Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Adobe Air 3.6 - Support for Windows Server 2008 R2?

Hello all,
Adobe lists "Windows Server 2008" in the list of supported operating systems.
We tested our application on a Win 2008 R2 terminal server and could'nt find any issues so far. Is there a reason why Adobe does not list "Windows Server 2008 R2" (64 Bit) in the supported platforms list?
Thanks in advance!

Hello Tobias
please have a look at the SAP note
[66971|https://service.sap.com/sap/support/notes/66971]
Win 2008 Server R2 is not released for Sapgui 710 !
Only Sapgui 720 is released for this Windows OS!
Also please note the Sapgui 710 is supported until the 12. of April 2011 !
Please see note [147519|https://service.sap.com/sap/support/notes/147519] !
Best Regards
Sven

What are the netsh cmd line for windows server 2008,2012 ?

Hi
I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
Before Netsh cmd support for all os including Win 8,win 8.1.
I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
This is my code in asp.net using vb
Dim pip As New Process()
Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
pip.StartInfo = pipa
pip.StartInfo.UseShellExecute = False
pip.StartInfo.RedirectStandardOutput = True
pip.Start()
pip.WaitForExit()
And if change ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
I can change ip,subnet,gateway,both dns is some other way,below is the link
http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
Pls reply asap
Regards
Aravind

For the shell scripting I'd try them here.
Scripting forum on MSDN
Scripting Guys forum on TechNet
For the asp.net I'd ask over here.
Microsoft ASP.Net forums
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Librfc32 support on Windows server 2008

Hi,
We at Trango Software (division of Siemens Enterprise Networks) are currently using the SAP Remote Function Call runtime as a part of our product (librfc32.dll, File Version 6403.3.55.4580). We will be supporting Windows Server 2008 platform from our product's next release. We are assessing compatibility on Windows Server 2008 platform of all the third-party libraries and tools that are part of our product.
We would like to know if the SAP remote function call runtime dll (librfc32.dll) is currently supported with Windows Server 2008. If not, we would like to know when (tentatively) it is expected to be supported.
Thanks a lot for your help.

Hello,
have you configured the accounts to have the permission "Log on as a service"? I have seen that this is not given to the account and therefore the service fails to start.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Internet Explorer 10 for Windows Server 2008 R2

I need to install IE 9 or IE 10 on a Windows Server 2008 R2. IE 9 or 10 is specified because of compatibility with some of our applications that have been developed in house.
An earlier post listed the link
http://download.microsoft.com/download/8/A/C/8AC7C482-BC74-492E-B978-7ED04900CEDE/IE10-Windows6.1-x86-en-us.exe as a source for the IE 10 download, but when I downloaded it and tried to install it, I got an error "Operating System is not supported".
I am hesitant to download it from one of the non-microsoft sites that offer it.
Is there a way to download and install IE 10 to Windows Server 2008 R2?
Thanks very much for your help.

Hello Logan,
Unfortunately, I did not find any download link of IE 9 or 10 from Microsoft's server. I think they are closing IE 10 or below versions for their OS.
However, I found an external link to download IE 10, if you want then visit:-
https://cyrusbesharat.wordpress.com/2013/02/27/download-ie-10-final-version-for-windows-server-2008-r2/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Require list of all events for Windows Server 2008 Active Directory

Hi all,
I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
Regards,
SR

Hi,
Thanks for your posting.
Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
to collect them into one file.
Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
Directory to record other events in the directory services log, we need to modify registry.
For more information please refer to following MS articles:
Active Directory Diagnostic Logging
http://technet.microsoft.com/en-us/library/cc961809.aspx
How to configure Active Directory diagnostic event log
http://support.microsoft.com/kb/314980
Lawrence
TechNet Community Support

Multi-Hypervisior Manager support for Windows Server 2012 R2

Hi,
I am attempting to connect to a Windows Server 2012 R2 Hyper-V and am getting the following error message.
"Unable to Connect to host hyper01"
I have tested and can connect to a Windows Server 2012 without issue. Checking the documentation for support and whilst Windows Server 2012 is not supported I wanted to ensure I wasn't making an error.
If it is indeed not supported at this moment, is there a viable alternative?
Many Thanks
Tristan

Hi,
Windows 2012 R2 is not supported by MHM 1.x. Please take a look at http://www.vmware.com/pdf/vcenter-multi-hypervisor-manager-11-guide.pdf, page 9, "vCenter Multi-Hypervisor Manager Software Requirements" section.
For you convenience I'm pasting the list of supported third-party hypervisors:
Microsoft Hyper-V Server 2012
Microsoft Hyper-V for Windows Server 2012
Microsoft Hyper-V Server 2008 R2
Microsoft Hyper-V for Windows Server 2008 R2
Microsoft Hyper-V for Windows Server 2008
Regards,
-Ilko

