Migrating from Desktop ADI to Web ADI

Hi,
We are migrating from Desktop ADI to Web ADI. I am looking for instruction document for migration on metalink but could not find one. I could find documents for functional differences etc. But, it would be really helpful if someone could point me to technical documentation like patches to be applied and how to migrate etc...
Thanks,
-Aditya.

Hi,
Please see the docs referenced in this thread.
Web ADI Diagnostic tool in R12.1.1
Re: Web ADI Diagnostic tool in R12.1.1
Thanks,
Hussein

Similar Messages

  • Web ADI on 11.5.10.2 Issue with migrating templates desktop ADI to WebADI

    Version 11.5.10.2
    Applied patches:
    7375915
    7350414
    3036401
    5853005
    11793768
    12700905
    Migrating FSG templates from desktop ADI to WebADI. When we open an existing template, we put the template name in the file and then upload we have the following issues:
    - The template does not have headers.
    - If we change the template at all, the columns get left justified instead of right justified.
    - numeric value is showing for date and time instead of standard format for date and time.
    - Column widths are not holding.
    - Cannot get column headings to show up.

    Have you applied all pre-req. patches?
    Please see the following docs and make sure you have all the patches applied.
    How To Determine Which FSG Patches Have Been Applied In Release 11i, 12.0 and 12.1 [ID 549289.1
    Unable To Publish Report In Excel After Applying Patches 7375915/7350414 [ID 789725.1]
    UNABLE TO VIEW OUTPUT WHEN PUBLISHING REPORT SET WITH CONTENT SET [ID 827461.1]
    Unable To Publish FSG Reports When Content Sets Are Used [ID 787289.1]
    How To Use Content Sets (Parallel Types) in Report Manager to Display FSGs in Multiple Workbooks [ID 881532.1]
    FSG: Error : Content Set ID Is Not Empty And It Is An FSG Submission When Using Content Set [ID 1294149.1]
    What Are the Patch Numbers for Prerequisites for Patch 5377946? [ID 945032.1]
    Fsg Column Headers Are Offset, Date Format is incorrect after applying FRM patches [ID 834860.1]
    Thanks,
    Hussein

  • Migration from 6.40 SP20 web dynpro to 7.1 web dynpro

    Hi Experts,
    I am looking for web dynpro migration guide from 6.40 to 7.1.
    Do you know where can i find such a guide.
    Regadrs,
    Slavik.

    Hi,
    This should be useful: http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417600)ID0671235550DB11756074134833816007End?blog=/pub/wlg/7441
    Regards,
    Ashwani Kr Sharma

  • Best approach to "migrate" from BEX reports to Webi reports ?

    Hello,
    i have read lots of documents regarding best practices on how to built webi reports and universes on top of BW.
    But i can't find any document about best approach, not in performance way of thinking but in best way of using reports.
    i mean: when end users are coming from bex reports (where they can drill down through hierarhies and use free filters ) to webi reports (where layout is quite beatiful and user can change it easely), this is not the same way of consuming reports.
    I come from BO world and are new on reporting on top of BW.
    for me webi is good for quite static layout reporting where data is clear and available.of course you can have prompts for interactivy and more accurate reporting.  Drill down is just a functionality but is not the real purpose of the report tool.
    So ,according to me there is a gap between both tools (BEX and WEBI) but end users are the same.
    So i 'm wondering if you have any feedback for the best approach to build webi reports where end users are coming from bex reporting.
    And how to choose between prompts, drill-down (with available filters on top of the window), fold/unfold and input controls or just having diffrent levels of hierarchies in the table/ section/ breaks but without drill down (because if you drill down, report begins weird with diffrent levels) ...?
    So , if you have any feedback , advise....
    thanks in advance,
    Rgds,

    Hi,
      WEBI don't replace BEX reports, is for different audience, in fact BEX is for OLAP reports and analysis.
      You can find some answer in this page
    [FAQ: The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI & Business Objects Roadmap|FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]|FAQ]
    spercific for What is the future of the BEx Query Designer? you can read here
    [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section11] and here [FAQ - The Future of SAP NetWeaver Business Intelligence in the Light of the NetWeaver BI&Business Objects Roadmap [original link is broken]#section3]
      The idea is to use the rigth tool for the rigth job.
      You can find more information here [http://www.sdn.sap.com/irj/sdn/edw], [http://www.sap.com/solutions/sapbusinessobjects/index.epx], [http://www.sap.com/solutions/sapbusinessobjects/newsevents/index.epx], [http://www.sap.com/community/flash/BusinessIntelligenceAGuideforMidsizeCompanies.pdf]
    I hope this help you.
    Best regards.

