Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?

Hi,
we have acquired another company, and they have multiple, separate domains with the same name (every site has a domain with NetBIOS name "COMPANY" and DNS name "company.local"). Now we want to migrate all these domains into ours using
ADMT.
Unfortunately, we did not manage to migrate one of these domains completely, so the trust must remain established for some time. But we have to continue with the second domain - which normally would require a trust, but of course we can't establish a trust
to two domains with the same name at the same time.
I found two potential solutions for the dilemma, but I'm not sure if both are reasonable:
1) Rename the domain with RENDOM.EXE to COMPANY2 and company2.local and then migrate with ADMT
2) Migrate COMPANY to a temporary domain such as COMPANYTEMP and then migrate from COMPANYTEMP to our domain
Given that there are roughly 100 users, 2 domain controllers and 8 other servers, what would be the better approach? Is option 2 possible at all, so would I be able to use the sidHistory attribute migrated from the original COMPANY domain in our domain at
all?
There is also an Exchange 2007 server, which seems to make option 1 impossible unless we find another way to migrate it (like, export all mailboxes to PST before migration) ...

Ok, that's what I expected. Still, I have servers in the old domain, so if I do these steps:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
disconnect the domain COMPANY(right) ,
users will lose connectivity to any servers in the domain. I understand that it does not work with all domains connected? Of course I can't make OURCOMPANY's domain controllers see the DCs of COMPANY (right) in DNS (though I could achieve it the other way
round).
My original plan was:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from
COMPANYTEMP --> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
remove trusts and old domain
But I see that this will not work out, right? So, my only option would be:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
Migrate computers and servers to COMPANYTEMP
Install new Exchange server in COMPANYTEMP
migrate mailboxes to COMPANYTEMP
disconnect / abandon COMPANY(right)
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from COMPANYTEMP
--> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
Migrate mailboxes
remove trusts and old domain
And to minimize user impact, all this would have to be done in one go (over night), which is hardly possible .........................

Similar Messages

Multiple files with same name--- automatic renaming option??

I am trying to sort my files by adding multiple files to a single folder. However, many have the same filename, and I get the error " there already exists a file with the name "x", please choose another name" etc. I am dealing with thousands of files here that are very tedious to rename individually. Is there an option or program that either disables this block on multiple files with the same name in a common folder, or automatically renames the files as they are placed in the folder?

i would like all the files to have different names, but not have to do it myself. they are generated my my audio recorder, which automatically names files take1, take2, take3 etc. multiple sessions entail multiple folders, i am trying to consolidate.

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
          When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
          Here is the error in the log -
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
          object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
          The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
          haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
          ore servers. Such objects can only be deployed from one server.>
          Thanks
          Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
          although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

Can i rejoin ny SCVMM 2012 server to domain with same name & IP address?

Dear all..
I am in situation where i have to rejoin my scvmm server to domain with same name & ip address.one of the fool admin has deleted my SCVMM's computer object from AD. I have recreated the object & tried to log on but no luck.. i have to rejoin
the server.
Does it have any risks involved or its just fine?

Hi,
First the behavior is normal. If an computer accounts is deleted, you cannot continue using the server without rejoining.
SCVMM it's not depending (integration) on active directory in such way as Exchange.
So, if the computer accounts has been deleted, there is no issue in creating a new one and rejoin the server. As long as the application on the server is able to look up any required directory services, it should be happy again.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

How do I automate merging multiple layers with same name?

It was suggested I ask this question in this forum - any advise gratefully received!
I have to combine over a 800 files into one photoshop file. Each file has with sixty layers. The 60 layers in each file are named identically: Layer 1, Layer 2, Layer 3 up to Layer 59, Layer 60. My intention is to create a final composite file with 60 merged layers (for an animation). That is, with all the Layer 1's merged, all the Layer 2's merged, all the Layer 3's merged and so on. What I need is a script which will merge all layers with the same layer name, ie all the Layer 1s, all the Layer 2s etc (ideally without having to merge each set of layers separately).
I am using Photoshop CS6 and at present I am merging by using the find/name function, then highlighting all the layers selected and then using 'merge layers'.
Any ideas?
Best
JR

