Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.
microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.
Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.
Similar Messages
-
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
i have done update my IOS, but is not activate yet... i have had try so many time but always fail..i dunno what method supposed i do..please help me to solve this prob. tq
You can't if your iPhone was hacked/jailbroken to unlock.
-
Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol). -
Please help me to solve this date comparision issue..
Please help me to solve this issue..
If i have some data like the following..
ID START DATE END DATE
1 20080101 20080501
1 20080502 20080630
2 20080631 20080801
2 20080802 20080901
---------------> There is a break in date over here
2 20080930 20081029
2 20081030 20081130
I need to compare the End Date with the start date (These data will not be in order)
and find out if there is any break and should get the output date : *20080930*
I am trying to do this in SQL or PL/SQL.Please help me .
Thanks in advance.
phaniHi Frank ,
Sorry to bug you again. I ran your code on my actual data but not gettting the expected output.Here i am posting the actual code and the output that i got when i ran your code.Please bear with me and help me to solve this..
/* Formatted on 5/25/2009 2:27:24 PM (QP5 v5.115.810.9015) */
SELECT member_nbr,
aff_nbr,
ymdeff,
ymdend,
gap_before,
COUNT (gap_after)
OVER (PARTITION BY member_nbr, aff_nbr ORDER BY ymdend DESC)
AS gap_cnt
FROM (SELECT member_nbr,
aff_nbr,
ymdeff,
ymdend,
CASE
WHEN ymdeff >
LEAD(ymdend)
OVER (PARTITION BY member_nbr, aff_nbr
ORDER BY ymdend DESC)
+ 1
THEN
1
END
AS gap_before,
CASE
WHEN ymdend <
LAG(ymdeff)
OVER (PARTITION BY member_nbr, aff_nbr
ORDER BY ymdend DESC)
- 1
THEN
1
END
AS gap_after
------------I need this SQL to filter the whole data to the data that i posted in previous post -----
FROM ( SELECT ms1.member_nbr,
ms1.aff_nbr,
ms1.ymdeff,
ms1.ymdend,
ms1.void
FROM (SELECT ms.member_nbr,
ms.aff_nbr,
ms.ymdeff,
ms.ymdend,
ms.void
FROM MEMBER mb, member_span ms
WHERE mb.member_nbr = ms.member_nbr
AND (20090523 BETWEEN ms.ymdeff
AND ms.ymdend
AND TRIM (void) IS NULL)
AND mb.member_nbr = 'A1000073000 ')
eff_pcp,
member_span ms1
WHERE ms1.member_nbr = eff_pcp.member_nbr
AND (SUBSTR (eff_pcp.aff_nbr, 1, 6) =
SUBSTR (ms1.aff_nbr, 1, 6))
ORDER BY ms1.ymdeff DESC)
---------- end of my part ----------
table_x) got_gaps;Outputs that i got when i ran that code for each individual members..
Sorry to bug you frank and thanks for all the help.I will post here if i get any other data.
Thanks
phani -
Hello Experts Please help me to solve this problem.
Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael -
My iPhone will not ring when a call comes in. It goes straight to voicemail.
What can I do when my iPhone does not ring, and just goes to voicemail?
Call your wireless carrier. I had the same issue once. the problem was on their end.
-
HT1349 I can't talk when I calling. Nobody can hear me, and it works sometimes and sometimes not.
My Iphone4 has a talking problem. The Apple store said it is nothing wrong with the phone, but when i calling nobody hear me. But it can talk on video or other issues.
Follow these exact instructions:
1) http://www.apple.com/support/itunes/contact/
2) Get iTunes support via Express Lane
3) iTunes store
4) Purchases, billing & redemption
5) iTunes Store account billing
6) Fill out info about your device (the one you're accessing iTunes from)
7) Continue
8) Sign in with Apple ID
9) You see "Contact Options." DO NOT choose chat later, but rather select Email. -
turned of randomly.
have tried-
pressing the home and lock button at the same time
plugging it into itunes and restoring(still does not work, keeps saying error 28)
any other suggestions
i have not dropped it in the past
i just got this phone
PLEASE HELP!!!See This Discussion > https://discussions.apple.com/thread/4087808?start=0&tstart=0
-
Please help me to solve this problem.
Hi , can someone help me to solve the following problem:
1) I wrote two different client and server program, (Using UDP)
2) In the server side for testig I wrote some code like when a client sending message to server
a) server find on the database only senders IP address then server return the message to sender
b) Again if server find out other IP address too then it returns to them too
3) but it working for (a) , but not for (b)
4) Actually, its sending message but client not getting it
So, can some tell me, how to modify server or client side
Server wont reply the msg to the same IP address/ Sender who sent the message.
Server will reply the message to other person..
For example, Alace, Bob and Carrry are three clients. Alace, Bob, and Carry are online now. When they get online server save there IP address.
Now, Bob sends a message to server , then server will send the message to Alace and Carry. Not to the sender Bob.
Thanks]
I am giveing a pice of coding of server side
else
IPAddressObject addressObjectt;
onlineUserList.reset();
for(int i=0; i<onlineUserList.lengthIs(); i++)
addressObjectt=(IPAddressObject)onlineUserList.getNextItem();
IPAddress=addressObjectt.getAddress();
System.out.println("\n this is not same : "+IPAddress);
if(addressObject.compareTo(addressObjectt)!=0)
System.out.println("\n this is not same : "+sentence);
String cSentence=sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
System.out.println("\n aaaaaaa : "+IPAddress);
client.send(sendPacket);
else
System.out.println("\n this is same : "+sentence);
String cSentence= sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
client.send(sendPacket);
System.out.println("\n this is same : "+cSentence);
}//for
}//else
Edited by: kidylimp on Apr 8, 2008 12:16 PMThis looks suspiciously like a cross-post
[http://forum.java.sun.com/thread.jspa?threadID=5283608] -
ROW CHINK - difference - Please help me to solve this
Hi,
Customer sent a logical dump file.
