Messages won't send files via AIM anymore

I've been using Messages via AIM and iMessage and had no problems sending files or images for years until recently. Now AIM won't send files. There's no error message and I can see the image in the conversation window but the recipient doesn't get the file/image. Also when they try to send to me, I don't get the file/image either. This problem has started just this week.
We have had our broadband upgraded and a new router installed but it's in Modem mode and hooked up to our Airport Time Capsule that runs the wifi.
I've read some posts about port changes, but not sure if this would be the case.
Any help much appreciated.
Martin

Hi,
See also AIM Screen Names using @Mac.com or @me.com IDs to end (it is in Mountain Lion's area)
The @mac.com and @me.com name should still work as AIM valid Screen Names.
It is only in iChat up to and including the base version of iChat 6 in Lion.
The Later updated version of iChat 6 should work.
It is because during Lion Apple introduced the double Login to AIM and Apple that allows the app to confirm you can login in with the Apple ID.
Basically unless the app has logged in to Apple with the ID then the AIM server cannot see it.
To certain extent this already was the case in AIM and iChat for @me.com ID once there was no MobileMe server.
All @me.com names that became linked to iCloud IDs get around that by being iCloud IDs.
So... Later versions of iChat 6, Messages 7 in Mountain Lion, Messages 8 in Mavericks and the version in Yosemite (also called version 8) all allow Logins with Apple Issued IDs to the AIM servers.
It does help that you may have "updated" the account yourself along the way - such as Linking an @mac.com to MobileMe when MobileMe came out and again for iCloud.
This may mean that actually you have an Apple ID that has @[email protected] and @icloud.com emails and all those "IDs" works as login names with the same password.
7:28 pm Friday; April 10, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

My IPad 3G camera won't send pictures via email anymore?

I used to be able to email photos and now I can't.

No, they're all stuck in my outbox. When I go to the outbox, there is a message that pops up after awhile: Cannot Send Mail. The user name or password for "SMTP:[email protected]" is incorrect.
I'm not sure why it's adding the smtp-- I didn't have that in the email address.
Apparently, I'm supposed to log in somewhere, but not sure where/how to do that???

Sending files via File Adapter through FTP having a HTTP proxy as firewall

Dear experts,
I am having a issue trying to send a file via FTP with the File Adapter. My client has a HTTP proxy with authentification required as firewall in order to send files via FTP.
I've tried several solutions but I cannot find a way to add the proxy name, user and password in the communication channel.
Any ideas?
Thanks in advance.
Best Regards

Hi,
Unfortunately those changes didn't work. The adapter is not able to establish a connection within the FTP server. These are the parameters I added:
-Dhttp.proxy.user=<usename>
-Dhttp.proxy.password=<userpassword>
-Dhttp.proxyHost=<proxy.domain...>
-Dhttp.proxyPort=80
-Dhttp.nonProxyHost="*domain1.com domain2com"
-Dhttps.proxy.user=<usename>
-Dhttps.proxy.password=<userpassword>
-Dhttps.proxyHost=<proxy.domain...>
-Dhttps.proxyPort=80
-Dhttps.nonProxyHost="*domain1.com domain2com"
And just in case, we tried with these other parameters at the same time.
-Dftp.proxy.user=<usename>
-Dftp.proxy.password=<userpassword>
-Dftp.proxyHost=<proxy.domain...>
-Ddftp.proxyPort=80
-Dftp.nonProxyHost="*domain1.com domain2com"
The errors in the adapter engine's log are:
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Socket connection timed out: <ftp ip address>
By the way, we are using PI 7.0.
Thanks in advance
Edited by: SAPIMSA . on Apr 20, 2011 4:08 PM

G5 crashes when I try to send files via iCHAT

No idea whats causing it but when I try to send files via ichat it gets about 10mb in and then the machine crashes....
Don't think its to do with my broadband connection as this seems stable and am not running any other programs in the background.......Desparate to sort this -please help.

