Metadata Repository install to existing db
Hello,
I am trying to install and configure a Metadata Repository to a 10.2.0.1 database, I know that you must use the Repository creation assistant, but i am having trouble locating this tool. I already have the db installed and set up. Does the repCA ship with the database, or do I need to install the application server next to access it?
Cheers!
Jordan
Would I be able to accomplish the same task using the Repository Administration Utility that ships with Developer Suite? There're no such utility for Metadata Repository in Developer Suite!!! There are however a tool to create a Designer Repository, but that's something quite different.
Please note that if you're going to use a 10.2 database, then you must download the version I wrote! There's a version that comes on the AS10g Disk set, but that doens't support 10.2.
Regards,
Martin
Similar Messages
-
Hi there, I seem to have a unique issue.
I have the following config of 10.1.4.3 IDM :
SSO in a separate Oracle home
OID in a separate Oracle home
DB (10.2.0.50) in a separte OH and metadata repository installed in this DB
and this is set up in ASR replication mode with other similer setup.
Task : Apply 10.1.2.3 OracleAS patchset.
The story:
To be fully compliant according to Orcale we ned to apply 10.1.2.3 patch. This patch has two components - a software update and a Metadata Repository (MR) update.
I have applied software update to all the Oracle homes above (with the exception of DB ofcourse).
But to apply MR update I have to do it from a mid-tier OH that also has MR installed, I have none.
I tried installing MR update from SSO and OID oracle home but it would not allow me , I got this message :
The Metadata Repository Update cannot be run from the selected ORACLE_HOME.
The Update must be run from either an Identity Management with Metadata
Repository installation ...
But we have no middle-tier using this MR, and from this metalik note, it seems applying MR update is not mandatory, only a desirable housekeeping execrcise . :
Understanding How AS 10g Patch Sets Update the AS Metadata Repository [ID 795143.1]
Exract from that note :
a. apply the binary update to each AS Oracle Home in the AS Farm.
b. finally, if possible apply the MR update exactly once from any home that allows it to be run.
also from the same note :
Scenario 6: Applying the 10.1.2.3 AS patch set to a 10.1.4.3 Identity Management home.
The 10.1.2.3 AS patch set is a required patch set, as documented in :
Note: 465847.1 Oracle Identity Management 10g (10.1.4.0.1) Release Notes Addendum.
In this case, the MR Product schemas will not be directly accessed. It is however good practice/ housekeeping to apply the MR update in order to keep the MR in line with the binary patch sets.
My question :
I am correct in my understanding that apply 10.1.2.3 software update only is neccessary, applying the MR update is only desirable house keeping and not mandatory ?
Would you say this is the correct assessment. if not how would you go about applying the MR update ?
Thanks in advance for your answers.
NarsimhaTooManyOracleToysToLearn wrote:
Upgraded OPatch to 1.0.0.0.64
Attempted to apply 10.1.2.3 patchset 5983622
Encountered 2 issues, 1 has prevented us from continuing
Issue 1: Received following on stdout ...
failed to get the ias-instance ...
Error: no ias instance to append to
Val: 3Did you source the correct env file before applying the patch? --> $INST_TOP/ora/10.1.3/<CONTEXT_NAME>.env
Issue 2: When running the Configuration Assistants, it fails right away on step "Run One-Off Patches".
It's looking for the ocm.rsp. Received the following:
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
EBS environment: no OCM installation and configuration.
To run in silent mode, OPatch requires a response file for Oracle Configuration Manager (OCM).
Run /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp to generate an OCM response file. The generated response file can be reused on different platforms and
in multiple OPatch silent installs.
To regenerate an OCM response file, rerun /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp.
ERROR: OPatch failed because of cmd. args. problem.Error Applying Patch Using OPatch "This version of OPatch is obsolete", "OPatch failed because of cmd. args. problem" [ID 762403.1]
10.1.4.3 Patch Set Pre Installation Step: dcmctl updateconfig FAILS: Fatal Relocation Error [ID 849474.1]
Getting Error 'OPatch requires a response file for Oracle Configuration Manager (OCM)' while Running OPatch [ID 727991.1]
Thanks,
Hussein -
Deregister Metadata Repository
I am having issue deregistering the Metadata repostiory. How can i deregister the Metadata repository from an existing portal installation? I tried to follow the instructions from the MRCA guide (Deregistering Metadatarepostiory) but ran into the following scenarios.