This might be close, it will prompt for a folder containing all the 800 files, it will use tif or psd files.
Once you have selected the folder sit back and watch...
#target photoshop
app.bringToFront();
main();
function main(){
selectedFolder = Folder.selectDialog( "Please select input folder");
if(selectedFolder == null) return;
var fileList = selectedFolder.getFiles(/\.(tif|psd)$/i);
open(fileList[0]);
checkBackGround();
setLayersVisOn();
for(var z = 1;z<fileList.length;z++){
    open(fileList[z]);
    checkBackGround();
    setLayersVisOn();
    dupLayers(app.documents[0].name);
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
if(z % 9 == 0) mergeSameNamedLayers();
mergeSameNamedLayers();
function checkBackGround(){
activeDocument.activeLayer = activeDocument.layers[activeDocument.layers.length-1];
if(activeDocument.activeLayer.isBackgroundLayer){
    activeDocument.activeLayer.name=activeDocument.activeLayer.name;
function twoOrMoreSelected(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var desc = executeActionGet(ref);
if( desc.hasKey( stringIDToTypeID( 'targetLayers' ) ) ) return true;
return false;
function mergeSameNamedLayers(){
//Get a list of the layer names
var layerNameList = getNamesPlusIDs();
//create an array for unique layer names
var uniqueName = new Array();
for(var s in layerNameList){
    if(layerNameList[s][2] == "false") uniqueName.push( layerNameList[s][1].toString());
//now we should have unique layer names
uniqueName = UniqueSortedList( uniqueName ).sort();
//select all layers with the same name, merge them and set blendmode
var BlendMode = new String();
for ( var w in uniqueName){
    deselectLayers();
    for(var z in layerNameList){
        if(uniqueName[w].toString() == layerNameList[z][1].toString()){
            //select these layers and get blendmode.
            BlendMode = layerNameList[z][3].toString();
            selectLayerById(Number(layerNameList[z][0]), true);
if(twoOrMoreSelected()) activeDocument.activeLayer.merge();
        setBlendMode(BlendMode);
function setBlendMode(blendMode) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
desc2.putEnumerated( charIDToTypeID('Md '), charIDToTypeID('BlnM'), stringIDToTypeID(blendMode) );
desc.putObject( charIDToTypeID('T   '), charIDToTypeID('Lyr '), desc2 );
executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
function deselectLayers() {
    var desc01 = new ActionDescriptor();
        var ref01 = new ActionReference();
        ref01.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc01.putReference( charIDToTypeID('null'), ref01 );
    executeAction( stringIDToTypeID('selectNoLayers'), desc01, DialogModes.NO );
function UniqueSortedList(ArrayName){
var unduped = new Object;
for (var i = 0; i < ArrayName.length; i++) {
unduped[ArrayName[i]] = ArrayName[i];
var uniques = new Array;for (var k in unduped) {
   uniques.push(unduped[k]);}
return uniques;
function selectLayerById(ID, add) {
    add = (add == undefined) ? add = false : add;
var ref = new ActionReference();
ref.putIdentifier(charIDToTypeID('Lyr '), ID);
var desc = new ActionDescriptor();
desc.putReference(charIDToTypeID('null'), ref);
if (add) {
desc.putEnumerated(stringIDToTypeID('selectionModifier'), stringIDToTypeID('selectionModifierType'), stringIDToTypeID('addToSelection'));
desc.putBoolean(charIDToTypeID('MkVs'), false);
executeAction(charIDToTypeID('slct'), desc, DialogModes.NO);
function dupLayers(DocName) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var ref2 = new ActionReference();
ref2.putName( charIDToTypeID('Dcmn'), DocName);
desc.putReference( charIDToTypeID('T   '), ref2 );
desc.putInteger( charIDToTypeID('Vrsn'), 5 );
executeAction( charIDToTypeID('Dplc'), desc, DialogModes.NO );
function selectAllLayers() {
    var desc29 = new ActionDescriptor();
        var ref23 = new ActionReference();
        ref23.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc29.putReference( charIDToTypeID('null'), ref23 );
    executeAction( stringIDToTypeID('selectAllLayers'), desc29, DialogModes.NO );
function setLayersVisOn(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
try{
    activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
   for(i;i<count;i++){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ))
        if(layerName.match(/^<\/Layer group/) ) continue;
        if(!desc.getBoolean(stringIDToTypeID('visible'))){
            var list = new ActionList();
            list.putReference( ref );
            desc.putList( charIDToTypeID('null'), list );
            executeAction( charIDToTypeID('Shw '), desc, DialogModes.NO );
function getNamesPlusIDs(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
   var Names=[];
try{
    activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
   for(i;i<count;i++){
       if(i == 0) continue;
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        if(layerName.match(/^<\/Layer group/) ) continue;
        var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
         desc.hasKey( stringIDToTypeID( 'smartObject' ) ) ? SO = true : SO=false;
         var blendmode = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'mode' )));
Names.push([[Id],[layerName],[SO],[blendmode]]);
return Names;

Multiple images with same filename-how does iphoto deal?

