MIGRATE FROM A POWER PC G5 TO A NEW IMAC - PROGRAMS & FILE - POSSIBLE?

I recall when I migrated from a Windows machine to a MAC years back I was able to move programs & files via (probably at that time) USB.
I want to buy a new IMAC & move everything from a 4 year old Power PC G5 without having to reinstall all programs &/or manually drag & drop files.
Is this posisble?
I do have a LaCie HardDrive & have been using SuperDuper to back up everything since I had problems with ths machine months ago but I do admit I have cut down on this as I have over 700,000 files and the backups take hours & really slow machine down. Plus I notice the LaCie drive turns on even when it is not set up to do a back-up.
But mostly want to know fastest way to get everything form one machine to a new one.
There's software I have downloaded or can't find.
Thanks.

You can use Migration Assistant which will come with your new machine, or you can use an ethernet cable and drag and drop what you need, or you can reverse clone from your SuperDuper backup.

Similar Messages

How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
Format the drive info here.
Backup and restore info
https://discussions.apple.com/message/16276201#16276201

How do I migrate from a firewire backup disc to a new iMac?

The drive on my 27 inch iMac (late 2007 model) has stopped working, so I need to get a new iMac. My old iMac has a bootable backup on an external firewire drive. How do I migrate the backup to the iMac, which has no firewire input?

Connect it through a FireWire to Thunderbolt adapter.
(105833)

HT3231 Can I migrate from a power PC G4

Can I migrate from a power PC G4 to a new Macbook Pro?

Read the information in the article - Intel-based Mac: Some migrated applications may need to be updated

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

HT4796 How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users?

How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
I just dont want to have to og in and out of 2 different accounts .. Help please.
-Nina

Sorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
So, in the Finder, select Computer from the Go menu.
You'll see Macintosh HD, double-click that to open it.
In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
If you have any more confusion, please stop and ask. We'll get there.
If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc. That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
A path that starts with ~/ means your Home folder, the one inside /Users named with your account name.

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot)

Why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

Transitioned from an older G5 Pro to a new iMac. My Final Cut files are on a 2T WD external HD. When I try to boot I get a "General Error 41" and files do not load. Took the WD to the Apple Store and tried it on one of their iMacs...it works OK. Ideas?

Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?

Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W

Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

anas guellaf wrote:
it still make 3 bips before starting the IMAC.
That is another problem not related to the Mac OS X version you are trying to use.
Three beeps at startup means you have a bad ram module in the computer. Did you install the ram or did it come from another owner this way? The first problem you need to solve is the bad ram.
When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory? If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
On the bottom of the screen there should be a small door that you can remove with a small screw driver. You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules. You can then put two in (if it has four) and see if it starts without the beeps. Do that with each module so you find out which is bad. Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours. So, you need to talk to Apple and have them send the DVD for your particular iMac.

I want to transfer my Windows files from my Clickfree external drive to my new iMac. iMac recognizes the drive but won't read the files. What should I do? My PC hard drive is dead so I can't hook up my iMac to that.

I'm switching from Windows to iOS. But my new iMac won't allow me to transfer my Windows files on my Clickfree HD425 over to the iMac. It initialy didn't even recognize my hard drive during set up, so I manually went through Finder where it recognized the Clickfree drive. But my files wouldn't appear. I can't go back to my original Windows computer because the hard drive crashed, and that's why I bought this new iMac in the first place. What should I do? As a Mac newbie who was reluctant to exit the Windows world, I don't want my original babystep into the iOS world soured by my first experience.

Hi Rick, & a warm welcome!
In Disk Utility on the Mac, what Format does it say the drive is?

How do I get music from my iPhone 5 on to my new iMac?

How do I get music from my iPhone 5 on to my new iMac?

The iphone is not a backup/storage device. It simply mirrors the selected content of the computer to which it is isynced. The sync is oen way - computer to iphone. The only exception is itunes purchases. File>Devices>Transfer Purchases
You should copy everything (files/docs/music/pics/contacts/calendars/etc) from your old computer, or your backup copy of your old computer, to your new one.

I did this -- Windows 7 and Vista 1. Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. D

When I sign out of FF and want to go back in, I have to go through Task Mgr each time by deleting FF and then signing back in. I followed these directions -- Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. Delete the file xpicleanup.dat. 6. Restart Firefox. --- but I could not find Mozilla Firefox under 'Program Files'.
== This happened ==
Every time Firefox opened
== about a week ago

Where did you find those instructions to delete the '''xpicleanup.dat''' file?

Migrate from G5 Dual 2.5 to 24in Intel iMac

Hi all, could any of the Guru's here give me some advice. I am migrating my set up from a Power Mac G5 Dual 2.5 to an Intel iMac 24in 2.3. What's the best way of bringing my apps, fonts and settings across to the new machine?

I would not use Migration Assistant because you are moving from a PPC to an Intel Mac. Read the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
I would consider simply reinstalling your third-party applications. All OS X applications are universal binary versions or Intel-only versions. They should not be replaced by your older PPC equivalents.

MIGRATE FROM A POWER PC G5 TO A NEW IMAC - PROGRAMS & FILE - POSSIBLE?

Similar Messages

Maybe you are looking for