type for BW?
    3. if yes, how can I do it?
    Thanks in advance.
    Elisa
    mail: [email protected]

    Hi Oscar!
    At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
    But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
    E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
    I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
    As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
    That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
    But message types referred to MARA field changes are different between the two systems.
    And it seems they are automatically created.
    Is it true?
    Thanks
    Elisa

  • PDR/Repl.Workbench, Handle 2 Message Types for Materials

    Hi there, here in an existing landscape material data gets distributed to a couple of systems with the PDR tool. A custom message type ZMATMAS2 is being used and in UPSC01 the object type MAT is mapped to that ZMATMAS2. Now, I need to connect a new system with PDR and I would like to a new message type, say ZMATMAS_NEW. (to be independen from existing extensions, segment reductions etc.)
    What would be the best way to handle different message types for different systems in PDR / UPS?
    I thought of creating a new object type in UPSC01, e.g. ZZMAT and mapping it to my ZMATMAS_NEW. But I wouldn't know how to enhance what in the consequence of that, so that PDR / UPS works with two object types for materials.
    Any idea?
    Regards,
    Karsten

    Hello Karsten.
    that is no problem - that is what the solution was designed for.
    You have to define different UPS package types and register them recipient dependant.
    kind regards
    Marcus Wagler

  • Best JMS Message Type for XML

              Which type of message is most suitable for XML file transfer? and why?
              what parameters decide the selection of message type for xml payload?
              

    "dyn" <[email protected]> wrote in message
              news:[email protected]..
              >
              > Which type of message is most suitable for XML file transfer? and why?
              > what parameters decide the selection of message type for xml payload?
              You can use WebLogic's XML message type if you like. If you want to use
              selector expressions then it is particularly useful, especially since your
              selector expressions can run on the body of the message. However, the
              implications of this are that the selectors are more expensive (both in
              terms of the processing needed to evaluate the XPath expression, and in
              terms of the fact that the message bodies have to be in memory to do the
              evaluation).
              If you just want to transfer XML, then why not use a simple text message
              type.
              Use whatever suits your needs.
              Regards,
              Jon
              

Maybe you are looking for