I recently lost a several pictures from iphoto on my imac running snow leopard. I have tried multiple things with the guidance of a senior advisor from apple, but the pictures are not retrievable. I have multiple backups for many, but I lost about 20 images. Naturally, I am a bit paranoid now about the stability of the remaining photos in my 66gb library, so have made multiple backups of the entire library and plan to migrate to aperture 3 with a vault.
It just struck me though, that because we use multiple cameras with the same canon file naming scheme, I have several instances where I have multiple photos with the same filename. Is this potentially a problem, or because the EXIF info is different for each one, am I okay? If this is a problem, do any of you have any remedies? I plan on adjusting the naming scheme on our cameras for the future.
Thanks in advance!

To add to Terence's reply: the only time you might run into a problem is when you might try exporting photos with the same file name to the same folder on the HD. If that were they case you could batch rename the photo's titles with Photos->Batch Change->Titles to Text with the option to add a sequential number at the end of the file name, i.e. Text - 001.jpg, etc.
Another alternative would be to upload each new shoot to a folder on the desktop and rename them with a renaming app likeName Mangler or Renamer4Mac . I rename them with the date taken and a brief description: 2009-05-10-MomsDayBalboaPark-001.JPG. You also could add an identifier to the description to tell which camera it came from.
This method will avoid any name conflict down the line and make it easy to identify photos as to their general content when used outside of iPhoto. I've found that a little extra effort up front has saved me a lot of problems on down the line.

Server 2012 - Can't access external website from internal domain with same name. Tried everything.

Hello All.
I have read loads of forums and tried numerous fixes and configurations, but nothing seems to work and I am extremely frustrated at this point.
I have a client where I setup Server 2012 Standard with Exchange 2013. After reading best practice documentation for DNS naming and reasons not to use ".LOCAL" I opted to use ".com.na" in which case the Internal Domain Name and Internet
Website now has the same name.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view this
directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
I am so sick and tired of this issue that iI am at the point of backing up the Exchange and re-rolling the entire server with the ".local" DNS domain name. I have a mirror setup in a VMWare environment and simply using "rendom" to rename
the domain seems to cause new issues with Exchange connectivity.
Any pointers and help will be greatly appreciated.
Thanks in advance.
Hentie Loots

I opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Changing a DC in Domain, with Same name and IP

hey we have a domain with 3DC (srv1, DC Operation Master and GC ; srv2 DC and GC ; and srv3 only DC)
srv3 is a file server with many shares like //srv3/folder/myfiles
so i really want to keep the name and IP!!
my plan is to degrade the srv3 to normal server and add to a workgroup.
Delete it from ad under domain controllers. So my domain only works with my two domain controllers.
Wait 1 or 2 Days. perhaps do a manuel replication ... so be clear tat the srv3 is really removed from the domain.
And after all i would take my brand new Server give him same name and ip an add him to the domain. level him up to a dc and i hope all would be fine :)

Greetings!
Just demote the DC successfully (No Force Removal!)and check the replication between two domain controllers. If everything were in good condition you can use the same IP and Name in a new server. No need to wait for couple of days.
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Multiple Playlists with Same Name

What causes multiple Playlists with the same name or with the same name with a numerical suffix to appear?

How about turning off iTunes match. Delete the PL - then reactivate iTunes Match.
MJ

Chart creation using multiple series with same name

I'm new to Numbers and to chart creation in general, so I'm not sure if Numbers is capable of what I need. But if so, I'd like to know how...
I have a large spreadsheet with hundreds of lines of expense data, wherein each line item falls into one of a dozen categories of expense types. I would like to create a pie chart by expense type (ie, Healthcare, Automotive, Travel, etc), but Numbers wants to treat each line item as a separate expense, even though many of them share the same name. So I'm getting multiple pie slices that all say "Travel" and so forth. I really just want one pie slice for Travel, one for Auto, etc.
So how can I make Numbers calculate the subtotals for each expense type and use those subtotals to create the chart? Is there a way to do this within the chart function or do I need to create a separate table for just the subtotals (not sure how to do that either) or what?
Thanks!

