Messages Beta doesn't work behind corp firewall

Any suggestion on this using like port 80 or 8080 to send messages to iPhone and iPad? Thanks!!!

No, you can't change the ports used by Messages. All you can do is open the port required by Messages in the firewall.
Using iChat with a firewall or NAT router

Similar Messages

SB-Messaging adapter doesn't work behind firewall

Using BizTalk 2013 and the SB-Messaging adapter to retrieve and send messages from Microsoft Azure Service Bus Queue's and Topics.
The Internet proxy and firewall are blocking all the outgoing TCP Ports but the HTTP (80) and HTTPS (443) port are open.
The SB-Messaging receive location is configured correct but the messages are not being received. There is nog error message in de event log.
The SB-Messaging send port is configuerd correct, but the messages are not being send. This is the error message:
A message sent to adapter "SB-Messaging" on send port "SP_Queue_SB-Messaging" with URI "sb://myesb-o.servicebus.windows.net/testmessagequeue/" is suspended.
Error details: System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://myesb-o.servicebus.windows.net:9354/. The connection attempt lasted for a time span of 00:00:20.9927053. TCP error code 10060: A connection attempt failed
because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 65.52.128.246:9354. ---> System.Net.Sockets.SocketException: A connection attempt failed because
the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
Why does the SB-Messaging adapter not work over the HTTP(S) connection? Why does it not fall back to the HTTP protocal?

Have you installed Windows Azure SDK v2.2 from the SDK site
here ?
If not try installing it and restart the host instance.
Reference can be taken from
blog post
If above does not resolve your issue,I would also suggest to open ports from range 9350 to 9354 .
Also go through below links to get more understanding.
ConnectivityMode
ConnectivitySettings.Mode
Thanks
Abhishek

After I change iPhone 5 to 6 , my message app doesn't work properly.

After I change iPhone 5 to 6 , my message app doesn't work.
1. messages history may suddenly disappear ,after i restart phone , it comes back.
2. sent text from contacts, wont see message history or crash. after send message, all history will come back.
3. open message app always very slow.
I nv delete my message since 2010. So there is alot of messages ( estimate 40K messages) in my phone. however, when i was using iphone 5, it works fine.

After I change iPhone 5 to 6 , my message app doesn't work.
1. messages history may suddenly disappear ,after i restart phone , it comes back.
2. sent text from contacts, wont see message history or crash. after send message, all history will come back.
3. open message app always very slow.
I nv delete my message since 2010. So there is alot of messages ( estimate 40K messages) in my phone. however, when i was using iphone 5, it works fine.

RPC-XML and JMXBeans works behind a firewall?

Hi,
i�m studing Java and have a question, RPC-XML and JMXBeans is possible to run this tecnologies in Internet??
for example, if i have a J2EE server or a RPC-XML server and it is public for Internet, somebody can access to my services from his officce or house?
JMXBeans i think that have some types of communications, as rmi, jndi or ldap but i dont know thar it works fine behind a firewall
Sorry for my poor English, i�m studing it too

Behrang Saeedzadeh <[email protected]> writes:
If you are going through a firewall then you are best off using http
tunneling for you client communication assuming the performance is
acceptable. If you do this then you should have no problems. For an
authenticating firewall with tunneled t3 you may need to provide
credentials to get through. If you are using wlclient.jar then you may
need to raise a support call since we don't currently support proxy
auth with tunneling.
andy
Hi all
I'm developing a Swing application that connects to an application server and uses EJBs for communicating with the server.
My application works fine, now that it's not behind a firewall. Can my application also connect to the server when the client is behind a firewall? What if the client is behind a firewall that requires authentication?
If the answer to the above questions is no, could someone please tell me what do I have to do in order to guarantee that my application also works behind a firewall (or an authenticating firewall.)
Best Wishes,
Behrang S.--

JMXBeans and RPC-XML works behind a firewall???

