MIGO : How to identify post is for Goods Recipt of outbound delivery.
Hi,
I am working with MIGO Transaction,
My requirement is that while posting the Goods recipt with outbound delivery, If Movement type is not eqaul to 861, display a msg to change movemnet type to 861.
for this requirement I am using the BADI
MB_DOCUMENT_BADI - > MB_DOCUMENT_BEFORE_UPDATE .
My Querry is that How can I Identify that the posting is for Goods reciept with outbound delivery.
thr r three importing parameter for the BADI
MSEG
MKPK
& vm07m.
I try mkpf-tcode2 field.
but for both goods recipt and cancellation , the value of this field is MIGO_GR.
Please help me regarding identification of the same.
Hi,
Goods Receipt normally gets stored in MKPF & MSEG tables..
Regards
Kiran Sure
Similar Messages
-
Different movement types for goods issue via outbound delivery
Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
BurcuTo use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks... -
Error in customized smartform for goods recipt
Hi experts
I have created a customized smartform for goods recipt .
I have used form entry_we01 inside my zprogram and basically fetching the material document no from NAST-objky
The problem is when i assign my program in TXN NACE
it prevents the update of material document no MBLNR in the
MSEG table .
I get an express document as soon as I try to display the goods recipt stating " UPDATE HAS BEEN TERMINATED".
and although material document has been generated it is not updated in the MSEG table.
By the way this error does not happen when i use the standard driver program and standard form (SAPSCRIPT).
Please suggest a solutionHi,
Your problem may not be related with what you done in NACE.......Check for any other recent changes made in the System... -
Goods receipt against outbound delivery
Hello,
Can we create a goods receipt against an outbound delivery document?
The transaction MIGO provides an option but for some reason I am not able to create.
The scenario is the following :
Lets say there are two DCs DC1 and DC2 : both belong to different company codes.
- Outbound delivery created by DC1,then post goods issue
- Goods receipt to be done against the above outbound delivery.
Is it possible?
(I do not want to create a PO for this.)
Regards,
LisaHi Prabhu,
I have been trying to post goods receipt against outbound delivery but here is the error I have been getting :
"Goods receipt not possible for delivery 80000059: error code 4".
Is there any specific reason for this?
Here is the process I have follwed :
-Created outbound deliveries via allocation
-Picking
-Post Goods Issue
- Migo - Goods Receipt.
Regards,
Lisa -
Print GR slip for GR against an Outbound Delivery
Dear Experts,
I have a requirement as below.
Need to print GR slip for GR against an Outbound Delivery in VL02N (for Return Orders)
What setting needs to be done?
I donot see the GR slip check box in VL02N which normally exists in MIGO
However, i need to print GR slip for such GRs in VL02N
please help
regards,
ShettyRe: Printout during Goods Receipt
See second, fourth reply and final post (which you've already found answer to via another thread).
Regards,
Nick -
STO AUTOMATIC GOODS ISSUE TO OUTBOUND DELIVERY
Hi,
I'm trying to automate the posting of a GI to a outbound delivery and can't find where in config to make the relevant setting. We are using the two step procedure and have automated the creating of the delivery but still require the GI to be posted.
Thank you for you assistance!!
Regards
Craigcreate a variant for VL10B and the n schedule a job for abap RVV50R10C using this variant.
Sorry, that was the wrong info:
Correct way is
create varaint for VL06O and then schedule job for abap WS_MONITOR_OUTB_DEL_GDSI
Edited by: Jürgen L. on Jul 8, 2008 1:29 PM -
Goods Issue against outbound delivery from blocked stock
Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish KumarHi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$ -
Bapi to be used for delivering data of outbound delivery to LDL
Hi,
I am new to ABAP development and I need to do some enhancements for standard bapi BAPI_OUTB_DELIVERY_SAVEREPLICA .
I have to use bapi for delivering data of outbound delivery to LDL.
I have created segments with additional fields for order header and item header in we31.
The additional fields should be implemented in created segments.After creating segments the additional fields data should be assigned to Idoc structure OBDLV.
This is the requirement I need to deliver by tomorrow.Please help me by providing step by step procedure and how to do?
Thanks in advance
RajDear Venkat,
for cancelling GI/GR you may use BAPI_GOODSMVT_CREATE with GM_Code 06
for cancelling confirmations you may use BAPI_PRODORDCONF_CANCEL
Regards, Andreas -
How to remove download warnings for good?
I don't need the OS to tell me that I am attempting to open something that I've downloaded from the internet. Please, someone tell me how to make this "feature" go away for good.
http://www.macosxhints.com/article.php?story=20071029151619619
http://mac.softpedia.com/get/System-Utilities/Unquarantine.shtml
charlie -
In Settings > Facebook, I have Calendar set to "off". In Calendars, I have FB birthdays unchecked. For some reason, it seems to default back to including FB birthdays in my calendar and I don't know how to set it to "off" for good.