When i shutdown the infrastructute instance and perform the deregistration thru the MRCA wizard, it errors out saying the Oracle Internet Directory should be up in running.
When i start the infrastructure instance, it says that the Metadata repository is used by the Oracle Internet Directory.
When i try to deregister the Metadata repository using MRCA, it says that the
Your help will be appreciated. Please advise.I tried the follwoing procedure but did not work.
http://www.oracle.com/technology/documentation/1012_solaris/repca.1012/repca/remove.htm#CHDBHGDF
Please advise -
Problems Installing Oracle Metadata Repository into Existing Database
Folks,
I'm slowly going through the process of installing the Metadata Repository into a 10g database, using RepCA I've managed to determine all the DB parameters required for setting etc. The only thing RepCA now reports is missing is the Ultrasearch schema & packages.
I've copied the ultrasearch dirs from the RepCA distribution and placed them in my $ORACLE home dir, I've also attempted to run the admin install script 'wk0setup.sql' which throws out several errors listed below. If anyone has successfully gone through this process on Solaris I would love to hear your about your experience & advice.
Error 1. =================================================
User is WKSYS
... loading ultrasearch_db.jar
call sys.dbms_java.loadjava('-v -f -r -s -g PUBLIC $ORACLE_HOME/ultrasearch/lib/ultrasearch_db.jar', '((* wksys) (* public))')
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures
occurred during processing. Check trace file for details
Error 2 (File Doesn't exist at all) ==============================
SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.pkh"
Error 3 (Again the file doesn't exist at all) ========================
SP2-0310: unable to open file "/oracle/1020a/ultrasearch/admin/wk0launchq.plb"
===========================================================
Regards
AustinHi guys,
I have used copy of that package from Oracle Identity Management installation, version 10.1.4.0.1 and have been able to complete manual Ultra Search installation. It's valid in dba_registry. After that I did run RepCA and metadata schemas have been created successfully in existing database, version 10.2.0.2. Be careful about database version, only 10.2.0.2 is certified with Oracle Identity management, so you need to run patch for upgrade to 10.2.0.2.
Hope this helps.
Dali
Message was edited by:
dallyz7 -
Does any one know if the Metadata Repository of OracleAS 10.1.2.0.2 can be install on an existing Oracle 10.2.0 database ?
The MRCA tool is giving me this message "Oracle Metadata Repository cannot be loaded into this version of the database. Please see the installation guide for more information on supported database versions ...."
KimAccording to the Installation Guide, Oracle9i Release 2 (9.2.x) and Oracle Database 10g Release 1 (10.1.x) are supported. See the following for more specific information:
http://download-west.oracle.com/docs/cd/B14099_19/sol.1012/repca.1012/repca/intro.htm#CHDEAJFB -
I am trying to Install Portal Forms Reports 11, so I had to Install all prerequisites
My Machine Specifications:-
1- Oracle Enterprise Linux 5.5 x86-64
2- DB 11g R2
3- WebLogic 10.3.3 (X64)
4- Oracle Identity Management 11.1.1.2.0
I was executed the inspre11.pl with -op1
than I was trying to Install SSO Metadata Repository Creation Assistant (10.1.4.3.1)
in the last step (Step 7 - Loading Repository)
http://lh3.ggpht.com/_bMH90GEkTL4/SwW1jlNHzFI/AAAAAAAABjE/ZZm55usPKu0/s1600-h/clip_image054%5B3%5D.jpg
I encountered this error :-
ERROR - Unable to connect to the database. See the log file for details. Check that you have provided the proper service name for the database, that the database is running, the database connection information is valid, and that the database is set up for password file authentication. For more information, click the Help button.:ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_IAS_VERSION.SET_COMPONENT_LOADING' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
what can I do ? my Database is start up and the connection is OK !!!!!!!!!!!
I followed the oracle documentation:-
Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1) E12002-02 October 2009
now we are going to 2011 !!!!!!!!!!!!!!!!!!!
Is there another newer Installation guide from oracle?
thank youGood question, rozester.
I encountered this problem also, while trying to install the SSO MRCA 10.1.4.3.1 on 64-bit RHEL5 (though it's at version 5.7 but I'm positive that won't make any difference to the result).
