Migrating to PSE10 & moving default storage locations

Greetings all,
I have purchased the upgrade from PSE9 to PSE10 and am planning to migrate the default location of my images and catalog from a local drive on my Windows 7 PC to a NAS device. I am wanting to move the default location to a NAS so that I can access the catalog, thumbnails and images from more than 1 location. (Yes, I know about the performace problems if using a wifi and am not).
The question that I have is one of sequencing these steps. What is the best sequence in order to reduce the hassles associated of migrating to the newest software version and moving the location of of all of the image assets I have, knowing that I have about 10k images in my catalog.
At a bare minimum I know I need to:
upgrade my local PSE9 application to PSE10
possibly export the catalog
import the catalog into the new catalog on the NAS
etc
What is the best sequencing of steps to help me stay clear of trouble as I have a lot of tagging and ratings that I what to preserve?
Thanks all.

Probably best to treat it like the purchase of a brand new computer and use the built in Backup and Restore commands.
I think its best for optimum performance to ensure the catalog as well as the images are stored on the NAS.
The catalog data base normally has a default location in the system files (often hidden files)
You can find the path to the current catalog by opening the Organizer and clicking Help à System info
See this link for backup and restore. It refers to an earlier version of Pse but the principles remain the same.
http://kb2.adobe.com/cps/402/kb402894.html

Similar Messages

Default Storage Location

Hello Gurus,
I am creating a stock transport order and creating a delivery through VL10G, when i create the delivery the default storage location should be X, but it is taking Y as default storage location. Can you guide me through config and also would there be any userexits that can be kept for this storage location.
Thanks,
Sri

Hi,
Can you check the below config done?..
1)SPRO>LE>shipping>Picking>Determine Picking Location..
2) Define rule for picking locn determination for the delivery type..in your case for deli typ..NL or NLCC
3)Go to "assign picking location" submenu and maintain default picking storage location for the data as per Rule. e.g. if rule is shipping point plant and storage condition...you need to maintain X SLoc for particular shipping point, plant and storage condition.
Hope this will help..
Reg,
Sudhir

Default Storage Location of Child items in BOM

Hi Experts,
We are facing a problem, when we create BOM, we have to manually put default Storage location (Backflush Storage Location) in each of the line item. Can somebody suggest me some solution sothat it should come automatically in all the line items.
Ishu

Dear Ishu,
1.Backflushing storage location can be set either in the material master in MRP 2 view or else in the BOM under status/Long text
tab page.
2.The reason why SAP has provided this option at 2 places is if the material is always backflushed from the same storage
location for any assembly(assuming if this material is used in diferent assembly) means you can set it in the material master.
3.If it's BOM or assembly specific means,set it in the BOM.
4.You have to set this if the backflushing storage location is getting varied for the same component for different assembly
structure.(This system will not propose automatically).
Regards
S Mangalraj

Default storage location setting

Hi,
how can i set the default storage location.
I need to reflect it autometically while booking any order.
Regards,
Rajdeep

Hi Rajdeep,
there are quite different ways to achieve this,
- If you are open for enhancement, then write the piece of coding to default the storage location in Includ:MV45AFZB under
USEREXIT_SOURCE_DETERMINATION which could be applicable for all doc types or set of doc types/ item cat's
OR
- You can achieve the same requirement with Transaction variant in Tx:SHD0 while recording enter this field manually & at the time of save , save it as "with content" & assign this variant in order doc type details in VOV8.
then whenver you create sales order using this doc type, storage location will be defaulted. ( assumption is - you have single storage location which has to be defaulted in order)
Hope it helps,
Regards,
ReazuddinMD

CJ20N, auto-defaulted storage location at activity level

Hi all,
we have this problem at CJ20N (PS) screen.
At activity level, componenent overview, if user keys in the material no, a storage location is auto-defaulted
later we found out that if the material is extended to only 1 storage location, the storage will be auto-defaulted at componenet overwview, is there any setting to prevent the auto-defaulted storage .. pls advice

Hi,
Carry out these IMG steps:
SPRO
Logistic Execution
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Set Up Storage-Location Dependent Shipping Point Determination
Assign Shipping Points According to Storage Location,,,,,,,,
Put in your combination of Shipping Conditions / Loading Group/ Plant/ Storage Location/ Proposed shipping point
Next time you create a Delivery document,, the system will pick up the above values from the Material/Customer master records and propose a Storage Location at line item number.
I just tried it and it works, let me know if this works.
Cheers,
Mohammed
Edited by: Mohammed Raheel on Jun 5, 2009 1:09 PM
Edited by: Mohammed Raheel on Jun 5, 2009 1:11 PM