DLGDIAG for Windows Server 2008 R2

Greetings, we have a portable WD My Book 1140 USB device attached to Windows Server 2008 R2 and started to receiving event logs: The driver detected a controller error on \Device\Harddisk2\DR2. After checking the disks the DR2 points to attached WD but we are unable to run DLGDIAG 1.28. After checking Lincense Agreement and NEXT It says that DLGDIAG for Windows has stopped working. Problem signature:
Problem Event Name:   BEX
Application Name:   WinDlg.exe
Application Version:   1.28.0.0
Application Timestamp:   5409ee85
Fault Module Name:   WinDlg.exe
Fault Module Version:   1.28.0.0
Fault Module Timestamp:   5409ee85
Exception Offset:   000420a2
Exception Code:   c000000d
Exception Data&colon;   00000000
OS Version:   6.1.7601.2.1.0.272.7
Locale ID:   2055
Additional Information 1:   4778
Additional Information 2:   47782f7409a31893fc1890159f8bdcb7
Additional Information 3:   5821
Additional Information 4:   5821c1a5c4e07b6623cb80da3469072f
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt Any suggestion have to check the consistency of the attached disk without unplugging it from the server? Thanks a lot in advance for any feedback.

Hello and welcome to the WD Community,
The DLG tool is not fully supported on Windows server 2008 R2
As a recommendation, test the unit on a different OS using the DLG Tool or you can try using a third party app that works for windows server.

AD Management Gateway Service for Windows Server 2008 SP2

Hey,
I'm having the same issue as in this thread.
https://social.technet.microsoft.com/forums/windowsserver/en-US/93be1866-8aa8-4004-be95-113b7a4faef2/ad-management-gateway-service-for-windows-server-2008-sp2
And trying to follow the 5 step procedure listed in the 3rd post, but am stuck on step 5, getting the hotfix from Microsoft. The link posted from the Hotfix page is just a generic Microsoft Support page. Which is not helpful. How do I actually contact them
(phone # or email address) to get the software?
Thanks In Advance,

No luck. I've tried the chat which asks which Windows version Im using and there's no Server 2008 only desktop versions. I called and after talking with 3 people I got cut off. There has to be an easier way to get a simple file downloaded.
You can hire me to do it for you. I am always successful at contacting MS Support.
You didn't follow the instructions I posted.
Reach us over the phone at 1-800-642-7676 (TTY: 1-800-892-5234)
http://smallbusiness.support.microsoft.com/en-us/contact/
Click Technical Support for Chat.
GREAT BIG BLUE BUTTON SAYS "Technical Support" - CLICK IT AND SELECT WINDOWS SERVER AT THE BOTTOM OF THE LIST.
It is really that easy.
¯\_(ツ)_/¯

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Issue Installing SP2 for Windows Server 2008 SP1

Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.

Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000)

Management Pack for Windows Server 2008 Enterprise SP1

Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?

Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801

Oracle db 11gR2 for windows server 2008(64 bit)

Hi,
i want to download the Oracle DB 11gR2 installable for windows server 2008(64 bit), but i am unable to find it in e-delivery or anywhere else in oracle website.
Please let me know if this installation is possible or not and the link from where i can download the installer.
Thanks in advance.

Hi;
All related information cover at below notes:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Release Schedule of Current Database Releases [ID 742060.1]
Database 11g Release 2 Certification Highlights [ID 1065024.1]
Regard
Helios

Oracle Database 10g(10.2.0.1.0) for Windows server 2008 SP1

Hi,
I would like to install Oracle database 10g on Windows server 2008 SP1. What is the supported version ?
As I go through certification matrix on Oracle support, 10.2.0.5.0 is supported on Windows Server 2008, however I can I install it directly.
Any help in this regard is highly appreciated.
Thanks

TheExplorer wrote:
Thanks srini for your reply.
Currently, we are running a lower version of database i.e 10.2.0.1.0 on windows server 2003. I need to migrate theses servers into virtual environment running Windows server 2008 64 bit.
The document you referred applies to MS Windows 32 bit. However, I see that Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5) for Windows x64 are supported on Windows Server 2008 R2 x64.http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
From where, can we download the older versions of Oracle database as it is not available on OTN (The version of Oracle Database you are looking for is no longer available on OTN. Please visit any of the following links for current release information).
Looking ahead for the right direction
Thanks
You have to open a service request at My Oracle Support.

Office Jet pro 8610 for windows server 2008 R2

I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.

Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Similar Messages

Maybe you are looking for