Messages from PI are successful , but not shown in AIF error handling and monditoring

Dear All,
We have messages being triggered from PI to proxy and to AIF.
Messages status is shown as successful in sxmb_moni transaction but I don't get to see these in /AIF/err - error handling and monitoring transaction.
WHat could be the possible reason? would there be any missing authorization.
Note: this is working in Development but having this issue in test environment.
Thanks and Regards,
Archana

Hi Archana,
About ERR_WEB, probably run an old version, but this won't help you either, I think.
Another tip is to look in PI:
Is your service synchronous? For synchronous messages PI only persists the message in PI's message store if the abap proxy returns an error, such as a SOAP Fault. If your abap proxy is not returning an error, then make sure it does. You can raise an application error in AIF.
If PI already receives a SOAP fault, then I suggest you to check if the message was stored in PI: see SAP note 872388 to guide you on this task.

Similar Messages

  • I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens.  It says just the improvements from 8 are available but not the whole ios.  What to do?

    I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens.  It says ios8.0.2  improvements from 8.0.1 are available but not the whole ios.  What to do?

    It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.

  • Oracle stored procedure call failed,but not captured by the error handling

    Hi All,
    I have a unix shelll script which calls a stored proc in Oracle, the stored proc call failed due to "ORA-01033: ORACLE initialization or shutdown in progress".
    But it is not captured in the error handling block, Any ideas why this had happened?
    SQL file had : my_test_sql.sql
    exec my_proc(..............);
    Unix shell script has this call:
    sqlplus -s my_user/my_pwd@db1 @my_test_sql.sql
    if [[ $? -ne 0 ]]; then
    echo "failed"
    exit 1
    else
    echo "success"
    fi
    If i execute the above shell, I'm getting the following
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    SP2-0306: Invalid option.
    Usage: CONNÝECT¨ Ýlogon¨ ÝAS SYSDBA¨
    where <logon> ::= <username>Ý/<password>¨Ý@<connect_identifier>¨ | /
    success.
    This puzzled me, any pointers?

    The $? status variable shows the return code of the last command executed. It will be difficult to determine what the exit status of your sql script is without knowing the script. Do you have any "WHENEVER SQLERROR EXIT" statements in the script?
    The ORA-01033 error happens when the database is not open, perhaps in recovery, or startup or shutdown is halted due to a failed or full disk, error in archiving or writing to redo, etc.

  • HT1926 i have installed quick time ok but not itunes get an error code and tried downloading manually from tools but still no good. also get verify i have sufficient priviledges on apple mobile support and application ?????

    Hi all. I have tried installing itunes and quick time many times and have finally got quicktime but no itunes . I have followed apple support  and disabled anti virus and everything etc and also tried installing itunes manually from tools but still get error code. also when getting to apple mobile support and starter etc i get verify that i have sufficient priviledges ? Anyone know what the heck all this is about guys ?????

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

  • Leica M9 and Aperture3 not showing camera aperture setting when import DNG files.  Shutter speed and ISO are indicated, but not aperture.  When I export and open in Adobe Camera Raw aperture setting is displayed.

    Does any one have a suggestion as to how to get A3 to show the camera aperture setting on Leica M9 DNG files?

    You will want to read this thread in its entirety.
    The short story (as I understand it) is that the M9 body receives no information about aperture from attached lenses.  It is able to derive an estimate of the aperture, though, and it lists this derived number in the metadata field "Approximate F-stop" (not the exact field name).  Aperture (the program) does not report the contents of this proprietary field.

  • System message 38 from work area ssfcomposer does not exist in va03

    Hi,
    I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
    system message 038 from work area ssfcomposer does not exist.
    i have long item line in this sale order what can i do please help me.
    Regards
    KK

    If I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
    I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
    To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
    I guess, the above answer will help you to close the thread.
    Regards,
    SaiRam

  • Sytem message 047 from work area SSFCOMPOSER does not exist

    Hi Friends,
    When I am trying to see the print preview of a PO I am getting this error msg
    "Sytem message 047 from work area SSFCOMPOSER does not exist".
    I had checked the forum and the System message was 046, but the error is not solved.
    Regards,
    Anu.

