Metastat problem in Production server

Dear frinds,
This is the result of metastat in Production server and system has rebooted.
d50: Mirror
Submirror 0: d52
State: Okay
Submirror 1: d51
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 41945472 blocks (20 GB)
d52: Submirror of d50
State: Okay
Size: 41945472 blocks (20 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s6 0 No Okay Yes
d51: Submirror of d50
State: Okay
Size: 41945472 blocks (20 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s6 0 No Okay Yes
d40: Mirror
Submirror 0: d42
State: Okay
Submirror 1: d41
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 12587712 blocks (6.0 GB)
d42: Submirror of d40
State: Okay
Size: 12587712 blocks (6.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s5 0 No Okay Yes
d41: Submirror of d40
State: Okay
Size: 12587712 blocks (6.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s5 0 No Okay Yes
d30: Mirror
Submirror 0: d32
State: Okay
Submirror 1: d31
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 41945472 blocks (20 GB)
d32: Submirror of d30
State: Okay
Size: 41945472 blocks (20 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s3 0 No Okay Yes
d31: Submirror of d30
State: Okay
Size: 41945472 blocks (20 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s3 0 No Okay Yes
d20: Mirror
Submirror 0: d22
State: Okay
Submirror 1: d21
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16780224 blocks (8.0 GB)
d22: Submirror of d20
State: Okay
Size: 16780224 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s1 0 No Okay Yes
d21: Submirror of d20
State: Okay
Size: 16780224 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s1 0 No Okay Yes
d10: Mirror
Submirror 0: d12
State: Needs maintenance
Submirror 1: d11
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20972736 blocks (10 GB)
d12: Submirror of d10
*State: Needs maintenance
Invoke: metareplace d10 c0t1d0s0 <new device>
Size: 20972736 blocks (10 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s0 0 No Maintenance Yes
d11: Submirror of d10
State: Okay
Size: 20972736 blocks (10 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s0 0 No Okay Yes
How can i resolve the D10 and D12 status plesae help me.
Thank you!

to sync again, execute
metareplace -e d10 /dev/dsk/d12

Similar Messages

  • Facing an problem in production server cluster

    Dear All,
    I am facing an problem in production server, we are using Ecc5, windows 2003 with Oracle 9i and  with the is clustering node A and node B
    The problem is suddenly the sap sever get restated and the resources get move from  one node to another e.g. .node A to node B but not all the resources move to one node ,  except the kernel drive where sap is installed it is in different node and rest in other  node.  At present time both the node are active.
    How to move the all the resources into one node I have tried before also but my  experience in not good
    One time I have to recover the database and another time I have hard time to start service of sap R/3.
    This time I have the same problem please suggest me how to do it in correct way and to solve this problem.
    Regards,
    Shiva

    Hi,
    This is related to virus problem. Pls check virus with latesh dat.
    Anil

  • Smartform working fine in DEV and Quality But Problem in Production server

    Hi
    i had done a smartform ..that is working fine in devlopement and
    quality server  but the data in few of the column not appearing in production
    server.i had debug it and found prolem in S0RT Syntax ..Had not faced this kind of problem before i had 20 records in my itab.
    iam sorting it by vbeln and posnr ....
    and deleting the adjacent duplicates ....comparing veln and posnr...
    both are same ..in 20 records .
    but iam fetching the adrees number at first in the loop.
    so the first record of table is with adrs number...
                                                       vbeln          posnr
    a1       a2      a3            a4    a5     a6              a7              a8          a9
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403  290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    if i sort the above table in devlopement and quality ..it will be in the same way
    as above but in production it gets sorted in this way
                                                       vbeln          posnr
    a1       a2      a3            a4    a5     a6              a7              a8          a9
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607 471403  290644
    and when i delete duplicate only i get
                                                       vbeln          posnr
    a1       a2      a3            a4    a5     a6              a7              a8          a9
    ARE1 2006 1000029708 1   2011 513009012 CIS/M08607              290644
    in this where i dont get the adrs number so cant get adrs detail...
    Can anyone theie tell me what is the problem with it ONLY IN PRODUCTION SERVER..
    ITS WORKING FINE DEV  AND QUALITY SERVER...
    REGARDS....

