Microsoft word does not exist. Please installe Microsoft Word 2000 or later

Hi,
I am running RoboHelp X3 and recently upgraded to Windows XP
running Word 2003 and now cannot generate printed documentatation
because of problems with Word. Despite changing the registry as
suggested in another forum post (which I think was actually about
importing, but sounded similar)
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_61483
the error still occurs.
Winword.exe only appears in C:\Program Files\Microsoft
Office\OFFICE11 if I enable access to hidden files. Could this have
anything to do with the problems I am having?
Can anyone help with this problem?
Thanks

Unfortunately not. Peter's advice is spot on. I knew an
engineer once who put a very large 3 litre engine on the chasis of
a Ford Fiesta. It worked until he went over a bump one day and the
engine fell out on the floor. Moral: Beware of backward
engineering. Or should that be backward engineers

Similar Messages

"A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer."

I am a new RoboHelp user und I want to import content written with Word 2013 into RoboHelp.
I'm using RH HTML 9.0.2 and MS Word 2013 (Office 2013) on a Windows 7 professional computer.
When I try to import a Word-Document (I downloaded and used the example document from Peter Grainge and also tried other Word-documents) I get the following message:
"A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer."
What can I do?

The error message is wrong as regards the version you need to install. It should state that you need a compatible version and the latest is Office 2010. Even Rh10 does not support Office 2013.
There is a workaround when generating printed documentation but not when importing. You need to install Word 2010 which can co-exist with Word 2013 if you want to retain that for other purposes. Before using Rh to import, run Word 2010 first.
To generate printed documentation using Word 2013, right click Properties in the layout, it works from there.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error saying Microsoft Word does not exist

I have Microsoft Office 2007 on my computer, and RoboHelp X3.
When I try to create a manual in Word, it gives me an error message
saying, "Printed Documentation: Microsoft Word does not exist.
Please install Microsoft Word 2000 or later." How do I get the two
applications to recognize each other?

Welcome to the forum.
You won't get them to recognise each other. The first version
of RH to work with Word 2007 is Adobe RH7.
You can dual install an earlier version of Word if you still
have a licence. How is on my site.
RH has to be installed after Word and you should install the
versions of Word in the order of release. Don't be too surprised if
you hit some issues.
I would recommend upgrading RH. X3 is pretty old now.

RH9, 32-bit Word 10, "A supported version of Microsoft Word does not exist."

I upgraded to RH9 to try to get past this problem, but I'm still getting the error.
Printed Documentation
A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer.
OK

My bad, I didn't realize that upgrading to TCS 3.5 didn't remove RoboHelp 8.

The namespace microsoft.interop.word does not exist in sharepoint custom pages

Hi,
I wrote a code in sharepoint custom pages in which generates pdf from gridview .
BUt in namespace only i am getting errror like namespasce of microsoft.interop.word does not exist.
But in vs 2010 it works. how to reference dll for custom pages?

If you are trying to generate pdf directly from html then i dont think you need Interop.word, but yes if in case you are utilizing office 2010 feature save as pdf from word document then you need the dll referenced in your project.
However you might want to look at these options
1) Create an rdlc report, render it in report viewer, you will get export to pdf option or you can also dynamically generate the report in pdf
OR
2) take a look at this link, you can export your grid view into pdf
http://www.aspsnippets.com/Articles/How-to-export-GridView-data-to-PDF-file-in-ASPNet.aspx
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

RH HTML v9.0.2: Supported Version of Word Does Not Exist Error

Hello,
I am running RoboHelp HTML v 9.0.2.271 on a Windows 7 64-bit machine, with Microsoft Office 2013 32-bit installed.
When I try to generate printed output, I get a message box stating that "A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer." I have tried different projects, including the sample RoboHelp projects, and get the same message.
I have read other similar questions, but for many of the people the problem was due to running a 64-bit version of Word.
1) Is there somewhere in the RH interface that I can "select" the version of Word I am running or set the path to my Word install folder?
2) Is there a fix available?
3) Will upgrading to RH 11 fix the problem?
Thank you for your input....

No.
Well, it's not supported and it's a hack... But you may want to try: Re: Importing Word 2013 files into existing projects in RH10
Yes. Office 2013 is fully supported in RoboHelp 11. Upgrading will also solve browser compatibility options as well give you lots of new features. See Peter's RoboHelp Tour.
Kind regards,
Willam

