Min runtime in Campaign Planning

Hi,
Can anyone tell me how to setup minimum runtime in campaign planning in PP/DS. The campaigns are defined by different colors (setup group) of the products. I am not sure how to ensure minimum runtime for a campaign i.e. a specific color to run at least for min duration. In campaign planning profile I can use maximum number of orders per campaign, but not the duration.
Thanks,
Andy

Hi,
Is it possible to limit the duration of a campaign ?
Thx,
Andy

Similar Messages

  • Setting up campaign planning in DS Planning Board

    Hi
    We currently have SAP EC6 and am looking at how campaign planning might be of benefit. WE do not have APO so arer looking at the basic functionality. Does naybody know wherer I could get a configuration manual that would step through how to set it up?
    Mike

    Hi MIke,
    For quick reply / Visibility you can post this in the APO - PP / DS forum
    Reg,
    Dsk

  • How restrict all products of a Product category in the Campaign Plan

    Hi,
      Could you please suggest me how to restrict all the list of products of a product category in CRM_MKTPL transaction ( Marketing Planner ).
    Standard SAP behavior is to "explode" the category to list all products within the category onto the marketing or campaign plan.
    The requirement is to display only the Product Hierarchy but not all the products under that Product Hierarchy.
    Regards,
    Sampath Kumar Chinta.

    Hello Sampath,
    One of the prerequisite for this is define product hierarchy in the customizing
    IMG>Marketing Planning and Campaign Management>Product Assignments>Assign Product hierarchies.
    Product categories are assigned to Hierarchies, when a product category is included in a Campaign, it picks up data from the relevant hiererchy.
    Hope this helps.
    regards,
    Muralidhar Prasad.C

  • Can i use my galaxy 4 mini on a prepaid plan?

    can i use my galaxy 4 mini on a prepaid plan?

    No. That is a 4G LTE smartphone and isn't compatible with the prepaid plans offered by Verizon Wireless.

  • Campaign plan in pp?

    can anyone tell me what is campaign plan in production planning and in the process flow of production planning where it fits.
                                                                                    regards
                                                                                    sanjay

    Hi,
    This component addresses the needs of discontinuous production in companies in process industries that manufacture sequences of identical production charges on their production lines.  You can manage batch manufacturing using production campaigns.
    The aims of campaign management are the following:
    Reduced costs achieved by grouping sequences of identical production charges and thus carrying out more efficient setup and clean-out processes which can be very costly.
    Higher product quality in cases where the deisered quality level is achieved gradually in the production process as opposed to immediately from the first batch.
    More exact settlement resulting from clear distribution of campaign fixed costs (setup, clean-out, and tear down costs) to the orders involved.
    Regards

  • Campaign Planning:  wrong campaign description.

    Dear Experts,
    I am working in a PPDS project for a process industry company, company production highly depends on materials allergens, changeovers between materials with different allergens is very time-costing and moreover company needs to ensure that materials does not get  any others allergens as it could be dangerous for the customer.
    Company wants to visualize allergens for each operation on DSPB and also on order list. Each allergen is a setup group  and I am using Campaign Planning (after Optimizer) to make it more visual, and also take profit of the campaign alerts. Then campaig descriptions should provide information on Order List (I can add a column in the layout cmpgn descript), however campaigns are getting the description from the first material within the campaign and not the campaign description from the campaign profile (customizing).
    -Can anybody help with the description issue? I think it should show the campaign description from the campaign profile, it does take the color from the profile but not the description!
    - Do you think it is a good solution? Suggestions are welcome!
    Thanks in advance!
    Carlos

    Hi Datta Kadam,
    I have been checking the Campaign Badis. It seems that the BADI "Assign Campaign Description after Optimization" -SAPAPO/PCM01_TXTOPT is only intended for when campaigns have been created through Campaign Optimization and it is not my case.
    What about the BADI "Change Respresentation of Campaign Bars" - /SAPAPO/PCM04_PT_PRS?
    In the standard system, the campaign bars displayed in the resource chart of the DSPB are labelled with info: the APO campaign number, short text, and status.
    We can use this BADI tooverride this standard setting and tailor the label for the campaign bar according to our own criteria. Any type of information can be displayed. In addition,we an override the campaign color and status-dependent hatches.
    My requirement is to see in the campaign description, per example on the receipts view transaction or on the DSPB, the setup group as description. So I would be enough with the campaign number and the description (setup group) that I wanna see.
    Thanks a lot!
    Carlos

  • Display error message in Campaigns - Planning profile templates

    Hi experts,
    I am facing an issue while trying to display error message in plannign profile template for campaigns.
    Issue is that even though i am able to add the error message to the parent campaign message container, it is not being displayed on the UI screen  message area(refresh is not happening) until the next screen refresh happens through another event like change of planning profile drop down / f2 pop up being closed on the message area etc.
    I need to display the error message as soon as it gets added in the global message container.Is there any way that i can refresh the UI from this method which would display my error message? I think round trip might work here
    I am tryign to add the message in the method IF_FLEX_DATA_PROVIDER~MODIFY_DATA of component KFPED_LAYOUT .
    But it doesn't get reflected in the message area.
    Appreciate a lot if anybody can help me out here.
    Thanks
    Swapna.

