Mini CD Adapter

I have a 3" CD that I am unable to load into my iMac. Does anyone know where I can get an adapter? I called my local Apple Store and they do not carry it. I have also called several local computer retailers and repair shops to no avail. Searching the internet did not generate a single retailer except Amazon where it is out of stock. Thanks.

Any chance you have another Mac with a tray loading optical drive? If so, you could then make a disk image of the CD then transfer the disk image to the iMac.
Regards,
Patrick

Similar Messages

  • Airpot not connecting when mini dvi adapter is pluged in.

    Airport will not work when I hook up a display through the apple mini dvi adapter. When the adapter is unpluged I can connect to the internet. Does anyone know how to fix the problem. Thanks.

    Typically that is an indication the wireless connection is on the edge of reception and the added EMI from the display throws the connection off. What you want to experiment with is placement and proximity of devices. Move the wireless access point closer if possible. Move the display further away from the Mac if possible. Think about line of sight between the wireless access point and the Mac. Is the monitor sitting right in the middle between the two?
    You can also try changing channels that the wireless is working on. Sometimes that's enough.

  • Mini-DVI doesn't fit current mini-DVI adapter??

    I'm trying to do something relatively simple - connect a second flat panel display to my iMac. The problem is, the mini-DVI adapter being sold by Apple right now is a male plug, and my socket is also male. Argh!
    Is there a female/female adapter that will solve this problem for me? Help!

    Hello and Welcome to Apple Discussions, 
    The current Intel iMacs have a MiniDVI port which can use one of the following three adaptors:
    Mini DVI - DVI
    Mini DVI - VGA
    Mini DVI - Composite/S-Video.
    However, the iMac G4 uses the Mini VGA port and can use these two different adaptors:
    Mini VGA - VGA
    Mini VGA - Composite/S-Video (1.0/1.25GHz only).
    The iMac G4 can output Video or VGA but will only support display-mirroring (there is a firmware hack available to enable dual-display support on some iMac G4s but it is not 100% safe.)
    I think you've been sold the wrong adaptor.
    mrtotes

  • Display Undetected: Cintiq 12WX to iMac via DVI + Mini Displayport Adapter Thunderbolt

    Hello all. I'm connecting my Wacom Cintiq 12WX to an iMac 27-inch, Late 2013 (brand new) via a DVI cable connected to the iMac's thunderbolt port with a Mini DisplayPort to DVI adapter. Returning a "No Sync" response on the tablet, iMac is not detecting the display.
    The cable is DVI-D (Dual Link), the adapter is DVI-D (Dual Link), and the port on the Wacom appears to be DVI-I (Dual Link) except with a vertical socket for "Analog Ground" connection which is missing in DVI-D – but from my understanding this shouldn't be an issue. Could be wrong, not my area of expertise.
    However, in the past I have used this device with a Late 2008 Macbook and a DVI to Mini DVI adapter to the Mini DisplayPort, back when Apple was pre-Thunderbolt, same cable and it worked like a charm.
    I've contacted Wacom's support, but they usually take a day or two to get back so I'm hoping someone here can shed some light.
    Thanks in advance.

    yeah thats how I connect my 24" dell
    minidisplayport is the same connector as thunderbolt

  • Mini DVI-Adapter Not Working

    Today I went to the Apple Store and got myself one of those fancy new Mini-DVI to DVI adapters, hoping it would work with my screen at home, which I had previously running on the Mini Displayport to VGA Adapter on my original MacBook.
    Strangely, when I plugged the cable into the adapter, and into my computer, nothing happened. I did not get video on the screen, nor did my MacBook detect it. I have tried re-plugging the Mini-DVI adapter and clicking Detect Displays in the Displays Preferences multiple times, but no luck.
    I have seen the screen work with DVI about a year ago, but that was on one of the original MacBook Pros. Am I better off returning this DVI adapter and instead buying a Mini-DVI to VGA Adapter?
    Thanks for any help in resolving this problem.

    I have a 22 inch ViewSonic that I got from a friend about a year ago. I did indeed plug the monitor directly into the adapter.
    I brought my computer, adapter and cable all into the Apple Store, and they said it was all OK, but did replace my DVI adapter thinking it was probably defective. I got home, tested it on my monitor, but still not working. I tested it on a newer HP monitor that's on the family computer, and oddly it worked there.
    A bit of research revealed that the adapter did not send Analog signals on DVI anymore, which confuses me, since the MacBook actually does have Analog signals on that port. I brought my DVI adapter in original packaging in to the Apple store again, and they replaced it with a VGA adapter for free, and sure enough, that solved the problem for me.
    Lesson Learned - don't use DVI with older monitors, stay with VGA.
    Message was edited by: theocas

  • Can't work with Macbook mini-dvi adapter to s-video out under Windows..??

    hi..
    My macbook can work well with mini-dvi adapter to tv out under mac os,but it can't work under windows os..
    If anyone's using their Macbook and has any comments please let me know..
    Thanks.
    Richard

    Yes, if you can get an s-video cable and plug that into the SCART adapter, that would be better than plugging in composite video.
    Clearly, having an SCART connection is not going to "improve" the video going in, you're going to be limited by the lowest quality connection. An s-video connection will provide a higher (but probably not a lot) quality signal than composite video.
    -Doug

  • I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

    i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

  • What kind of picture quality can I expect from a Mini DVI adapter to Scart?

