MetaData operations are not supported when

Dear Experts
I am facing below error when trying to run my add-on in Windows Server 2008 R2 and SQL Server 2008 service pack 2.
Error: MetaData operations are not supported when a user transaction is active
It runs fine in Sql Server 2005.
Kindly tell me a solution to sort this out.
Regards
Shibin

Can we see your code, it looks to me like the error is quite descriptive - its saying you can't do any metadata operation (creating/updating user fields, user tables using userfieldsMD or usertablesMD objects) while in a transaction.
Previous SDK examples have shown that you can do it, but they it is not possible - it may be that SQL 2008 has a tighter control over this. (Did you also do a B1 upgrade, or just change SQL version?)
Are you running a transaction?

Similar Messages

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs

Could someone please tell me is this 100% correct?
"RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs"
Any ideas why? Does anyone have a way around this?
As a workaround I was thinking of setting up one broadcast SSID for guests and one non-broadcast SSID for RADIUS assigned VLANs, however i'd prefer to have both broadcast due to numerous Vista and PDA connection issues.

Hi.
Thanks for your reply.
That is what I would like to do; have one SSID and assign the users to different VLANs based on policy.
I have all the VLANs and subinterfaces set up correctly and working independently, but the VLAN assigment does not seem to work correctly.
If I do a "show dot11 association all-client" the RADIUS attribute appears to have altered the VLAN, but the device has no connectivity and cannot DHCP.
This is with 1130AG in autonomous mode and Microsoft IAS as RADIUS.
Apparently there may be a problem with mbssid and RADIUS assigned VLANs.

Known Issue: Windows Emulators Are Not Supported When Visual Studio Installed in a Virtual Machine (Windows 10 Insider Preview SDK and tools, April 2015 release)

If you install Visual Studio 2015 with the Windows 10 Mobile emulators in a virtual machine, setup will succeed but the emulators will not be available as valid debug targets.

The Windows Emulators require a physical machine that runs Windows 8.1 (x64) Professional edition or higher, and a processor that supports Client Hyper-V and Second Level Address Translation (SLAT). The emulators will not run when Visual Studio is installed
in a Virtual Machine (VM).
The emulators for Universal Windows app development work best with Windows 10.

Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

I'm trying to load photoshop elements 12 on my mac os x and when i click setup.exe i get : You can't open the application "Setup.exe" because Microsoft Windows applications are not supported on OS X.

i'm trying to load photoshop elements 12 on my mac os x and when i click setup.exe i get : You can’t open the application “Setup.exe” because Microsoft Windows applications are not supported on OS X. The premiere elements 12 out of the same box loaded just fine.

An .exe file means you have the windows version. Go get the mac version:
Download Photoshop Elements products | 12, 11, 10
but I hope you have a mac serial number.

I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian

IOS AIR3.6 runtime error 3747 Multiple application domains are not supported on this operating syst

3747
Multiple application domains are not supported on this operating system.
I'm getting this error from an IOS app compiled with air 3.6.
No code has changed from Air 3.5 which is error free. Web app / android versions of the same codebase do not error.
See the stackTrace below ( well done Adobe for providing this since air 3.5 !! )
I use swfloaders for loading embedded swf vector art graphics. This has not caused any issue until now. Should I load all art into the main app's application domain ?
The error does not crash the app and I could suppress it easily but is could the tip of the iceberg because application domains are scary stuff.
Error: Error #3747
        at flash.display::Loader/loadBytes()
        at mx.core::MovieClipLoaderAsset()
        at mx.controls::SWFLoader/loadContent()
        at mx.controls::SWFLoader/load()
        at mx.controls::SWFLoader/initializeHandler()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.core::UIComponent/dispatchEvent()
        at mx.core::UIComponent/set processedDescriptors()
        at mx.core::UIComponent/initialize()
        at com.komodomath.app::ImageSWFloader/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/setMXMLContent()
        at spark.components::Group/set mxmlContent()
        at spark.components::SkinnableContainer/set mxmlContent()
        at spark.components::SkinnableContainer/createDeferredContent()
        at spark.components::SkinnableContainer/createContentIfNeeded()
        at spark.components::SkinnableContainer/createChildren()
        at mx.core::UIComponent/initialize()
        at com.komodomath.lesson::SaveStatusCheck/initialize()
        at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()
        at mx.core::UIComponent/addChildAt()
        at spark.components::Group/addDisplayObjectToDisplayList()
        at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()
        at spark.components::Group/addElementAt()
        at mx.states::AddItems/addItemsToContentHolder()
        at mx.states::AddItems/apply()
        at mx.core::UIComponent/applyState()
        at mx.core::UIComponent/commitCurrentState()
        at mx.core::UIComponent/setCurrentState()
        at mx.core::UIComponent/set currentState()
        at com.komodomath.maingroups::LessonGroup/handleNewLessonClick()
        at com.komodomath.maingroups::LessonGroup/___LessonGroup_KButton1_click_lessonOver()

same issue as http://forums.adobe.com/message/4736711

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
G

Hello..when I download attachments from any email..iPages opens and says some features are not supported and cuts out photos and lengthens my attachments

hello..when I download attachments from any email..iPages opens and says some features are not supported and cuts out photos and lengthens my attachments

What format are the attachments? If Pages will not display them properly you will need an application that does. Pages usually opens word documents but can give problems at times, if they are MS Word documents, try Libre Office or failing that you may have to purchase MS Word for Mac, maybe you will need to buy the complete Office suite.
The other possiblity is that you already have a suitable application and Pages is loading the file by default, if so change the default application to open that file type.