    are u using my DELETE keywords ?
    if yes , then use
    delete adjacent duplicates from itab comparing all fields.
    Regards
    Prabhu

  • Urgent - Serious problem in production (server crashes unexpectedly)

    Hi,
    We got the following error in production server and caused the server to
    exit immediately. It just crashed the server. There are some jsp calls
    before this error.
    Tue Jan 02 14:20:23 EST 2001:<E> <HTTP> --------------- nested
    within: ------------------
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Attempt to
    register new response:
    'weblogic.servlet.internal.ServletResponseImpl@2df8587' with pending
    response: 'weblogic.servlet.internal.ServletResponseImpl@2dffb64' ]
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Error.<init>(Error.java:53)
    at weblogic.utils.NestedError.<init>(NestedError.java:15)
    at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
    at weblogic.utils.Debug.assert(Compiled Code)
    at weblogic.socket.JVMSocketHTTPServer.registerPending(Compiled Code)
    at weblogic.socket.TunnelRecv.service(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.dispatchNextMessage(Compiled Code)
    at weblogic.socket.NTSocketMuxer.processSockets(Compiled Code)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:19)
    at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
    Our operating environment is as follows -
    WL 4.5.1 SP 13 on Windows NT 4.0 SP 5
    Execute thread count = 30
    JDBC connection pool = 25 min, 100 max.
    JDBC driver = oracle thin drivers.
    JDK 1.1.7B
    Oracle 8i database
    Thanks in advance.
    -SG

    First, you should verify that SP13 has been installed properly as it addresses
    several "assert" errors. If the service pack was installed per the installation
    documentation, you should contact BEA WebLogic support and report this problem
    for an answer/resolution.
    Thanks,
    Charlie
    PS - Please don't post your messages to multiple newsgroups as this tends to
    clutter them and most message are not relevant to more than one subject
    category.
    The views expressed in this posting are solely those of the author, and
    BEA Systems, Inc. does not endorse any of these views.
    BEA Systems, Inc. is not responsible for the accuracy or completeness
    of the information provided and assumes no duty to correct, expand
    upon, delete or update any of the information contained in this posting.
    Sudheendra Galgali wrote:
    Hi,
    We got the following error in production server and caused the server to
    exit immediately. It just crashed the server. There are some jsp calls
    before this error.
    Tue Jan 02 14:20:23 EST 2001:<E> <HTTP> --------------- nested
    within: ------------------
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Attempt to
    register new response:
    'weblogic.servlet.internal.ServletResponseImpl@2df8587' with pending
    response: 'weblogic.servlet.internal.ServletResponseImpl@2dffb64' ]
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Error.<init>(Error.java:53)
    at weblogic.utils.NestedError.<init>(NestedError.java:15)
    at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
    at weblogic.utils.Debug.assert(Compiled Code)
    at weblogic.socket.JVMSocketHTTPServer.registerPending(Compiled Code)
    at weblogic.socket.TunnelRecv.service(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
    at weblogic.socket.MuxableSocketHTTP.dispatchNextMessage(Compiled Code)
    at weblogic.socket.NTSocketMuxer.processSockets(Compiled Code)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:19)
    at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
    Our operating environment is as follows -
    WL 4.5.1 SP 13 on Windows NT 4.0 SP 5
    Execute thread count = 30
    JDBC connection pool = 25 min, 100 max.
    JDBC driver = oracle thin drivers.
    JDK 1.1.7B
    Oracle 8i database
    Thanks in advance.
    -SG

  • RFC Connection Problem between Production Server & Solution Manager

    Hi,
    I want to make a RFC Connection between Production Server & Solution Manager.
    But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a  Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
    +Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
    I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
    Thank you.
    Edited by: varun@pcl on Jul 31, 2010 4:40 PM

