Mighthy Mouse Issues with security update.

I just installed security update 2009-006 on my MAC BOOK PRO about two days ago and my wireless mighty mouse stoped working, I know the mouse is fine because I paired it with two other MAC laptops that dont have that update installed yet, I have not been able to fix this, I'm trying to uninstall the update to see if that will do the trick but don't know where to uninstall.
Please help.
Thanks

Try posting over in the Bluetooth Keyboard/Mouse area - http://discussions.apple.com/forum.jspa?forumID=1002

Similar Messages

Bootcamp issue with Security Update 2014-005.

My MacBook Pro with Bootcamp won't boot in Windows 8.1 mode after the recent Security Update 2014-005. Any suggestions on how to diagnose and repair the startup.
I am using a MacBook Pro (13 inch, Mid 2012) with a 2.5 GHz Intel Core i5, 4 GB 1600 MHz DDR3 with a Macintosh HD.

Keiths-MacBook-Pro:~ $ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                250.0 GB   disk0s4
Keiths-MacBook-Pro:~ $ diskutil cs list
No CoreStorage logical volume groups found
Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 486812704      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
487222344    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
488491880       1176
488493056 488280064      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header

Issue with security updates not installing

Looking at ZCC it shows that it installed successfully, but looking on the device in the state file it shows that the patch is not detected. Ran a zac ps, nothing happens.

Fishoil,
have you looked at the device itself to see if it's installed/ Has it
rebooted since installing?
Shaun Pond

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Wacom or Bluetooth Mouse issues with most recent Beta??

Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

Why ship Google Chrome with security updates to Flash Player

I do not want it, I will not install it, it wastes time downloading. Stop sending it to me.

I remember the European Competition authorities made a judgement against Microsoft for only shipping Internet Explorer with Windows. How can you only ship the Chrome option with Adobe updates, why do you not give users the option to download other browsers?
Regards
Chris Fearn
Date: Fri, 9 Nov 2012 19:32:33 -0700
From: [email protected]
To: [email protected]
Subject: Why ship Google Chrome with security updates to Flash Player
    Re: Why ship Google Chrome with security updates to Flash Player
    created by Chris Campbell in Installing Flash Player - View the full discussion
I understand. If you remember in the future, please uncheck the "opt out" checkbox before initiating the installer download. http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-4836417-253139/450-316/11-9-20 126-31-29PM.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4836417#4836417
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4836417#4836417
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4836417#4836417. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Serious mouse issues with GTK

my mouse and touchpad for my laptop have always worked without any sort of problem. i recently switched to openbox from gnome and it's been a wonderful experience so far. i tried cleaning out unnecessary gnome stuff and installed KDE to toy with it a little. needless to say shortly afterwards i ditched KDE and switched back to openbox, only to discover my mouse being screwed. i can move the cursor around and such but after a few seconds of running my ability to click and right-click is gone. i tried re-installing gnome completely hoping it might effect it and logged into a gnome session instead but the problem is persisting here as well. if i am using my mouse in a window, i cannot select anything on the panels with it whatsoever without repeatedly right clicking in the window close to the panel and then clicking the panel. and whenever i have the panel selected i can interact with it fine but cannot switch over to any windows. it's making me believe there's something going on with the mouse thinking it's "stuck" on the panel or window so clicking outside of it is rendered useless. i really don't know, i've tried searching online and such for any help on the topic but could not find anything and this is my final resort before going completely mad. any help would be greatly appreciated.
EDIT: i've tried toying with settings in gnome in regards to the mouse and stuff, basically just doing anything i possibly can and while using a window from the control panel for the mouse and clicking within it i started opening a ton of control panel items (appearance, etc.) leading me to believe it's definitely an issue of the mouse being stuck in a window or something.
Last edited by hustletrees (2010-07-01 04:11:28)

Your mouse is handled by xorg, so you need to make sure it's configured correctly. "mouse issues with GTK" simply doesn't make any sense.
My guess is that somewhere in the middle of changing WM/DE, you also did a system upgrade (a good thing) without reading Arch news (a bad thing), so you now have xorg 1.8 and you need to change your config accordingly.

