Min Max Planning not reading Flow Schedules as Demand

We use min max planning to order all recurring purchases and flow schedules for production planning.
Min max planning report does NOT see flow schedules as a source of demand. Is this correct or are we missing a setup somewhere?
If min max planning cannot read flow schedules, is there a standard report to identify component shortages where items are between min max level but not enough on hand to fulfill the open flow schedule?

Check the user and employee tht you have used to launch the conc prog...

Similar Messages

  • Min-Max Planning simple questions

    Hi
    I'm trying to use Min-Max Planning. Inventory User's Guide says that Min-Max Plannig uses a demand to evaluate order quantity, but don't tell if such demand by month, year or whatever. Looking the figures seems to be annual demand (but doesn't match my annual sales). What kind of demand is used?
    If demand is calculated on a yearly basis, resulting order qty should be to satisfy sales of a whole year (I guess).
    Is there a way to change that? Does really matter?
    Please some words of advise
    Oscar

    OPR wrote:
    Hi
    I'm trying to use Min-Max Planning. Inventory User's Guide says that Min-Max Plannig uses a demand to evaluate order quantity, but don't tell if such demand by month, year or whatever. Looking the figures seems to be annual demand (but doesn't match my annual sales). What kind of demand is used?Hi Oscar,
    depending upon at which level (organization or subinventory) you are running Min-Max planning and the options selected for net demand will determine what will be included under open demand. It is the total open demand on or before the demand cutoff date, based on net demand selection for reserved & unreserved orders and WIP. It is NOT by month, year or any period.
    Min-Max at Organization level:
    If you choose Yes for Net Unreserved Orders, Net Reserved Orders and Net WIP Demand then Open Demand is the sum of unreserved sales orders, inventory reservations (including reserved sales orders), account issue move orders, and WIP component demand scheduled for issue on or before the demand cutoff date.
    Min-Max at Subinventory level:
    If you choose Yes for Net Unreserved Orders and Net Reserved Orders (no WIP demand option here) then Open Demand is the sum of inventory reservations (including reserved sales orders), account issue move orders, and subinventory transfer move orders scheduled for issue from this subinventory on or before the demand cutoff
    date. At subinventory level inventory reservations referencing a different subinventory, or with no subinventory specified, are not included.
    e.g. if the demand cutoff date is 30-Jun-2009 and net options have been selected as Yes then then it will look for demand upto 30-Jun-2009 (Note: some apps reports have time part issue while comparing dates, so in those cases 30-Jun-2009 is taken as 30-Jun-2009 00:00:00 i.e 29-Jun-2009 midnight!).
    Also if you specify a past date for demand cutoff date it will consider open demands available, if any, upto that past date (but you plan for the future, not past).

  • Min-Max Planning Generating Purchase Requisitions

    We have been using min-max planning for a while and scheduling the min-max planning report (planning level: organization) to run every evening to generate a purchase requisition. Of late we have some items that are showing a reorder quantity but not generating a purchase requisition. We have verified the set up of those items against items that are generating a requisition and can't see a difference. What are the possible causes of items not generating a requisition when using min-max planning?
    Thank you!

    Make sure Item Settup has the "List price" Given.
    Source is set to " Supplier"
    When you are running the Min-Max Report, it should have the Parameter "ReStock" to "Yes".
    Since the records has to come from the Inventory to the Purchasing Module there is possibility that Records might be there in Interface tables. Run the "requisition Import" program and see if it address your issue.
    Thanks and regards,
    Phani

  • Min Max Planning

    Hi,
    Is it possible in any way for the system to source it internally for another Inventory/Subinventory if the product is available there or source it from a suplplier if it not available internally when a scheduled Min Max Planning runs.
    Regards
    Vinay

    Not directly.
    But you can setup two min-max runs.
    One that runs between your SHOPFLOOR subinventory and WAREHOUSE subinventory (i.e. internal source)
    And then another one that runs on WAREHOUSE subinventory with source = supplier.
    Hope this helps,
    Sandeep Gandhi

