MG7520 Printing Multiple Copies

I'm having this odd issue where my brand new MG7520 is printing multiple copies of a document, despite my only requesting one copy.  It doesn't always seemt to do it, printing from Adobe Reader is fine, I get just one copy, but printing a webpage will just result in many copies of the same thing until I cancel the job.  Seems very odd, any idea why this might be happening.  Appreciate any insight anyone might have.

Essentially the printer is a passive device and it really only does what it is told to do. Probably a wonky network issue, but could also be settings you inadvertantly changed (like how many copies you want printed).
Do you have a USB cable? You can try to install it via USB then print to see whether it's the computer sending weird commands or if it's the network.

Similar Messages

  • I am unable to print multiple copies on 1 page

    I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

    Hi,
    In order to print multiple documents on one page, you may follow the steps mentioned below:-
    Press Command+p- Select multiple pages or booklet
    If you are not getting these options, please send us a screenshot to better understand the issue.
    Regards,
    Nakul

  • Printing multiple copies of 3 page BOL in Duplex mode-

    Hi Gurus!
    I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
    At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then  again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
    Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
    Please suggest.

    Hi!
    Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
    My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
    Please suggest as to what to do next to make it print in proper sets.
    Thanks and Regards
    Aarav

  • Print Multiple copies of report, and resetting Page number for each copy.

    Dear frnds!
    i am using developer 6i reports i have a problem.
    i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
    1 - for user copy
    2- gate copy
    3- accounts office
    4- office copy
    any body please tell me the solution "i am using oracle 9i and developer 6i"
    Thanx
    Ibrar

    Hi,
    I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
    <?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
    HEADER
    PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
    PSN Detail: <?$G1/PickSlipNumber_ID260?>
    Page 1 of 3
    <?start:body?>
    BODY
    <?$G1/LineNumber_ID6?>
    <?end body?>
    FOOTER
    <?end for-each?>
    <?end for-each-group?>
    XML:
    <R5542520>
    <Pick_Slips_Detail_Lines_S24>
    <Header_Custom_Section_S24>
    <Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
    <PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

  • Printing Multiple Copies of Same Image on Multiple Pages

    I have Photoshop Elements 11 on a Windows 8 platform.  I can NOT get it to print multiple copies of the same file on multiple pages.  I need one file printed on one page multiple times.  I have tried the CTRL-ALT-SHIFT and nothing changes.  It still just prints one and is done.
    I use this for label printing, so I need it to print more than one copy at a time.  It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements.  This just is not going to work when you need to print a few hundred copies at a time.

    You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
    Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

  • How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

    How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

    Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy &amp; paste.

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • How to print multiple copies on one page ?

    How to print multiple copies of one document on one page ?
    in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
    how do I make the same operation in Indesign.
    thanks

    Hi, Peter S.
    >I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
    * It's just an alternative to copy/paste and step/repeat.
    * For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
    Regards,
    Peter Gold
    KnowHow ProServices

  • How to print multiple copies of same image (with specific fixed dimensions) on single page

    I am using Photoshop Elements 10 on Win 7 PC.  I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images.  When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected.  Neither is acceptable.  How can I repeat the same image on a single piece of paper without having the system re-size the image?  I know that I can manually create a new PSE file and manually insert the images into this file.  This is what I have been doing as a work-around.   But I would hope there is a better/faster way.
    Thank-you!

    A variation of hatstead's method where the pictures are precisely aligned:
    1. Add the picture to the blank file as hatstead described. Use the Move tool to position the picture in the upper left corner.
    2. Duplicate the layer. Use the arrow keys (NOT the mouse) to move the new layer to the right.
    3. Repeat step 2 until the row is filled:
    4. Merge Down the 3 layers into one. Alternatively, link the 3 layers and do a Merge Linked as in this example. The end result is the pictures in the row are on one layer:
    5. Duplicate the layer and use the arrow keys to move this down to the 2nd row.
    6. Repeat step 5 to create additional rows.
    7. Finally, to center the whole thing on the sheet, link all the row layers and position with the arrow keys.
    Note that you can also custom-make your own Picture Package. Instructions for this should be somewhere in Help.