This may or may not match your situation, but when I looked in the log file $ORACLE_HOME/assistants/repca/log/repca_<datestamp>.log, I saw what was probably the reason behind the error:
<$ORACLE_HOME>/bin/sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
I think I remember seeing that the link operation during installation had failed, but I hoped it would be OK. And it possibly would have been, if I'd remembered to specify the destination database Oracle home rather than the SSO MRCA Oracle home when prompted (on the page where it asks for database home and log file path). Perhaps then it would have used the sqlplus binary from the database oracle home, and since that one definitely works, it might have worked. But before I thought of that, I did a workaround; I installed the SSO MRCA on a 32-bit RHEL5 box (using the same directory paths) and copied the shared library files to the 64-bit box's shared library directory via scp as follows:
cd $ORACLE_HOME/lib; scp -pr * oracle@rhel64box:$PWD/
When I re-ran $ORACLE_HOME/runRepca, it then worked without error. Another thing I could have tried is just running runRepca on the 32-bit RHEL5 box, and that probably would have worked too, but it probably would have been a lot slower compared to running it locally on the destination server; it's takes quite a while as it is.
Hope this helps. I'm sure it'll help me if next time I do this I forget what I did before and go searching again ;-) -
Rdbms patchset problem in installing metadata repository
hi ,
i m facing this problem while installing metadata repository for Oracle Application Server10g(9.0.4.0.0)
the error is ,
"the catalog objects stored in this database donot have the same version as the database software.
please review the post-installation steps of the RDBMS patchset and make sure that you have run
all required SQL scripts."
plz helpHello,
You can login to the Metadata database and execute:
select * from dba_registry;
This will give you the version numbers for database components.
Vlad -
Fail to install OAS10g Metadata Repository
I'm trying to install a OAS10g Metadata Repository in the database 10.1.0.4 on Solaris 8 . I meet a error :
Loading Repository for OracleAS Portal using the specification file /u/app/oracle/product/bi/portal/repca/ptlload.xml
Repository Loader actionStarting
[CustomExternalProcessAction] Command line: /u/app/oracle/product/bi/jdk/bin/java -cp /u/app/oracle/product/bi/assistants/opca/jlib/opca.jar:/u/app/oracle/product/bi/portal/jlib/ptlshare.jar:/u/app/oracle/product/bi/jdbc/lib/classes12.jar:/u/app/oracle/product/bi/jdbc/lib/nls_charset12.jar oracle.webdb.config.PortalConfigAssistant
[CustomExternalProcessAction] Process exited abnormally
[CustomExternalProcessAction] Action failed due to: oracle.ifs.utils.action.ActionFailedException: Some of the operations have failed during this OracleAS RepCA session. Please see the log file at /u/app/oracle/product/bi/assistants/repca/log/repca_2005-07-06_05-32-40_PM.log for further details.
ERROR - Some of the operations have failed during this OracleAS RepCA session. Please see the log file at /u/app/oracle/product/bi/assistants/repca/log/repca_2005-07-06_05-32-40_PM.log for further details.
oracle.ifs.utils.action.ActionFailedException: Some of the operations have failed during this OracleAS RepCA session. Please see the log file at /u/app/oracle/product/bi/assistants/repca/log/repca_2005-07-06_05-32-40_PM.log for further details.
at oracle.ias.repca.actions.CustomExternalProcessAction.perform(CustomExternalProcessAction.java:153)
at oracle.ifs.utils.action.ActionQueue.performActions(ActionQueue.java:303)
at oracle.ifs.utils.action.ActionQueue.run(ActionQueue.java:229)
at java.lang.Thread.run(Thread.java:534)
Please help me. Thans.I met the same problem ... at 60% of the installation procedure.
Did you solve the problem ... ?
Cause I'd built a 10gR2 RAC.. and I wanna store the AS's metadata into
RAC. I'd trace the class, and convert to the original code. But it's very hard to understand how it works.
It was located under oracle/ias/repca/actions/CustomExternalProcessAction.class
Any body can help me ? Please ! -
Can OID/IM components be moved to a new Metadata Repository?
Hi
I've looked around on Metalink but can't find any document that suggests this can be done, but I thought I would ask the question anyway (two iin fact):
1. Can an existing OID/IM setup be configured so as to oint to a new metadata repository? Is it possible to install a new MR and then associate the IM components away from it's existing MR to a new MR?
2. In an OracleAS Cold Failover Cluster (IM) topology, I've read contradictory notes (or I've misunderstood). Do the OID and MR components have to be on the same box? Or can they be on different boxes?
