Min Receive signal power level at the atur from atuc

Hi can someone help me with the min receive signal power level at the atur from atuc on a adsl router

Hi Srikanth, 
Just to get some background info, what type of signals are being generated? What device are you using to measure these signals?  Are all of your impedances appropriately matched?  And finally would it be possible to attach the file used for waveform generation?  What I am mainly curious about is if you are trying to generate a single signal at 70MHz or if you are trying to generate at 70, 72, 68,and 66MHz at different power levels.
Regards,
Kyle S 
Applications Engineer
National Instruments

Similar Messages

  • I have a problem in the iPhone 4 is an inability to make or receive calls, and must restore the information from iTunes, how do I do this and what is the way?

    I have a problem in the iPhone 4 is an inability to make or receive calls, and must restore the information from iTunes, how do I do this and what is the way?

    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I received an iPhone 6 in the mail from my previous service provider but I already changed to a different provider and got an iPhone 6 thinking I wouldn't receive the phone in the mail. Should I mail it back?

    I received an iPhone 6 in the mail from my previous service provider but I already changed to a different provider and got an iPhone 6 in the meantime because my iPhone 5 stopped working and I was desperate thinking I wouldn't receive the phone in the mail. Should I mail it back or sell it?

    You aren't serious are you? Send it back. It is not yours, you do not own it, therefore selling it would constitute selling stolen goods. You would be committing a crime, and you would be screwing whomever you sold it to.
    GB

  • My iPod Touch has been stolen, someone offers me to make his mine. How can I erase the informations from his iPod and make sure that my library will copy in the new one?

    My iPod Touch has been stolen, someone offers me to make his mine. How can I erase the informations from his iPod and make sure that my library will copy in the new one?

    Restore it as new.
    iPod touch User Guide (For iOS 5.1 Software)

  • HT201412 My ipad mini will not power off. The ICloud Backup  reminder is stuck on the screen and will not clear off.

    My ipad mini will not power off, nor will it respond to any commands.  The ICloud Backup reminder (which I do not use and have not activated)is stuck on the screen and will not clear.

    Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • JDBC Receiver Adapter:Incorrect syntax near the keyword 'FROM'

    Hi All,
    I'm trying to get data from an SQL 2005 server using synchronous JDBC receiver adapter. I'm using PI 7.0. My outgoing message is as follows:
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
    - <STATEMENT>
    - <ECZ_IZIN_YUKU action="SELECT">
      <table>ECZ_IZIN_YUKU</table>
      <access />
    - <key>
      <iy_yil compareOperation="GT">1900</iy_yil>
      </key>
      </ECZ_IZIN_YUKU>
      </STATEMENT>
      </ns0:MT_IZIN_YUKU_REQ>
    I've found the following log in the trace file:
    #1.5#0014C23BCFC900630000003D000013B000042740B0A858B1#1169058702046#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.jdbc.XI2JDBC.onInternalMessageBinary(Message)#J2EE_GUEST#0####fa10f5f0a65811db84410014c23bcfc9#XI XI2JDBC[CC_JDBC_RECI_BRD_TO_BHT/HUMANIST/]_2574##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Error processing request, rollback: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ECZ_IZIN_YUKU' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'FROM'.#
    Thanks a lot..

    Hi,
    Make sure the XML structure for your SQL statement is correct. Include the all the fields in the structure of XML.
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
    <STATEMENT>
              <TECZ_IZIN_YUKU ACTION="SELECT">
                     <TABLE>ECZ_IZIN_YUKU</TABLE>
                              <ACCESS>
                                   <EMPNO></EMPNO>
                                   <NAME></NAME>
                               </ACCESS>
                                 <KEY>
                                       <iy_yil compareOperation="GT">1900</iy_yil>
                                 </KEY>
    </TABLENAME>
    </STATEMENT>
    </ns0:MT_IZIN_YUKU_REQ>
    Best Regards

  • I receive multiple copies of all the messages from my inbox

    e-mail SP: exmail.qq.com
    each time I check my mail with thunderbird (POP3) all the mails in the server inbox are downloaded again.
    I have tried all the suggestionn from the form (deleting the index, deleting the date file, un-checking leav on server box).
    my colleagues who use outlook have a checkbox to solve the problem ("do not download multuple copies of one mail). I don't see the equivalent in TB.

