Microphone not working with XtremeGamer ca

To start, I've used the search function on many different phrases and what-not... while there are some partially-similar cases, nothing matches my situation enough for it to be of any help.
Basically, I installed the card, everything went smoothly, and all my output is excellent. However, when trying to use my microphone (which is a headset, connected to a Speaker/Headset switch, and then to the sound card), I get no signs of it picking up my voice at all. Before when I was using onboard sound (which wasn't AC97, it was Intel/Realtek HD), it worked fine, but with the same settings, my mic no longer functions. I've played with the system sound panels (which are now overtaken by Creative), and in the Creative software alone. I've made sure that my line-out is in the green, and my mic is in the FlexiJack, yet nothing I do seems to change anything.
I'm not sure if I'm missing something, or if there is a common fix to X-Fi XtremeGamer mic issues, but if there is, do tell! For the record, I'm not using the Fatalty version, just the normal one. Also, should you need screenshots, tell me of what, and I shall gladly provide.

Try switching the card to another PCI slot. There was some sort of IRQ conflict that was causing mine not to work. Switched slots and it worked perfectly.

Similar Messages

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • USB webcam microphone not working with Starcraft 2 voice chat

    =USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
    I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
    in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
    I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
    Any thoughts on this or am I SOL and have to find myself a shiny new headset?

    I had the same problem. You need to check the device index of your USB mic.
    In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
    Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
    Remember, that the indexing is 0 based.
    The sound framework make the assumption that the index is 0.
    Hope that helps.

  • Shure Earphones (SE115m+) Microphone Not Working with OS X 10.6.6

    Since I upgraded my MacBook Pro to OS X 10.6.6 the microphone on my Shure Earphones no longer works, or is even detected in the Sound preferences. (Worked flawlessly with OS X 10.5.x). Kind of surprising since they sell them at the Apple store specifically for their compatibility.
    Shure Customer support insists it's Apple's problem:
    "Sorry, we have not encountered this problem before. There is no firmware or software in the SE115m+, so the change in performance has to be on the Apple side.
    Here is complete technical data on the "M+" product. Supply it to Apple and ask for their comments.
    Answer Title: SE115M+ Basic Features and Operation
    Answer Link: http://shure.custhelp.com/app/answers/detail/a_id/3852"
    Also note that the volume control on these earphones does not work with the iPhone 3G.
    Anyone know of any solutions?

    Try resetting the PRAM.
    Info here:
    http://docs.info.apple.com/article.html?artnum=2238

  • Microphone not working with speakerphone

    I recently purchased a iPhone 4 which is pre-owned.  I soon discovered that the microphone is not working when ever I'm using speakerphone. 
    The microphone works fine otherwise and I can hear the call fine when in speakerphone mode.  The problem is only with the microphone not working while in speakerphone mode.  Based on some initial Google searches, I can see this is a relatively common issue on iPhones (4 & 4s models) but have not seen a way to resolve.  Please help me resolve.

    This may be relevant. I've been getting warnings "Device storage almost full" recently - even though I have an SD card that is almost empty. I suppose the device doesn't know to automatically use that for any downloaded/photos, etc.
    In any case, I made some room, but is it possible that "core" stuff may have been overwritten (obviously some kind of s/w bug if so). How likely would this scenario be? I realize that anything is possible, including a meteor strike - but I was curious whether this is something that is "realitiscally" likely with the current BB OS.
    Also, if I back up my data, do an OS reload, and then restore my data - is there a chance that the problem might come back? (given that the data I will back up now will have "more space" than when the warnings started coming, since I deleted some stuff).
    Thanks again.

  • Internal microphone not working with Windows 7 Enterprise on dx6650

    Hi. I recently upgraded my HP Pavilion dx6650 to Windows 7 Enterprise (final version, non beta). Everything worked fine but the internal microphone that is not working.Thank you in advance. 