Hi Mart06,
Welcome To The Apple Discussion Pages.
I can not find anything on the AIM site that suggests there is a Limit on file sizes.
The largest one I have tried myself was 9.2Mb
The closest thing I could find to the point in question was the last question on this page.
If the file is not stuffed so far you could try that to make it smaller.
I have AIM 4.7 for Mac and can not see any info in the Help there about any limit to the size of File Transfers.
4:12 PM Wednesday; March 8, 2006

I can't send files via bluetooth

My problem is that I can receive files via bluetooth, but I can't send files via it. Actually I can see the "receiving file" message on mobile, but as I wanna accept that file, I see a "receiving file" error. I tried this with several other phones, but I still have the same problem. I see this message when I run bluedevil-sendfile from terminal:
http://pastebin.com/APy9NcXh
Last edited by mghaffari (2012-06-09 19:30:17)

Is your problem similar to this?
https://bbs.archlinux.org/viewtopic.php?id=142658

I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing? Thank you in advance for your help.

Are you trying to send a message to a cell number or an email address? iPad does MMS, not SMS, meaning it can't send a message to a number. It can send a message to an email address........

HT3529 My messages won't send to any other phones. Only iPhones. Help?

My messages won't send to any other phones. Only iPhones. Help?

hrams18 wrote:
My messages won't send to any other phones. Only iPhones. Help?
Settings -> Messages -> do you have "Send as SMS" ON?
If not, then your messaging app will be restricted solely to Apple's iMessage service, which only works between iOS devices.

How can I send files via Bluetook from my Tour to other phones?

How can I send files via Bluetook from my Tour to other phones?
I have even been able to pair to the other device, but I don't see the option to send/copy/move files through Bluetooth.
I can only send my Address book via bluetooth.
Please help!!

Hi and Welcome to the Community!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the receiving device. Be aware that RIM only supports BT file transfer between BBs...with other devices is technically unsupported. But, it usually works, as long as the two devices are paired, trusted to each other, and each have all of the correct BT services enabled for the configuration of the other device.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My messages won't send

My messages won't send. I have an iPhone 4 with 3G and all day my messages have just been stuck halfway on the bad that shows how far your message is until being sent. Other internet things are working perfectly and I'm at my house with wifi.

Hey Gailboggs,
I found an article that can help troubleshoot issues with the Messages application on your iPhone:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Take care,
Delgadoh

Messages Won't Send To Non-iPhones!

So I woke up and my messages won't send to non-iPhones but they will to other iMessage users. Then , I go to my dial pad and I can call out to non-iPhones. This freaking ***** and I need it fixed NOW or I am switching back to android.

Did you make sure that "Send as text if iMessage is not available" is activated in Settings/Messages?

Messages won't send pictures or files.

Hello,
My Messages in Mountain Lion won't send pictures or files (using imessage). It did work for a few days but has now stopped. The strange thing is Messages beta in Lion still works perfectly. I've tried deactivating anf activating account and still no luck.
Any ideas?
Thanks

Hi,
I've been with the same problem for a couple of days, until finally today Messages simply stopped showing even a the window, so absolute inability to use it.
Considering that reinstalling the operating system is NOT a solution, I searched for something myself.
Pictures are controlled by xpcd, imagent and Messages, and it seems that when the problem arises is because they're using the wrong Apple server.
While this may be solved by Apple in a update (I hope so), in the meantime you can do a workaround (it worked for me on two different machines, and even days old images appeared).
In your Library, there is a folder called Preferences (that is /Users/<your_username>/Library/Preferences). There you should delete com.apple.imagent.plist com.apple.imservice.iMessage.plist and com.apple.imessage.bag.plist, with Messages CLOSED. Then reboot so Messages creates new ones. Also delete all file starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat that end in .lock.
If even then it still is not working, deleting all files starting with com.apple.imagent, com.apple.imservice, com.apple.imessage and com.apple.iChat 100% for sure. But when you reboot you'll find you need to input again your login data for iMessage, FaceTime, Yahoo chat, AIM chat, Google Talk and Jabber (if you used them on Messages/iChat).
This is an annoyance, but less than a whole operating system reinstall or losing the functionality.
After all of this is done you should regain the ability to receive photos, send photos and drag&drop photos.
Regards,
Natalia Portillo
Claunia.com

