MIGO for pipeline material

Hi,
I am trying to post MIGO for pipeline material, while at the same time I am facing following problem while executing:
1. At the time of the Goods Issue of the Pipeline material, the error ocured: Account determination for entry INT GBB _____ VBR not possible.
So maintained an enntry for the same in the OBYC setting, but received a new error: period 001/2005 is not open for a/c type S & G/l A/c 790000
Thus tried to solve it by going in FS00, but change authorisation was not available.
Please help me in coming out of this
Thanks 
Ritesh

Hi,
Now Use t.code: OB52 and open current period in Account Types  S and specially Account Type “+” which stands for valid for all accounts type and save( also can check A, K, D,M,). Better consult FICO consultant for OB52 step.
Also Check in T.code: MMRV and see which period is open for ur Co.Codeand back posting is allowed or not.In MMPV close the period last period and automatically system open the new one.
Regards,
Biju K

Similar Messages

  • While doing MIGO for a material we getting error as?

    Hi,
    While doing a MIGO for a material we are getting a error as ''special stock o of a vendor doesnot exists"
    Thanks
    KK

    if you are following subcontracting process then do following
    Transfer material to vendor by Mb1B or MiGO transaction with movement type 541 ( you can also use ME2O)
    Then do GR, This error will get solved

  • Quality check for Pipeline Material

    Hi MM Guru's
    Is it possible to do quality check for Pipeline Material?
    If yes what is the process.
    Thank you
    Venu

    you can create a manual inspection lot, analyze a sample and record the results.
    but you cannot have a quality stock and do not do a transfer posting from quality to unrestricted or quality to blocked.
    There a many chemicals that are transported via pipeline and managed as pipleline materials, either supplied by a supplier in the neighborhood or even cross country. And it is needed that you want do quality checks on certain materials before you use them.
    Search the QM forum, you may find some discussions.

  • How to assign the vendor for Pipeline material like Oil,power etc.

    Dear All,
    Can anybody tell me , how tp  assign the vendor for Pipeline material like Oil,power etc.

    Dear,
    Create source list ME01 maintain vendor here if vendors are multiple.
    Create Info record ME11for vendor and material combination
    Regards,
    R.Brahmankar

  • Sales order for pipeline material type..

    Hi All,
    How can we raise the sales order for pipeline material..
    Is schedule lines will be there for the sales order raised for pipeline material???
    Rgds,
    Pavan

    Hi
    Seems you working on  IS Utilities, please corerct if Wrong and if I am wrong to guess you are working on IS Utilities then the next story dosn't make any sence.
    PIPEline material type is used for Materials such as oil, power, or water that flow into the production process directly from a pipeline, line, or other type of conduit. Since pipeline materials are always available, they are not planned.
    To answer specifically what you asked would be as follows:
    1. The fact that material type is PIPE from an SD standpoint is irrelevant
    2. lets consider your PIPEline material is power, your UOM should be Kilowatt hours and establish price for it.
    3. "deliver" the material and bill it.
    However, taking the whole business context of sale of electricity into account why you want to sell PIPEline material without using IS Utilities. Typically electrical utiltity requirements have some unique challenges not easily met by SD:
    1. Amount to be billed to the customer is from meter readings.
    2. The bill to the customer ( at least in North America) is not so much of an invoice as opposed to statement of accounts that includes meter readings, consumption history etc.
    I will suggest to look into IS Utilties first before getting into SD.

  • Po for pipeline material

    Hi guys,
    Can we create a purchase order or contract for pipeline material?

    Hi,
    Pipeline material is a material that flows directly into the production process from a pipeline (for example, oil), from a pipe (for example, tap water), or from another similar source (for example, electricity). A material from the pipeline is always available; i.e. it can be withdrawn from the pipeline at any time and in any quantity. Consumption of the material is settled with the vendor on a regular basis
    1. Cretae Pipeline material with material type “Pipeline”
    2. Cretae Source list,
    3. Cretae Info record and maintain Price,
    po etc is not genrated u can directly do the good issue
    The Accounting Generated After GI/Settlement are:
    1. Goods Issue
    Consumption A/C: DR
    A/c Payable For Pipeline : CR
    2. Pipeline Settlement
    A/c Payable For Pipeline : DR
    Vendor Account A/C: CR
    Reward points if helpful,
    Regards,
    Archit

  • Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

    Hi friend,
    i have issue regarding mandatory  self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
    i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
    Regard's,
    shaikh Khalid.