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Microphone not working with Skype

    Hi,
    I've just got a new Intel Core Duo Mac mini and want to run the latest edition of skype. Everything works except the microphone. I tested it using Skype's echo123 which allows you to leave a message for 10 seconds and then plays back with silence. Hmmm.
    I have not tried or installed any other programs and I can see in the settings that the microphone should be used. Its not my microphone because it works on my Windows laptop.
    Anyone had any luck?
    Intel Core Duo Mac Mini   Mac OS X (10.4.5)   1.66Ghz 512Mb 80GbHD

    Hello,
    Macintosh computers require an "Amplified" microphone.
    These are rare items in your local stores which cater to the PC majority.
    An amplified Microphone will have a battery in it (like a AAA or AA battery).
    PC's have a separate Microphone and Audio Input line.
    Mac's just have an Audio Input line.
    With an Audio Input line, you must have a "Line-Level" audio signal. This is the level of audio typically sent through a Stereo component's CD-Player or Tape Deck (such as when connecting an external CD-Player to a component stereo with RCA cables). This would be the audio level present on the RCA cables.
    If you are using a Microphone which is not amplified, then you need a pre-amplifier to sit between the Microphone and your audio input line.
    Given the cost and additional wiring mess of a pre-amplifier, it is generally better to just purchase an amplified microphone. They are available if you look.
    I used to sell them back when I had a computer business, I think I sold them around $15 to $20 compared to $5 or $10 for an unamplified microphone.
    The reason that you can use your other microphone with a PC is that the PC amplifies it's Microphone port.
    If you are handy with electronics, here's a document on how to build your own pre-amp circuit:
    http://www.epanorama.net/circuits/micamp.html
    If you are not up to the task of building a pre-amp for your microphone, then I would either purchase an Amplified Microphone (with a battery), or buy a pre-amplifier (usually around $50 to $70 for a low-end pre-amp).
    Keep in mind that not all so-called "Amplified Microphones" are really self-powered and pre-amplified. Make sure it has it's own battery if there is any chance it is going to be able to work with your Mac. It needs to amplify it's own signal prior to sending it to the Macintosh for it to work for you.
    One external solution around $120 is this simple and compact pre-amp:
    http://www.microphones.com/microphonegroup.cfm?URLID=Preamp-Series
    I've used other solutions that were only around $60, but they take-up my whole desk. So, I guess there is a price for convenience.
    A self-powered microphone would be the most elegant solution though.
    Here's a cheap ($50) solution for a self-powered microphone:
    http://www.jr.com/JRProductPage.process?Product=24501
    There are also headphone-mounted solutions available as well.
    There are also some USB solutions that people have been using for Mac's without Audio-in ports.
    The USB solutions are essentially a Microphone port that plugs into your USB port. They are reportedly pretty good. But, some people have reported a delay in their recordings (particularly with music recording). So, that may or may not be an option for you.
    One USB solution is:
    http://www.griffintechnology.com/products/imic2/
    I hope you find this information helpful.

  • Dv6648se microphone not working with windows 7

    The hard drive died on my laptop this week so I got a new one installed, plus Windows 7.  Now my microphone does not work.   The mic is my lifeline to keep in touch with my family while I'm overseas.  Any suggestions will be greatly appreciated.  Hurry...I'm running out of wine.

    this is a KNOWN problem with the HP G60 series. Yours is a different model, but from what I ma seeing in this forum - I am beginning to wonder if the sound problenms aren't more widespread.
    Go look at this  thread in this forum: HP G60-535DX Windows 7 Home Premium Internal Microphone Inaudible

  • Microphone not working with speaker phone

    Hi Guys
    My Normal Microphone is working fine on normal calls but when using speaker phone nobody can hear me. Also when using APPS like Fring or Viber
    Microphone doesnt work have to use headset.
    Very annoying Please help
    Please Help!!!!!!
    Norman