  • ESYU: Min-Max planning을 실행하면 자동으로  ReqImport program이 launch 되지 않는 원인

    Purpose
    Oracle Inventory Management - Version: 10.7 to 11.5.10
    REPORT:INVISMMX - Min-max planning report
    EXECUTABLE:POCIRM - Requisition Import
    Buy items에 대해 Min-Max(with Restock=Y)을 실행하면, 이 program은 ReqImport를
    자동으로 launch 시키지 못하고 단지 po_requisitions_interface_all table에 data를
    insert 한다.
    하지만 사용자는 Min-Max가 실행되면 이후 자동으로 ReqImport가 실행되길 원하고
    있다. 이를 위한 workaround 방법을 소개한다.
    Cause
    ReqImport가 Min-Max 이후 자동으로 실행되는건지, Min-Max에 의해 자동으로 실행되는지
    구분할 필요가 있다.
    ReqImport는 Min-Max에 의해 실행되지 않는다.
    Min-Max의 standard design은 단지 po_requisitions_interface_all table에 data를 넣어
    주기만 할 뿐이지 ReqImport request를 자동으로 실행시키지는 않는다.
    ReqImport는 Min-Max 진행 후 실행될 수 있다.
    왜냐하면 ReqImport는 주기적으로 실행되게 scheudling 되어 있거나, ADS_PO_REQ_IMPORT_TRG1
    와 같은 trigger에 의해 실행된다.
    일부 vision demo instances에서 위 trigger를 볼 수 있는데 이 trigger에 의해 po_requisitions_interface_all
    table에 data가 insert가 되면 ReqImport가 launch 된다.
    Note: 이 Trigger는 standard product이 아니므로 귀사의 instance에서는 찾을 수 없을 것이다.
    Solution
    1. Short-to-medium term solution at your instance:
    1-1) ReqImport가 주기적으로 실행될 수 있게 Schedule 해 놓는다.
    -- or --
    1-2) Min-Max report(Restock=Yes) 실행 후 manual 하게 ReqImport를 실행한다.
    -- or --
    1-3) Min-Max와 ReqImport programs을 포함하는 Report Set을 define 하고, Min-Max 대신
    이 Report set 만을 실행한다.
    -- or --
    1-4) po_requistions_interface_all table에 triggers(similar to ADS_PO_REQ_IMPORT_TRG1)를
    생성한다.
    2. Medium-to-long term solution from Oracle
    ER/Doc bug을 등록하고 metalink를 통해 진행과정을 check 한다.
    2-1) Enhancement Request via ER/Bug 4310485 to have Min-Max Report to fire ReqImport automatically.
    2-2) Documentation Bug 4310487 to have the INV User Guide corrected that Min-Max does NOT create Requisitions,
    but ONLY populates the po_requisitions_interface_all table.
    Reference
    Note 305099.1

  • Supply quantity isn't being considered in min-max planning report Oracle

    Oracle 12 Issue:
    system isn't considering the open PR/PO while suggesting re-order quantity in new PR of same item code. I am giving all parameters with "Yes" except include non-netable parameter with "NO". I take system current date as default date for "Demand & Supply cutoff date".
    Please help me to resove/identify this issue.
    Zeeshan Khan
    [email protected]

    Hi,
    Issue #1:
    Need by Date on the purchase order/Requisition line is after the supply cut-off date entered by the user (or defaulted) when launching the Min-max planning report.
    Fix: Please re-launch the Min-max planning report with higher supply cut-off date.
    Issue #2:
    Destination type stamped on the purchase order line / distribution is Expense.
    Since it will not affect the on hand quantity for the item, the Min-max planning report is ignoring this purchase order.
    Fix:Please retry with a new purchase order with destination type set as Inventory.
    Thanks
    -Arif.

