MiFi 4510L does not appear in available netwroks.  Can't connect device.

I can't seem to get my MiFi 4510L to show up in the available networks on seveal devices and it is driving me nuts. 
Here is what's happening..I turn the thing on and it goes through its Green-Purple dance and then settles on a solid green - that means I have 4G from what I have read.  I have 5 bars and a full battery yet it will not show as an available Network on any of my devices. 
I pulled the battery, resat the SIM card, did a reset but still nothing.  Call Tech and they shipped me a new one...
Put the old battery and SIM in and turned it on...it should up for a minute on my iPad (RIP SJ) & laptop but then disappeared.  Now no matter what I do it won't appear as an available network. 
Now the minute I take it outside, there it is..no problems and lightening fast.  I take it inside (I can see where I was outside from my window), not a peep...**bleep**?  It this thing so sketchy that a window is gonna make or break it?  Does the 5 bars & solid green mean something other than "all is good"?   Before you ask, I have already checked with the dog and he is not running a signal jammer..if only it were that easy..
Anyone have any ideas??
Thanks

I just had the same issue.  It was working for 1 week and I was using the connection yesterday.  Today I tried to get on tonight and the laptop couldn't see the SSID.  I rebooted the device a few times, removed the battery and still no go.  I was about to give up and rebooted it once more and then the SSID popped up.  I had a nice green 4G light and 3-4 bars for Verizon signal the whole time (when it wasn't rebooting), but no SSID showing up in a laptop right next to it.   I read in another post that if the wireless can't auto assign a channel that it may not bring up the wireless network.  I only have 3 other wireless networks visible in on the computer (ps I had other computers that could not see the SSID either), so I wouldn't think that is the issue.  I almost set the channel to a specific number, but figured I'd let it go and see what happens.  

Similar Messages

  • I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it...

    I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it... I have restarted my phone and computer, uninstalled itunes and reinstalled it, and punched a wall. idk what to do..

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • When registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem?

    when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
    thanks

    Is the English sim from the original carrier as that is usually the message you get with a carrier locked phone.

  • When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???

    When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???

    iOS: Device not Recognized in iTunes for Windows

  • My ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    iOS: Device not Recognized in iTunes for Windows

  • I've forgotten your password Baymel icloud when my resend the message does not appear anything and I can not activate the device

    I've forgotten my password on icloud when i resend the message does not appear anything and I can not activate the device  
                     any one help plz :'(

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPod Touch User Manual for iOS 5

  • Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it?

    Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it

    it's not under "internet and wireless" in system preferences?

  • I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?

    I upgrate my iphone from 4S to 6, but my old apps does not appear on at, how can I get them back?

    Did you restore your 6 from a backup of the 4S?
    ~Lyssa

  • HT1923 itunes does not recognise CD's uploaded ,    can't connect to server it states  ,

    itunes does not recognise CD's uploaded 
    can't connect to server it states
    although PC is connected to the internet itunes can't find the connection 
    have an ipod nano
    this is complicating things as I can't change what's on the ipod either

    Try a hard reset by pressing the Home button and Wake / Sleep button at the same time, keep them both pressed until the Apple Logo appears on the screen.
    This does not lose any data on your iPad.

  • Epson r800 prints, but does not appear in Printer List: can't use Utilities

    My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
    iMac   Mac OS X (10.4.9)  

    For your Epson try this:
    Hard Drive, Library, Printers (folder), Epson folder,
    Inkjetprinter folder, Utilities folder and here you
    will find Epson Printer Utility2. Click on it and it
    should work.
    Note. Epson utilities will not work unless the
    Printer is directly connected to the computer.
    Had the same issue with my 2200 photo and the above
    worked.
    Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

  • Cannot forward email message. Contact list does not appear to select. Can reply to sender only

    When trying to forward an email message, the contact list does not appear. It can
    only be forwarded by entering addresses manually. I can return an email by replying
    but I cannot forward under the Mozilla Fox server.
    When I am in Internet Explorer I can utilize the email forward without a problem.
    Contacted AT & T to see if it was their problem, since I use att.net.
    The technician stated it was a problem with Mozilla because it was not compatible
    with the AT & T net work. It could possibly be in recent updates, since I just
    discovered the problem within the last week.
    Would prefer to enter my email through Mozilla Fox. So can you solve this problem
    for me.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Mac does not appear to be accepting any incoming connections (firewall off)