Hi,
i�m studing Java and have a question, RPC-XML and JMXBeans is possible to run this tecnologies in Internet??
for example, if i have a J2EE server or a RPC-XML server and it is public for Internet, somebody can access to my services from his officce or house?
JMXBeans i think that have some types of communications, as rmi, jndi or ldap but i dont know thar it works fine behind a firewall
Sorry for my poor English, i�m studing it too

Behrang Saeedzadeh <[email protected]> writes:
If you are going through a firewall then you are best off using http
tunneling for you client communication assuming the performance is
acceptable. If you do this then you should have no problems. For an
authenticating firewall with tunneled t3 you may need to provide
credentials to get through. If you are using wlclient.jar then you may
need to raise a support call since we don't currently support proxy
auth with tunneling.
andy
Hi all
I'm developing a Swing application that connects to an application server and uses EJBs for communicating with the server.
My application works fine, now that it's not behind a firewall. Can my application also connect to the server when the client is behind a firewall? What if the client is behind a firewall that requires authentication?
If the answer to the above questions is no, could someone please tell me what do I have to do in order to guarantee that my application also works behind a firewall (or an authenticating firewall.)
Best Wishes,
Behrang S.--

TS4196 my messages beta suddenly stopped working

my messages beta suddenly stopped working and won't restart after i repaired disk permissions on my iMac.
what can i do?

I dont know but I cant open..it crashes immediately every time even after re downloading..hope someone has answer ..not looking good for Mountain Lion continuing it eh?

IMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

iMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

Hi carre13,
Welcome to the Support Communities!
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Messages beta won`t login behind proxy

Hi There,
I`m using the Messages beta app behind a university proxy which accepts basically any protocol (HTTPS/HTTP/SOCKS5...) but requires authentication.
The problem I`m having is that any account (gmail, AIM etc) except iMessage works with a proxifier app eg. Proxifier or ProxyCap.
What I`m guessing is that iMessage uses a different protocol, but which one? If this is the case I could look for a Proxifier app that accepts the specific protocol.
Any guesses?

Hi,
I would use the iChat feedback page
I have heard of Google (possible Jabber account in General) not having a Proxy option in Messages beta
The AIM ones do but mostly points at using the System Preferences set ones.
In Previous versions the System Preferences ones tended to be the better option.
10:37 PM Wednesday; May 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

New message button doesn't work

Hi,
I have rebuild my friends drive with Disk Warrior and now, the Mail software doesn't work well. I cannot create a new message. I tried the "new" button, the "new message" menu in the "File" menu. I even tried to create a new mail by using a link on a web site via Safari. I erased the com.apple.mail preference and the Mail folder in my library. I tried with a new account. Nothing works. The system is a G5 with Tiger 10.4.8.
I think the problem is the framework.
Does anyone have an idea to fix this? Can I reinstall over it? How? With the original disk (10.4.6)?
Thanx in advance!

Hi BlaKCroW.
What does “I tried with a new account” mean? Are you talking about a user account or about a mail account, i.e. have you checked whether the problem is system-wide? Try this:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues.
In the meanwhile, take a look at the following article, in case this is a font issue:
Font Management in Mac OS X Tiger and Panther

WMP Plugin Won't Work Behind University Firewall

Hey people, I'm working behind a university firewall that blocks everything except http and https at the moment. I can't get any of my streaming audio to work when it loads in the Windows Media Player plugin, but streams work fine when I'm using Quicktime or Flash plugins.
My question is, is there a way to choose Quicktime as the default plugin? I mean, I know most of my streams will work on either WMP or QT, but most go straight to WMP. WMP streams work fine on other people's windows machines, which just annoys me more. Any suggestions?

Hello Stephen:
Many (including me) use a free download called "Flip4Mac." That plug in permits WMP files to be played in Quicktime. In fact, Microsoft has dropped support for WMP on Macs and, as I recall, actually provided a link to Flip4Mac.
Barry

Nokia Maps online doesn't work behind corporate fi...

Hi,
Nokia Maps online 'search' and 'routes' don't work on my work computer. My PC is behind corporate firewall and proxy, but that shouldn't be a problem.
On my work's PC, I can save, edit and rename Favourites; I can rename Routes; I can see a route previously saved on my phone. But it's not possible at all to search for places and consequently it's not possible to calculate new routes.
I think Nokia should pay attention to this proxy issue, if it wants Nokia Maps to become popular all over the world, since at least on my corporation, Nokia Maps is the only mapping system that cannot be used!
Google Maps, NAVTEQ.com and TomTom route planner are some mapping systems that work fine on my work PC. Unfortunately, I cannot use Nokia Maps, which is my favourite system...
Can a Nokia representive forward this to the Nokia Maps online team?
Regards.