    Your 'popstate.dat' file keeps a record of what it has downloaded, so that when it connects with the server and looks in the server Inbox, it should not download anything that was previously downloaded.
    In your case, you have kept old previously downloaded mail in the server Inbox and the confused popstate.dat is seeing them as needing to be downloaded.
    This means that the 'popstate,dat' file must be corrupted - gone awol - because it keeps downloading previously downloaded emails.
    You need to access your Profile Folders and delete the 'popstate.dat' file.
    Profile Folders are hidden folders.
    make hidden files and folders visible:
    * http://kb.mozillazine.org/Show_hidden_files_and_folders
    access Profile Folder:
    * http://kb.mozillazine.org/Profile_folder_-_Thunderbird
    In thunderbird:
    Help > Troubleshooting Information
    click on 'Show Folder'
    a new window opens showing your Profile Folder.
    '''Close Thunderbird now''' - this is important
    Click on 'Mail' folder
    click on 'mail account name'
    look for 'popstate.dat' file and delete it.
    close the window.
    Open Thunderbird.
    What will this do?
    When Thunderbird restarts, it will create a new 'popstate.dat' file. The downside is this. As it has no knowledge of what has been downloaded, it will download everything that is on the server Inbox, but only once.
    The good thing is this. This should fix the popstate.dat file and prevent further downloads of previously downloaded mail.
    You will then need to delete any duplicates that were previously downloaded. There is an addon that you could use to help with duplicates.
    * https://addons.mozilla.org/en-us/thunderbird/addon/remove-duplicate-messages/
    see image for where popstate.dat file is located.

  • Availability Chk at Plnt level excluding the stk from some storage locatn

    Hello Gurus,
    I want to configure availability check at Plant Level which should exclude stock from few storage location. Example: if Plant 1000 is having 20 Storage location, at the time of availability Check it should consider only stock of 15 storage location and not the other 5 storage location.
    How do i achieve this scenario.
    Note: the 5 storage location which it should not consider can have unrestricted stock.
    Thanks
    Prashant Ranalkar

    >
    Prashant Ranalkar wrote:
    > Hello Gurus,
    >
    > I want to configure availability check at Plant Level which should exclude stock from few storage location. Example: if Plant 1000 is having 20 Storage location, at the time of availability Check it should consider only stock of 15 storage location and not the other 5 storage location.
    > How do i achieve this scenario.
    > Note: the 5 storage location which it should not consider can have unrestricted stock.
    >
    > Thanks
    >
    > Prashant Ranalkar
    Hi Prashant,
    You could check this on "Availability Check Control " screen,
    There is a chack box to select " Storage location", This indicator is used to set the scope of the availability check. It is used to switch off the check at storage location level.
    Hope this will help you for further analysis.
    SAN..

  • HT4101 my lightening connection from my ipad mini to camera with usb deleted the pics from my camera and did not put them on the ipad

    lightning connection from my ipa mi to camera with usb delted the pics fom my camera and they are not ony ipad

    Where did the movies come from?
    For what you said you should be easily be able to do what you want except for:
    "remove them from the ipad but still have access to them for viewing on the road or at hotel"
    Home sharing only works wehn the devices are connected to the same network
    Understanding Home Sharing
    If they are iTunes purchases, you should be able to redownload most iTunes purchases on the road if you have an internet connection by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Disk cant be burned because my laptop failed to calibrate the laser power level for this media

    Tries to burn some files onto a CD-RW and I got this error message. The disk cant be burned because my device failed to calibrate the laser power level for the media

    Hi David,
    Mac SuperDrives are notoriously picky about the discs they'll play nicely with. Looks like your's is one of those. FWIW, I've had many more problems with RW discs than regular ones. I'd try another brand of regular disc.

  • 15454 Low Output Signal Power

    Having a problem with the Bits timing output on pins A3, B3 and A1,B1 on the back of the Sonnet Shelf. Appears the output signal power of our 15454 is reading 1.30 which is very low.
    Tried changing the LBO setting and it did not make a difference.
    Need to now if there is a way to boost the signal power level up.
    The bits timing ouputs are used to time our Motorola BSR (CMTS) for telephony. The problem the Motorola BSR's are experiencing is when you failover the SRM (CPU) to the Secondary SRM, you loose both timing inputs.
    Any advice?

    To understand how BITS Network clocking work and how to troubleshoot when there are loss of Signal power
    please check the following URL which provides useful information
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120db/120db7/str3bits.htm
    http://www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080124260.shtml#topic1

  • I have a Mac Mini ,I changed the keyboard from a US style to a UK style. The computer still thinks this is US style.

