Mexico VAT tax configuration

Hi All,
I have some queation about how to configure the Mexico VAT tax in SAP system.
As I understanding, If my company which located inside of Mexico purchases material from vendor in Mexico, the payment to vendor will include cost of material and VAT tax (VAT input), and the VAT tax rate is depend on my company location.
When my company sale product to customer, the customer will be charged the cost of product sold and VAT tax (VAT output), and the VAT tax rate is depend on location of the customer. So the VAT tax that my company need pay to the Mexican Government is (VAT output - VAT input). In other word, the VAT input amount is calculated after system generated payment to the Vendor, and VAT output amount is calculated after system generate payment from the customer.
How can I configure the system to use this kind of Cash-base method for VAT tax payment?
Thanks for your time
Alvin

Tax Code
Definition
See Tax Codes [Extern].
Use
When you create a company code using the template for Mexico, the system sets sample tax
codes as follows:
Input VAT
Tax code Tax rate (%)
V0 0
V1 10
V2 15
Output VAT
Tax code Tax rate (%)
A0 0
A1 10
A2 15
Excise Duty + VAT
Tax code Tax rate (excise duty + VAT) (%)
S1 30 + 15
S2 30 + 10
Additionaly you need to check SAP note 487616.
Miroslav

Similar Messages

  • Mexico VAT increased 15% to 16% from 01/01/2010

    Hi Experts,
    Mexico VAT is increased from 15% to 16% valid from 01/01/2010. One of the many companies like mine retain some VAT while posting the invoice i.e. 2/3 (Retencion IVA) of VAT. So before it was very easy to configure the tax code  to calculate 2/3 of 15% which is 10%.
    But now 2/3 of 16% is 10.6667%. And in tax code you cannot enter more than 3 decimal points whereas you need 4 to get exact invoice amount in SAP to match with real invoice.
    If anyone found the solution please share.
    Regards,
    Simar

    Hi Padmaja,
    Additionally the following Link:
    Adding tax depreciation to depreation area
    In RAFABNEW you have the indicator  Leave values initial 
    If you do not set this indicator, the system copies 1:1 the values from the reference depreciation area.
    Set this indicator if you want to open the newly created depreciation area without values (blank).
    regards Bernhard

  • VAT Tax determination- question about "Requirement" for Table-Is mandatory?

    Hi everybody,
    I am having problems to determine the appropriate VAT tax percent in some cases in Mexico.
    In Mexico for billing at the border with other countries the VAT tax percent is 11% and for billing inside the country the VAT tax percent is 16%. For determine the VAT tax percent the sequence access is MWST and is assigned to the condition type MWST.  For cover the border cases we create a table 989 with the fields: Distribution Channel/Plant and VK11 is fill out with this information. With these parameters is possible to determine successfully the VAT percent of 11% at border sales point.
    The problem that I have is related to the u201Crequirementu201D assigned to the table 989: Distribution Channel/Plant. This table has assigned a standard requirement number 7- Domestic Business and when billing to a customer with address of MX (Mexico) as LAND1 at general data section of customer master data, the VAT tax percent of 11% is obtained successfully, because all the fields of the table are filled. But when billing to a customer with address of US ( United States of America) as LAND1 at general data section of customer master data, is not possible to obtain the correct VAT tax percent of 11% even all the fields of the table are filled.
    I do not know if the problem is the requirement number 7- Domestic Business, but if I change for the requirement 8- Export Business then the opposite is occurring. For US customers the VAT tax percent is determinate successfully and for MX customers not, because the fields of the u201Crequirement u201Care not filled.  
    So, I am wondering if:
    1.     Would be necessary to create a new requirement for combine the 7- Domestic Business and 8- Export Business requirements or exist one like this? I do not need to conditioning anything
    2.     What happen if I left in blank the requirement field, I mean if I do not assign anything. I was doing testing for both customers and the VAT tax percent was determined correctly. But I do not know if is correct do not assign a u201Crequirementu201D to the table of the sequence of access MWST.
    Thank you in advance for your help!

    OK I think I understand but here is where I am at now. I originally created a regulation that requires a license when shipping to certain countries out of the EU. I set the regulation as an Export reg did all the necessary config and was able to assign licenses automatically where needed.
    Has I was testing the solution I could not find sales docs or deliveries for some of the materials and finally found out they are being moved on NB PO's.
    So I changed the reg to include imports etc., classified with import control class etc. but I am seeing a couple things that don't make sense and tells me my config isn't quite right.
    I finally do see that the system at least recognizes the new legal reg in the screening now. before this it had not. But it is still telling me it can't find any relevant country.
    The other thing the document itself only shows under Display Existing Export Documents even though in the log it says it's an import document and when I go to the Import log there is no data.
    Before I realized there was a note to change the Import to export on transfer I assigned the PO types to export orders and I am thinking that's why they are showing in the export list but I woul have tought that it would say it's an export doc which it doesn't.
    Any ideas?