I don't want to unsynch FB because I have a lot of contacts whose information I want, I just don't want the constant birthday reminders.If you feel you have been ripped off, you should take the matter up with
the person who sold you the iPhone. Perhaps Amazon can assist since
the iPhone was not correctly described. -
How to identify default version for a process in 11g EM Console
Hi,
In 10g, we had a "star" next to the default version in the bpel console to identify the default process.
How does it work in 11g...how to identify the default process quickly.
Thanks,
Amitok..i got something...want to know if this is the best method..
if one clicks on soa-infra, on the right pane, it shows all deployed composites (across partitions).
Here it is showing a small green circle just before the default version.
Is this the only way...actually i was expecting the same behavior when we select a particular partition. -
I want to delete pictures from my PC, device, everything for good. I don't want 1,000 embrassing pictures of me out there!
Delete them from the my photo stream album, as well as your camera roll on your phone. Then delete them from your computer if you imported it to your computer from the camera roll. At that point, they would only be contained in any device backup made while the photos were still in your camera roll, but could only be accessed again by restoring an iOS device to the entire backup. If you're still concerned, delete the backup(s) as well.
-
When posting GI for Non valuated material in Delivery geting error (M8147)
Hi Experts
We have a problem that we are trying to send a material from one plant in one company code to another plant in another company code (Inter Company Stock Transfer Order). The material is of type Non Valuated (So it has no valuation class). The PO Order type used and the PO account assignment category is of type saying GR Non Valuated.
Problem is in the outbound delivery (movement type 645 determined) when posting GI do we get a account determination error (M8147 = Account determination for entry 1000 GBB Z001 not possible), saying that no account could be determined.
Our understanding is that the GI for the delivery demands a Valuation, which we can not do as the material is NON Valuated.
How to set the GI non valuated for the outbound delivery, so we can avoid this error? please help
BR>
Krishna Rao wrote:
> We assigned the GL for GBB in OBY. But, still the error is coming. Is there any other setup we need to do for Non Valuated material to post goods issue from delivery?
I cant believe that the same error message is coming up after the maintenance.
you either maintained an entry at a wrong level within GBB or the message must have changed.
Make sure that you take any information of this message into account (even the spaces)
the message is certainly not like you posted here: Account determination for entry 1000 GBB Z001 not possible
the message carries 4 variables , not only 3 -
Automatic Goods Issue after Outbound delivery and shipment.
Hi,
I am working on LES part.
Could you please explain me how to do Automatic post goods issue for shipments.
(in our scenario where after outbound delivery, picking, packing shipment takes place.)
Can we use VL23 for automatic goods issue for shipments? (or igoods issue is only for outbound deliveries?)
If so what is the selection criteria for background scheduling-Variants?
Please explain me in detail
Thanks a lot.Anil,
Not sure if I understand your question, Goods Issue is posted for the delivery and not the shipment. In a shipment you can update the actual values for Planned, Check-In, Load Start, Load End etc values. A shipment can have single/multiple deliveries, you can use VL23 for scheduling a background job to do the PGI automatically, use either the standard variants or define your own variant and use that variant to schedule the job.
hith
Sunil Achyut -
Rounding while goods receipt against outbound delivery
Hi Experts,
I have an issue regarding alternative unit of measure.
Material with base unit of measure FT,ordered unit is Meters since the alternate unit of measure has conversion factor getting decimal places while goods receipt against outbound delevry.
Is it possible to round off to nearest figure without decimals.At what level means PO,delivery,GR how we can round off.please advice with customization.
Thank you very much for your help.
Regards,
Babu
9930154536it is not possible to rounding of stock while GR through customizaton settings.
abap development is required to round off the stock.
Maybe you are looking for
-
Hide Top level navigation if user assigned only one role
Hi, I would like to hide the top level navigation if user assigned with only one role. I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count. If user has multiple roles show desktop1
-
Printer won't print pictures, only text
I have an MX452 All-In-One printer. I don't do a lot of printing, and most of what I do is text. Today I tried printing a picture, and everytime I try I get a message stating that the printer is offline. The printer is NOT offline -- I know this beca
-
Oracle Database OCA Certification 11g or 12c ?
Hi Guys, I'm Solaris System Engineer with around 10 yr of exp. , I wish to work as Oracle DBA. So, I've started learning SQL and Oracle. I need your help to decide which certification version will be useful ? Suggestion are welcome. Thanks
-
IDOC (create .ido file)
Hi all: I manage inbound and outbound IDOCs procces and its run propertly. Now, I have to create an .ido file from an inbound IDOCs . Can anyone help me?. I'd create an documentation file trought WE64 and gave it to external system, but they recl
-
Dear SDN forum, I'm getting bit confused about my ADSUser, ADS_Agent and my portal ADSUser. I cant print from our portal, i get an error. When looking at SM59 -> ADS connection, it used to work (print still didnt work tho) but kept prompting me for p