    Hi
    Mention which Client u login and valid username and password from both PROD Server and Solman .
    https://websmp201.sap-ag.de/support under Solman manager .
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
    Regards

  • Alignment Problem in Production server

    Hi friends,
         I am developing one report in which all the amount fields are right aligned and works fine in dev server, but the same report exeuting in  in Production server some of  the amout fields are left-aligned. I am using the same Varient in both the servers .
    Can you please help me how the alignment will change from Dev to Prod server for the same varient.
    Regards,
    Suresh

    Do we have same domain for the field type that is giving issue.
    Check if we have CHAR in Production and CURR/NUMC in Development system!
    And
    Which type of report is this? ALV or Normal?
    Thanks,
    Naveen.I

  • Facing a series of problems in production server

    Dear All,
    I am facing a series of problems.
    We are using ecc5 on windows with oracle 9i.
    Two nodes on cluster.
    1. I am getting error in log file 
    TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
    2. dev_disp getting error *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3893]
    MtxInit: -2 0 0
    3. Suddenly shutdown of server.
    4.E error in nmiconf.log
    I am unable to find the Listener problem because at present it listener is up.
    Please help to find the root cause because there 3 Listener.ora
    1     LISTENER1.log current date.
          2     LISTENER. Log with old date
    And which file and what change I have to do.
    2.What settings have to change in DNS settings?
    3.What is suddenly caused of server shutdown?
    Log file of LISTENER2.log
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener2.log
    Trace information written to E:\oracle\ora92\network\trace\listener2.trc
    Trace level is currently 0
    Started with pid=1332
    TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
    Log file of LISTENER1.log
    Started with pid=1180
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener1.log
    Trace information written to E:\oracle\ora92\network\trace\listener1.trc
    Trace level is currently 0
    Started with pid=1304
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    Log file of LISTENER. log
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 11-AUG-2008 17:10:07
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener.log
    Trace information written to E:\oracle\ora92\network\trace\listener.trc
    Trace level is currently 0
    Started with pid=7440
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1527)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    11AUG-2008 17:10:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=#####1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11-AUG-2008 17:59:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11AUG-2008 18:14:17 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11-AUG-2008 18:17:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    LISTENER.ORA
    LISTENER.ORA Network Configuration File: E:\oracle\ora92\network\admin\listener.ora
    Generated by Oracle configuration tools.
    STARTUP_WAIT_TIME_FSL@@@@-SAP-ORAV = 0
    LISTENER1 =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1528))
    ADMIN_RESTRICTIONS_FSL@@@@-SAP-ORAV = on
    FSL@@@@-SAP-ORAV =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1))
        (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1.WORLD))
        (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(Host = #####)(Port = 1527))
    This file is written by Oracle Services For MSCS
    on Tue May 16 21:20:04 2005
    TRACE_LEVEL_FSL@@@@-SAP-ORAV = OFF
    CONNECT_TIMEOUT_LISTENER = 10
    STARTUP_WAIT_TIME_LISTENER = 0
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1527))
    SID_LIST_FSL@@@@-SAP-ORAV =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    LISTENER_000.ORA
    This file is written by Oracle Services For MSCS
    on Tue May 16 21:20:02 2005
    LISTENER =
      (ADDRESS_LIST=
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=PRD1.WORLD)
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=PRD1)
        (ADDRESS=
          (COMMUNITY=SAP.WORLD)
          (PROTOCOL=TCP)
          (HOST=########)
          (PORT=1527)
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER_001.ORA
    Filename......: listener.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = PRD1.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PRD1)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = @@@@-@@@@)
              (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    nmiconf.log
    DBSNMP for 32-bit Windows: release 9.2.0.7.0 - Production on 22-SEP-08 11:33:50
    Discovering services on @@@@-@@@@ configured on host addresses {@@@@-@@@@.@@@@.COM 192.168.10.5 @@@@-@@@@}
    Warning : Skipping OracleOraHome92TNSListenerFsl@@@@-sap-orav : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerLISTENER2 : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerprd1 : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerprd1.world : Could not find corresponding listener definition in
    Warning : LISTENER1 defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
    Warning : LISTENER defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
    Warning : No Listener found for SID PRD1. PRD1 will be skipped
    Could not determine location of emtab.
    Regards,
    Shiva