Thinkpad X1 Mouse Issues with USB 3.0 Dock and WIndows 8.1

I have a new X1 (3444-CUU) that I recently upgraded to Windows 8.1. When I connected to the Thinkpad USB 3.0 Dock, there was an automatic updated of the firmware on the docking station.
Everything seems to be working except issues with my Keyboard and Mouse.Periodically, the mouse will disappear of the keyboard will simply stop working. Most recently, it was as if the delete key was stuck causing it to delete all my email (actually a feature I liked but unfortunately, can't allow).
Is there a known issue with wireless keyboard?

I have a possibly similar issue that seems to be related to the keyboard dock. In my case this is with logitec unified receiver, but what I found may help you narrow the issue's root cause.
I found that after a reboot, the dock's USB ports (bothh SS or USB 3.0) will not recognize logitech's unified receiver. Even though it is Windows reporting it, it seems to be related to the hardware. What I do to have minimally invasive 'functioning' system is to undock the Helix (use as tablet). This makes the genuine USB 2.0 port of the tablet accessible. I then plug the receiver into that port and wait until the mouse is recognized. Then remove the receiver, re-dock the tablet on the keyboard dock and plug the receiver into the dock's usb 3.0 port. Then everything works.
That seems to somehow circumvent part of the refreshing of the USB connected devices and allows them to work correctly.
I wonder if that addresses your issue. Of course I am opening another thread and ticket with that issue (will post a link after that)

PHP/MySQL issue after security update 2010-005

Hello,
I run Apache/PHP/MySQL on my MBP for testing Web sites.
After the 2010-005 security update I can't connect to my databases anymore.
I don't know how to fix this, I even don't know where to start looking.
Ideas, anyone?

coloma wrote:
etresoft, thanks for sharing this ... I decided to go with the TriangleJuice suggestion instead for two reasons ... first is that I wasn't sure where to find this launchd file.
There is nothing wrong with TriangleJuice's suggestion. My only issue with creating a php.ini file is that now I have to worry about all those other settings in the ini file. If something else in PHP breaks, I have to figure out if I am the one who broke it.
Apple ships MySQL with MacOS X Server. They probably adjusted the PHP settings to match how they have MySQL setup in MacOS X Server.
For MySQL's, no, Sun's - drat! no, Oracle's part, they still haven't acknowledged the fact that Apple has shipped MacOS X 10.4. MySQL still ships with a Startup Item. If you don't know where the launchd file is, it is because you don't have one. You probably have a MySQL entry in /Library/StartupItems or maybe /System/Library/StartupItems. Startup Items were deprecated in 10.4. Oracle should be creating a file named com.mysql.mysqld.plist in /Library/LaunchDaemons.
Here is what mine looks like now:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.mysql.mysqld</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/mysql/bin/mysqld</string>
<string>--socket=/var/mysql/mysql.sock</string>
<string>--basedir=/usr/local/mysql</string>
<string>--datadir=/usr/local/mysql/data</string>
<string>--user=mysql</string>
<string>--log-error=/usr/local/mysql/data/Pele.local.err</string>
<string>--pid-file=/usr/local/mysql/data/Pele.local.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
I also don't have a /var/mysql directory and wasn't sure whether I should just create one or if this meant my configuration was different. If you feel like explaining any of this, I'd be curious to know.
You have to create one. Such a directory probably already exists on MacOS X Server. Just make sure it is owned by mysql.
sudo mkdir /var/mysql
sudo chown _mysql:staff /var/mysql
sudo chmod 0755 /var/mysql
[jdaniel@Pele:516] /var $ ls -al /private/var | grep mysql
drwxr-xr-x 3 _mysql staff 102 Aug 26 20:03 mysql
Of course, /var is a symbolic link to /private/var. Long story there.

I got a mouse issue with Photoshop.

When trying to use the brush or any tool, the tool doesn't Hold drag. Clicking and holding to use the brush only creates the initial mark (dot). I have a MacBook Air and Photoshop Elements 11. I searched on the internet and people say its got to do with a program named Synergy but I really do not know. Hope you can help me.

Hi,
We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
In the meanwhile, you have two options to work around this problem:
1. Option1: Use a mouse instead of the trackpad
2. Option2: Install a plug-in which should workaround the problem
Plug-in installation instructions:
1. Close Photoshop Elements
2. Download this zip file to a location you can easily find (e.g. your desktop)
3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
• For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
• For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
Hope this helps!
Regards,
vaishali

Anyone updated system running OS X Server 2.2.2 with Security Update 2014-001 (Mountain Lion)?