This is the scripts generated from Original dump file by .
======================================
c:> imp mhubadmin/mhubadmin file=db.dmp log=imp.log show=y tables=LOAN
" "INSERT_DATE" DATE, "UPDATE_ID" VARCHAR2(20), "UPDATE_DATE" DATE, "MORTGAG"
"E_TERMS_ID" NUMBER(20, 0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 S"
"TORAGE(INITIAL 131072 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "TS_SMALL" "
"LOGGING NOCOMPRESS LOB ("LOAN_FILE") STORE AS (TABLESPACE "TS_LARGE" ENABL"
"E STORAGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE STORAGE(INITIAL 67108864"
" FREELISTS 1 FREELIST GROUPS 1))"
Here we dont have any idea about the block sizes of databases in Customer side.
We imported the 'DB.DMP' file to TEST server
In TEST server side,
db_block_size=2k
TS_SMALL tablespace block size = 2k
TS_LARGE tablespace block size = 16k
========================================================
(" "INSERT_DATE" DATE, "UPDATE_ID" VARCHAR2(20), "UPDATE_DATE" DATE, "MORTGAG"
"E_TERMS_ID" NUMBER(20, 0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 S"
"TORAGE(INITIAL 131072 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "TS_SMALL" "
"LOGGING NOCOMPRESS LOB ("LOAN_FILE") STORE AS (TABLESPACE "TS_LARGE" ENABL"
"E STORAGE IN ROW CHUNK 65536 PCTVERSION 10 NOCACHE STORAGE(INITIAL 6710886"
"4 FREELISTS 1 FREELIST GROUPS 1))"
=========================================
In both case Table is created in TS_SMALL tablespace,
LOB segment is cretaed in TS_LARGE tablespace
OK this is not a problem
See the differnce in ROW CHUNK.
Ist case ROW CHUNK = 8192
Ist case ROW CHUNK = 65536
With out doing anything manually how this difference is comming? Please help me.
The problem occurs when I tried to export This table from TEST server, and trying to import to DEVELOPMENT server with same block sizes as TEST server.
It is throwing this error.
"LOGGING NOCOMPRESS LOB ("LOAN_FILE") STORE AS (TABLESPACE "TS_LARGE" ENABL"
"E STORAGE IN ROW CHUNK 65536 PCTVERSION 10 NOCACHE STORAGE(INITIAL 6710886"
"4 FREELISTS 1 FREELIST GROUPS 1))"
IMP-00003: ORACLE error 22851 encountered
ORA-22851: invalid CHUNK LOB storage option value
IMP-00008: unrecognized statement in the export file:
IMP-00008: unrecognized statement in the export file:
regards
MathewYou appear to be experiencing Bug 3448802 Exp/Imp view problems if LOB tablespace blocksize different to table blocksize.
The issue is reported to be fixed in 9.2.0.8 server patch and 10.2.0.1 base release.
Without access to Metalink, you will be unable to get the 9.2.0.8 patch.
You can try making the tablespaces the same block size for both the table and the LOB segment to see if that works around the problem you are experiencing. -
I cannot download any app from the AppStore on my ipad2 v5.1
The installing processes always stop with the sign "waiting......." and didn't show any progress at all
Anyone ,please help me solve the problem, thanksThe ipad question was someone else's. I have no problem with any other device (laptop, Nook, PS3, Android daughter's phone) at home or work. Just my iphone. I tried posting my question a few times and it has yet to show up. At least this made it online! I was almost ready to purchase an Ipad3, but this is starting to make a Galaxy Tab look pretty good!
This problem seems way too common to be a fluke! My search results yielded- http://search.yahoo.com/search;_ylt=A0oG7hsbdq1PzQMA1N5XNyoA?p=IOS%205%20apps%20 waiting&fr2=sb-top&fr=chr-hp-psg&type=HPNTDF&type_param=HPNTDF
I performed a sync last night too!
Maybe you are looking for
-
Hi, I have a need to open blob_content files from wwv_document$ and read/print them in a portlet. Can i do that using dbms_blob?. If so can somebody guide me the steps to follow? Else is there any other way sicne the files are really huge and i need
-
Can't convert Word 2003 file to PDF
Downloaded the trial version of Adobe XI (Win7) and am using Word 2003. Tried to create a PDF from the Print menu (didn't work); the built-in menu in Word (didn't work). All I get is a 'PDF' file on my desktop (not saved as the name I initially gave
-
How is delivery date calculated
How can anyone please explain how delivery date is calculated using forward and backward scheduling I want to have it broken down into the following steps for eg for delivery date calculation following dates are used Material Availabilty Date Materia
-
Concerns regarding the softwere of the camera.
Dear apple, my name is D@%8eL. I wanted apple to know that this technology is amazing and is enabling me to express myself in ways before unimaginable. The concern regarding this letter is not merely to show appreciation but to ask you guys at Apple
-
Dynamic Display/Hide/Disable/Enable Portal Tabs..
We have a Portal Page Group with multiple TABS. We like to be able to display/hide (or enable/disable) tabs based on the Portal Roles assigned to the current user. Is it possible to Hide/Display tabs dynamically based on certain conditions? What is t