Change default storage location during creation of PO

Hello all,
I have the following question.
When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
I need to change this default, because the storage location must be determined in another way.
So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
For this I probably need a BAPI.
Can anyone tell me which BAPI to use and how I can implement this?
Because I also no experience with BAPI's.
Thanks in advance.
Kind regards,
Marco

Hi Van,
You need to goto SE18 -> give 'ME_PROCESS_PO_CUST' in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
<text removes>
Thanks,
Siva
Message was edited by: Matthew Billingham - don't ask for points

MIGO - Goods Receipt against Outbound Delivery - Default Storage location

Hi All,
We have a Plant A001 and 2 Storage locations B001 and C001.
Recently we added a new Storage location D001.
Moving forward we would like to have all goods receipts to be posted to the new Storage location D001.
What are the steps involved so that the GR postings will be done with the new Storage location ?
Please advise.
Meghna

please try this
Out Bound delivery: storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Picking
Determine Picking Location
Assign Picking Locations
Inbound deliver storage location determination
Implementation Guide for R/3 Customizing (IMG)
Logistics Execution
Shipping
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Assign Goods Receiving Points for Inbound Deliveries

Default storage location for transfer posting

Hi Gurus,
In transfer posting using mvt type 311,i want to make the storage location defaulted by a particular storage location. In other words system should not allow transfer posting if i use other storage location. Is this possible?
Regards,
Kumar

[Restrict user to post to a particular storage location|Restrict user to post 313 to a particular storage location.]

Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Moving default storage

i have the razr hd and i was wondering if anyone knew how to change the default storage to the external sd card? i have moved the camera settings to this one but i dont know how to change the default phone settings to it. little help please?

Good Afternoon gacrkr85,
We would be delighted to help out today. We fully understand how important it is to be aware of applicable storage options on your device. When it comes to your device storage allowances, generally speaking only pictures, videos, & music can be stored to the SD Card. Applications and system information/settings can only be stored on the internal memory of the device. What type of information/files are you attempting to send to the SD Card? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

Default Storage location from PO to GR

Dear All,
How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
regards,
qsm sap

Hi,
First Storage location should be extended in Material master.
Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
One other option is In IMG settings if you set the checkbox set storage location automatically.
Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
No matter if you extended in material master/PR/PO
rgds
Chidanand

Default Storage Location in MIGO

HI,
We have materials stored in specific and unique storage location. Our user want to default the SLOC in MIGO as he does not want to enter each and every time. Currently, system was not proposing it unless we mention in PO. But, the buyer may not know the SLOC and he does not want to enter.
Is there any way to populate SLOC in MIGO based on material master??
Appreciate your responce.
Regards,
Dev.

Directly from Material master to MIGO is not possible.
But you an maintain the field Storage location EP (EP = external procurement), it is in MRP view. This will then default to requisition and from requistion it will flow into the PO, from the PO it will flow to MIGO.
Making the storage location field mandatory is no solution, as it will restrict you from creating POs with account assginment, as those POs do not have a storage lcoation.

Default Storage Location - in DMS

Dear Gurus,
I am trying to integrate SAP Easy Document with DMS. I am able to chekc-in the file with Tcode CV01n in to storage category whcih I have created. But when I try to check-in the file through SAP Easy Document, system will give the error as " Error while check in storing".
I think SAP easy document is taking some other storage catogory by dafult. How can I default the storage catogory which I have created.
Thanks
Damodar Pai

Hi,
please check the following
1.)When logging on via Easy DMS for the first time, system will prompt you to create a root folder. Confirm dialog box with u201Cyesu201D and enter name of the root folder.
2.)When creating the first document (see Business Process Procedure script) of a particular document type, select the appropriate type from the dialog box (for example XLS for Microsoft excel files) and activate the checkbox Use this application for all files with this extension. Choose OK.
3.)When creating the first document (see Business Process Procedure script), select default storage u201CDMS_C1_STu201D and activate the checkbox Use this storage category for all files. Choose OK.
note : use your storage catagory!
Benakaraj
??P

Moving App Storage Location

I am using a PC. My music and videos are all on my portable external HD. My Apps are all on my internal C drive. I want them on my External. It is extremely time consuming to move them and then tell iTunes where each and every individual app is, especially when every time it updates the app or I get a new app it puts it back on the C drive.
Will someone please tell me I can have iTunes move, keep and manage it on the external? And then tell me how to do it. LOL
Cyber

You got the answer in another forum, so you might want to mark this one "Solved"
I noticed that you mostly fixed it yourself - congratulations.

Default storage locations

Is there anyway in the settings to make pictures and videos automatically save to the SD card instead of internal memory?
Or is there a way to move them to the SD card?

Pictures and Videos already save to SD Card/DCMI/CAMERA FOLDER

Migrating to PSE10 & moving default storage locations

Similar Messages

Maybe you are looking for