It appears that I missed your question.
Here is a way to treat the problem:
In Tableau 2 column B the formula is:
=SUMIF(Tableau 1 :: B,A,Tableau 1 :: C)
The column A of Tableau 2 is a header.
Yvan KOENIG (from FRANCE lundi 14 avril 2008 14:26:37)

Multiple objects with same name when rebuilding index online

I am looking for advice on how to handle a race-condition in sql server, related to reading metadata while an online index rebuild is being performed.
The problem is as follows:
At some point we execute the following statement:
SELECT
obj.object_id AS id,
scm.name AS scm,
obj.name AS name,
obj.type AS type,
ds.name AS dataspace_name,
prop.value AS description,
part.data_compression_desc as compression_desc
FROM sys.objects AS obj
INNER JOIN sys.schemas AS scm ON obj.schema_id = scm.schema_id
INNER JOIN sys.indexes AS idx ON obj.object_id = idx.object_id AND idx.type IN (0,1)
INNER JOIN sys.data_spaces AS ds ON idx.data_space_id = ds.data_space_id
INNER JOIN (SELECT object_id, data_compression_desc FROM sys.partitions WHERE index_id IN (0,1) /*Heap, Clustered*/) AS part ON part.object_id = obj.object_id
LEFT OUTER JOIN sys.extended_properties AS prop ON obj.object_id = prop.major_id AND prop.minor_id = 0 AND prop.class = 1 AND prop.name = 'Description'
WHERE obj.type = 'U' OR obj.type = 'S'";
The statement returns some metadata for indexes (indices?), the purpose of wich is not the subject.
When executed while an online index rebuild is running, a race condition occurs: When the rebuilding enters the final phase, the new index, which have the same name, becomes visible and thus results in two rows with the same name (from sys.object). I am unaware
if this only occurs for clustered index (which is what we have observed).
We became aware of this behaviour, as we added the metadata to a .Net Dictionary using name as key, and received a duplicate key exception. We have, hoewever, not been able to reproduce the situation, due to the nature of the race condition, and we found very
little documentation on the subject.
What we would like to do now, is to differentiate between the two. We see two options:
1) We could just use the first of the rows and ignore the second. This solution would require that the metadata for both rows are identical.
2) We could discern the "real" index from the "rebuilding" index. This requires some kind of extension of the Where-part.
We have not been able to determine if the requirements for either option is present, as we havent found any documentation, nor have we been able to test for differences, as we cannot reproduce the situation.
We would also like some way of reproducing the situation, so ideas as to how to do that is welcome.
Can anyone direct me to relevant documentation, or alternate solutions.
HRP

1. Use the index with the lower fragmentation to identify the newly rebuilt index (as it almost always will have lower fragmentation)
2. To reproduce, block the online index rebuild process by trying to alter the table's definition in a transaction (and don't commit, which will place schema lock on the table)
Satish Kartan http://www.sqlfood.com/

Global Address List for multiple people with same name?

When writing a new email, I want to add a name from the global address list of my microsoft exchange Contacts group. I select the blue plus button and type in the name. If there is more than one person in my company with the same name, both people will show up. However, Mail is not letting me see the details of either of the two people so I don't know which one is the right one.
However, if I start from Contacts, Groups, Exchange and type in that person's name, when I select a name, a second screen will show up with the details (email address, title, etc) of the person. That way, I know which one is the correct person who I want to email. Why can't I do this directly from Mail? If I need to send an email to multiple people from the GAL, I don't want to have to search for them via Contacts.
Thanks!

I don't know the exact and complete specification of your intended schema...
anyway, from what I can see in your post, I assume that
<deed>
    <deed_type>
        <name>Quit Claim</name>
        <value>Sheriff</name>
    </deed_type>
    <deed_type>
        <name>sheriff's deed</name>
        <value>Sheriff</value>
    </deed_type>
    <deed_type>
        <name>Warranty</name>
        <value>W</name>
    </deed_type>
</deed>would be the "proper" way to go...
which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value"

Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?

Similar Messages

Maybe you are looking for