    Dear All,
    I am facing a series of problems.
    We are using ecc5 on windows with oracle 9i.
    Two nodes on cluster.
    1. I am getting error in log file 
    TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
    2. dev_disp getting error *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3893]
    MtxInit: -2 0 0
    3. Suddenly shutdown of server.
    4.E error in nmiconf.log
    I am unable to find the Listener problem because at present it listener is up.
    Please help to find the root cause because there 3 Listener.ora
    1     LISTENER1.log current date.
          2     LISTENER. Log with old date
    And which file and what change I have to do.
    2.What settings have to change in DNS settings?
    3.What is suddenly caused of server shutdown?
    Log file of LISTENER2.log
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener2.log
    Trace information written to E:\oracle\ora92\network\trace\listener2.trc
    Trace level is currently 0
    Started with pid=1332
    TNS-01151: Missing listener name, LISTENER2, in LISTENER.ORA
    Log file of LISTENER1.log
    Started with pid=1180
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 22-SEP-2008 11:33:50
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener1.log
    Trace information written to E:\oracle\ora92\network\trace\listener1.trc
    Trace level is currently 0
    Started with pid=1304
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1528)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    Log file of LISTENER. log
    TNSLSNR for 64-bit Windows: Version 9.2.0.7.0 - Production on 11-AUG-2008 17:10:07
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    System parameter file is E:\oracle\ora92\network\admin\listener.ora
    Log messages written to E:\oracle\ora92\network\log\listener.log
    Trace information written to E:\oracle\ora92\network\trace\listener.trc
    Trace level is currently 0
    Started with pid=7440
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=@@@@-@@@@.@@@@.COM)(PORT=1527)))
    TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
    11AUG-2008 17:10:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=#####1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11-AUG-2008 17:59:26 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11AUG-2008 18:14:17 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    11-AUG-2008 18:17:35 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=prd1adm))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153093888)) * status * 0
    LISTENER.ORA
    LISTENER.ORA Network Configuration File: E:\oracle\ora92\network\admin\listener.ora
    Generated by Oracle configuration tools.
    STARTUP_WAIT_TIME_FSL@@@@-SAP-ORAV = 0
    LISTENER1 =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1528))
    ADMIN_RESTRICTIONS_FSL@@@@-SAP-ORAV = on
    FSL@@@@-SAP-ORAV =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1))
        (ADDRESS = (PROTOCOL = IPC)(KEY = PRD1.WORLD))
        (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(Host = #####)(Port = 1527))
    This file is written by Oracle Services For MSCS
    on Tue May 16 21:20:04 2005
    TRACE_LEVEL_FSL@@@@-SAP-ORAV = OFF
    CONNECT_TIMEOUT_LISTENER = 10
    STARTUP_WAIT_TIME_LISTENER = 0
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = @@@@-@@@@)(PORT = 1527))
    SID_LIST_FSL@@@@-SAP-ORAV =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    LISTENER_000.ORA
    This file is written by Oracle Services For MSCS
    on Tue May 16 21:20:02 2005
    LISTENER =
      (ADDRESS_LIST=
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=PRD1.WORLD)
        (ADDRESS=
          (PROTOCOL=IPC)
          (KEY=PRD1)
        (ADDRESS=
          (COMMUNITY=SAP.WORLD)
          (PROTOCOL=TCP)
          (HOST=########)
          (PORT=1527)
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER_001.ORA
    Filename......: listener.ora
    Created.......: created by SAP AG, R/3 Rel. >= 6.10
    Name..........:
    Date..........:
    @(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = PRD1.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = PRD1)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = @@@@-@@@@)
              (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SDU = 32768)
          (SID_NAME = PRD1)
          (ORACLE_HOME = E:\oracle\ora92)
    nmiconf.log
    DBSNMP for 32-bit Windows: release 9.2.0.7.0 - Production on 22-SEP-08 11:33:50
    Discovering services on @@@@-@@@@ configured on host addresses {@@@@-@@@@.@@@@.COM 192.168.10.5 @@@@-@@@@}
    Warning : Skipping OracleOraHome92TNSListenerFsl@@@@-sap-orav : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerLISTENER2 : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerprd1 : Could not find corresponding listener definition in
    Warning : Skipping OracleOraHome92TNSListenerprd1.world : Could not find corresponding listener definition in
    Warning : LISTENER1 defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
    Warning : LISTENER defined in E:\oracle\ora92\network\admin\listener.ora will be skipped, because it does not monitor any of the valid SIDs
    Warning : No Listener found for SID PRD1. PRD1 will be skipped
    Could not determine location of emtab.
    Regards,
    Shiva

