Miix 2 8 wont start after pressing the power button

Hey guys,i have this problem with my miix 2 tablet that whenever i press the power button the tablet goes to sleep but does not wake up agani.i can feel the vibrate by touching the windows logo but nothing happens.then again have try for like 5 mins to wake up the tablet ...i have switched off the hibernate option by command prompt but still the problem exist! if someone knows how to fix this,please tell me!!..i have been using the tablet for like 3 months already..Also i did change the broadcom settings but still the problem remains...Thanks

I got this tablet 10 days ago and have been having the same problem. I think I solved it. It is not just the Broadcom adapter but many more (for example, Bluetooth HID device under HIDs in the device manager) that has the option of "Power Management" under the properties and there is an option called "Allow the computer to turn off this device to save power" (well, for Broadcom, it is under Advanced. I disabled what is known as Minimum Power Consumption). I hunted for all devices with this power management option and disabled in all of them (Well, the tablet might become more power hungry; I did not do this for the GPS). Now for almost a day, my tablet wakes up whenever I press and release the window button.

Similar Messages

My macbook pro will not start after pressing the power button

I have bought a macbook pro last year and now, I have a great problem since a few months.
My macbook does not boot up, I hear no fan noices and no LED lights are blinking...
Battey is full, but nothing happens (means system will not start up).
I have also tried to start with the Power button - but the similar effect "NOTHING HAPENS".
What I don't understand is, if I do nothing for one or two days and press then the power button, the system will start up and full functionality for a few days.
And anytime I get the same problem again... and must wait also for a few days.
Can anybody support me please.
Thank you all in advance and looking forward to a fast reply.

Try reseting SMU as suggested in link below
http://support.apple.com/kb/ht3964
Allan

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

Pavilion dv6z notebook - shut down a few seconds after pressing the power button

Pavilion vd6z powers up for 5 seconds (I see the HP logo screen and the Windows startup asks if it should launch the Repair or Start Normally) then it shuts off.
I have removed the battery/disconnected the adapter and held the power button in for over a minute several times, removed and replaced the memory, blown the dust from the cooling fan & heat sink. I also have tried booting with the hard drive removed. The same issue exists if I have the battery in or not. After all of the these steps, the system still starts up and then powers off after just a couple seconds.
If I press ESC to enter SETUP, the system will still power off.
The warranty expired a few weeks ago and HP tech support can not help me...other than suggesting that I put a post on the forum.
Has anyone experience a similar problem and found a solution?

Hello again visionpga.
If you've used known working memory and the problem still exists then you've ruled out many of the causes as you've tried testing all the hardware which you can test. I believe you're experiencing a motherboard issue which is likely a short. This repair is possible for you to do yourself if you have technical experience or you could have the notebook repaired by HP.
If you want to try repairing the notebook yourself I'll need your product number. This document shows how to locate the product number.
The US/Canadian number for HP Support is 1-800-474-6836. If you're in another country you'll need to visit HP Support Worldwide to locate the contact information.
If you have any other questions just let me know.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Satellite S45-ASP4310SL doesn't turn on, after pressing the power button, a LED blink

Mi laptop Toshiba Satellite doesn't turn on anymore, THIS MODEL DOESN'T ALLOW ME TO REMOVE THE BATTERY, everytime I lift my finger from the power button the white LED light blinks, I've tried pressing for 30 seconds and a bit more and doesn't works, I've been using this laptop for more than a year, 2 days ago I leave it charging while gaming and go to the bathroom, when I head back, it was turned off and doesn't charge neither.
Please help me, and excuse me for my bad English

Hello.
Do you have any security passwords set for your hard drives?
There was a user that reported a similar problem with his machine a couple of weeks
ago, and it turned out to be tied to the HD password he had set. When he turned the
password off, the machine booted normally.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

My iPod unexpectedly stopped working. It won't turn on even after pressing the power button for 1 minute. My iTunes no longer "recognizes" the iPod and is forcing me to restore it but I'm not sure if that will work! HELP!!!!!!

Thank you and please respond as fast as possible -----

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

P35 Platinum: I have to press the power button multiple times to start

Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?

Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro

RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

Did you purchase the Mac new?
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
message edited by: cs

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

I got an iPhone 3gs!! i tried updating it to iOS 6!! but then went off in between after it stopped and remained stucked! i pressed the power button nd the hme button 2geta! then it went off.... now when i switch it on.. it goes on then off then on.. help!

i have an iphone 3gs........it is not jailbroken........I was updating to iOS 6!! THen a box came up saying ios 6 will install in 5 seconds................ after wards....... it shut down then restarted.............. the apple logo came up and then below it was a bar.......... it had to be full to complete the installation ............ after a few minutes the bar stopped in between and remained stuck!!! then i pressed the home button and the powerr button together........ it turned off!!! then i restarted it ......... the apple logo comes up then goes off!! it happens and is not stoping until i press the power button once!! whenever i m starting it ....... the apple logo is coming up then goes off ... plz help me........... my father will scold me!! plz :'( plzz :'( thank u.......... :'(

Safari reloading previous page after pressing the back button

Hey guys, here my question regarding Safari...
Why is it that every time I do the two finger swipe on the trackpad to go back to the previous page I was viewing on the web, freaking Safari takes me back to that page instantly but then automatically reloads the page. WHY?!?!
I don't have this issue while using Firefox. I swipe to go back to the previous page and it's instantly available for me to continue browzing / scrolling, etc.
Another thing I noticed in Safari is that if I'm half way down a page and click on something, which takes me to that page but then I swipe to go back, it doesn't take me back to where I was on the page (say, half way down, for example) it take me up towards the top (not all the way at the top, mind you, just up higher, NOT WHERE I WAS WHEN I LEFT THE PAGE) Why does it do this?!?! You'd think that Apple would have designed Safari to be the next best thing since sliced bread and that it would work instantly and flawlessly. I'd imagine that Firefox and other browzers would be the ones taking forever to load but it's freakin Safari that is doing this, I don't get it.
For the record, Firefox functions flawlessly. Instantly shows the page I was at when I press the back button or swipe back and it puts me BACK IN THE SAME SPOT THAT I WAS AT BEFORE I LEFT THE PAGE!!!!
I use both browzers as I need two (use both for different things and have different bookmarks saved, etc) but I'm starting to HATE Safari simply for this one issue I'm having. It makes surfing the web take 2x as long as I not only have to wait for the page to RELOAD after pressing the back button, I also have to scroll back down to where I was before I left the page, which takes TIME!
Someone please explain this to me. I looked at other posts regarding this issue but there is no clear solution to the problem.
HELP.

I think Apple should give the end user the choice whether to autoload the webpage when you press the back button or not. It would be a simple fix for this issue that it seems a lot of people are suffering with.
I WANT to use the default web browser that my Macbook Pro came with (Safari) and don't really want to use the alternatives (Firefox, Chrome, etc) but surfing the web is a slow, time consuming process with this auto reload "feature".
Apple, Please fix this ASAP!
This is my first Apple laptop (was a long time Sony Vaio / Windows user) and I expected good things from my Mac, after hearing / reading all the reviews but this Safari issue is a MAJOR turn off for me. It needs to be address ASAP.

My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help - HP Pavilion a6030.uk desktop. Have to press the power button multiple times to start up?

Hi,
I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.
My computer has had no problem at all until yesterday for some reason i had to push the power button multiple times to start it until it finally turned on and did the normal start up. Such as i would press the power button as normal to start it, but all of a sudden, it would turn off after about 2 seconds, and so I would press the power button several times and each time it would not start up and turn off, so the power button would be pressed again until it would finally turn on and start up and run as normal and seems to work fine. And it was the same today, i pressed the power button mutiple times (e.g. 6 times) until it finally started as normal.
As im not very knowledgeable or very computer/technology savvy wise in this area, please will someone help me and give me some advice/help to fix/solve this.
Thankyou for taking time to read this and any help would be much appreciated to resolving this problem.
Thanks.
This question was solved.
View Solution.

Vonbon90, welcome to the forum.
When I see these symptoms on an older computer, I believe that it may be a failed/ing power supply unit (PSU). Here is a guide that will help your troubleshoot it.
Also, you could test the memory. This can be done by removing all of the memory modules and replacing them one at a time and booting.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?

You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Miix 2 8 wont start after pressing the power button

Similar Messages

Maybe you are looking for