Microphone jack not working with IOS 7

Hi, I don't know where to report to, I've been using IOS on my iPhone 4 and iPad 3 since yesterday and looks pretty great but I noticed that the microphone jack is not working to speak with siri or even answering to a call, please let me know if you find any solution.

I tried this and it worked. I thought it was ios7 but I may have dropped the phone around the same time....
www.youtube.com/watch?v=0jhWxYTVxe4
Feb 25, 2012 - Uploaded by Rolando Desrets
Is your iPhone 4 not working when you make or receive a call?

Similar Messages

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

  • PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2

    Well this is upsetting. I created a PDF form with several pages of the same form (it's a travel log).
    My hoping to use Adobe Reader to complete the form and save back as a week at a time won't work.
    I created the form using Acrobat Pro 9 from CS5.
    Does anyone know if a PDF form in a Portfolio should work with Adobe Reader on the iPad2/
    Also, what can I use that works with forms as a portfolio?
    Ken

    Ken,
    please could you describe your workflow. It might help to find some solution. Also it would be great if you can share a sample of your document. Please email it to [email protected] with the reference to this discussion "PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2"
    thank you.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • My Microphone is not working with skype

    my microphone is not working with skype but it is woring with other call manger perfactly please assist me in this regard

    Did you ever find out why your mic didnt work?  I notice no one on this board offered any help.
     The skype recording says to check your settings,I notice my mi was set to "mute" but when I turned it on it still didnt work.

  • Email settings DO NOT WORK WITH iOS Devices

    Vz keeps sending these "important" instructions for email port settings, BUT they do not work with iOS devices--iPhones and iPads. Last go around with this I spent over 16 hours trying to reconcile until an Apple Expert discovered "special" instructions for iOS device settings. Get with the program, Verizon.

    So what are the special instructions?

  • Sd photo import camera kit not working with iOS 8

    I bought an Apple brand sd card photo import camera kit for the iPhone 5 (lightning cable) a couple years ago. It no longer works with iOS 8.x. I now have an iPhone 6 Plus and it still does not work. I get the error "This accessory is not supported by this iPhone." Since it is Apple brand it should work.
    I have googled and searched the forums and found no leads on this. I was hoping with the latest 8.3 release it would be addressed. Does anyone know how to get this to work or is it an apple bug?

    One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
    http://support.apple.com/kb/HT4106
    @ rotorcraft:
    It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
    You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

  • MICROPHONE IS NOT WORKING WITH WINDOWS 8

    HI,RECENTLY IAM UPGRADED MY LAPTOP HP G60 WINDOWS VISTA TO WINDOWS 8.FROM THAT,INTERNAL AND EXTERNAL MICROPHONE IS NOT WORKING..IS IT I NEED ANY DRIVER SOFTWARE?ANYBODY HAVE SOLUTION FOR THIS ISSE?

    Hello elshadica,
    HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011.  Most Windows 7 drivers will work in Windows 8.
    Check out this page to see if your computer has been tested by HP with Windows 8.
    You can run the Upgrade assistant software, which will scan your PC and generate a report on what is currently installed on your PC is compatible with Windows 8.  This upgrade guide for Windows 8 provides a lot of information that is needed for anyone considering upgrading.
    I hope this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Why is my iMessage and FaceTime not working with ios 7?

    I just updated my iphone 5 to ios 7 and it's not letting me use FaceTime or iMessage. It's saying it's still activating. I'm afraid if I reset I will lose everything, but is there any other way to fix it?

    Hi there,
    both services send a silent SMS (one that is not listed anywhere on your device) containing a configuration request to an Apple server. This server then responds with the needed configuration details. It can take some (from a few minutes to several hours) time for this answer to come. Also if for whatever reason text send/receive is not working properly, iOS can get stuck on the "waiting for activation" message.
    Hope this helps,
    Chris

  • Sound Blaster X-Fi I/O - Windows 7 RC - Microphone jack not working

    Hey all,
    I've recently installed the Windows 7 RC and am running the Beta drivers on it. I have a weird problem with it where the Microphone jack is being recognised as line-in, but all of the controls for the actual line are in the microphone properties. For instance, I can enable the +20dB boost, which will affect the sound coming through line-in, but it still won't recognise the actual Microphone.
    Any ideas why this is? Previous behaviour in Vista was that the Microphone jack was recognised as one and I could control the recording settings from there...

    Sorry fffcmad,
    Everything you said in your post does not apply to the Titanium.
    The mic shares the line-in on a channel called FlexiJack. There is a tab in the "Settings" window in which you can switch between the two. You can find that window by opening the "Game Mode" window and click "Settings" on the bottom of that window. However, the problem is that mic detection is very unstable and you have to have luck to get it to work. The next step is to select the "Microphone" channel by clicking the arrow above the right-most fader in the "Game Mode" window. However, for some odd reason that option often fails to popup there. Often you'll find "Microphone FP" (note the "FP" in the name and it stands for "Front Panel") which is only available in the version with the front panel! The FlexiJack one is called "Microphone" (with the "FP" in the name). Rebooting might help, but often it doesn't. Changing input devices and changing them back might work, but often it doesn't.
    Also, the Titanium has no mic boost. That is a real problem, because the mic volume is extremely low.
    The short answer: The Titanium's drivers are unstable.