    Wrong forum to post the issue.
    VJ

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    I did a backup from my 3G and want to get the backup now on my iPhone 4, but the backup from the old 3G is not shown as an option to configurate. How do I get the information on my new phone?

    First, back up your old iphone manually:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your old phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
    About backups and what's saved: http://support.apple.com/kb/HT1766
    How to back up and restore: http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    After that, connect your new phone and let iTunes set it up. iTunes will detect the old 3G backup and ask you, if you want to use it to restore the info on your new iphone. If you agree, all settings and data will be present after the process is finished.
    This is also explained in this article: http://support.apple.com/kb/HT4137

  • Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"

    Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"
    The error message reads: We could not complete your request, please contact Itunes support to complete this option.

    You are almost there:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I want to buy poker chips from my iTunes account, but not do this when i want to buy that say"please contact iTunes support ti complete this transaction"for what is this i dunt understand this.plz solv this probleams.

    Hi,i'm Mizanur Rahman,i want to buy poker chips from my iTunes account, but not do this when i want to buy that say "please contact iTunes support ti complete this transaction" for what is this i dunt understand this.plz solv this probleams.but i parseas software from this account.so why not parseas poker chips? i have lote of blance in my account.so plz plz solve this provleams.
    <Personal Information Edited by Host>

    These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums (I've asked the hosts to remove your email address from your post).
    You can contact iTunes support here and ask why you are getting the message and how to resolve it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?

    When I download a document, I get a message saying download was successful, but a blank screen where the document should be. What am I doing wrong?
    I go to an internet company and try to download a document from it. A tab pops up saying the download was successful, but all I see is a blank screen with UI at the top. I don't understand where the download is going.

    Thanks so much for your reply fanboy20. 
    Yes, just made sure of that.  I do have the latest version of Flash player.  But I have just staggered upon the answer.  Chalk it up to being a newbi.  I was not putting my apple tv to sleep and it would not allow me to see
    you tube on my computer while it was still operating on my TV.  When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine.   Thanks again for your response.

  • Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank.  Suggestions? Thanks.

    Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank".  Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

    Not all YouTube videos are available for downloading, but:
    There is the Free  iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
    http://itube-grabber.en.softonic.com/mac
    Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
    and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
    http://www.real.com/realplayer/mac
    which also downloads videos from YouTube.
    There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
    http://www.macupdate.com/info.php/id/27604/itubex
    Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
    http://perian.org/#watch
    It's the video at the bottom of the page.

  • Import is not available all other actions are active but not import help?

    Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    *You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    *To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

  • Loops are installed, but not in Loop Browser

    Hi All!!
    I have just bought the four (newly packaged) GarageBand Jam Packs. I was so impressed with the demo "song" Victory (Full), that I have decided to use those loops for a project I am working on.
    The "Victory" loops all play in the loop browser (all 137 of them) when I have "Victory (Full)" loaded for playback in GarageBand.
    But.......
    When I start a new project, the Victory loops are not available in the loop browser. This is rather perplexing for me.
    What do I need? I need to find a solution to see these loops and maybe others that are missing (but not missing).
    Thanks in advance for your help.
    Rodger GW

    Yes. The demo song is in D, and I have ensured that I have set the new song to be in D.
    I have also trashed the preferences, trashed the indexes, rebuilt the loop browser by dragging the loop folders from all sources (sources being those defined by the install script), and ensured that the Keyword Browsing is unckecked and I have reset the keyword layout.
    The only thing I have not done is the laborious task of importing each of the 137 Victory files into the the track window then translating each individual part as an Apple Loop. The reason for this is two fold: 1. I am on the lazy side of life and think there should be a quicker way; and 2. I have checked the other files contained in Library -> Audio -> Apple Loops -> Apple -> Jam Pack 4 - Symphony Orchestra are available in the loop browser under the Jam Pack 4 and the Loops Pull Down Menu.
    I am very unsure of the next thing to try.
    Rodger GW
    PS I have even tried to have those loops from the "Victory (Full)" file be selected as favorites. They now reside in Home -> Library -> Audio -> Apple Loops -> User Loops -> SingleFiles, but do not appear in the Favorites tab in the Loop Browser in any new project.
    Thanks in Advance,
    RGW

Maybe you are looking for