I'm experiencing this same issue. Please fix it. Now I have to use google maps.

Call shortcut at top of the message body doesn't work.

I get an iPhone 4S and don't know why, the shortcut doesn't work.
I've tried to change the writing of the numbers at contacts but it still doesn't work.
Has someone had this problem?
tks

NOBODY!?
Ok my english is not the best, is it difficult to understand? Or nobody has this problem?

"Home Directory Full" message "fix doesn't work for me

Often (no, not always, it's not consistent), I get the dreaded "Home Directory full" message when I launch mail. Mail then quits when I click OK. Normally, if I launch it again right away, it works.
I tried to use the standard fix (e.g., removing the "Envelope Index" file to the desktop and launching Mail). This did cause a dialog to pup up informing me that I needed to re-index my mail file. I did that, and the process stopped with the progress indicator about two thirds through. I quit Mail and replaced the Mail folder in Library with the backup I had made before getting started.
Next, I tried the Hoover method (running the vacuum command from the Terminal. My machine grinded away for some time. I don't know how far it got (there is no progress indicator nor any other feedback of any kind), but since nothing happened for a good half hour (with no more disk activity for a long time), I quit that process, too. Get info revealed that the "Envelope Index" file had not been modified at all by this. Again, just to be on the safe side, I replaced the Mail file again with the backup copy.
Because the re-indexing in my first attempt had stopped while processing my sent items folder, I suspected that this one was the culprit. I therefore attempted to rebuild it (via the menu command in Mail). Much to my surprise, the process actually finished without an error message. However, my sent items folder now contained some 5,200 emails as opposed to the 7,00 or so it should have.
Then I saved my Mail preferences file to the desktop, made a backup copy of my Mail backup file, and launched Mail. This made the application believe that it was being launched for the first time. I used the Import command and imported only the contents of the Sent Items mailbox, specifying "Other" as the type. This imported 5,225 items; at that point, the progress indicator was showed a fully completed process, even though the "messages" folder contained 7,900 items. Checking things, I found that there was a discrepancy of 9 items (i.e., the last item that showed as having been imported was not the 5,225th item in the "messages" folder, but rather the 5,216th). I thus moved the first 5,216 items from the messages folder into a different folder and tried to import the rest. Much to my surprise, Mail imported the same 5,216 items all over again. This is when I noticed that it does not import from the "messages" folder but rather from the file called "mbox".
And this is where things stand. I still get the "Home Directory Full" message about once out of two launches of Mail (but never once Mail is up and running). I desperately need to get this fixed as I fear I'm on the brink of a disaster with my mail file.
One more clue: I cannot be 100% sure, but it seems to me that the problem began when I added a second dot mac email account to my Mail setup (we have a family pack; I always managed the main account and have more recently added one of the sub-accounts to my configuration). I also noticed that sometimes, this second dot Mac account shows up in my list of mailboxes on the left side of the screen, and sometimes it doesn't. Both these accounts are configured to be checked automatically. In addition to these IMAP accounts, I have a half dozen POP3 accounts and some 40 or 50 local mailboxes configured.
Does anyone know of a utility I can use to rebuild my entire email file instead of just the index? Or does anyone have any suggestions as to how I can manually fix things? I did do the usual stuff already (using disk utility to check the disk, fixing permissions, and so on) without detecting any problems.
Thanks in advance for any assistance you can offer.
Daniel