    I recently bought an iphone 4s from bangkok. I am a resident of new delhi. I was sold the phone by telling that its a product of international one year warranty so need not to worry.
    As i started using the phone, I have realised that the microphone of the phone doesnt work. I keep on speaking but noone can listen to me on the other side. I tried headphone and it was fine. I tried speaker phone with mic on top and it was fine.
    I called apple to find out that this is a replaced handset which has been replaced by Apple.
    After all the ifs and buts, It was agreed with them that it is still a product of Apple and is under one year warranty. They have agreed for replacement but only if I can take this phone to a apple store in Korea or Australia. Which is highly impossible for me.
    I wonder what to do. Whether to speak with apple again to see if they can provide replacement in New Delhi itself, or ask a local technical expert to repair it for me.?
    Kindly advice what should I do to get my mic working fine.
    Sandeep Agarwal
    [email protected]

  • Audigy 4 - microphone not working with Ventr

    Hello,?I have a brand-new SB Audigy 4. Pretty much everything works all right; I use headphones and I can hear everything just fine. However, I use a voice-chatting program called Ventrilo, and for some reason my friends cannot hear me speaking into my mic while I'm using that program. All of the Ventrilo settings are correct (confirmed working with another sound card). ?When I go to Sound and Audio Devices on the control panel, and go to the Voice tab, and click on the "Test Hardware" button, my mic will then work for literally about one minute (i.e. my friends can hear me via the program again). After that, they can no longer hear me because my mic has stopped working again. I have eliminated all other program factors, have updated my drivers, etc., and nothing works. I see that there are other people who have posted on this board with the same problem and have gotten basically no helpful answers. I have tried all of the solutions suggested to them as well, such as disabling my onboard audio, checking my BIOS for IRQ conflicts, doing a clean boot, reinstalling my drivers, and nothing worked for me. Here is a SS of my audio mixer in case someone needs to see it. http://www.theglasswolf.com/audiomixer.jpg? Note, the S/PDF-in and Auxiliary controls are unmuted right now because I was trying EVERYTHING to fix this issue. They normally would be?X-ed out. Is there anything that can be done, or is there some kind of permanent, unfixable conflict with Ventrilo/Teamspeak and the Audigy 4?

    Hey guys,
    I do have the same problem and it makes me realy mad. I own the Audigy 2 ZS, what is a cool (verry expensi've soundcard in my country) soundcard and it doesnt work with Team speak. I do need it pretty much for Counter strike play.
    Mic is ok, its on and pluged correctly. WIN XP does not even detect my mic in the hw check. Team speak work for a few minutes when I use Creative Restere Defaults, but afer I switch to the aplication (game) I want to use it for, Mic stop to work and I can only hear others.
    Pleeeeees Ill apriciate any sugestions.
    icq: 340-884-642

  • Why do my Apple Earpod Microphones not work with Windows 7?

    My laptop has 3 ports (Microphone, and 2 headphone ports), and I've got a VERY bad external mic, that I might be giving to someone else, because I have Earpods. The only thing is, the Earpods don't have a microphone cable as well as a headphone cable, and the Earpod microphone doesn't work with Windows 7! Can anyone give me the drivers for it or something? I really love the quality of these headphones and it also means I don't have to lean towards my microphone (my desk won't allow me to move the mic any closer to me). Any help is greatly appreciated.

    Have you tried a hard reset of your iPad by holding down the Home button and sleep button together until your iPad goes black and the Apple logo reappears, then let the buttons go?

  • Microphone not working with specific model settings in ALSA

    Hi,
    I have a Asus UX51VZH Zenbook.
    To get my subwoofer to work, I have to set the following arguments inside of "alsa-base.conf"
    options snd-hda-intel model=asus-mode4
    and the subwoofer works great. However, when doing so, I cannot get my internal microphone to work no matter what settings I choose in alsamixer or pavucontrol.
    I have "mic", "internal mic", "capture" and "internal mic 1" in alsamixer and sound doesnt get recorded no matter how I set things up.
    BUT, it works flawless when choosing the default alsa settings, e.g.
    model=auto
    instead of the specific asus setting, but then my subwoofer wont work.
    Any ideas?
    I have tested with both Skype and arecord.

    alsa setup?
    you might want to read the alsa-user lists archives, they answer this kind of questions.