  • Desktop ADI Question

    Can anyone tell me if you can use a custom SQL statement to populate a drop down list in a general ledger JE using Oracle Desktop ADI v.7.2? My company will migrate to R12 soon but in the meantime they would like to use desktop ADI to populate an attribute field with vendor name info supplied by custom SQL. I believe that functionality is available in web adi, not sure if its possible in desktop adi though. Any help much appreciated!
    John

    Here's what the setup should be:
    Modem→router))))                      ((( laptop
                      ↓
                    desktop
    Get a wrt54g wireless-G router. Just run the setup cd and follow the steps.

  • Create a specific request  to upload all the journaux from the ADI file

    Hello everyone,
    I'd like to create a specific request which runs in the Oracle GL par exemple, and it can import all the journaux from the ADI file.
    the objectif is to impot all the jouraux in the ADI file by a simple clic, because I have a lot sheets to imprt in the ADI file.
    Thanks a lot
    Yingnan

    Hello Yingnam.
    Upload Procedure
    To upload journal entries from a journal worksheet to the interface table:
    1. While viewing your journal worksheet, from the ADI toolbar, choose Ledger >
    Upload to Interface. The Upload Journals to Interface window opens.
    2. Select or enter upload options as appropriate.
    Table 3–4 discusses the various
    upload options for importing journal data.
    Start Journal Import (check box)
    If selected, starts the journal import process automatically after the upload completes.
    If you choose to start the journal import process automatically after the upload completes, the system will do the following:
    Submits your journal import request
    Submits a watch request to monitor your journal import request
    Displays errors in the upload to the interface table and the journal import request ID.
    Displays a message indicating that a watch request has been submitted for the Journal Import Request ID.
    I'm not using ADI anymore, but WEB ADI, and i don't think you can schedule de journal upload/import.
    Hope this helps.
    Octavio

  • Web Analysis Report Migration from 9.3.1. to 11.1.1.3

    Hi All,
    We are migrating from 9.3.1 to 11.1.1.3 we have couple of web analysis reports running on the old server 9.3.1 and now i have to migrate those reports on the new server 11.1.1.3. Reports in 9.3.1 are in windows servers and it should me migrated to 11.1.1.3 which is on a solaris server. please let me me know if you have any ideas regarding this issue.
    Thanks,
    Ram.
    Edited by: KRK on Sep 29, 2009 8:56 AM
    Edited by: KRK on Nov 6, 2009 12:53 PM

    Hi Vijay,
    I have checked migration utility inversion 9.x basically this migration utility is compatible for reports from version 7.x to 9.x and it is not supported for reports from 9.x to 11.x ....
    So i have finally fallowed a procedure.
    I have exported the reports from 9.x and imported in 11.x .
    Then after exporting i have pointed database connections to new 11.x version server.
    Now I was facing a issue when i open a reports in read only mode (i.e as a business user) iam getting a screen where it asks for database details ( I have assigned business user read access to essbase)
    Basically this reports are pointing to my old essbase server i.e version 9.x server.
    Please let me if iam missing something while exporting and importing reports.
    Thanks,
    Ram.

  • HT4889 Am I wrong or does Migration Assistant not work in Mountain Lion (10.8.2) when migrating from a PowerPC running Tiger (10.4.11)? Apple really needs to get on the ball or face losing people buying their new desktop products.

    The title alone speaks to my frustration about this issue.
    Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
    Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
    On a personal note...
    I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead"  as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
    I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.

    http://support.apple.com/kb/ht4889
    Migration from Mac OS X v10.4 Tiger to OS X Lion
    Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
    Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
    On the Mac you want to transfer data from, Restart, and immediately hold the T key.
    Wait for the FireWire logo to appear on the screen.  If it does not, restart and try again.
    Connect both Macs via the FireWire cable.
    On the Mac you want to transfer data to, Open the Migration Assistant application.
    Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
    Select the option "From a Time Machine backup or other disk" and click Continue.
    Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
    EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

  • Issue with Excel Access Web Part, with sites that were migrated from 2010 SP to 2013 SP

    Hello, 
    If I try to add an Excel Access Web Part to a page I get the following:
    **Note: This only happens with sites that were migrated from 2010 SharePoint to SharePoint 2013. If I create a new site the feature works like it should and loads the workbook. I've tested this on several sites, our environment is enterprise as well. Being
    that the majority of our sites were migrated from 2010, I need this to work! 