Cannot send files via Bluetooth from my BB 8310 to my Mac OS X 10.5.5

Trying to send files/pics via Bluetooth from my BB 8310 to my Mac OS X 10.5.5. with no luck.
From the menu options from the chosen picture I want to send, I select "send using Bluetooth"
It then prompts me to select a device.
I select my MacBook (BB and my Mac obviously paired).
Then the a File Transfer message tells me : "Failed to Find Service"
Please help.
Thanks

Tripper: Sorry for my delayed response (very sick dad in the hopsital). Also, sorry I answered the *wrong* question. To transfer files:
On each Mac OS X 10.5-based Mac, from the Apple menu, choose System Preferences.
From the View menu, choose Sharing.
Check (click) the "On" box next to Bluetooth Sharing.
Close the Sharing preferences window.
Select the file that you want to transfer.
Select "Send Using Bluetooth" from the Blackberry menu.
You will now receive a pop-up asking you to select a device. Select the paired computer you want to transfer the file to.
The file will start transferring. If you selected "Ask What to Do" in the Bluetooth prefs,you'll get a pop-up on the computer asking you if you want to accept or decline the file transfer.
That's it. Let me know if you still have problems.
Good luck,
Rene

Send file via bluetooth to windows mobile?

I just got a T-Mobile Dash (made by HTC) running Windows Mobile 5. I can pair it with my iMac G5 (OS X 10.4.10).
With Bluetooth File Exchange 1.7.14, I can send a file from the handheld to the iMac, but not from the iMac to the handheld. I get an error message saying "Device does not have the necessary services". Also, I can't get Missing Sync to work by Bluetooth (although it works fine by USB).
Any suggestions?
Thanks!!
17" iMac G5 Mac OS X (10.4.10)

Hello!I'm trying to set a DAQ system up to send files to a virtual server (both physical server and virtual servers running 2012 R2, Hyper-V as the hypervisor). Currently, the DAQ is able to send to a physical Server 2003 server via FileZilla server. However, that server is well beyond EoL and is being phased out. With Passive Mode disabled, I get the error "You appear to be behind a NAT router. Please configure the passive mode settings and forward a range of ports in your router." So, I've configured passive mode with the External Server IP Address as x.x.x.16 (the physical server) with the port range 20-21. Under these settings, the error goes away, but I am still unable to transfer data. The the firewall is currently off on the physical server for other reasons, but enabled on the virtual server. I believe that it needs to be...
This topic first appeared in the Spiceworks Community

Adobe Reader 11 (XI) won't open file via command line

Hello,
I have posted this question to probably inapropriate topic earlier today, so I am repeating it again.
I installed newest Adobe Reader XI today and when I tried to open certain pdf file via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it is working), so my question is - where can I find new syntax, if there is any? Googling didn't help. Or what else could wrong?
In previous versions I was able to open pdf file (on page 5) like this (all was taken from Help file "Open parameters")
"CompletePathToAdobeReader"/A"page=5""CompletePathToPDF",
ie
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"/A"page=5""d:\V2\DataSheet.pdf"
but now - not that it doesn't open specific page, but it doesn't want to open file at all.
edit:
Operating systems running: Windows 7, Windows XP
Thank you.
Message was edited by: v604

Yes, it reported correctly becuase there is a syntax error in your command. Try spaces between the /A switch and open parameter. Try this:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /A "page=5" "d:\V2\DataSheet.pdf"
Hope this helps.
-Sumit

My I messages won't send. Any ideas ?

All of a sudden my I messages will not go through. It says it was sent, and within a second it says it was not sent. When I retry, it still won't send. These messages are to a person that I text all the time, so I know it did work. Any ideas?

Then to answer your original question, "Yes." The Apple Store Genius Bar can help you.
http://www.apple.com/retail/locator/

Messages won't send files via AIM anymore

Similar Messages

Maybe you are looking for