  • Need some help with the DOF Min Max Planning Logic

    Hello All,
    Morning...could someone please help us with this issue which we are facing in our production system.
    We are running the Dof Min Max Planning Report at the Subinventory level and for a given item.
    This item setup in this sub inventory has the Min qty : 2 , Max qty :2.
    --We don't see any open orders/ requisitions in the system for this item.
    --We also don't see any expected receipts for this item coming to this org/subinventory.. All the shipment lines are in Fully Received status.
    --We dont see any stuck supply records in mtl_supply table as well..and also checked for the Inv Transactions interface tables as well ( MTI , mtl_material_transactions_temp)..we dont find any stuck transactions for this item, subinventory & org.
    Now when we are running the Dof Min Max report is is showing the Supply Quantity as 2 and Available Quantity as 2.
    Hence the Reorder quantity is coming as Zero..basically it is not re stocking the item again for this subinventory level.
    Could someone please assist as to what could be reason why this Supply Quantity is showing some value when we dont see any stuck supply / expected open receipts..
    What else we need to check here to get this issue resolved and to know the source of the Supply Quantity.
    thanks

    In the report run, what parameters are considered as Supply?, Also did you check the supply data considering your cutoff dates offset?, the item what you are talking about is a buy item? check if there were requisitions already created.

  • Min max planning report errors out

    Min max planning is defined at Organization level with the source type as
    supplier.
    Min max report errors out for restock option "yes".
    Following is the error message in the log file
    MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
    MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
    REP-1825: Before Report trigger returned FALSE.
    Have checked all the possible causes
    1)work day calender
    2)Default delivery location
    3)profile option.
    Also applied a patch for this error
    Patch number 4613194
    Still the issue persists

    Hi,
    Please review the following notes:
    Note: 453956.1 - INVISMMX.RDF - Mix-Max Planning Report Completes Successfully But Receive MSG-00069 in Request Log
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453956.1
    Note: 785813.1 - MSG-00069, MSG-00070 Errors Occurred While Running Min-Max Planning Report
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=785813.1
    Note: 275521.1 - Min Max Rep (INVISMMX) Returns Errors MSG-00069, MSG-00070, REP-1825
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275521.1
    Note: 280605.1 - 11i INVISMMX- Error Before Report Trigger Returned False Rep-1825
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=280605.1
    Regards,
    Hussein

  • Min Max Planning Report

    Dear all,
    In the exported report that Store use as a reference in raising PR (Min Max Planning - under Planning module) there is a column called “Supply Quantity” .. just want to know where from the data on this column is coming from?!!
    Thanks ..

    Hi,
    Supply quantity comes from various sources of supply (e.g. Open Purchase Orders).
    Thanks,
    PS.

  • Reorder Planning vs Min Max planning

    Hi,
    In what business scenarios should we use:
    Reorder planning (ROP)
    Min Max Planning?
    We are implementing INV/PO for a bank where mostly expense items should be used. Also no manufacturing modules are used.
    So which planning will be recommended and why?
    Also, if re-order planning is suggested, share the set ups (with screen shots), as to how to set up & get the Requisition qty.
    Thanks,

    Hi,
    Reorder planning is like two bin system. When one bin is empty, the demand is fulfilled from the second bin while the replenishment order is generated for the first one. Reorder Planning uses Oracle Inventory forecasting information to calculate average demand.
    In min max planning, we maintain 2 levels, minimum and maximum. When the stock goes below the minimum level, the Requisition is created for the Qty =Max level - Qty already in PO/Req - On Hand.
    However, option is available while running min-max to include or not include Qty alrady in PO/Req.
    In min-max, the min-max levels have to be maintained manually and the demand forecast is not taken into account.
    Hope this answers the question.
    Atique

  • Min Max planning report - ability to run for specific vendor

    Hi,
    We have a unique requirement wherein business users would like to run min-max planning report for a specific vendor. Vendor here is item sourcing vendor. We are on R12 12.0.4. This version of applications doesnot support sourcing vendor as the min-max report parameter.
    Other than setting up item category for ASL vendor, i can't think of any other easy way to accomplish above requirement. Please suggest workaround for above requirement.
    Thank you