  • Y410p Front headphone and microphone jacks not working after repair

    I recently (last month) sent  my IdeaPad Y410p in to Lenovo for repairs due to the laptop not turning on, or repeatedly restarting at the BIOS screen. The laptop was repaired by Lenovo (they replaced the motherboard), and returned it to me. The laptop has worked great sincce then, except that the two USB ports on the right side and the headphone and microphone jacks do not work. I have reinstalled the audio drivers, twice, but have not reinstalled the chipset drivers at all, as I don't want to screw around with those untiol I no more about what I should do. Any help would be appreciated.

    Hi Talonek, welcome to the forums,
    the problem you are experiencing is probably due to the cable connecting the ports on the right side, front of system, to the mainboard unfortunately not being connected or connected properly.  Please see pdf page 52 of the system's Hardware Maintenance Manual.
    I've never taken an Y410p apart, but having looked at the manual the cable connection may well be accessible to check / fix by removing the hard drive.  Another alternative would be to call service and ask them to do this for you.

  • T520 3,5 mm microphone jack not working

    I'm trying to use an external hardware playback source connected to the 3,5 mm microphone jack.
    How does one activate/select this jack for recording/playback?

    I too have been a bit puzzled as to whether the 3.5mm jack on the side was a 3 connector or 4 connector (TRRS) type plug.   When I plugged by Nokia 920 TRRS plug into here could not record any audio (was just using the MIC built into the laptop).
    What I found is that if you go to CONTROL PANEL->SMARTAUDIO you get a window like this with 4 options along the bottom left of the window...
    In this case im on the speaker/headset icon (3rd along). When set to CLASSIC setting the following appears to be the method of operation...
    - 3.5mm jack only works for audio out. The two builtin MICs in the screen record audio. If no audio connection made via 3.5mm jack uses builtin speakers. No external MIC operation possible via 3.5mm jack.
    When set to MULTISTREAM the operation changes to...
    - A headset can be plugged in and it is possible to control whether the audio comes out builtin speakers or headset via right-clicking the SPEAKER icon at bottom right normally and selecting PLAYBACK DEVICES. Two options for me SPEAKERS (inbuilt) or HEADPHONES (3.5mm jack)....
    - A mic can now be used in the 3.5mm jack. This can be selected from the SPEAKER icon by right-clicking and selecting RECORDING DEVICES. Now get two options (EXTERNAL MIC and INTERNAL MIC)...
    and viola can now record using MIC on 3.5mm jack.
    Took me 1 year after getting T520 to figure this out. Fundamentally the 3.5mm jack is TRRS (4 connector) so can do stereo earpieces and MIC + usual ground connection. I realised this when I looked at the 3.5mm jack using a torch and it appeared to be a 4 connector type.
    I imagine the DOCKING MIC is when it is in a docking bay in which case they probably have a dedicated (red) MIC in and a separate (GREEN) audio out.
    Geoffrey.

  • Iphone 4 not working with iOS 6, Iphone 4 not working with iOS 6

    iOS 6 is not working on my iPhone 4. When the update/restore finishes it gives me the (-1) error and cannot finish the update. Please help.

    Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
    Anyways after about 18h of search and stress I came across this link:
    http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
    That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
    Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
    When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
    Well hope that will work for you like it did for me

  • Playing Slowmotion video over airplay does not work with ios update!!!!!

    after upgrading last ios , airplay to shoot slowmotion video does not work.
    I was expecting it to be fixed with recent update, but still not working!!!
    I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
    or apple should give downgrade option at least.
    FIx it, fix it, fix it!
    Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i  am quite disappointed with my purchsing ipad air 2.

    As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
    It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

  • Bluetooth not working with IOS 7 and apple tv Ver3

    I have a ver 3 Apple TV MD199X/A and an Iphone running IOS7. I saw recently that there is an option with IOS 7 to bluetooth sync with Apple TV. Neither my Iphone 4S or Apple TV is recognisiing each other in bluetooth mode. My iphone bluetooth is working fine with my car and is always on.
    What is the Problem?

    This fits with the observable results, however it does seem a little odd. The apple engineers coud have at least written the software to say something like, " I see an Iphone, but I can't do anything with it." Currently, it seem to behave like there is a problem with bluetooth connectivity. Not that the bluetooth is working fine, it just has nothing it can do with the two devices.
    What you are trying to say has no sens. Check Apple TV manual and informations what bluetooth on this device is for and what options is giving to you before blaiming engineers for not making something straight.
    Apple Tv 3rd (and 2nd) generation doesn't have a built-in storage and is more as a streaming device not syncing device. I suggest you read about Apple TV 3rd gen features and functionalyty and also about home sharing, airplay and airplay mirroring, apple remote app.
    Also, check this information here: http://support.apple.com/kb/SP648
    Wireless
    Wi-Fi (802.11a/b/g/n)
    Bluetooth support for Apple Wireless Keyboard (requires Apple TV software version 5.2 or later)

Maybe you are looking for