    Hi Shaikh
    First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
    Nabheet

  • Info Record creation for Pipeline Material

    Hello,
    I am having issued while creating the Info records for a Pipeline Material(water)
    This is the error.
    "Material XXXX not a pipeline material" where as I have created the material as a Pipeline.
    I have Info Record created previously for other plants within same Porg and CC.
    Need the Info record in the Process Order where it does not allow to confirm the Order without the price that comes from Info Record
    Can anyone tell me what is the issue?
    Thanks
    SAP Fans...

    Hi,
    Confirm that the material XXXX is created under material type "PIPE"
    check for the material type in T code OMS2, whether "Pipeline mandatory" is active. And under "Quantity/value updating" option "Quantity updating" and "Value updating" should not be active.
    Hope it helps..
    Tx
    Uts
    Award f helpfull

  • Re: Quality Certificate requirement At MIGO for raw material

    Dear all,
    I have a requirement where I want the system ask for Quality certificate while doing the goods receipt. The system should not allow me to process the transaction-MIGO if certificate is not recieved.
    Please advice
    Regards,
    Vivek Sharma

    Hi Vivek,
    You need to perform following settings.
    Configuration
    Follow the path
    Run trx QCC0->QM in Logistics->QM in Procurement-->Define Control Keys.
    Here create your own control key
    Where you can set the rest data as per your requirement but for to check the check box for "Cert Required" is must be activated to meet the requirement relevant to this thread.
    Save
    Say you have configured your Control Key ZZ01
    Now just below this one small configuration is mandatory is Run trx QCC0->QM in Logistics->QM in Procurement-->Define Keys for Certificate Processing
    Maintain Description
    Execute it and go to "Define Certificate Types"
    Here either for your relevant certification type or  for new type (if you wish to create new), maintain the data as below
    "Certificate Required for Each Purchase Order Item" ==== Active
    "Certif. per GR Item" ==== Active
    "Certif. check required" ==== Active
    "Control W/O Certif." Set any error message, I would suggest to select "Without lot error message, with lot error message"
    "Enhanced cert. processing" ==== Don't Activate
    "No certif. confirmation at GR" ==== Don't Activate
    The rest settings are not important to maintain so leave them blank.
    At Master Level
    In QM view of MM for the material maintain "QM Control Key" that just created "ZZ01"
    and the certificate type that is just created or amended. under the procurement data.
    Maintain Q-Info record for Material - Vendor - Plant combination (QI01)
    Now as per your requirement system will ask for the confirmation for certificate receipt as Yes/No. under the Purchase Order data in MIGO at item level data.
    If you select "NO" to it it will not allow to post the GR.
    I hope this is what you were looking for.
    Regards,
    Shyamal

  • Goods Issue for Pipeline material

    Dear All ,
    Can anybody elaborate that, How can we do the consumption 261 for the Pipeline material like Gas.???

    Hi girishprasd
    Refer to the following links:
    http://help.sap.com/saphelp_46c/helpdata/en/fd/45c3fe9d6411d189b60000e829fbbd/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/fd/45c44c9d6411d189b60000e829fbbd/content.htm
    Regards

  • Default Movement for Pipeline Material (261 P)

    Hi PP Experts,
    I would like to default the movement "261 P" upon entering the goods movement part in COR6N (process order confirmation). Right now, when I enter the transaction, only movement 261 is defaulted. I still have to click the button "Stock Determination" just to get the default vendor and special stock indicator P.
    Is there a quicker way to do it?
    BTW, I already 1) created a pipeline inforecord 2) defined the material in the source list 3) assign a stock determination group for pipeline withdrawal.
    Hope you guys can help. Thanks!
    Regards,
    Marvin

    Dear,
    While create the process order you need to define it as a Pipeline material in through Special stock indicator as 4 in componenet (Material ) screen then it will get default in Confirmation.
    Regards,
    R.Brahmankar

  • MIGO for Excisable material without entering Excise details in MIGO

    Hi Gurus,
    My Client purchases one material on which he is paying excise duties such as BED, E Cess etc. But actually he receives tax invoice some times after few days of  receiving goods from vendor. At the time of receiving goods , client get only a note from vendor  stating only quantity and no taxes are mentioned on it. How to do this Goods receipt. After that vendor supplies tax invoice,and we need to enter tax/ excise invoice number details .currently system is not permitting me to do MIGO without entering excise invoice number and date. How to do this. Please tell me.
    2. my another Question is what is the flow for purchasing or Raw and Capital goods incluidind excisable material.