Error: Javax.mail does not exist, please help

I have copies mail.jar and activation.jar in the classpath directory as instructed, then try to compile but got the below error: package javax.mail does not exist
please help.
G:\CRD>javac SendMailBean.java
SendMailBean.java:22: package javax.mail does not exist
import javax.mail.*; //JavaMail packages
^
SendMailBean.java:23: package javax.mail.internet does not exist
import javax.mail.internet.*; //JavaMail Internet packages
^
SendMailBean.java:43: cannot resolve symbol
symbol : class Session
location: class SendMailBean
Session l_session = Session.getDefaultInstance(l_props, null);
^
SendMailBean.java:43: cannot resolve symbol
symbol : variable Session
location: class SendMailBean
Session l_session = Session.getDefaultInstance(l_props, null);
^
SendMailBean.java:48: cannot resolve symbol
symbol : class MimeMessage
location: class SendMailBean
MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
^
SendMailBean.java:48: cannot resolve symbol
symbol : class MimeMessage
location: class SendMailBean
MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
^
SendMailBean.java:50: cannot resolve symbol
symbol : class InternetAddress
location: class SendMailBean
l_msg.setFrom(new InternetAddress(p_from)); // Set the From address
^
SendMailBean.java:53: package Message does not exist
l_msg.setRecipients(Message.RecipientType.TO,
^
SendMailBean.java:54: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_to, false));
^
SendMailBean.java:57: package Message does not exist
l_msg.setRecipients(Message.RecipientType.CC,
^
SendMailBean.java:58: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_cc, false));
^
SendMailBean.java:62: package Message does not exist
l_msg.setRecipients(Message.RecipientType.BCC,
^
SendMailBean.java:63: cannot resolve symbol
symbol : variable InternetAddress
location: class SendMailBean
InternetAddress.parse(p_bcc, false));
^
SendMailBean.java:68: cannot resolve symbol
symbol : class MimeBodyPart
location: class SendMailBean
MimeBodyPart l_mbp = new MimeBodyPart();
^
SendMailBean.java:68: cannot resolve symbol
symbol : class MimeBodyPart
location: class SendMailBean
MimeBodyPart l_mbp = new MimeBodyPart();
^
SendMailBean.java:72: cannot resolve symbol
symbol : class Multipart
location: class SendMailBean
Multipart l_mp = new MimeMultipart();
^
SendMailBean.java:72: cannot resolve symbol
symbol : class MimeMultipart
location: class SendMailBean
Multipart l_mp = new MimeMultipart();
^
SendMailBean.java:83: cannot resolve symbol
symbol : variable Transport
location: class SendMailBean
Transport.send(l_msg);
^
SendMailBean.java:98: cannot resolve symbol
symbol : class MessagingException
location: class SendMailBean
} catch (MessagingException mex) { // Trap the MessagingException Error
^
19 errors

Another person who doesn't understand how to set CLASSPATH.
Move those JARs into the same directory as your SendMailBean.java and do it like this:
javac -classpath .;mail.jar;activation.jar -d . *.java
java -classpath .;mail.jar;activation.jar SendMailBeanRead how to set CLASSPATH properly:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/classpath.html

Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

Hi All,
Iam getting error message while creating intercompany sto PO in my QA clinet.
(Customer PC3000 does not exist (please change entry in plant 3000)
Vendor maintained both the plant(supply and receeving plant)
Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
I had checked OMGN t-code setting looks good.
Same setting I had tested on DEV and SANDBOX its wokring fine.
Please help me out how to solve this problem
Thanks
Raj K

Hi,
I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
Regards,
Onkar

Encountering error: "field does not exist, please re-enter" when setting up basic calculation

I created a form in InDesign with many form fields. I would like to be able to have specific form fields generate a sum total in another form field. In acrobat, when I select the form field I wish to have the calcualtion appear in, I select the fields I want to calculate and when I click OK, I am greeted with a pop-up error that the "... field does not exist, please re-enter". I can see that there is a field present when I select "Highlight Existing Fields", I can select it and even fill it in manually. What am I doing wrong?
I attempted to contact Adobe Help chat and they threw up their hands and directed me here. Does it have something to do with the naming convention? I am stumped but I really need to figure this out. Do I need specific script to drop into the field notation box?
Thanks,
In Over My Head

Thank you George.
Keeping the file names simple seems to be helping.
I am now encountering an issue where some field calculations (rouhgly 20 out of 58 different basic calculations) do not compute.They create no sum and remain "zero" despite being created the exact same way as all the other calculations that appear to be working flawlwessly.
I don't understand and it is giving me kittens.

Field does not exists Error - INSTALLATION TABLE

We have applied ML MP9 on system database for our eRecruit Instance. We are getting a "Field does not exists" (for eg., INSTALLATION.GL) error for the components which refers to INSTALLATION table.
The error gets resolved if we introduce a .value in PeopleCode.
Note: Our Dev Instance is working fine which has ML MP9 applied on it.
Please find the PeopleBooks Comments for the .value Property:
Considerations Using INSTALLATION or OPTIONS Tables
When using the INSTALLATION or OPTIONS table, you cannot use the Value property. You must use the old style format, not the field object format. For example, the following code is invalid:
If %Page = Page.GP_RUN_TYPE And
INSTALLATION.TL.Value = "N" Then
&RS2.HideAllRows();
Thanks & Regards
Sudha

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Error message ORA-27101 shared memory realm does not exist,Please help me

My oracle(oracle 8.1.6) is installed successfully,But when I connect to the database it shows me the error:
ORA-27101 shared memory realm does not exist.
How can I deal with it?Please help me.