    I have a mac mini Sept 2012, I have changed the keyboard from US style I used to have to a new UK version LOGITEH k120.
    Sadly the computer does not recognise this change and still operates as US style.
    Ie to write '@' I have to prress shift 2.
    There does not seem to be a method of changing this.

    Hi, depend on OS...
    System Preferences>International, (changed to Languages in 10.8 I think), Input Menu tab, what KB types are checked there?

  • Can I use adapter of the iphone (not the cable), to attach the power cable of a macbook pro bought in Canada? The power adpter for the macbook pro is two pins because it was bought in Canada. Thank you.

             Hi! I will get a macbook pro bought in Canada soon. Can I use the adapter plug of my iphone (ireland) not the cable, as the adapter to plug my macbook? The power adpter of the macbook from Canada is a two pin. Thanks for any help.

    I wouldn't, the Mac draws significantly more power than the iPhone. Why risk it.

  • Error when trying to open, edit & save the document from email link

    Hi,
    The error occurs when user tries to open the document from the email link (after the document is "shared" with them.
    The recipient has been given edit rights.  When the document is opened it is opened in read only.  The recipient will click "Edit Document" and then they receive an error
    "The file or folder name http://servername/sites/documents/Shared Documents/IT/Test/TESTfile.xlsx?NoRedirect=true' contains characters that are not permitted. Enter a different name."
    Any suggestions please.
    Thanks.

    Hi Inderjeet,
    Thank you very much for you reply.
    I tried with the LAN options, it didn't help.
    I see that in the
    http://blog.ray1.net/2007/12/file-or-folder-name-contains-characters.html it's written as the error occurs while "Creating a new site based on a custom site definition, you get the above error", which is not my case.
    Mine happens when I click on the link from the email body. An exact thread I found :
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/d724a882-66cf-4515-a088-afd7d088b103/email-link-to-share-documents?forum=sharepointgeneral&prof=required
    But no solution is mentioned there as well.
    I think this is an issue with SharePoint 2013. Do you agree? I would like to invite more experts for their opinion on this please.
    Many thanks & Regards

  • Is there a way to stop the brightness from going up when alarm goes off?

    I have an iPhone 5s running iOS 7.0.6. I plug it in at night next to my bed and use it as an alarm clock. I am running the NiceClock app because it has a great black background with slim red clock numbers (doesn't throw a lot of glare). I am using the built-in Clock app that comes with the current iOS as the alarm (NiceClock, while great for a simple bedside clock with no glare, does not come with an alarm). I set my iPhone's brightness on the lowest possible setting to keep the backlight glare down. It's great. Low glare, and I can still see the time if I wake up in the middle of the night without having to fumble with the iPhone. My problem is when the alarm goes off the brightness level jumps up to maximum. Is there a way to prevent the brightness level of the iPhone from changing when the alarm goes off?

    Yes the calendar is gone. I guess it is the notification center I am referring to that comes down when I accidently swipe the top of the screen. Is there a way to stop of notification center from coming down if you swipe the screen? I figured out how to stop the control center from coming up if you swipe the bottom on the screen. Now I just need to figure out how to stop the top of the screen from doing the same thing

Maybe you are looking for

  • ADF BC: calling SDO : Value for parameter 'findCriteria' cannot be null

    We have created a service interface from an application module. That service interface contains views that have view criteria. We have included those criteria in our services. From my consuming application, i added a data control from webservices by

  • Query or Profile Option to find Current logged in user in oracle apps R12

    Query or Profile Option to find Current logged in user in oracle apps R12. I want to get value of current user who is logged in to that particular session, based on the value of user_id or user_name returned i have to do a Forms Personalization. Plz

  • Export incomplete puzzle

    For two days , my export slideshow beuguent . Indeed, the export is corect early then the image freezes while the music continues. Do you have any idea? Thank you for your help

  • Database needs to be bounced every three weeks

    I am a consultant (OCP DBA) on-site with a client. The problem they are having is that after about 2-3 weeks of up time their Oracle 9.2.0.2.1 running on Server 2000 SP2, on more than adequate hardware, slows down to a creeping speed, when they bounc

  • Solman_Setup blank screen

    Hello all, I created a new installation of Solution Manager 7.1 and I'm having an issue where I run SOLMAN_SETUP and then my IE browser opens to a blank screen. I have configured connection for HTTP rather than HTTPS. I have set all the params in RZ1