    Can you try below fix and let me know
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/05/21/excel-services-the-workbook-cannot-be-opened.aspx

  • Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

    Hi Microsoft Team,
    We need your urgent advice and that is also on priority:
    Issue Description: We need to migrate from
    WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
    under WINDOW SERVER 2008 as DEVELOPMENT BOX.
    .NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
     IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
    Need your quick advice Is that configuration feasible for Development and
    Deployment (Web Server).
    Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

    Hi,
    As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
    IIS Forum
    http://forums.iis.net/
    In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
    Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
    http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
    Best regards,
    Frank Shen

  • Migrate from Palm Desktop/OS 10.4 to OS 10.6 & new iPod Touch?

    I'm very dependent on Palm Desktop 4.2.2 to keep my life organized. My old Palm died long ago, but I like Palm Desktop more than any other alternatives I've seen. I've ordered a new iPod Touch. I'm pretty sure that, to use it with my iBook (running OS 10.4.11) that I'll need to upgrade to Leopard or Snow Leopard if I want to share info with the Touch.
    Moreover, I think I'll need to sever any ties to my beloved Palm Desktop: I don't think it's compatible with OS 10.6. I've explored similar posts, but haven't found an answer I could use or understand. So if someone knows of an online description of migrating from Palm Desktop to either the equivalent Apple products or to Google, I'd appreciate the URL.
    The main feature I like in Palm Desktop is the ability to create links between all the modules. For example, I can set an appointment with a doctor, then attach the doctor's contact information and attach a memo that has a list of questions and directions to the new office. My existing database is cross-linked between all these types of info.
    Is there any way I can retain these cross links when I migrate? Do any of the Apple PIM programs let you create these kinds of cross references with new information? Does Google or some other software let you do this better?
    From what I've read, it sounds like getting the information exported into a format that can be imported to a new program isn't easy. BTW, I'll also be migrating from Eudora to either Mail, Thunderbird mail, or some third party equivalent. I won't use any flavor of Outlook. Is there something about MobileMe that would make this migration easier?
    Can you tell that I'm operating on the very fringe of what I'm technically able to understand? I've stuck with Palm Desktop for 8 years. I'd appreciate any guidance anyone could provide -- in an easy, step-by-step way. Forgive me if this information exists elsewhere. Directions to that info also would be appreciated.
    Quickly exceeding my technological Comfort Zone,
    Marganne

    The Palm Desktop works fine with 10.6.6 (and even Hotsyncs to Palm, though I gather this is irrelevant to you). However it is dependent on Rosetta, so (avoiding speculation to conform with the terms of this Forum) were Rosetta to be removed in a future system upgrade the Palm Desktop would be inoperable.
    You're not going to be able to salvage the contents and use them in a linked fashion in the same way. It's possible to salvage the contents, though it's going to entail some work.
    MEMOS - Evernote (basic version free) is a good replacement and extremely flexible: its contents can be synced to an iPhone or iPod Touch. The contents of the Palm Memos can be imported into Evernote using the Palm Desktop Memos Importer for Evernote (free)
    CALENDARS - Palm Desktop menu File>Export and export Date Book as vCal. In iCal File>Import and import the vCal file into iCal - it will appear as an 'On My Mac' calendar. Use File>Export>Export to export this as an .ics file. Create a new calendar under your MobileMe login name (I'm assuming you've upgraded to the new MobileMe calendar) and import the .ics file into this. Delete the previously imported calendar. (If you don't want to use MobileMe just leave the imported calendar where it is.)
    You can't separate the Palm categories and you will need to go through it making any necessary adjustments.
    It's worth considering BusyCal, which is like  'Pro' version of iCal with much better handling of ToDos and many extra facilities. On an iPod Touch it's well worth considering Week Cal which, though I've not tried it, appears to be a much better calendar than the rather basic built-in one.
    TASKS - you will have to enter these manually, one at a time - it doesn't appear to be possible to import them into iCal. iCal won't handle repeating ToDos - BusyCal will. They also make BusyToDo for iOS which reads the ToDos from the MobileMe calendar and handles them separately and much better.
    ADDRESSES - you can export these as a vCard - select all first - and import that into Address Book (watch out for duplicates if you are already using Address Book).
    It's not clear if you have MobileMe: if you don't want to sync between computers or iPhone/iPod Touch you don't need it, but if you do it's the best way - Google and Yahoo have issues. However you should be able to sync to an iPod Touch using iTunes, though as I don't have this device I don't know whether there are any downsides.