    Hello,
    You can do Goods receipt and excise caturing/posting in different trasnactions.
    1. First you do goods recepit and on excise tab you just select Only part 1 entry for materials which are excisable ( PO with excise duty )and for materials which are not excisable (PO with out excise duty ) you can select no excise.
    2. For PO with excise duty - you can capture and post the excise in J1IEX transaction.
    Regards,
    Shailesh

  • MIGO for Exciseable material..?

    Hi all
    Can any body tel me , i have created PO with exciseable material, and while doing MIGO under excise tab i m not getting the below things
    1.Capture and post excise invoice
    2.Only capture Excsie invoice
    3.Refer only excise invoice
    4.Only part 1
    5.No excise duty
    The above configuration setting where to do ???
    For for some PO, only few are coming , how come , there is any configuration setting materials type wise or vendorwise or chapter id wise or vendor wise ..??
    Thanks
    SAP-MM

    hi Sujoy
    Thanks for ur quick response
    I have checked in Excise group setting and it has been not ticked .
    I think i can mark tick in all boxes lik
    EI capture
    Post EI in MIGO
    Duty differenc at GR
    EI create/RG23D selection
    Update RG1at MIGO
    And more query , what about other thins lik ,
    Refer only exciseinvoice ..??
    Only part1 ..???
    Noexcise entry..???
    Can u tel me wht are the configuration setting has to be done ..???
    Thanks
    SAP-MM

  • Allow mov type 261 and 262 for a material type only

    Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
    User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
    No any other movt type allowed for this material type while issuing material.
    All suggestions welcomed.
    Regards,
    Rakesh

    Thanx amit.
    But same user uses all other movt types for other material type also.

  • Capture of excise invoice in MIGO for depot

    Hi,
            We have one depot plant as per regular process we do the GR with MB01  and then J1IG  for capturing of excise duty which update the RG23D entry,  now i want to know  what is the difference  if we do this in MIGO  so that both this can be done in same transaction I try in development server by first selecting the check box for capture excise invocie in MIGO   for the depot plant then made one entry in MIGO  but found that the field SHIPFROM in table J_1IRG23D  is coming blank when done with MIGO  so is there any differecne in thos two J1IG and MIGO create RG23D entry  aslo the vendor from which we are purchasing the material is also a trader who is passing the excise duties which they paid  and the same amount we have to split in MIGO  but I have not found the MRP indicator in excise ->misc. tab in MIGO.
    regads,
    zafar

    Hi,
      Can you help on this,  I am not getting the MRP indicator in MIGO  for the material,  what settings are required for this   the J1ID  the vendor is selected as first stage dealer.
    regards,
    zafar

Maybe you are looking for

  • Using custom classes that are not beans

    Hi folks, Is it possible to use java classes that are not beans. I mean, on a page, could you say Customer cust = new Customer("Jones", 25); if you had a Customer class with a constructor that took a name and age (String and int). If so, how do you g

  • IAS9i with Portal3.0 on RH 6.2 Linux

    Hi, I am installing iAS9i and having problems with the Oracle Portal Configuration Assistant. It goes all the way through the install, and returns a message that errors were detected in the post-installation check. -The SSOHash has not been loaded in

  • Need help on doing full import but expluding SYSTEM tables like REPCAT$%

    Hi! I am using impdp and want to do a full import of the source database but exclude tables (and dependent objects like indexes, etc.) owned by the SYSTEM user like REPCAT$%, AQ$%, etc. Have tried several things with no success. Need a working exampl

  • Tethering support for Nikon D4s?

    When will Adobe be providing tethering support for my Nikon D4s in Lightroom?????

  • File Distribution App?

    If my staff had iPod Touches or an iPad, is there an app that could be used to distribute reports and the like directly to them without their "input"? Just trying to think forward as this technology moves forward.