    Closing the thread. Resolved myself .
    Thanks.
    Swapna V.

  • Change the product categories in Campaign planning

    Hello Friends,
    In the Marketing Planner (TCode: CRM_MKTPL), after creating a marketing plan, in the product tab if I append a row and enter a product hierarchy, and press enter then I will get all the lower level data and complete information about the product. But my requirement is that when I press enter after entering the product hierarchy, I should not get the lower level data and also for the entered product hierarchy I should not get the Product Id and description. I need to supress all the values based on a condition.
    The condition is, I will create a Z table and store some Campaign Types in it. Whenever user creates a Campaign or changes a Campaign, the Campaign type should be checked with the Campaign Types in the Z table. If there is a match i.e., if the Z table contain that Campaign Type then perform the operation above i.e., supress the lower level data and product Id, Description for the product hierarchy entered.
    I have found that the BAdis triggered here are
    COM_PROD_MNT_ALL
    COM_PRODUCT_ADD_DATA.
    I thought the BAdi COM_PRODUCT_ADD_DATA is more relevant for this requirement because it had methods like INSERT_ENTRIES, READ_SINGLE etc.
    But when I tried to create an Implementation for this BAdi it throws me an error saying the BAdi is for SAP internal use only.
    So, how to achieve this requirement? Is there any User Exit for this? Or any event that is triggered at this point?
    Regards
    Raju.

    Hi friends
    Is there a way to achieve this? What can be the approach to solve the requirement?
    Hi Pratik,
    How to go with the requirement? Can this be achieved?
    Regards,
    Raju.
    Message was edited by:
            Narayana Raju Sampathirao

  • Is it possible to use a Samsung Galaxy S III Mini with a prepaid plan?

    My sister wants to switch to Verizon and the $60 prepaid plan seems the right fit for her. But she also has her eye on the S III Mini or the S 4 Mini.  Does anyone know if it's possible?  Thanks!

    You cannot use a 4G device on Verizon Wireless prepaid.

  • Min Max Vs Reorder Planning

    Hi All,
    What is the difference between both, Min Max & ReOrder Planning?
    Thanks

    Hi,
    Min-Max planning will be either maintained at Subinventory level or Organization level.
    If the onhand Qty falls below either minimum or Maximum level then system will generate either Purchase Requisitions or Work Orders in WIP module to replinish the inventory.
    On running the Min-Max report system will consider the existing Onhand,PO qty or the Sales Order demand as per the input parametres.
    Reorder Point is an alternate planning method for Min-Max planning method.
    This will replinish once the Item Onhand falls below {Safety Stock+(LeadtimeX Demand)}.This will also produce Purhcase Requisitions for replinishments.
    Thanks
    -Arif.

  • Campaign plans and campaigns transfered to PSP

    Hello,
    Are in PS plans and campaigns from CRM created with the same ID as in CRM. (ID of plan or campaign is also PSP element?)
    Is it some kind of hierarchy in PS? (campaigns under plans?)
    How does such a structre in PS look like?
    Regards
    Radek

    Hi Radek,
    Yes, campaigns from CRM are created with the same ID in PS as it is in CRM.
    It also follows the same hierarcy also as is being created in the marketing planner.
    It is a level based structure where the annual plan can be taken as 1st level, Campaign id at 2nd level  and campaign element as 3rd ........... it all depends on how you define it in CRM. So nothing standard.
    Hope this helps.
    Regards,
    SAP CRM

  • App-v 5 Dependacy : VC++ 2012 Mini Runtime 'Update Error'

    HI Everybody,
    we have been deploying App-v 5 SP1 via SCCM App Deployment for about 7 months now and all was good. however all of a sudden we are getting wide spread reports of software centre complaining that and
    'Update Failed' for App-v.
    Looking into the logs it looks like this is the reason.
    Product: Microsoft Visual C++ 2012 x64 Minimum Runtime - 11.0.60610 -- A later version of Microsoft Visual C++ 2012 x64 Minimum Runtime - 11.0.60610 is already
    installed.
    So I think something has went wrong with the detection method, as we were only looking at MSI code to detection so I added an OR to look for the VC++
    2012 reg keys. however that still dose not work. so I changed an exit code as 1603 as a success but still not working, has anybody started to see this ? anybody know of a good way to resolve this ?
    any help will be most welcome.
    \\SC
    P.s attached some screen shots of logs and general setup for VC++ 2012

    The detection method you're using isn't working, it can be seen from the screenshot you posted:
    *** Application not discovered...
    Use SOFTWARE\Microsoft\VisualStudio\11.0\VC\Runtime\x64 as the registry key and place a mark on the checkbox "This registry key is associated with a 32-bit application on 64-bit systems".
    Also, the MSI product code should be enough. Are you sure you're using the correct product code? You can add the correct one by extracting the MSI package out of vcredist.exe. More info on this can be found here:
    http://www.applepie.se/extract-msi-from-visual-c-2012-redistributable

  • N97 Mini - Is there a plan to support Nokia Multim...

