MIGO Process order-Delivery completed indicator by default as "2. Set"

Hi all,
Can We have the MIGO Process order-Delivery completed indicator by default as "2. Set" instead of Set automatically by any configuration.
Pls suggest.
BR,
Subbu.

Hello Subbu,
Go to SPRO --> MM --> Inv Mgmt & Physical Inv --> Goods Receipt --> Set "Delivery Completed" Indicator
Deselect the "Delivery Completed" indicator for your Plant. Then go back & do the MIGO and check.
Hope it will help.
Regards,
Anup

Similar Messages

Delivery completed indicator for STO cannot be set!

Dear colleagues,
There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
Any help would be appreciated.
Regards,
Melih
PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

Hi,
Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
Regards,
Biju K

Delivery complete indicator set by partial goods receipt in kanban orders

HI Experts,
we recently upgraded to ECC 6 DIMP EP 6. Now for kanban production orders delivery complete indicator is set for partial goods receipt. Under delivery tolerance is zero. Is there any notes available for this issue. Manual production order goods receipt is fine.
THanks
RIjil

Hi,
Let me try and understand your scenario better. You have a production order triggered by KANBAN. You then do a GR via inventory management of a partial quantity. Would you then GR the remaining quantity?
The reason I ask is because this is KANBAN production, the bin being filled multiple times for the same trigger does not sound right. The system behavior of not expecting further deliveries (by setting delivery complete) seems appropriate.

Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL

Hi Experts,
I am using the datasource 2LIS_02_SCL for Purchasing reports and this extractor has the 'Delivery Completed Indicator'[ELIKZ] which is mapped to 0COMPL_DEL in BW. The ODS which in our system has the 0PROCESSKEY as one of the key fields. Hence there are multiple records for one PO item with different 0PROCESSKEY. However the 'Delivery Completed Indicator' is not correctly extracted. For example, for one of the PO items which are not marked as delivery completed in R/3, the records extracted are as follows:
Purch.Doc. Item( Deliv.date Pur Purc D
POD Doc             Item    Schedule Line Process Key Delivery Completed Indicator
3000000583          00001 0001               001
3000000583          00001 0001               002                X
The delivery completed indicator was set & unset in R/3. This is an issue with all the similar PO items. The indicator in not set for all the records. Is there any rule that only certain process keys should be considered to identify the indicator?.
Kindly help.
Regards,
Shilpa

Hi,
You can have more than these 3 depending on your system setup.
If remember correctly, everything ending with 1 is PO related, 2 is GR related and 3 is invoice related. So, for GR related records, look at Process Keys 1 (so you know the Line Item quantity), 2 for GR's, 12 (GR reversals or issues?), 22 (GR issues or reversals?).
Of course, with all things SAP, every system is different and you may have other keys you need to include. As someone else wrote, looking to the transaction key mapping for the movement types.
Also, you should ask the functional guys or the business (if there are no functional people) for all of the GR related scenarios for Purchasing. They should give you a list of 5 -10 scenarios on how material can be bought and brought into the system. With that list, run through each one and see what records are created and when. This will display to you how the system works and you can program based on the results. This will take a while, but will be very beneficial to you.
Brian

Delivery completed indicator wrt Mat document & P.O

Hello
why is it that at times the
"Delivery completed indicator of the material document not set "
while the "Delivery completed indicator of the purchase order item" is set.
can anyone explain the logic behind this ?
Thanks

Hi,
Delivery completed indicator in the PO is set manually at the time of PO creation.
After GR if the quantity of GR is equal to PO quantity then it will be set automatically. Indicating that you cannot expect further GR for the PO item.
Regards
Ravi shankar.

Default delivery completed indicator in MIGO

Hi ,
What config has to be done to make the delivery completed indicator in GR ( MIGO to be defaulted to "Do not set " , Right now for me its "set automatically" .
Thanks

Hi Deepa,
Check the PO item details if it has Del Completed check box already set. It is in the Delivery tab of PO item. It may be causing defaulted into MIGO.
Additional Info:
Delivery completed check box of PO doesn't prevent you to be able to process GR; it is just statistical. Even with a PO of del completed check box, you can still process GR..
Try and let me know how it goes..
Regards

Delivery completed indicator in purchase order for service item

How can I make the delivery completed indicator (EKPO-ELIKZ) in a purchase order for a service item ready for direct changes.
Per default this field is hidden on purpose for service items (according to SAP note 735404). Please inform me of customizing entry where that can be changed!
Thanks,
Johnny

delivery completed indicator only gives information for MRP ( That not consider balance qty as onorder stock), it has no control on GR, so I am not sure what you will achieve to mark it in service PO?