Regards
Andy#1, refer this:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/chginfra.htm#BGBDDDBE
#2, refer following note on MetaLink:
368688.1 Master Note:How to Split AS10G Infrastructure Components Including the Metadata Repository and Identity Management
Hope this helps.
Thanks
Shail -
OAS 10g metadata repository creation assistant & database version issue
Hi,
I have to install Oracle Application Server 10.1.2.0.2 on a server which already has an Oracle database 11g running on it and I dont want to install another database due to the load factor. I am not sure if I could use that database
(version 11g) for the metadata repository. I know that we can use an existing database for the creation of metadata repository using the metadata creation assistant but I am a bit worried about the version of the database which is 11g whereas the application server and the metadata creation assistant both are 10.1.2.x.
Your help is highly appreciated.
Cheers,
OmerMRCA 10.1.2.0.2 cannot be used to install a repository in an 11g database. If you want to use MRCA 10.1.2.0.2 with an 11g database, you will need to install a 10g database first, create the metadata repository and then upgrade the database to 11g. Not applicable in your environment as you already have a 11g database.
Regards,
EJ -
Deregister metadata repository after Internet Directory deleted
I deinstalled Internet Directory before deregistering it from the metadata repository first. Now I want to re-install Internet Directory on the same repository but it says the repository has been registered to an Internet Direcory and doesn't allow me to do that. I cannot deregister or remove the metadata repository because it always asks for the host and port of the Internet Directory, which doesn't exist any more.
Do I need to reinstall the whole database? Anyone has the idea on how to remove the registration information from a metadata repository without referring an Internet Directory?
Thanks a lot.I had the same issue and here is how I resolved it:
Logged in to the Metadata Repository as the SYS user. Drop user ODS with the cascade option. This will remove the information from the database. In order to rebuild the Metadata Repository, go to $ORACLE_HOME/ldap/admin. You should have a script called newldap.sql. Login to the DB as SYS and run this and this will recreate the parts that where removed therefore giving you a 'cleaned' Metadata Repository.
By the way, this is not recommended by Oracle!!! -
Invalid log directory in Metadata Repository Creation Assistant
Hi all,
I have on my laptop with OS Vista 64bit installed database version 10.2.0.3.0 and standalone AS (resp. whole SOA Suite) version 10.1.3.3. I wanted to install and configure OID not to separate, but to existing database. At first, I downloaded and successfuly installed Metadata Repository Creation Assistant (as_windows_x86_mrca_101401_disk1/2.zip). But when I run Oracle RepCA, in step 1 of 2: Specify Oracle Home Path, I get error Invalid log directory.
As Oracle Home Path I typed D:\oracle\product\10.2.0\db_1 (as it is in registry)
As Log File Directory I tried D:\product\mrca\assistants\repca\log, D:\log etc.
Could you help me, how to solve it?
Thanks,
PeterThere is a Patch for Windows Server 2008.
-->
Patch 7497474
Description: 10.1.4REPCA ON WIN 2008: NOT ABLE TO LOAD SCHEMAS USING REPCA INTO THE DB
For me it was the solution. Install the patch (follow the instruction in the readme.txt)
After that the RepCA accepts the Log File Directory. -
We have IM 10.1.4.3 and OracleAS 10g R2 10.1.2.3 on RedHat 4.6 with non-colocated metadata repository.
Plan is to upgrade RedHat to newest version 5.5. RedHat does not support upgrade with major version and Oracle said that OS vendor is responsible for package compatibility and there is no need for relink Oracle software.
So, only solution is to do fresh install OS, IM and OracleAS.
My question: is it possible to install IM 10.1.4.1 against higher version of metadata repository? Is there any workaround?
tnx in advance
Matej"# Error: Already exists" suggests that schema at AD side is already extended. You mentioned that automatic schema upload process stopped abruptly. There is likely chance that AD schema might be extended partially or fully.
2nd thing is you can apply BP05 patch once you have identity server running. BP05 does not need to be applied before.
Also there is option to manually extend schema directly in AD. There is one folder in installation directory which has .ldif files with schema objectclasses.
At the start of identity server , it is not able to find the configuration DN & seach base to read configuration data , therefore it is failing.
You have two options here: 1. Reinstall 2. Manually extend schema and then install identity server.
You can refer to Atul's blog : &raquo; OAM 10.1.4.3 Installation Part II &#8211; Indentity Server Installation Online Apps DBA: One Stop Shop…
Hope this helps.