    If you have to do this, here is a complex workaround.
    Create a request set that contains a custom program as first stage and the regular min-max as the second stage.
    The custom program accepts vendor name as a parameter and disables min-max planning flag for all items EXCEPT those that are sourced from that vendor.
    Then the 2nd stage runs and creates requisition.
    You may add a 3rd stage that resets the min-max planning flag.
    Make this program incompatible with itself so 2 users won't run it at the same time.
    Hope this helps,
    Sandeep Gandhi

  • Min-Max Planning concept

    Hi Neils,
    Can you please throw a light on --> Min-Max Planning Concept and what is the formula for Min-Max
    regds
    MRR

    Hi MRR,
    Min-max planning is used to maintain inventory levels for all of your items or selected items. With min-max planning, you specify minimum and maximum inventory levels for your items. When the inventory level for an item (on-hand quantities plus quantities on order) drops below the minimum, Oracle Inventory suggests a new purchase requisition, internal requisition, move order, or job to bring the balance back up to the maximum.
    See the Inventory Users Guide > Planning and Replenishment > Min-Max Planning for more detailed description of the principles behind. In addition to Min-Max you may want to consider Reorder Point Planning where you bring demand figures into the calculations.
    If you would like to have sales orders or production demands on end-item or sub-assembly levels influence the planning of components then a type of MRP is needed to break down a product structure to lower level material requirements. For even more advanced planning where capacities, constraints and may be even different optimizations objectives are to be considered you have to look at the Advanced Plannning Suite of applications.
    Hope this helps ypu in the right direction.
    /Niels LM

  • Min Max Planning - Sub Assembly WO Demand Planning

    Hi All,
    WO for FG should be a demand for WOs for SA. Can Min Max look at the WOs of FGs and if SA is a component, create a WO for SA?
    I observed Min Max doesn't support this. Let me know your pointers.
    Regards

    Hi All,
    Min Max Planning Supports WIP Demand.
    Regards

  • Min max planning to get supply quantity

    hi
    in INV super user there is the standard report for MIN MAX planning report
    i see supply_qty but cant find the calculation on how supply_qty is done
    kindly guide me

    hi
    i cud only see ref to supply cut off date ,can u guide me on how the report displays supply qty ie from where is this calculation performed ,is there
    a query or a package for the same
    in the report i cud see all these values come from INV_MIN_MAX_TEMP ,this is a temporary table,how do values get in here?
    kindly guide me
    thanking in advance
    Edited by: makdutakdu on Feb 2, 2011 7:25 AM

  • Min Max Planning Error-Unable to generate requisition

    when we run min max planning in test instance for certain items we get the the below error:
    “Unable to generate requisition”
    Checked the source type for the items which had this error.There is no Source type set for those items even then we get this error.Any help.
    Thanks

    Check
    Min/Max Planning Message: "Unable to Generate Requisition" [ID 113224.1]
    Getting Message "Unable to generate requisition" in the Output of the Min-Max Planning Report (INVISMMX) [ID 1265297.1]
    Hope this helps,
    Sandeep Gandhi

Maybe you are looking for

  • How to update the VBFA table without entries in VBRK and VBRP tables

    Hello, I have a requirement , where the sales order , delivery happens in one SAP system say X system and billing document wil happens in other sap system say Y. Now in this particular case , if the user want to know the billing document number in X

  • The best/clean/free approach to moving SharePoint Web Application between environments?

    Hello Forum, I have an environment e.g. (Environment1) Web Application that contains 90 site collections (Including: Lists, Libraries, Workflows, and custom solutions), and its URL is (http://Dept.Company.com/) I must move this entire Web Application

  • How to eject a stuck dvd?

    How to eject a stuck dvd?

  • OIM Password Policies

    Hello All I have a number of users setup in OIM and am using it for provisioning. I have the users in different organizations based on class of user and permissions to the portal. I have a need to have different password policies based on the organiz

  • Muvo T200 - auto turn off.

    Hello, I love that player but that thing it's getting me crazy, it's not working, and I don't know why. I set 2 minuts or 30 - it doesn't matter, it's still playing. Any ideas? Thanks a lot, blunt from Poland.