    Hi, all.
    I've been desperately trying to get my PS3 to talk to my Mac with zero success. I've tried a large range of software, from Twonky to MediaTomb to PS3MediaServer to EyeConnect and to MediaLink. All fail to recognise the PS3, and vice-versa.
    Firewall is turned off, router appears fine (seems to work with other computers on network), but the problem persists.
    The apps listed above are not the only ones which will not receive incoming connections from the LAN: VNC does not appear to work, and Transmission bittorrent client is telling me that my ports are on 'stealth' (though this could be a router issue).
    If you think it may be a router issue, my router is a DG934G router provided by Sky Broadband.
    I've recently re-installed the OS (harddrive failure, replaced), but the problem won't seem to budge.
    Thanks very much in advance. I look forward to hearing your insight and wisdom.

    tbotn wrote:
    nerowolfe wrote:
    William Kucharski wrote:
    You must have a third party application or some startup files in place that specifically enable ipfw on your system, as the firewall in Mac OS X Leopard no longer uses ipfw. (ipfw still exists, but you must configure and start it manually.)
    Could you have set up ipfw in a non-standard way on Tiger and those scripts are still being run now that you're using Leopard? Have you set up ipfw using a third-party app
    Good catch. I suspect that this is the problem.
    Not being extremely familiar with ipfw, would the command
    sudo ipfw disable firewall
    do the trick?
    Or at least verify that it is or is not the issue?
    Hurray! My faith has been restored in all things networked! The command "sudo ipfw disable firewall" seemed to do the trick.
    I've just tested Twonky and VNC, and for the first time ever, they're working! Next is to try streaming to the PS3....
    Thank you all
    Actually the real credit goes to William who discovered the problem from your log report. I merely followed up on his surmise and posted the firewall off command for you to try. However, the important thing is that your system is now working properly, which, after all, is the primary purpose of these forums.
    Enjoy

  • HT201263 cannot download latest itunes, screen shows apple logo, slider does not appear, battery doesn't charge, cannot connect to itunes...

    unable to restore/reset/connect to iTunes. Apple logo/low battery, slider does not appear....HELP!!!!!!!!!!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Printer Pool does not appear in Available Printer list

    I run a school lab with 35 iMacs in it. We have 2 network printers. I am trying to set up a print queue on our XServe to pool the printers so that jobs will go to whichever one is free/not out of paper/etc. I have successfully set up queues for the individual printers and I have created a printer pool, which I set as the default queue.
    The problem is that when I look in the students' available printer list, all I see are the queues for the individual printers and not the pool. How do I make the pool appear so that I can set it as the default printer for the students?
    Thanks in advance.
    Nancy

    Apparently, that is how it is designed.
    http://docs.info.apple.com/article.html?artnum=302768

  • After installing Adobe Version X Pro, I still cannot "create" a PDF package from Excel since the Adobe add-in does not appear after installation.  Can someone provide their inputs?

    I'm having issues with getting the Adobe add-in to appear after installing Adobe Version X.  Version XI works but it is not compatible with another software my company uses so we have to stick with Version X.  Please help.

    Make sure your Acrobat X is up to date. 10.0 will not do this, 10.1 is supposed to. Compatible web browsers and PDFMaker applications

Maybe you are looking for

  • Check VI type for call by reference node

    Hi Ppl, I'm calling a set of VI's dynamically using call by reference node. And I have a type specifier linked to a particular type connector pane. But at times when the VI prototypes do not math I get error from the open VI reference node. Is there

  • Exchange rate error in PO creation

    Hi, I am trying to Purchase order PO so that time i am facing error as i have configured in OB08 and OBBS maintain the exchange rate type M for USD and INR. but still i am facing error, please guide me to resolve this issue. Enter rate USD / INR rate

  • The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

    The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

  • Add PayPal Button to basic form on submit?

    I have a page at http://www.canlaw.com/domains/post.html which permits people to pay by paypal But I do not see how to combine paypal with a simple submit button when filling out a form Suggestions? Thanks Kirby

  • Unable to connect laptop with Windows 2000

    I have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection. Any suggestions would be apprecia