Getting this error when saving: Names longer than 31 characters are not supported on the destination volume

I've just tried to save a document in Pages and got this error
Names longer than 31 characters are not supported on the destination volume
Never had a problem like this before. I haven't changed disks or formatted disks. Running latest Yosemite 10.10
The only reference I can find to this error on the internet says that it's for applications prior to OS X which I think we can discount.
The only other reference I can find in the support community relates to one person with problems saving attachments in Mail and dates from early 2014.
Can anybody give me a suggestion on what I might need to do?
Thanks

What format are you saving to?
Where are you saving the files to and what is that volume formatted as?
Have you tested with files from other applications, such as TextEdit?
Peter

Query Problem - Exclude operation is not supported for this characteristic

Hello all
I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this.
We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit.
When we are in the report and try and drag out some profit centres or exclude some) it will not allow it and we get the following message: -
'Exclude operation is not supported for this characteristic'
Does anyone know why this is happening. I
Any ideas?

Hi Andrew,
if you have a chance confirm this with SAP Support, but I think excluding hierarchy nodes is not supported. The reason for this is the fact that it is not quite clear what should happen to the hierarchy structure when nodes are excluded. For example, what should happen to the value of the parent? Should it still contain the value of the excluded node under it?! or not?! One might want it one way, others might find the other more convenient.
Hope this helps.
Regards,
Maxim

How to Overcome DomainOperationEntry overloads are not supported in C#

Hi Team ,
I have a assigmmnet to finsh . requerment is
1) I have to Comboboxes one is cmbDomain , second one is cmbSubDoamin
based on selected value in cmbDoman , cmbSubDoamin has to fill.
for this I am using WCFRIA Serivice
In sercive I have two methods like bellow.
//for Domain
public IQueryable<DomainGroup> GetDomainGroups()
return this.ObjectContext.DomainGroups;
// for SubDoamin
public IQueryable<Domain> GetDomains()
return this.ObjectContext.Domains;
//for subdomain based on selected value in Domain
public IQueryable<Domain> GetDomains(string selectedDomain)
return this.ObjectContext.Domains.Where(x => x.Title.ToUpper() == selectedDomain.ToUpper());
in Silverlight i implimented bellow code
<riaControls:DomainDataSource x:Name="source" QueryName="GetDomainGroups" AutoLoad="True"> <riaControls:DomainDataSource.DomainContext>
<domain:DomainService1/> </riaControls:DomainDataSource.DomainContext>
</riaControls:DomainDataSource>
<riaControls:DomainDataSource x:Name="SubDomainSource" QueryName="GetDomains" AutoLoad="True">
<riaControls:DomainDataSource.DomainContext>
<domain:DomainService1/> </riaControls:DomainDataSource.DomainContext>
<riaControls:DomainDataSource.QueryParameters>
<riaControls:Parameter ParameterName="selectedDomain" Value="{Binding Path=SelectedValue,ElementName=cmbDomain}"/> </riaControls:DomainDataSource.QueryParameters>
</riaControls:DomainDataSource>
<StackPanel Orientation="Vertical">

<sdk:Label Content="Domain"/>
<ComboBox x:Name="cmbDomain" ItemsSource="{Binding Data,ElementName=source}" DisplayMemberPath="Title" Height="50" Width="100"></ComboBox>
<sdk:Label Content="Sub Domain"/>
<ComboBox x:Name="cmbSubDomain" ItemsSource="{Binding Data,ElementName=SubDomainSource}" DisplayMemberPath="Title" Height="50" Width="100"></ComboBox>
</StackPanel>
if any one help it could be a great support for me .
Srilatha

You can't use overloads.
You need to rename one of your GetDomains:
public IQueryable<Domain> GetDomains()
return this.ObjectContext.Domains;
//for subdomain based on selected value in Domain
public IQueryable<Domain> GetDomains(string selectedDomain)
return this.ObjectContext.Domains.Where(x => x.Title.ToUpper() == selectedDomain.ToUpper());
from
https://msdn.microsoft.com/en-us/library/ee707366%28v=vs.91%29.aspx?f=255&MSPPError=-2147217396
General Rules for using Inheritance
The following rules apply to using inheritance with RIA Services.
Inheritance is supported only for entity types. Non-entity types are treated as the type specified in the domain service operation signature.
Interface types are not supported for return values or parameters in domain service operations.
The set of types in an inheritance hierarchy must be known at the time of code generation. The behavior for returning a type not specified at the time of code generation is unspecified and implementation-dependent.
The virtual modifier on public properties and fields for an entity type is permitted but ignored when generating the corresponding entity type on the client.
Method overloads for domain service operations are not permitted.
The new (C#) and Shadows (Visual Basic) keywords on public properties are not allowed on entity types and will result in an error when client code is generated.
LINQ query capabilities related to inheritance cannot be translated for execution of domain service methods. Specifically,
OfType<T>, is,
as, and GetType() operators and methods are not supported. However, these operators may be used directly against
EntitySet or
EntityCollection<TEntity> in LINQ to Objects queries.
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles

MetaData operations are not supported when

Similar Messages

Maybe you are looking for