  • Speaker Working but microphone not working with VT1708/A Azalia HDAC

    Hi,
    I freshly installed 64-bit Arch on my Desktop.
    2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:28:29 CET 2010 x86_64 AMD Athlon(tm) 64 Processor 3500+ AuthenticAMD GNU/Linux
    I configured alsa as said in
    http://wiki.archlinux.org/index.php/Adv … chitecture
    I can get sound through the speakers but i cannot use my mic.
    I tried to record using audacity and it did not work. Also it does not work in skype.
    Could Some one please help me trouble shoot this problem?
    Thanks
    Siju
    These are my Configurations.
    Alsa Packages installed
    $ pacman -Q |grep alsa
    alsa-lib 1.0.22-1
    alsa-oss 1.0.17-1
    alsa-utils 1.0.22-2
    lib32-alsa-lib 1.0.22-1
    Driver Module Names
    $ ls -l /sys/module/snd/holders
    total 0
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_codec -> ../../snd_hda_codec
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_codec_analog -> ../../snd_hda_codec_analog
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hda_intel -> ../../snd_hda_intel
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_hwdep -> ../../snd_hwdep
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_mixer_oss -> ../../snd_mixer_oss
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_pcm -> ../../snd_pcm
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_pcm_oss -> ../../snd_pcm_oss
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq -> ../../snd_seq
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq_device -> ../../snd_seq_device
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_seq_oss -> ../../snd_seq_oss
    lrwxrwxrwx 1 root root 0 Jan 20 04:25 snd_timer -> ../../snd_timer
    Modprobe Configuration
    $ cat /etc/modprobe.d/modprobe.conf
    # /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
    options snd-hda-intel index=0
    In /etc/rc.conf
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(fuse snd-hda-intel)
    Sound modules loaded.
    $ lsmod|grep '^snd' | column -t
    snd_hda_codec_analog 69995 1
    snd_seq_dummy 1439 0
    snd_seq_oss 29023 0
    snd_seq_midi_event 5316 1 snd_seq_oss
    snd_hda_intel 21586 0
    snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec 63659 2 snd_hda_codec_analog,snd_hda_intel
    snd_pcm_oss 39011 0
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 70318 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_mixer_oss 17299 1 snd_pcm_oss
    snd_timer 18799 2 snd_seq,snd_pcm
    snd 57408 11 snd_hda_codec_analog,snd_seq_oss,snd_hda_intel,snd_seq,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
    snd_page_alloc 7033 2 snd_hda_intel,snd_pcm
    Contents of /dev/snd
    $ lsmod|grep '^snd' | column -t
    snd_hda_codec_analog 69995 1
    snd_seq_dummy 1439 0
    snd_seq_oss 29023 0
    snd_seq_midi_event 5316 1 snd_seq_oss
    snd_hda_intel 21586 0
    snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_hda_codec 63659 2 snd_hda_codec_analog,snd_hda_intel
    snd_pcm_oss 39011 0
    snd_hwdep 6340 1 snd_hda_codec
    snd_pcm 70318 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_mixer_oss 17299 1 snd_pcm_oss
    snd_timer 18799 2 snd_seq,snd_pcm
    snd 57408 11 snd_hda_codec_analog,snd_seq_oss,snd_hda_intel,snd_seq,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
    snd_page_alloc 7033 2 snd_hda_intel,snd_pcm
    All channels are unmuted
    $ amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [0.00dB] [on]
    Front Right: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [on]
    Front Right: Playback 31 [100%] [12.00dB] [on]
    Simple mixer control 'Front',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [0.00dB] [on]
    Front Right: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'Surround',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [0.00dB] [on]
    Front Right: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'Center',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'LFE',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [0.00dB] [on]
    Simple mixer control 'Line',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Mono
    Limits: Playback 0 - 31
    Mono: Capture [off]
    Front Left: Playback 31 [100%] [12.00dB] [on]
    Front Right: Playback 31 [100%] [12.00dB] [on]
    Simple mixer control 'CD',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Mono
    Limits: Playback 0 - 31
    Mono: Capture [off]
    Front Left: Playback 31 [100%] [12.00dB] [on]
    Front Right: Playback 31 [100%] [12.00dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Mono
    Limits: Playback 0 - 31
    Mono: Capture [on]
    Front Left: Playback 31 [100%] [12.00dB] [on]
    Front Right: Playback 31 [100%] [12.00dB] [on]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 0 [0%]
    Front Right: 0 [0%]
    Simple mixer control 'Phone',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'IEC958 Default PCM',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 15
    Mono: Playback 15 [100%] [0.00dB] [off]
    Simple mixer control 'Aux',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Mono
    Limits: Playback 0 - 31
    Mono: Capture [off]
    Front Left: Playback 0 [0%] [-34.50dB] [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off]
    Simple mixer control 'Mono',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Mono
    Limits: Playback 0 - 31
    Mono: Capture [off]
    Front Left: Playback 0 [0%] [-46.50dB] [off]
    Front Right: Playback 0 [0%] [-46.50dB] [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 0 [0%] [0.00dB] [off]
    Front Right: Capture 0 [0%] [0.00dB] [off]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 60 [50%] [0.00dB]
    Front Right: Capture 60 [50%] [0.00dB]
    Simple mixer control 'Stereo Downmix',0
    Capabilities: pswitch penum
    Playback channels: Front Left - Front Right
    Mono:
    Front Left: Playback [off]
    Front Right: Playback [off]
    Groups the user is a part of
    $ cat /etc/group |grep sgeorge
    wheel:x:10:root,sgeorge
    video:x:91:sgeorge
    audio:x:92:sgeorge
    optical:x:93:hal,sgeorge
    storage:x:95:hal,sgeorge
    lspci
    $ lspci
    00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
    00:00.6 Host bridge: VIA Technologies, Inc. Device 6290
    00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
    00:0f.0 RAID bus controller: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
    00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
    00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90)
    00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
    00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
    00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
    00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
    00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
    04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller)