The OTN Customer Service - Feedback forum answers questions relating to the OTN site and other customer service issues. It does not answer technical or installation questions. Please post your topic in the appropriate forum.
Best Regards, OTN Team

ORA-27101: shared memory realm does not exist - Please help!!!!!

OS : Win 2000 server
After good installation, when I want to connect instance ORCL by using SQLPLUS worksheet (as system/manager), I got this 2 error messages :
ORA - 01034 : Oracle not available
ORA - 27101 : shared memory realm does not exist
In regedit: Ora_home = "my true path to Orahome directory
Default_SID = ORCL
Thank you for help !!!!!!

Can you connect using plain SQL*Plus (sqlplus.exe)? Your database may not be started, try this:
c:\sqlplus /nolog
SQL>connect / as sysdba
SQL>startup
Then try connecting as one of the default users:
SQL>connect scott/tiger

Javax.servlet does not exist (please help)

i was going to try my first example nad follwing head first
package com.myweb.trying;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Serv1 extends HttpServlet {
     public void doPost(HttpServletRequest request,HttpServletResponse response)throws IOException,ServletException{
          response.setContentType("text/html");
          PrintWriter out = response.getWriter();
          out.println("Shutup and see this");
          String c = request.getParameter("color");
          out.println("<be>the color selected is"+ c);
}on giving the command
C:\project1\app1>javac -classpath c:\Tomcat6\lib\servlet-api.jar:classes:. -d classes src\com\myweb\trying\Serv1.java
this is what i got
src\com\myweb\trying\Serv1.java:3: package javax.servlet does not exist
import javax.servlet.*;
^
src\com\myweb\trying\Serv1.java:4: package javax.servlet.http does not exist
import javax.servlet.http.*;
^
src\com\myweb\trying\Serv1.java:7: cannot find symbol
symbol: class HttpServlet
public class Serv1 extends HttpServlet {
                          ^
src\com\myweb\trying\Serv1.java:8: cannot find symbol
symbol : class HttpServletRequest
location: class com.myweb.trying.Serv1
       public void doPost(HttpServletRequest request,HttpServletResponse respon
se)throws IOException,ServletException{
                          ^
src\com\myweb\trying\Serv1.java:8: cannot find symbol
symbol : class HttpServletResponse
location: class com.myweb.trying.Serv1
       public void doPost(HttpServletRequest request,HttpServletResponse respon
se)throws IOException,ServletException{
                                                     ^
src\com\myweb\trying\Serv1.java:8: cannot find symbol
symbol : class ServletException
location: class com.myweb.trying.Serv1
       public void doPost(HttpServletRequest request,HttpServletResponse respon
se)throws IOException,ServletException{
                     ^
6 errors please help what im doing wrong
i have latest ver.6 of tomcat installed

exchange the : in your classpath with a ;
windows, in its infinite wisdom, uses a semi-colon as the path separator. the colon is what you would use if you were on unix, macosx, or linux.
== eldrich

Phase/operation in process order 1000028 does not exist (please check entr

Dear All
Kindly help me out in the following scenario
I am entering confirmation through COR6N, after selecting process order no. system is giving this error when i click on actual data. However there is only one phase and one operation in master recipe. Furthermore earlier I ran MRP, generated capacity requirements, converted planned order into process order, dispatched process order via CM22-leveling and now i am trying to enter phase confirmation.
waiting for your response..
Regards
Navaid

Hi,
Please check your operation/phase control key in your recipe (C202), may be it will be PI07 (no confirmation).
If yes, you can enter the phase number manually in COR6N
Thanks,
JK

When I paste a Pages document into an email it looks totally different. Even when I export it too Microsoft Word the Word document looks different. Apparently this does not happen if you have Word on your computer. Does anyone have experience?

I need to be able to copy/paste documents into the body of an email and have them look exactly like the original document. I could always do this on my PC using Microsoft Word. And all writers submitting work to agents do this. I just tried it with Apple's Pages and when I pasted it into the body of the email, the document looked totally different . . . no double spacing, no paragraphing etc. Even when I exported the document to Word, I copy/pasted it into an email and it looked totally different. I suspect Apple's version of Word does not perform like the real Word in all circumstances . . . Before I go out and buy Word and put it on my Apple, I would like to know if anyone else has had this issue and how they may have dealt with it. Thanks.

Drag and drop the file into the email, the formatting will be retained when it is opened by the recipient.

Microsoft word does not exist. Please installe Microsoft Word 2000 or later

Similar Messages

Maybe you are looking for