    The existing NMT for Mac is working properly with N97 mini. Especially iTunes sync is not working. I did some research yesterday and found that N97 Music Library only detecting the song files in the Drive/Sound files/sound clips directory, but the NMT 1.4.1 is creating the iTunes folders in the Drive/sound files directory.
    When can we expect NMT to support N97 Mini? Also the Album Album is not displaying? I guess it's something to do with the image size of the album art. Please let us know the specification.

    Hi, try the search feature at top of page, also link bellow, drag and drop works well.
    /discussions/board/message?message.uid=577484#U577​484
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Re: marketing plan and campaign element

    Hi Dipesh
    Iam facing somewhat similar issue.
    My requirement is that everytime i want to create a new number for the campaign element. We are using the BAdi CRM_MKTPL to generate the Marketing/Campaign Plan number. And using the Coding Mask to generate the campaign elements. But when we delete some campaign elements and create new ones, the system used the same Ids that are previously deleted. I want only new number to be generated, i do not want to use the deleted Ids.
    How to solve this issue? Please suggest me some solution.
    Thanks,
    Raju

    Hi Rajesh,
    This is happening b'cos the Marketing Projects (Plans, campaigns and elements) which u r trying to upload are with same name (External ID) which u have deleted, try either (Rename)change the name of u r marketing Projects while uploding in system.
    System error : The external ID is already used in the description of another marketing project. To avoid data inconsistencies in SAP BW, the external ID cannot be reused.
    Regards,
    Dipesh.

  • Using a Mac Mini Server quad Core i7 for FCPX ?

    I am a student trying to
    configure a final cut pro X edit system with a budget of around $4K.
    I have over 400 hours of video (some Hi-8 but mostly mini-DV tapes).
    For the Mini-DV tapes I plan on ingesting video into FCPX
    directly from the camera via firewire DV. I will be using a Sony GV D800 to ingest
    the Hi-8 tapes via firewire DV as well. I already have a 30" Apple Cinema Display.
    H.264 will be used to deliver finished content to the web and/or Blu-ray.
    I was leaning toward the macbook pro 17" but then I realised that a Mac Mini Server
    could be configured with the same number of cores and RAM for less money.
    Mac mini Server
    2.0 GHz Quad Core Intel i7 -- same number of cores as macbook pro 17"
    8 GB RAM
    750 GB Serial ATA Drive 7200rpm + 256 GB Solid State Drive
    Mini DisplayPort to Dual-Link DVI Adapter
    Apple Magic Mouse + Magic Trackpad
    Other Peripherals:
    Promise Pegasus 8TB R4 Raid System in RAID 5 configuration or equivalent
    Sonnet Echo Express PCIe 2.0 Thunderbolt Expansion Chassis with
    Matrox Compress HD MAX encoding card
    LaCie d2 Blu-ray 12x
    Do the extra cores in the server make up for the difference in GPU?
    (2.7 GHz Mini dual-core i7 with AMD Radeon HD 6630M graphics processor with 256MB of GDDR5 memory) VS (2.0 GHz Mini Server quad - core i7 with Intel HD Graphics 3000 processor and 384MB of DDR3 SDRAM shared with main memory)
    Am I thinking about this configuration the right way? Is there
    any overhead given that the mini will be a server? Anything missing?
    thanks for your help,
    Tom

    Take it back for a replacement while you are within 14 days from purchase.

Maybe you are looking for

  • Closing Statements and ResultSets

    I just recently realized that you need to close Statements and ResultSets in order to avoid getting the "Too many cursors"-message. My question is: Do you need to close both Statements and ResultSets? - not that it's a problem... if so: Does it matte

  • Error while deploying or validating a mapping

    Hi!! I have a very strange problem. I try to deploy a mapping (I have changed today and i didn´t modify long time ago) and i get the next error: VLD-1141: Error interno durante la generación de correspondencia. java.lang.NullPointerException at oracl

  • IPod mega frozen

    Hello, Ok well I was on here like 6 months ago (almost to the day) and I had a problem with my 4th gen iPod photo. It locked up while changing songs. When I reset it, it went to the exclamation point thing with the www.apple.com/support/ipod thingy.

  • Appraisal document not trigerring to the part appraiser ID

    Hi All, In PMS,the appraisal document is not triggering to the part appraiser's ID.It is triggering to the direct manager (appraiser ID),but the document is not visible to the part appraiser.Can anybody throw some light on the issue.Help is highly ap

  • Honeycomb keyboard predictive text only showing names...

    Ran a search for this topic and found nothing. I have a Honeycomb tablet (Lenovo IdeaPad K1) and the keyboard is set to show spelling correction suggestions (I'm a terrible speller) but its only showing names of people in my contacts, its not showing