Microsoft office professional 2013 encountered an error during setup
Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?
I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram
Similar Messages
-
Microsoft SharePoint Server 2013 encountered an error during setup
(the html editor over here is a pain you know where - not even bold text is working...)
Every time I try to install SP 2013 SP1 on my WS 2012 R2 Update virtual machine the installer dies.
NOTE: I can reproduce this any time. Both the SharePoint 2013 (including SP1) .iso as well as the WS 2012 R2 (including Update) .iso are fresh copies out of the MSDN library.
The installation fails where the installer tries to install the binaries. No configuration wizard yet. I made sure all the prerequisites are there. The PreRequisitesInstaller.exe reboots the virtual machine several times (twice) and then it is all set.
PS C:\Users\bsom> add-windowsfeature net-wcf-http-activation45, net-wcf-tcp-activation45,net-wcf-pipe-activation45
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\rsom> Add-WindowsFeature Net-Framework-Features,Web-Server,Web-WebServer,Web-Common-Http,Web-Static-Content,
Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-App-Dev,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-
Health,Web-Http-Logging,Web-Log-Libraries,Web-Request-Monitor,Web-Http-Tracing,Web-Security,Web-Basic-Auth,Web-Windows-A
uth,Web-Filtering,Web-Digest-Auth,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Mgmt-Tools,Web-Mgmt-Conso
le,Web-Mgmt-Compat,Web-Metabase,Application-Server,AS-Web-Support,AS-TCP-Port-Sharing,AS-WAS-Support, AS-HTTP-Activation
,AS-TCP-Activation,AS-Named-Pipes,AS-Net-Framework,WAS,WAS-Process-Model,WAS-NET-Environment,WAS-Config-APIs,Web-Lgcy-Sc
ripting,Windows-Identity-Foundation,Server-Media-Foundation,Xps-Viewer
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\bsom>
UPDATE: I had a quick look at %Temp%\SharePoint Server Setup(20140513...).log
2014/05/13 20:30:40:858::[2344] Log level changed from: Verbose to: Standard
2014/05/13 20:30:40:858::[2344] Error: Failed to install product: D:\global\oserver.MSI ErrorCode: 1603(0x643).
2014/05/13 20:30:40:858::[2344] Log level changed from: Standard to: Verbose
2014/05/13 20:30:40:858::[2344] Rolling back chain
Any ideas?
UPDATE: Installing office prior to the sharepoint installation had no effect (solution was suggested here).
UPDATE: Installing all windows updates (for Windows Server and Office client applications) didn't help either... same error.
UPDATE: I made sure my windows server and sharepoint server images are exactly those you can currently find on MSDN. SHA1 hashes match.I just did a Server 2012 R2 and SP 2013 w/ SP1 install the other night on Hyper-V running on 8.1 Pro without issues. ISO was from MSDN.
Have you run a crc (or md5, forget what is used) to validate the ISO matches what MSDN says it should be?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Microsoft Sharepoint Designer 2013 encountered an error during setup
I'm trying to install SharePoint Designer 2013 on my system, but I keep getting this error with no other detail. Looking into the SetupExe log file that the event viewer pointed to didn't really identify anything that would point me
to the culprit (or at least nothing I could decipher). I am running Windows 7 (64 bit) and Office 2010 (32 bit). Anyone run into this before?I am also trying to install SP Designer 2013 (32-bit) on my Windows 7 Pro 64-bit OS with MS Office 2010 32-bit and getting the same error about 30% into the install. I have attempted to uninstall other 3rd party programs and apps for example Citrix
and Skype and still no success. I tried booting up in safe mode and get the same error right at the onset of the install.
Update: Tried a "clean boot" install and that also failed. -
"Microsoft Office Professional Plus 2013 encountered an error during setup."
"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Microsoft office 2013 encountered an error during setup in Window 8.1
Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register -
Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer -
Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.MainHi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com -
Microsoft LYNC Basic 2013 encountered an error suring Setup
Dear Team,
I have tried most of the suggestions provided on net.
I have followed below steps as of now.
1) Uninstall earlier version of LYNC.
2) Deleted registry, & rebooted the system.
3) Logged in with Administrator.
Still I'm facing issues while installing Lync Basic 2013.
Please note that I'm trying to install LYNC Basic 2013 on Windows 7 SP1 & Windows 8 systems.
Thanks & Regards,
Akshay Jadhav
IT Team - Wipro
Serivce Rendered at Shoppers Stop Ltd.
9833347767verify that you install correct version { for example of your office is 64 bit, Lync basic must be 64 bit} , Lync Basic 2013 is available on the Microsoft Download Center and comes in two versions:
Microsoft Lync Basic 2013 (64 Bit)
Microsoft Lync Basic 2013 (32 Bit)
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Microsoft Office 2010 encountered an error during setup: With No error codes/
Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry -
Microsoft Office Professional Plus 2010 VBA error
This question has been asked many times and I have yet to find an answer that actually works. I am running Windows 7 Professional with Microsoft Office Professional Plus 2010. It has been working perfectly until now. When I start Word I
get the error "Microsoft Access 2010 requires Visual Basic for Applications. If you continue, Visual Basic will be installed." This then starts a series of uneventful installations one after the other until finally stopped and then an
error report with instructions opens and talks about macro security settings. This only happens when opening Word - not any other Microsoft Office programs. By the way, changing those security settings did not work.
I have tried all "fixes" offered and nothing has worked including registry changes and even Microsoft's Fixit. What am I missing?Hi,
I'm not quite sure what you have already tried. I would suggest you try to launch Word 2010 in
safe mode and see if issue persists:
Press Win + R and type "winword.exe /safe" in the blank box, then press
Enter.