You’re welcome.
When I removed the preference file (com.apple.mail.plist), I also removed
the folder "Mail" so as to start from scratch completely.
Well, that’s not what you said in your first post...
I only use "Other" because I read in one of Apple's notes that one should
try "Other" in the event that the OS X Mail import failed (which it did).
This is wrong in the case of Mail 2.x. That has to be an old article. Could you please be more specific as to where exactly did you find it?
there is a way to actually export the contents of a mailbox as individual
items that can then be reimported.
Selected messages can be exported in standard mbox format by doing File > Save As in Mail and choosing Raw Message Source from the Format popup menu. Standard mbox files can be imported into most mail clients. In particular, they can be imported back into Mail doing File > Import Mailboxes and choosing Other as the data format. Using this format, however, would cause some status flags to be lost (e.g. whether a message has been replied to).
Locally stored mailboxes can be copied to the Desktop or anywhere else by just dragging them there from Mail itself (for server-stored IMAP mailboxes, copy the messages to locally stored “On My Mac” mailboxes in Mail first). These, however, are .mbox folders (not standard mbox files), where messages are stored in individual .emlx files that other mail clients don’t know or care about. They can be imported back into Mail doing File > Import Mailboxes and choosing Mail for Mac OS X as the data format.
It also explains why the import only brought in 5,200 items instead of the 7,900.
The question is: where are the others?
In the Messages folder.
as I mentioned above, I used disk utility to check the disk and fix permissions, so I did
not just do the permissions stuff. In my experience, if checking the disk gives you an
OK result, then there is no point in booting from another disk to perform a repair disk.
Right. I missed that part of your first post. Sorry.
if the mbox files are no longer needed, can they be removed?
Yes. The only items within a mailbox (i.e. within an .mbox or an .imapmbox folder) used by Mail 2.x are Info.plist and the Messages folder. Any other files you may see there are almost certainly Mail 1.x files that Mail 2.x leaves there after the conversion. This is poorly explained in Mac OS X 10.4 Mail: Some mailbox files used by Mac OS X 10.3 are not deleted after importing. The article only talks about mailboxes in ~/Library/Mail/Mailboxes/, but the same can also be said about mailboxes in “POP-”, “IMAP-”, or “Mac-” account folders.
As long as you keep a backup copy of the old files for a while (at least, until you’re sure everything was converted properly), they can safely be removed from the Mail folder. OnyX has a Cleaning > Misc > Temporary and obsolete items option for getting rid of all those files.
Note that if you see strangely-named Messages-T0x... folders, these aren’t old files from previous versions of Mail, but rather an indication that there is something amiss. More specifically, these are temporary folders created by Mail 2.x during an import or a reindexing process (e.g. rebuilding a mailbox) that Mail should have deleted when done. Their presence is a clear indication that something didn’t work as expected.
<hr>
Here’s the procedure I usually suggest to set up Mail again from scratch:
1. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
2. Quit Mail if it’s running.
3. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
4. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
5. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
6. You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
7. If Mail works fine now and you had any messages stored in local mailboxes, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders, if any.
8. If .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
As a result of doing the above, some messages may be duplicated. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

The "Show To/Cc label in message list" doesn't work

Hi all,
I use Apple Mail 5.2, and i have created some mailboxes which i use to archive the emails i sent and receive. I have noticed that when i move emails i have sent to these mailboxes, in the message list i only see the Sender (who is me of course) and not the recipient (in the default Sent folder everything works OK). You realize that this creates a huge problem because if i want to find an email i sent to someone, i have to click each email and see the recipient from the preview column.
I thought that it was the setting "Show To/Cc label in message list" but even with this marked, it still doesn;t show anything... The only thing that is changed is that in some emails it shows a little greyed "TO" but next to that, there is only the email Subject, and not the recipient (as expected).
Is this a bug?
Of course this problem doesn't exist in Classic layout because there you have all availiable columns, but i really like the default view and i want to keep that..

#{userlist.userList()
#{ul.edituser}Spot the difference there. I do believe "ul" should be "userlist"; in other words it will link to an action method "edituser()" in a JSF managed bean which I assume will be named Userlist. Its really simple when you run into the problem of an action method not working: 99/100 times the action method EL declaration is wrong. Now it could be typo, but I've been known to forget the #{} part too...
I use the JBoss Tools Eclipse plugin myself; it has nice JSF additions that add EL validation and autocompletion to the editor. That way I know already from the code view when I've made a mistake in stead of "at runtime". A missing action method turns up as a warning in the jsf editor for example. That is of course only helpful when you're actually using Eclipse ;)

Messages Beta doesn't work behind corp firewall

Similar Messages

Maybe you are looking for