Has anyone updated your system running OS X Server 2.2.2 with the Security Update 2014-001 (Mountain Lion)? If you have, may I know if you have any issues?
Also, does anyone know if a Apache HTTP module that was compiled with version HTTP 2.2.24 will work under HTTP 2.2.26 (updated by Security Update 2014-001)? I am asking because the module mod_jk.so is not available in the stock Mountain Lion but only in /Applications/Server.app/Contents/ServerRoot/usr/libexec/apache2/ (inside the OS X Server 2.2.2 app), and I am using the module for my Tomcat installation interface to HTTP server.

Actually, the university I work for is having tons of issues with our Mountain Lion computer (all models) booting and it seems to be tied to this update. After installing this update, the computer starts booting, gets to the grey screen with the Apple logo and then won't go any further and the cursor changes to the spinning color wheel thing. A permissions repair resolves the issue temporarily, but it always seems to come back.

ClamAV and DNS Failure with Security Update 2010-005

Hey everyone, got a bit of an issue.
I'm running Leopard Server 10.5.8 and I've noticed a very odd issue with the latest security update, (2010-005).
Since the update, whenever ClamAV goes out to check for new definitions and database updates, all of my DNS clients lose connection during the few minutes that it's working. I've verified this by watching the logs as the updates happen. Everything is fine, and the second that ClamAV starts running, DNS fails on all the clients, then starts again after the update process.
Anyone else notice this? And more importantly, how should I go about disabling ClamAV, since I don't run a mail server off this particular server.
Thanks!

The System Info below your post indicates that you are running OS X 10.5.8. The FaceTime Beta requires a minimum of OS X 10.6.4.

802.1x issues PEAP +Security Update

This is the error I get when I try to join our network with PEAP authentication. I cannot seem to find out what this means. It has worked before; however, ever since the last security update I have not been able to connect.
2006-12-12 15:03:35.133 Internet Connect[239] Error: Unable to join 802.1x wireless network 88001000!
So I was thinking that it might be the network issue. So I took out my old TiBook with a Aria Extreme card and it hooked up with no problems. I also tried it with another Macbook Pro and it was unable to connect also. I'm sooooo lost.
~D

I have been having similar problems on my MBP C2D recently. My iMac C1D gets about 12mbps on the same wireless connection where my MBP gets about 500kbps. They are both connected to an AirPort Express connected directly to a cable modem.
At home today, on my MBP I have been having problems connecting to the internet and staying connected. When I am connected it is very slow. This is on a d-link modem.
I first noticed these problems after installing the airport update and bringing my MBP to my uncles, getting around 500kbps on a linksys wired/wireless router.
2 of these 3 networks have passwords, (the last one I talked about didn't)
MBP 17" 2.33GHz 2GB, iMac Core Duo 17" 1.83GHz 1GB Mac OS X (10.4.8)

Standby issues following security update

After installing the recent security update, my iBook now insists that I restart it every time I open it up from standby. Whenever I close the lid and re-open it, I can't carry on from where I left off. I have to restart. It's annoying, does anyone have this problem or a solution?

If after installing Security Update 2007-004 on OS10.3.9 and after waking from Sleep you experience a kernel panic notification (black pane) to reboot with the power button ......... do the following:
Reboot .... then apply /App/Utilities/Disk Utility/Repair Permissions .... shut down .... Reboot while holding down Command-Option-P-R keys together until the computer chimes three(3) individual times ... release keys to complete reboot .... Repair Permissions again ... click the soft Restart .... Sleep the computer then wake it up .... the kernel panic pane should be gone.
It worked for me and I never before had a panic pane on a 15"FP iMac!
P.S. If after the above you still have Airport issues (you probably have the Airport "b" card), go to /System/Library/Extensions and delete all BUT the latest Airport Extension (check by DATE, not the version number).
DIXIE
15"iMacG4/800/60GHD/768MB-12"PB/867/60GHD/1.12GB-G3/400/1GB Mac OS X (10.3.9) AE network

HT1222 Has Apple acknowledged the problems with Security Update 2012-001?

I've read a multitude of user forum comments about this update breaking user software, but have not found a single comment by an Apple representative.

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Mighthy Mouse Issues with security update.

Similar Messages

Maybe you are looking for