Delivery completed indicator in MIGO

Hi all,
During the goods receipt(MIGO), the indicator "Delivery completed" has three options : set, not set, set automatically. In our client, the default option is "set automatically" which needs to be changed to "set". Please let me know the configuration / master data to be maintained for this purpose.
thanks & regards
Chaitanya Rayaprolu

Hi,
change the settings under the menu path:
SPRO > IMG > MATERIAL MANAGEMENT > INVENTORY MANAGEMENT AND PHYSICAL INVENTORY > GOODS RECEIPT > SET DELIVERY COMPLETED INDICATOR.
here u tick off the indicator.
regards
jash

DELIVERY COMPLETED indicator for Services Purchase Order

hello experts,
i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
i have a big problem:
is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase order via BAPI or Function Module?
<i>I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER</i>.
can anyone help me?
thanks in advance,
Eliana

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

Delivery completed indicator for Service purchase order item

Want to check the PO item for services already delivery completed.
Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
What field /how to to check for a service line item in Purchase order already delivery completed ?

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

"Delivery Completed" Indicator in Purchase Order

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,

Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator

Delivery Completed indicator of Production Order

Dear Experts,
I met a problem. Our production order goods receipt is in the last operation with a automatic 101 goods movement control key.
I found that the production orde qty. is 8. And in some operation do scraping. The scrap qty. is 1. And at last Production Order goods receipt qty. is 7. So the production order should be set delivery completed. But why the delivery completed indicator can not be set by system. I need to do this by manually?

Hi,
Once a scrap is posted during confirmation, the ExpectYieldVar field in order header will be updated. So in your case it should be shown as 1-.
Check if you find the same. If not check how the scrap confirmation was posted.
If it indicates as 1-, then when you post the confirmation (Auto Final confirmation) for the last operation with 7 as yield, system will automatically flag the delivery completed indicator.
Revert if you face issues.
Regards,
Vivek

Delivery Completed Indicator Not Displaying in Purchase Order Screen

Hi,
Here clinet system has 2 document types for service orders. In one type of service order I can see the delivery completed indicator checkbox in purchase order screen & in other type of service order I am not able to see the delivery completed indicator chekbox.
I have checked the screen layout for both purchase order types & assignement of layout to both order types. In both screen layout types I found that Delivery Completed Indicator Checkbox as Optional Entry. System should display delivery completed indicator in both type of Purchase Order create/change/display screen. Then why it is showing in one type of service order and not in other type of service order.
Awaiting your reply.
Regards
Pradip

Hi Pradip,
You check the for your document type which field selectio is assigned in config
spro-MM-Purchasing-purchase order- define document types
And then go to
spro-mm-purchase- purchae order-Define Screen Layout at Document Level
select the field slection which is assigned to your document type and then go details and then double click the GR/IR and then select it as optional if it is selected as hidden.
Cheers
Chris

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

Prevent GR with the delivery complete indicator set in the purchase order

Dear friends,
During GR reference to PO, if goods are received partially and the delivery complete indicator is set, the PO line item is deemed to be closed.
However, if reference is made again to the same PO line item, GR can still be done to the item that delivery complete indicator was set.(due to there is still quantity to be received)
Is there anyway, we could prevent reference to be made to a PO line item that has delivery complete indicator set?
Thank you.
Regards.

it is by design that you still can receive material.
See SAPs explanation here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63343943a211d189410000e829fbbd/frameset.htm
The delivery complete indicator only reduces the commitment values to zero.
If you want restrict further good receipts, then you have to reduce PO quantity to equal the received quantity and must not allow overdelvivery. Further you can enter a latest GR date, which will not allow receipt beyond this date.
Locking the item will as well prevent further actions, but this should only be a short term solution, because the PO will still be considered in MRP runs and will never treated as beeing closed. And you will not be able to archive such POs

MIGO Process order-Delivery completed indicator by default as "2. Set"

Similar Messages

Maybe you are looking for