    Same problem here...
    2.6.32-ARCH #1 SMP PREEMPT Fri Jan 29 08:50:05 UTC 2010 i686 Genuine Intel(R) CPU T2080 @ 1.73GHz GenuineIntel GNU/Linux
    Module Size Used by
    aes_i586 6880 1
    aes_generic 25834 1 aes_i586
    ipv6 237532 12
    arc4 1058 2
    ecb 1545 2
    b43 154501 0
    mac80211 149018 1 b43
    cfg80211 106663 2 b43,mac80211
    snd_seq_dummy 1099 0
    snd_seq_oss 25304 0
    snd_hda_codec_idt 43564 1
    snd_seq_midi_event 4452 1 snd_seq_oss
    snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 33693 0
    snd_mixer_oss 14810 1 snd_pcm_oss
    joydev 7768 0
    i915 264228 2
    drm_kms_helper 21971 1 i915
    snd_hda_intel 18793 3
    snd_hda_codec 56728 2 snd_hda_codec_idt,snd_hda_intel
    snd_hwdep 5102 1 snd_hda_codec
    b44 24073 0
    sdhci_pci 4910 0
    firewire_ohci 20266 0
    drm 126588 3 i915,drm_kms_helper
    i2c_algo_bit 4219 1 i915
    sdhci 13921 1 sdhci_pci
    snd_pcm 57479 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    firewire_core 37529 1 firewire_ohci
    ssb 39958 2 b43,b44
    iTCO_wdt 7577 0
    mmc_core 45164 3 b43,sdhci,ssb
    pcmcia 27513 2 b43,ssb
    crc_itu_t 1041 1 firewire_core
    mii 3218 1 b44
    led_class 1933 2 b43,sdhci
    iTCO_vendor_support 1453 1 iTCO_wdt
    snd_timer 16117 2 snd_seq,snd_pcm
    video 14871 1 i915
    i2c_i801 7122 0
    output 1404 1 video
    psmouse 56309 0
    thermal 9326 0
    battery 7328 0
    uhci_hcd 19124 0
    dell_laptop 1745 0
    pcmcia_core 25643 3 b43,ssb,pcmcia
    ac 2255 0
    wmi 4083 0
    processor 25790 2
    snd 43847 17 snd_seq_oss,snd_hda_codec_idt,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 5007 1 snd
    i2c_core 15369 4 i915,drm,i2c_algo_bit,i2c_i801
    button 3638 1 i915
    ehci_hcd 31594 0
    rfkill 12320 2 cfg80211,dell_laptop
    snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
    sg 21079 0
    intel_agp 23225 1
    agpgart 23331 2 drm,intel_agp
    serio_raw 3620 0
    usbcore 118921 3 uhci_hcd,ehci_hcd
    dcdbas 4408 1 dell_laptop
    evdev 6970 14
    vboxdrv 135347 0
    rtc_cmos 7504 0
    rtc_core 12011 1 rtc_cmos
    rtc_lib 1450 1 rtc_core
    ext3 113026 2
    jbd 38906 1 ext3
    mbcache 4278 1 ext3
    sr_mod 13161 0
    cdrom 31625 1 sr_mod
    sd_mod 24101 4
    pata_acpi 2264 0
    ata_piix 17725 3
    ata_generic 2235 0
    libata 135162 3 pata_acpi,ata_piix,ata_generic
    scsi_mod 78933 4 sg,sr_mod,sd_mod,libata
    MODULES=(!pcspkr vboxdrv)
    no changes on config files except rc.conf
    Has anyone filed a bug yet?