  • Migration from iPlanet Web Proxy to ISA 2000

    Hi,
    I'm doing a project to migration from iPlanet Web Proxy 3.5 (AIX based) to ISA 2000 (Windows 2000). Anyone have experience can give me some idea to plan this migration?
    Which file in AIX iPlanet proxy store all the Filter URLs (Black list) ? And which file store all the users, groups with permissions?
    If you can refer me some "How to" documentation, I appreciate your help.
    Vince2008

    sriram already answered this pretty well, but as someone having been in the same situation (migrating from 6.0sp6 to 6.1sp8 a few months ago) I thought I'd chime in.
    obj.conf is not an issue whatsoever, since this file does not change in any way between the versions. This was a very nice discovery, and made our work a lot easier. :)
    magnus.conf is still pretty much the same, and using the migration tool in 6.1 will migrate server.xml and all other files properly, so that is absolutely the easiest way, if you have only a couple of configs. Us, we used it to generate a new template to see all changes, and then updated our internal configuration templates with the new look and generated all files on our own from there.
    You will need to modify magnus.conf manually afterward and update the path to the wlproxy though, since you should use proxy61.dll/so rather than proxy36.
    There are also quite a lot of entries in magnus.conf that are deprecated in 6.1, but still kept by the migration tool. Doesn't really hurt in any way, but that is my current task - cleanup.
    Regarding rollback, that depends on how you migrate. We wanted to use the same ports as well as windows service names (to avoid having to update all scripts), so we had to uninstall 6.0 before installing 6.1. But really, the possibilities you have here are so strictly decided by your network setup, uptime requirements, etc, that it is hard for anyone on the outside to answer.
    Edited by: David.Eriksson on Aug 18, 2008 1:54 AM

  • Bex Web Application Designer launched from desktop NOT SSO (single sign-on)

    NW 2004s
    BI 7.0
    The SSO from the Portal to BI/BW is working correctly, The SSO from BI/BW to the POrtal is working correctly.
    The problem is from the desktop, launching Bex Web Application DEsigner, it prompts to Logon to the BI system, then when you execute the selection it prompts you to log on to the Portal. I would expect the Portal logon to be SSO. Is there an SSO option for the Bex WAD I need ?
    Is there a  Bex tool or desktop configuration that I need to implement?
    Thanks in advance for any help
    Sarah

    Hello Sarah,
    Please refer this SSO SAP Pages
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/9f244183bb8639e10000000a1550b0/content.htm
    For Portals
    http://help.sap.com/saphelp_nw04s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/content.htm
    You can also refer this forum
    /thread/342517 [original link is broken]
    Hope it helps
    Thanks
    Chandran
    Edited by: Chandran Ganesan on Feb 6, 2008 8:26 PM

  • How to Run a Report from Desktop in Oracle 10g without using Web

    Hi Friends,
    I want to run a report from desktop (report which is developed in oracle report developer 10g), for that i have created shortcut. But when i double click on that shortcut it gives me followig error
    "Report name, database connection, and reports server name (unless using local runtime, i.e. reports server call is local) properties must be specified for successful report run"
    the path which is defined in the shortcut of report is as follow
    D:\DevSuiteHome_1\BIN\rwsxu.exe rcptreg_dt userid/password@ORC
    pls help me to sort out the problem.
    Thanks & Regards.

    Hello,
    You can use rwrun. Since 9.0.2 , it is no more possible to DISPLAY the output on the screen , but you can generate a file (HTML , PDF , RTF , ..) and then open the file generated.
    EX: rwrun report=c:\temp\myrep.rdf destype=file desname=c:\temp\myrep.pdf desformat=pdf userid=scott/tiger@mydb P_1=param1_value ...
    Regards

  • Web service issues in migrating from ColdFusion 9 to 10

    I'm troubleshooting a problem a client is having with their migration from CF9 to CF10. A webservice call that previously worked, no longer is working. When I call it from my CF10 server, I get this error:
    C:...\cfusion\stubs\WS-853189522_2...\service.java:10: class, interface, or enum expected package ...;
    The ellipses are to replace proprietary files paths and names.
    When I add the cfinvoke attributes wsversion and refreshwsdl, I get a "Unable to read WSDL from URL: .../service.asmx?WSDL" error instead of the above error. I also changed the default ws version from 2 to 1 in the CF Administrator, with no change. Are there any other known issues with CF10 that would interfere with a webservice call that worked in an earlier version?

    I found the answer, and it turned out to be quite simple. After making the change to the default webservice version in CF Admin, I needed to restart the server. It now works, although I am curious as to why adding the wsversion attribute to the cfinvoke tag calling the webservice didn't work. My concern now is that if they add an Axis 2 webservice call in the future that they may run into this problem again.

Maybe you are looking for