Some have reported that it was caused by some third party add-ins and disabling all the add-ins fixed the issue. Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Error Installing Microsoft Office Professional Plus 2010
Hello!
I've tried to install Microsoft Office Professional Plus 2010 but when it finished the installation, this error message appeared:
Microsoft Office Professional Plus 2010 encountered an error during setup.
The source installation package for the product Microsoft Office Professional Plus 2010 is out of sync with the client package. Try the installation again
using a valid copy of the installation package'Office64WW.msi'."
-Please help me with this. Thanks!Hello!
I've tried to install Microsoft Office Professional Plus 2010 but when it finished the installation, this error message appeared:
Microsoft Office Professional Plus 2010 encountered an error during setup.
So, could you still open Office application even user get the error message?
If you deploy Office suite by deployment tool or system center and meet the sync timeout issue, try to copy the installaion source to the local drive and reinstall it again.
In addition, I think the link DushYant provided is also helpfule to you. Please check that. Thanks.
Tony Chen
TechNet Community Support -
Microsoft Office Professional Plus 2013 TRIAL PL
Hello,
I want to download Microsoft Office Professional Plus 2013 TRIAL PL, but now it is
not available on technet in PL version !!! All of the pages link to the technet (http://technet.microsoft.com/en-us/evalcenter/jj192782). Do you have direct link to TRIAL PL version ?Hi,
I can download Office 2013 trial from the link that you provided. Is there any response after clicking the button of “Get Started Now”?
Maybe you change the URL into this site, then you can download Office 2013 trial directly.
http://care.dlservice.microsoft.com/dl/download/2/9/C/29CC45EF-4CDA-4710-9FB3-1489786570A1/OfficeProfessionalPlus_x86_en-us.img
hope it can be helpful.
Regards,
Greta Ge CHN
TechNet Community Support -
I use Microsoft Office Professional Plus 2010, when clicking a link in Outlook I always get a box stating
General Failure. The URL was "http:// etc etc".The system cannot find the file specified.
Yet it still goes to the specified page. Any ideas on how to resolve thisI am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
Office Professional 2013 on Windows Server 2012 R2 Essentials
I installed Office Professional 2013 using emailed key - AAA-02768 * KEY ONLY EMAIL * Any attempt to run the installed software reports "
Must have Volume Licence edition of Office" I downloaded volume licence pack and get told my OS is not a VL edition. What do I need to get Office 2013 running on this server? One person will remote desktop into it, I purchased 5 RD licence
as I was told this was essential. I tried one solution downloading a trial, install from Install Application on Remote Desktop but that reported invalid key. Can it run? I know it is mainly a server, not a workstation, but surely Office can
run on it.Hi Michelle,
Where did you download the volume license edition of Office 2013? At what exactly point did you get the "OS is not a VL edition" message?
Generally, to install Office 2013 on a server with RDS, you must have a volume license and you must use Office Professional Plus 2013 from the
Volume Licensing Service Center (VLSC).
For more information about the volume licensing for your situation, you should contact your local reseller or Microsoft partner.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Microsoft Office Excel has encountered a problem and needs to close
Hi,
I am executing the following code in an excel application and while closing excel I am getting the error
'Microsoft Office Excel has encountered a problem and needs to close'.
EnterpriseSession boEnterpriseSession;
ReportEngines boReportEngines ;
IReportEngine boIReportEngine;
CrystalDecisions.Enterprise.SessionMgr loginSessionManager = new CrystalDecisions.Enterprise.SessionMgr();
CrystalDecisions.Enterprise.EnterpriseSession boEnterpriseSession = loginSessionManager.Logon("userName", "password", "cms", "authentication");
int iMinuteNumber = 1;
int iLogonNumber = -1;
string strToken = boEnterpriseSession.LogonTokenMgr.CreateWCAToken("", iMinuteNumber, iLogonNumber);
boReportEngines = new ReportEngines(strToken);
boIReportEngine = (IReportEngine)Session.boReportEngines.getService(ReportEngineType.WI_ReportEngine);
The exception that is displayed while debugging is 'BusinessObjects.ThirdParty.OOC.OB.AssertionFailed'.
Thanks,
Divya
Edited by: dpanicker on Jun 23, 2010 6:47 AM
Edited by: dpanicker on Jun 23, 2010 7:26 AMI'm curious how you are running this code within excel as I would expect you would've had to write a dll to expose the SDK as COM in order to be able to access it from an excel document.
Maybe you are looking for
-
I recently changed the email address and name attached to my account. I also removed the only credit card that was linked to the card, selecting the 'None' option. I could log in to the App Store from iPhone 4. I could NOT log in to ITunes Store or m
-
How can I check who changed a room number for an Asset?
Hi people! I'm working as BASIS and in december we make a restore from production to another environment to make some test.. a user tell me that in transaction AS03 for an specific Asset number and company code the number of the room are difere
-
Volume encrypt and erase failed; unable to delete core storage logical volume
I was attempting to slowly migrate [MI-***] from early 2013 MBPRO to New iMac 5K w/Ceiling Level components. Kept going through LONG process and then told me it couldn't create [MBPRO HD Home Username] "Jim" on volume or whatever. NO FileVault enabli
-
OK..... I've PM server on linux machine...I've deployed FileAdapter connector and restarted server... I've deployed ComplexStructure tutorial but in BPEL Console I've this error for ComplexStructure Process: Exception Name: Error while creating activ
-
PDF displays grey lines.
Hello, I'm working on a catalogue for my work. I have been placing various text and images in my document and all went well untill now. Every image is put in the same way and showed no abnormalities whatsoever. I now have two images which look normal