  • Internal microphone not working with Windows 7 on g6-1256ee

    Hi,  I recently installed Windows 7 (64bit) on my HP g6-1256ee and everything seems to work apart from the internal microphones.
    sound card driver install correctly and hp assisstant say your computer up yo date
    plz help me

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Internal microphone not working with Windows 7 RC on dv9000 (Dv9817cl)

    Hi,  I recently installed Windows 7 RC (64bit) on my HP dv9000 (DV9817cl) and everything seems to work apart from the internal microphones.
    In the Sounds section of the hardware and sound section of control panel there is only one recording device shown "Microphone, High definition audio device, not plugged in".  I take it this is the 3.5mm microphone port on the front of the notebook.  There is only one driver issue showing in device manager for "Other devices>coprocessor".
    The current audio driver is High Definition Audio Device microsoft v6.1.7100.0.  I've tried looking for updated drivers ion the web with no luck so far.
    Does anyone know where I could get an updated driver or have any suggestions to get this going?
    Thanks in advance
    Message Edited by Hamer7513 on 07-25-2009 02:25 AM
    This question was solved.
    View Solution.

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for

  • Network drives showing repeating copies of directory content

    I'm experiencing a weird issue with mapped network drives under Windows 7. Sometimes it will list the contents of a directory normally, others it will list hundreds of copies of the contents, and sometimes it will keep listing them over and over with

  • More info re tv shows & new iPad

    The iPad I bought has OS version 6.0.1.

  • Migrating to PSE10 & moving default storage locations

    Greetings all, I have purchased the upgrade from PSE9 to PSE10 and am planning to migrate the default location of my images and catalog from a local drive on my Windows 7 PC to a NAS device. I am wanting to move the default location to a NAS so that

  • Bex reporting Flag

    Hi, I am planning to uncheck the Bex reporting flag in a ODS. So to transport the change do I need to transport any thing else or just the ods? Thanks,

  • Facing Error when BPEL Process is invoked through java code

    Hi, I wrote a BPEL process (HelloWorld) and deployed it on BPEL Process Server and running fine,even tested from console,it's working fine,but I am trying to invoke this process with java code from Jdeveloper10g.When this file is being run ,it's thro