  • DEFAULT_WS_DEST web service destination - problem with production server

    Hi All,
    I'm getting close to go live for a project which uses a vast number of custom web services to access an Oracle DB backend to supply data to a Portal front end.  Many of the applications we have developed are based on Web Dynpro and so we have used adaptive web service models to call the web services.  My basis guy and I sat down and configured the DEFAULT_WS_DEST logical web service destination to work correctly in both our DEV and QA systems.
    We completed the production build but when testing the Web Dynpro applications I get a dump saying '"DEFAULT_WS_DEST/default" cannot be found'.
    Does anyone know why our production system is looking for a connection called "DEFAULT_WS_DEST/default" instead of just "DEFAULT_WS_DEST" as per our DEV and QA system?
    Thanks in advance.

    Ok, I was really hoping for some response at least!  Guess no-one has had this problem before?
    Here's the exception message:-
    Caused by: java.rmi.RemoteException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.NameNotFoundException A configuration with the path
    "webservices/proxies/sap.com/DynamicWSProxies/DEFAULT_WS_DEST/default" does not exist.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].;
    nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class
    com.sap.engine.frame.core.configuration.NameNotFoundException A configuration with the path "webservices/proxies/sap.com/DynamicWSProxies/DEFAULT_WS_DEST/default" does not exist.
    If anyone has any suggestions at all I'd be very grateful.  As mentioned, the DEFAULT_WS_DEST configuration does exist and it works perfectly in both DEV and QA but not PROD.
    Thanks,
    Gareth.

  • SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
    in the production server.....
    while testing the jco maintained for Ess applications.
    if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
    if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
    I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
    while maintainig that ping is successfull but getting the above error.
    it is the problem with production server.......of E.P
    in dev and quality everything is working fine.
    plz help me out.
    thankyou
    swapna

    Hi Swapna,
    Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
    Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
    Hope it will helps
    Regards, Arun Jaiswal

  • Problem using "UPLOAD FILE" behavior, in localhost Works fine, in my production server doesnt

    Hi
    I have been working with a form that uses a "upload file", in my localhost computer works very well BUT in my production server doesnt, the thing is that there is no error messager .. so i cant guess the problem, i already check permissions in my folder that contains the files and all is with Write permissions.
    Can you help me pleasE??
    thanks in advance

    Most likely a permissions issue. Check your production server to see if both the IUSR_[Machine Name] and ASPNET users have read/write/delete permissions on 1. the folder you'll be uploading images to AND 2. the includes\common\lib\file_upload\temp folder (if this doesn't exist, create it manually).
    These settings are necessary in order for the ADDT file upload server behavior to function properly.

  • Problem with cheque printing in production Server Tcode - FBZ5

    Hi
    Cheque Printing using SAPScript with TCODE FBZ5.
    I had a problem with cheque printing in production Server. TCODE - FBZ5
    It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
    Could you please let me know, where the problem is occuring.
    The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
    Sekhar

    Hi,
    For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

  • Getting font problem for printing form in Production server.