Regards
Aakash -
Tuning 9.0.2 Metadata Repository
With Portal 3.0.9.8.x, the Portal schemas were installed to a pre-existing database instance. In 9.0.2, the default is for the schemas to be created in the 'Metadata Repository' of the Infrastructure installation.
For 3.0.9.8.x, our DBA created an instance with 2GB of temp tablespace, 2GB of rollback tablespace, and 6GB of USERS tablespace (which is where the portal schemas are stored). In general there are a few large tablespaces with relatively low 'used %'.
In 9.0.2, I see a TEMP of 40MB, a PORTAL_TEMP of 20MB, a PORTAL tablespace of 75MB, and so on. In general, there are a lot of small tablespaces with relatively high 'used %'.
Can I count on the Metadata Repostitory to have been created with parameters that should support a small-to-medium Portal without incident? (We create portals for clients that would typically only have hundreds of users.)
If I send our DBA in to tune this instance, what does he need to beware of in terms of all the other applications (i.e. the Infrastructure) that will be using it? We don't want to have to install yet another db instance just for the Portal schemas.
The documentation that I've seen so far (e.g. 9iAS Admin Guide) doesn't provide much guidance when it comes to the db instance.
Any advice or experience you could share would be appreciated.
Thanks!Sorry, but this is not a Designer question. Please repost this message on the 9Ias Portal forum.
-
Metadata Repository Creation Assistant fails with ORA-01119
<!--[if gte mso 9]><xml>
Normal
0
</xml><![endif]-->
Hi All,
My DB version is 10.1.0.2 and I've upgraded the same to
10.1.0.4.2
In order to install B2B, I started off by installing the
Metadata Repository Creation Assistant.
After the initial steps, I got the following message:
<h5>
OracleAS RepCA was not able to find the Oracle Text Supplied
Knowledge Base in the database specified. </h5>
<h5>If you are planning to use this repository for installing
OracleAS Portal, you have to install Oracle Text Supplied Knowledge Base.
Oracle Text Supplied Knowledge Base can be installed in the database using
Oracle Database 10g Companion CD.</h5>
<h5>
If you are not planning to use this repository for
installing OracleAS Portal, you may continue further. Continue? Yes/No?</h5>
I continued with "Yes" and I chose the storage option as
"Regular or Cluster File system". In the next step -<strong>Specify Tablespace
information</strong>, I chose to install it in the C:\ , where there was approx 18GB
of free space. Yet, I encountered the following error:
<h5>
Unable to create tablespace. Please see the OracleAS RepCA
log file for more details.</h5>
<h5>ORA-01119 error in creating database file 'string'</h5>
<h5>Cause: Insufficient space on device or invalid database file
path.</h5>
<h5>Action:</h5>
<h5>a) Verify the database file path specified.</h5>
<h5>b) Decrease the size of the requested file or allocate a
file on another device with more available space. If a file size was not
specified in the statement, then specify a file size smaller than the available
space on the device.</h5>I have verified the database file path. I also tried
decreasing the size. I further tried using another directory where there was
11GB of free space. It still didn't work.
Please HELP!
-Suhas.Hi Suhas,
Can you please do the following?
1. Please try pointing to C:\b2b.dbf file during installation and see if the installation goes fine or not.
Regards
Vipin R.S
Maybe you are looking for
-
How can I get ExportPDF to not add hyphens when converting to Word?
I am using the online service ExportPDF, at https://cloud.acrobat.com/exportpdf .It automatically adds hyphens in the resulting Word document for all words that were auto-hyphenated at line ends in the original PDF. How can I get it to convert these
-
My 4S Bluetooth stopped pairing to my Ford Explorer after i updated to ios 8.0.2
I have a 4S, it has been able to talk to my ford explorer no problem until i updated to ios 8.0.2 Now when i pair it, i get "in Privacy" on my ford sync screen and a timer is running. This is as if i was in a private call on my phone ( ie not using t
-
Downlad File procedure - inserting records in a table
This procedure, I am using to count the downloads from my application, in my workspace on apex.oracle.com, used to work until couple of days ago: CREATE OR REPLACE PROCEDURE "DOWNLOAD_MY_FILE" (p_file IN NUMBER) AS v_mime VARCHAR2 (48);
-
On Cisco 1242 AP you can "sh dot11 associations all-client | include Address | Bytes" and this will give you a list of all associated clients and how much data they have transferred. Other than rebooting the AP is there a way to clear those stats so
-
I log in, and on the next screen it says, "You have been signed out Please sign in to continue"