MFP 1217nfw How to Change Network Name and Password When You Buy a New Routers

I have an MFP 1217nfw. It was working fine wirelessly. Then my router stopped working properly. I bought a new router and easily set up my computers, iPad and iPhones to work with it. But I don't know how to change the printer set up so that it will see and connect to the new router (i.e., change the network name and password that the printer uses to connect). Anyone know how to do this without having to uninstall and reinstall the printer as if it were fresh out of the box? Thanks for your help.
This question was solved.
View Solution.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How to change administrator name and password?

I have macbook pro laptop which my father bought in china. App Store ask for a administrator name and password when i install anysoftware or updates.
Please help me how to solve this problem.

It would appear that your User Account is not an administrative account.
Can you log out, and see what other accounts are availalbe to chose from?

How to change Owner name and password?

I want to give my iPad to another person.
How do I change name and password?

What to do if you sell or give away iPad
http://support.apple.com/kb/HT5661

How to pass user name and password in openConnection method ?

Hi, Exports,
          I am trying to post data from applet to another application which is
          protected by network password.
          How to pass user name and password when I use openConnection method? In java
          doc, this method looks like do not accept these two parameters.
          Thanks
          ----- my code in applet ---------
          URL url = new URL("http://127.0.0.1/xml/index.cfm");
          URLConnection connection = url.openConnection();
          connection.setDoInput(true);
          connection.setDoOutput(true);
          connection.setUseCaches(false);
          connection.setAllowUserInteraction(false);
          DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
          dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
          dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
          dos.writeBytes("Content-Type:
          multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
          dos.writeBytes("Host: "+host+":"+port+"\r\n");
          dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
          dos.writeBytes("Connection: Keep-Alive\r\n\n");
          dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
          on: form-data;name=\"xmlDoc\"\r\n\r\n");
          dos.writeBytes(buff.toString());
          dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
          dos.close();


you need to negotiate Authentication in ur applet code...
          For example:
          If u r using Form based auth u need to send Post a request with j_user_name &
          j_password to the action j_security_check. and when server returns back the
          cookie
          u need to hold it and pass that cookie to the each and every request made to the
          protected application.
          Basically u need to imitate the browser.
          regards
          aseem
          David wrote:
          > Hi, Exports,
          >
          > I am trying to post data from applet to another application which is
          > protected by network password.
          > How to pass user name and password when I use openConnection method? In java
          > doc, this method looks like do not accept these two parameters.
          >
          > Thanks
          >
          > ----- my code in applet ---------
          > URL url = new URL("http://127.0.0.1/xml/index.cfm");
          > URLConnection connection = url.openConnection();
          > connection.setDoInput(true);
          > connection.setDoOutput(true);
          > connection.setUseCaches(false);
          > connection.setAllowUserInteraction(false);
          > DataOutputStream dos = new DataOutputStream(connection.getOutputStream());
          > dos.writeBytes("POST " + path + " HTTP/1.0\r\n");
          > dos.writeBytes("Referer: http://127.0.0.1/XML/index.cfm\r\n");
          > dos.writeBytes("Content-Type:
          > multipart/form-data;boundary=---------------------------7d0b414b04\r\n");
          > dos.writeBytes("Host: "+host+":"+port+"\r\n");
          > dos.writeBytes("Content-Length:" + buff.length()+"\r\n");
          > dos.writeBytes("Connection: Keep-Alive\r\n\n");
          > dos.writeBytes("-----------------------------7d0b414b04\r\nContent-Dispositi
          > on: form-data;name=\"xmlDoc\"\r\n\r\n");
          > dos.writeBytes(buff.toString());
          > dos.writeBytes("\r\n-----------------------------7d0b414b04--\r\n");
          > dos.close();
          >
          > ------------------------------------------

How to suffix user name and password remote pc in shutdown /s command

Hi,
We can shutdown a remote pc using " shutdown /s /m \\ipaddress " command, only if password of remote pc is stored in windows credential manager.
But how to add user name and password when i execute the command for example : when we map a share folder on our pc we use below command with user name and password
"net use * \\ipaddress\share password /user:username "
can we give user name and password of remote pc while we give shutdown command to turn off a remote pc (without adding user name and password to windows credentials).
Thanks in advance..........

Hello Jayanth kundar,
Based on my test, I can use the command shutdown /s /m \\10.157.21.77 to shutdown the remote computer when the have the same username and password.
Do you mean that you want to add user name and password when you want to shutdown the remote computer?
I can't find a user name and password in Windows Credential Manager, please share us a screenshot.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password. I have an HP laptop

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password? I have an HP laptop.

Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
If this occurs, your only option is re-configure the device again, just as you did originally.
In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

I changed my Airport Extreme network name and password, now I can't access my Airport Express speakers. Help please.

I changed the network name and password associated with my Airport Extreme and now my system is not recognizing my Airport Express speakers.
Can someone help me get my speakers and sound system back online?
Thanks in advance for any assistance.

You will need to think in reverse here.
Change the network name and password back to where it was on the AirPort Extreme and get things working that way.
Then, change the name and password on one AirPort Express, then the second. Both Expresses will be blinking amber at this time. Power them off.
Now, change the name and password on the AirPort Extreme.
Power up both Expresses and they will now join the AirPort Extreme network correctly since you have programmed them with the new network name and password.

How do i change the administrator name and password when i forgot both of them

how do i change the administrator name and password when i forgot both of them?

Find the user name and then reset the password.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Note down the user account name.
Enter a new password.
Reenter the new password for the user.
Note it down.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

How do I change admin name and password on install for PS 7.0 for Mac

I have an old 7.0 full photoshop disc from a business that closed a couple of years ago. When I try and install it asks for a administrator name and password. The person who used to work for the company and install the programs on our computers is no longer around. Is there I way I can bypass this or change the name and password so I can install Photoshop on my new Mac laptop? Thank you.

Change the password with your OS X install disk. See
here for details.
J

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

I need to change user name and password on my macbook pro

I need to change user name and password on my Macbook Pro OS version 10.6.8. As I purchased it used and can't remember what user name and password the original owner gave me. I need to install printer drivers and can't until I can sign in.

Reset the computer to the factory condition.
Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

How to validate user name and password in webdynpro.

Dear All,
Actually i have created login name and password in view, webdynpro and want to validate the user name and password but i am not finding proper code to how to validate user name and password.
Pl do the needful help.
Regards.
Tazeer.
Moderator Message: There is a seperate forum for WebDynpro. Please ask your question there.
Edited by: kishan P on Oct 5, 2010 1:08 PM

Hello, I don´t get you question. User authentication is ready out of the box in webdypro...
Regards Otto

MFP 1217nfw How to Change Network Name and Password When You Buy a New Routers

Similar Messages

Maybe you are looking for