  • VAT tax rate question --invoices

    Hello, I am working to configure NL VAT tax for the Netherlands. I have applied the EBTax Configuration Library and completed additional required setups. For Payables, the standard tax rate is being applied to each invoice upon creation. Per business requirements, the tax rate is situational or should be optional, (sometimes Reduced rate, or Exempt rate applies or both). Looking to eliminate default tax rate, having all available for a single transaction. I need a more manual entry approach, providing the user the ability to apply taxes as they are applicable. If anyone is working toward similiar goal input would be appreciated.
    Thanks. Amanda.

    I have figured it out that there were was extra record with Active_flag = 'N'
    Cheers

  • China - Custom Tax, VAT Tax Handling

    Hi SAP friends
    I have the problem of Import custom tax and VAT tax for puchasing.
    It is Domestic Sales scenario. Need to purchase material from oversea vendor.
    Oversea vendor sell mateiral to China company RMB 100 per PC.
    Mainland company needs to pay custom for custom tax 20% and the custom tax is non-deductible. Custom tax is 100*(20%) = RMB 20.
    Then, Mainland company needs to pay China government VAT tax(17%),
    VAT tax is 100(1+custom tax)(VAT tax)-100 = 100(1.2)(1.17) - 100 = 40.4
    So, VAT tax amount = Material price * custom tax * VAT tax
    In PO, I use ZOA1 custom condition type to input Cutom tax amount for Custom tax and input Tax code for VAT tax.
    When good receipt, RMB 120 post to Material stock account. RMB 100 post to GR/IR. RMB20 post to custom account
    It still be fine.
    When do LIV, RMB 100 clear GR/IR. RMB 17 post to VAT tax account becasue it use RMB 100 as base amount to calculate VAT tax. RMB117 post to AP vendor account.
    Actually, mainland company only pays RMB100 to oversea vendor and the Tax amount should be include Custom amount. Corrrect VAT tax amount is 100(1.2)(1.17) - 100 = 40.4 (use RMB120 as base amount to calculate VAT tax), but not only RMB 17 . But, in LIV payment to vendor now is RMB120. It is not fulfill the requirement of mainland company.
    Do anyone have experience about China Import purchasing material. And, would share how to settle the payment of vendor and how to make use (Material price + Custom tax amount) as base amount to calculate VAT tax amount?
    Thanks a lot for your help!
    Mag

    It may helpful hint before going to configure.....abt the tax codes..
    Value Added Tax (VAT) was implemented in China in 1984. Initially, the tax was levied on 24 specified
    items. The need for constructing a socialist market economy system in China resulted in the proclamation
    of 'The Provisional Regulation of the People's Republic of China on Value Added Tax' on January 1, 1994.
    Value Added Tax in China is one of the important sources of fiscal revenues for the government,
    especially the central government. The implementation of VAT is done by the State Administration of
    Taxation while the customs collects the import VAT.
    ..******note this point it may helpful*********
    The revenue earned from VAT is divided between the central (75%) and local government (25%).
    The list of VAT taxable items and the rates in China can be understood from the following:
    Coverage of Collection
    Rate
    Exportation of goods
    Edible vegetable and grain duplicates
    Agriculture, forestry, aquatic products, products of animal husbandry
    Book, magazines, newspapers
    Tap water, cooling, heating, hot air supplying, gas, hot water, natural gas, liquefied petroleum gas,
    coal/charcoal products for household use
    Selected non-metal mineral products, Selected metal mineral products, coal
    Chemical fertilizers, feeds, agricultural machinery, agricultural chemicals, plastic converting film for
    farming 13%
    Crude oil, mine salt and other goods and services not listed above
    17%
    VAT in China is payable by individuals as well as enterprises who are associated with selling
    merchandise, providing services related to processing, repairing and assembling and import of goods.
    VAT Taxpayers in China are categorized into two sections, normal taxpayer and small taxpayer, depending
    on the turnover of the goods and services on sale and the accounting system condition.
    The amount of VAT payable by the normal taxpayer can be calculated by the following:
    Output tax payable for the current period u2013 Input tax payable for the current period = Tax payable
    The amount of VAT payable by the small taxpayer is as follows:
    Sales amount x Applicable rate = Tax payable
    (The applicable rate is 4% for commercial sectors and 6% for others)
    Certain items and services are exempted from VAT. These include the following:
    u2022  Instruments and equipment imported for direct use in scientific research, experiment and education
    u2022  the agricultural production materials as ruled, the self-produced primary agricultural products sold by
    Agricultural producing units and individuals
    u2022  Imported materials and equipment granted, gifted by foreign governments or international organizations
    u2022  Contraceptive medicines and devices
    u2022  Articles imported directly by organizations for the disabled for exclusive use by the disabled
    u2022  Materials imported directly to support the poverty relief and charity cause donated freely by overseas
    natural persons, legal persons and other organizations
    u2022  The taxable services provided by individual disabled laborers
    u2022  Antique books purchased from the public
    Certain reforms have been implemented in particular areas of China in 2004 with regard to the VAT.
    chk the website http://www.cabc.org.cn/news/2006-1-19/2006119145600.html