    Hi experts,
                   We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
                  Can any one suggest me on this issue.
    Regards,
    Sagun Desai.

    Hi sagun,
    Please check the spool request generated on production server using tcode SP01.
    Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
    The printer connected to the test server  might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
    Hope this helps.
    Regards,
    Subodh

  • Problems with assembly update in Biztalk production server

    Hi.
    I'm facing a problem I cannot solve about an update in one of the resources of an application in Biztalk production server.
    Suddenly a bug in an application that receives messages through an external web service appeared. To find out where the bug was occurring, the orchestration was filled with many EventLogs and some other things to test. After the bug was tracked and corrected,
    it was added an update in resource with the original code of orchestration, that way the EventLogs were no more logged in Event Viewer and the other things wouldn't exists in production.
    Occurrs that the EventLogs are still being logged in Event Viewer. Even after the resource was added many times in server and after many resets in the host instances.
    The problem aren't the logged events, are the other things that we must remove from production to avoid headaches.
    There is a way to fix this? Or some better way to search a resolution for that?
    I'm thinking remove the resource, reset the hosts instances, then add the resource and reset again, but for me this is very hardcore, even more in the production Server.
    Usually, the deployment in production Server is made based in the import of msi files and execution of this files. The "Add -> Biztalk Assemblies" method was used this time only because was an emergency. I don't know if makes sense.
    Thank you for reading, please if you have any answer or material to solve this, reply this question. If you don't understand something because of the English I'm very sorry, I'm still learning the language (and yes I use Google Translate).

    Rafael,
    Enabling the options for GAC as you did, should GAC the components.
    BizTalk uses
    C:\Windows\assembly folder for assemblies. So when you import the msi with GACing options enables, ensure the assemblies are gaced in C:\Windows\assembly folder.
    Otherwise, just drag and drop the assemblies from your folder to this folder. Or using command prompt
    cd to c:\windows\assembly\gac_msil and copy the assembly from your folder.
    Ensure you have GACed the assemblies in all the BizTalk processing machines when you more than one BizTalk machines.
    Also ensure you’re restarting the correct host instances. If the artefact under the isolated host instance, ensure Application pool /IIS is restarted.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Backup Problem with only Production Server

    Hi all
    Here i have backup problem in only production server. In my tape drive device all schedule backup of Development  server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
    And any hardware issue or OS issue is responsible for this.
    Please help me out.
    Thanks
    Keyur

    Hi,
    Can u pls post us the backup log? Also let us know ur product details like OS, SAP, DB version and also the backup tool(if any).
    Regards,
    Varadharajan M

  • Backup not problem in only production server

    Hi all
    Here i have backup problem in only production server. In my tape drive device all schedule backup of Development  server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
    And any hardware issue or OS issue is responsible for this.
    Please help me out.
    Thanks
    Keyur

    got answer

Maybe you are looking for

  • Satellite A660 wont start again until i turn to safe mode

    Just purchase toshiba Satellite A660: i tell the story to compensate closely to my answer, hopefully .. I just purchase it new, run the insallation program for first use. When its up and running just within that day i noticed that it start to hang up

  • "Adobe Premiere Pro CC has stopped working" message

    I have the latest version of Adobe Creative Cloud. Today when I opened my programs, I am getting a message that tells me that it has stopped working correctly and that Windows will close the program and notify me if I solution is available. I really

  • About a dropped archived log.

    Hello every body. I have this big problem: An archived log of my standby was dropped, so I restored that archived log at primary database and didn´t go to standby database. I copied it to standby and I was try to register it manual: SQL: alter databa

  • Workspace and web analysis

    hi friends, i want to view the cube which i have developed in hyperion 9 in web analysis.i tried to install it. but the bi+services is not starting properly.i was able to open the workspace web page but while giving username and password it says to s

  • Oracle e-BS certification

    Hi everybody What are the tests required to become certified Apps DBA in R12? And is it mandatory to have Instructor-led training from Oracle University or Oracle certified partner to get get those tests? Thanks alot