  • How do I print multiple copies of the same photo on one page or a contact sheet. The directions in help don't work

    I want to print multiple copies of the same photo on a page. The directions in help don't work
    Help

    What version of iPhoto?
    The general process is to select the photo and print, select the printer, paper size and print size and click customize and under settings selec multiples copies of a photo (the preview will reflect this choice) and click print to print, make any printer specific selections and click print to print
    LN

  • Can I print multiple copies of the same picture on iphoto 9.5

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade. Can anyone see how to do this now?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

    Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all  worked  well with the PCL6 driver and that is the only driver that was used
     They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
    The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
    I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
    The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
    The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
    The pcl 5 driver prints one page and then stops printing, no errors.
    When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
    I have not tried the PS driver with the mopier disabled.
    The PCL6 driver stills returns the pcl xl error with the mopier disabled.
    The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
    Anybody else have a similar issue and got theirs fixed?
    Thanks in advance.

    Hi jnickelsen,
    I understand the printer won't print multiple copies.
    Thank you for your reply.
    I will be happy to help you with this.
    This printer doesn't have the Mopier settings.
    What drivers are you using?
    Did you download the drivers or are you using the Windows preinstalled drivers?
    If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
    I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
    Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet 1022nw printing multiple copies

    HELP!  Ever since I purchased my new laptop with Windows 7, my LaserJet has been going crazy.  I reinstalled new drivers and used the HP diagnostic tool and it says "all is working correctly".  However, when I print a document of any size (even if just one page), the printer keeps re-printing multiple copies until the paper runs out or I turn the printer off.  I have un-installed and reinstalled several times and the same issue keeps happening.  I posted on the forum and one other person related that he had the same issue, but to this date neither of us have been able to correct it.  I love my laser jet when it works, but have resorted to using my hp photosmart 7960 instead (higher cost of ink!).  And this sucks because sometimes I have 50-100 page documents that I need to print.  Laser is so much faster.  Thanks in advance for the expert advice I know you are going to give me and the solution that I KNOW that you must have. 
    Stephanie Iseri

    Hi, try unchecking the Enable bidirectional support found in the 1022nw Printer properties/Ports.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Problem with 4250dtn printing multiple copies Windows 7 64 bit

    We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons.  Windows 7 32-bit ones work fine.  The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver;  could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

    Thanks very much for the feedback. I was getting worried!
    The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
    As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
    Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
    Any other suggestions are most welcome!!
    Thanks again!
    -gary

  • Officejet Pro 8600 will not print multiple copies

    When I first set up my HP Officejet Pro 8600 I could print multiple copies.  Not sure when, how, or why but I can no longer print more than one copy of any document at a time regardless if it is one page or 100 pages.   I tried to update the drivers but the update failed as it said it could not uninstall the printer. When I did the error reporting it said there was no solution.
    My OS is Window XP Home
    The printer is connected via network.
    I print mainly from MS Word 2010 and Adobe PDF files and I have the same issue from either program.
    This question was solved.
    View Solution.

    Since the drivers and software refuses to update automatically, force it to. Uninstall all of the printer software and install it back using a fresh download. That will ensure that you have the latest driver and software for the printer installed and eliminate the need for updates for a while. I'll link them below. If that doesn't fix the problem with multiple documents not printing, try using an alternate driver for the printer. I'll link those instructions below. Let me know what happens.
    HP Officejet Pro Full Feature Software and Driver
    How to Assign Alternate Print Drivers in Different Versions of Windows
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Problem on a table with hierarchy prompt

    Hi experts, I have an unusual error when I'm using hierarchy prompt. I make an analysis that it has two hierarchycal columns (One of this is to show on rows of my table, another is to get filter when I choose options with hierarchycal dashboard promp

  • InvocationTargetException in weblogic portal 10.3

    Hi, I have installed the weblogic portal10.3 on solaris. When i am trying to start the admin server its giving the below error message : <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008 Web

  • Passing T into a method

    I did these methods twice, and I'd like to change the signature to something like: private void removeAllArticles(<T>) Is that possible, and, what's the terminology? public class DatabaseOps {     private EntityManagerFactory factory = Persistence.cr

  • Size of the Canvas, how do you change it

    I would like to change the size of the canvas? How do you do this? I have looked everywhere? thanks

  • How do I reset Master Password?

    A few years ago I set a master password.  I know the master password but would like to change it. I've read a few articles and it says to do this via System Preferences/Security/File Vault; however, when I get to File Vault, the master password info/