  • IDOC INVOIC02 tax configuration

    Hi All
    We're going to use INVOIC02 IDoc to trigger FI vendor invoices. It involves some configuration settings along with Tax configuration. But, functional people they says functionally it's not possible to maintain all the tax codes in configuration level.
    So, please help me to avoid config for Tax for INVIOC02 IDoc.
    Thanks in advance
    Senth.

    Hi ,
    1)We got same senario.You have to inform functional guys to configure the VAT codes in  the EDI subsystems for all countrys.
    2) Other wise you have to write BDC to update the EDI config.
    Thanks.

  • Is it possible to add VAT (TAX) in the order form and discount codes ?

    Is it possible to add VAT (TAX) in the order form and discount codes ?

    would it be possible to do a caculation field then ? if I create a number field and add some kind of caculation rule, i've noticed that other form websites do this.

  • Tax Configuration in Vendor Master

    HI
    What are all the steps to be followed in order to establish tax criteria in Vendor master i.e the fields that want to be inputted for Tax configuration .
    Any one please explain me in detail
    Thanks & Regards,
    senthil.

    when i maintain it is throwing error message :
    Entry USER   does not exist in USR02 - check your entry
    Message no. 00058
    Diagnosis
    Input values must be defined in Table USR02. The value or values 'USER ' are not specified in this table.
    Procedure
    Check whether the input is correct and correct if necessary.
    Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change them if necessary.
    If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
    please help me to solve this issue
    Thanks & Regards,
    senthil.

  • The payment method for me is it vat/tax included or without vat/tax .

    Hy you bypass to answer my question ! I ask you a simple question that " I am a non-Malaysian person & within a few day I will go to Malaysia for official purpose & I want to by a MacBook air Malaysia so what's the payment method for me is it vat/tax included or without vat/tax . I have no need to know how I use my credit card from you . Please answer my simple question .
    Best regards

    This has happened to me, did you fix it ?? If so how ???

  • VAT Tax report S_ALR_87012357

    Hi SAP Guru's
    I am running Report S_ALR_87012357 for VAT Tax report, but the report is displaying the Tax base amount twice on the report. I have observed that, if there is more then one tax code used in the document level (exp: V0, V1) then its displaying the tax base amount repeating the line items, once with the amount and once with the amount and tax value.
    please guide me whats wrong with the report or there any issue in document level.
    Thanks,
    Anand

    Hi
    Suggest you to ask the help of the ABAPER & Debug the report  S_ALR_87012357
    Please also check field HWBAS(Tax Base Amount in Local Currency)  in Table BSET  (Tax Data Document Segment)
    Regards
    Praveen P C
    Edited by: Praveen Chirakkel on Apr 20, 2011 6:13 AM

  • Service tax configuration

    HI
    How to configuration service tax in the arline industry.Because in the arline no any excise duty is there.when i m trying to run the service tax report this i have geeting the error depot is not maintain. i know in excixe group plant is not assign.
    how can slove this problme. Tell me the service tax configuration.Because i need to submit report in the service tax department.
    i m new in the airline industry
    Thanks

    Hello,
    I donot Know exactly the Airline industry buiness , but SAP has recently released the below given Notes for Service tax configuration.
    For Service tax determination SAP has released 6 Notes.Implement these below given Notes and try for Service tax .
    1353362 Service tax Master Note.
    1391485 Outbound Excise Invoice enhancement for service tax.
    1393506 Service tax enhancement for ARE reversal process.
    1392593 Service Tax enhancement in monthly Utilization.
    1393534 Service Category determination and service tax return (STS).
    1393460 Updation of GAR7 Challan information.
    Service Tax reporting needs to be done based on service category in section 3 of ST3 report.
    And the congiuration  Zip doc  folder is available in above given Note.
    Regards,
    Mahesh Naik.

  • Query to get the Excise amount and basic amount based on the cst or vat tax

    Dear all,
                       I need a right query to get the basic amount ,excise amount and the tax amount based on the CST or VAT tax rate.The output should be like this,
    VAT
    goods excisabe at 1% - taxable amt(basic+excise for vat 1%)            tax amt
    goods excisable at 4%-   txable amt                                                       tax amt
    CST
    goods excisabe at 1% - taxable amt(basic+excise for CST 1%)            tax amt
    My problem will also be solved..if i am able to get  the basic value from base table OPCH itself............Since am using the PCH1 table to get the total basic amt...the values are duplicating.
    Regards,
    Shyam

    Hi Sowjanya,
    If you're simply trying to place a grand total, use the 'Insert Summary' option.
    Choose the measure field as the 'Field to Summarize' > Choose 'Sum' as the summary operation > Under 'Summary Location' choose 'Grand Total Report Footer'.
    -Abhilash

  • Requirement for getting the VAT Taxes automatically from the vendor invoice

    Dear All,
    We Have a Requirement for getting the VAT Taxes automatically from the vendor invoice in to the Sales invoice after invoice verification process.Is this feasible?. Can anybody explain how this can be done to overcome this issue.
    Thanking you,
    Best regards,
    R.Srinivasan

    hi,
    technically i do not think tht can be done. but even from functional part its incorrect in the sense tht the values on which tax is calculated in purchase may be very different from tht in sales. so we may never get the correct picture.
    saurabh

  • Withodling Tax Configuration for Vendor

    Hello SAP FICO Consultant,
    Anyone has with holding tax configuration for vendor plz send me
    Regards
    Manisha

    Hello,
    There are no special settings for vendor. You have to assign the with holding tax code to vendor in the master data of vendor.
    You have to create the with holding tax code in IMG menu.
    You have to do following settings such as
    Basic settings
    Maintain countries
    Define document types
    Calculation
    Maintain tax code
    Maintain Formula
    Postings
    Define accounts for tax code
    Hope it will solve your problem
    Regards,
    Ravi

  • Defining CST Tax, Vat Tax

    Hi all,
    I am defined CST Tax, Vat Tax in SD-Log-Taxes.( Cust Tax Classification, Mat Tax Classification). Accouting point of view i want to show the entry to my client.  i have taken key combination Cust, Reg Del Plant, State, Tax Clas Cust, Tax Clas Material.   how i can proceed further  in the same time FI people integration also required. pls help me complete picture in this regard.
    from FI , SD point of view (The result is how the accounting entries should happend regarding Taxes)
    Pls help me in this regard.
    Thanking You,
    Meera.

    Dear,
    For Tax Procedure follow following path,
    SPROFinancial AccountingFinancial accounting global setting Tax on Sale and Purchagecheck Calculation Procedure
    (click)--Define procedure(Double click) and select your Tax Procedure and add these two condition as we did it in Pricing procedure also create and assign Account Key.
    Then use Tcode: FTXP -- press enter-- put IN in country field-- name Tax code in TWO Digit-- enter and fill the detail in appear
    boxgive the percentage against Condition type as desiredclick on TAX ACCOUNT ans assign the relevent G.L. Account.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

Maybe you are looking for

  • Upgrading Oracle Order Management from R12.1.1 to R12.1.3

    Hi Forum, Currently we are on Oracle R12.1.1 and we have a requirement to upgrade only the OM section of Oracle EBS (Order Management module) to R12.1.3. In order to do this what are the patches that we need to apply? Any specific Oracle Support note

  • How to reinstall after hard drive crash

    My hard disk crashed. How do I reinstall Creative Suite 3? I have no install disk.

  • Dynamic variant type B

    How i use the selection variable type B in dynamic variant?? I have 2 parameters: month and year. Both have been filled with currenth month and year in background job that will be run every day. In sap help, is mentioned something about memory ID for

  • Error msg when downloading

    I've tried several times to download the newest version of iTunes and I keep getting the message "The feature you are trying to use is on a network resource that is unavailable". I removed the past version of iTunes that I had. When I got to my contr

  • Installation audit vault agent with RAC configuration

    Hi at all, I have a question about the installation of the agent on the RAC configuration. Where must I install the Audit vault agent, on all RAC nodes or is there a properly configuration? Thanks Vincenzo