    I currently have my iMac connected to my tv via the Apple Mini DVI adapter and a composite video cable. There are two problems with this, one is the poor picture quality in general, the other is that the tv screen is not filled by the image from the iMac, i.e. there are black spaces on the left and the right of the screen.
    So my question is, if I used S-Video to Scart, would it kill the problem with the black borders when viewing Front Row etc..? Also, would there be a significant increase in general picture quality?

    Yes, if you can get an s-video cable and plug that into the SCART adapter, that would be better than plugging in composite video.
    Clearly, having an SCART connection is not going to "improve" the video going in, you're going to be limited by the lowest quality connection. An s-video connection will provide a higher (but probably not a lot) quality signal than composite video.
    -Doug

  • Is the Mini-Dvi adapter suppose to click into the back on the Mac mini?

    Is the Mini-Dvi adapter suppose to click into the back on the Mac mini? It does on my mac book but not on the Mac mini. I sort of have to just jam it in there, no nice clicking sound, and it does not feel very secure.

    If after 'jamming it in there' it actually works, then at least you know it's the correct type of adapter. However, if it doesn't work, you are definitely not inserting it correctly or into the correct location. In either case, you may have a damaged port - all the connections on the rear when applied correctly with anything like a decent quality standard type connector should work smoothly. You should never have to 'jam' anything into the back of your mini.

  • Help! Problem using Mini-DVI adapter

    I'm a teacher, and I need some help.
    I've been using a Mitsubishi XD 250 data projector at school. The setup I have is exactly the same as it was last year, but something strange is happening.
    The data projector uses VGA, so I have the VGA-to-Mini-DVI adapter from Apple.
    I turned on the projector this morning, as I have a presentation for one of my classes today, but it's not working! The projector comes on, and the iMac shows that it recognizes the external display, but the projector says "No Signal." I have no idea what the problem is, as I've tried restarting both the iMac and the projector as well as connecting and disconnecting the cables.
    Any suggestions? I suppose it's possible that something happened to the VGA cable over the summer, but is that likely considering that the iMac recognizes the external display?
    I really need to give this presentation today, so any help would be greatly appreciated!

    Dett;
    It is probably simply the wrong signal source being set on your projector. This is normally a remote control switch or your projector. I don't know this model but they all have multiple input choices. Change the input until you see your Mac.
    Hope this helps
    Steppenwolf

  • How do I get a Mini DisplayPort adapter and HDMI connection working for my Older MacBook Pro?

    I bought a Belkin Mini DisplayPort adapter and attempted to hook it up on two different tvs using two different HDMI cords. I've always received a "no signal" message. I haven't even been able to get my desktop to appear. My display settings doesn't include a mirroring option and I only have the option to use my computer as a sound output. I've called apple support and I went to geek squad. Is it just impossible for older MacBooks?? I have Snow Leopard 10.6.8 and all of the forums I've read say that video should work at least. I switched out my adapter for a rocket fish one and still no luck. The geek squad employee couldn't get it to work on either adapters. Please Help!

    I upgraded my OS to Mountain Lion and now it works perfectly. However, I'm getting random green and black splotches on my screen when I'm not using it with the TV.

  • External monitor loses signal to macbook pro through DVI cable and Mini DisplayPort Adapter

    Hello,
    So I had my external monitor connected to my MBP with a DVI cable and a Mini DisplayPort Adapter, for a while already. But sometimes, the monitor would lose signal from the laptop and gives me a white noise screen. Now, the monitor can't receive signal at all, even after I got a new Mini Displayport Adapter. When the monitor and the MBP is connected by the cable and the adapter, the monitor would say "no signal" and the MBP screen would flicker (I think it's trying to connect to the monitor, but can't). The new Mini Display Port Adapter also makes the screen flicker, so I'm not sure if it's the problem is at the adapter or the DVI cable. I'm pretty sure it's not the monitor.
    What do you think? Have you ever have a screen flickering problem when your MBP is connected to an external monitor?

    I have had the same problem.  By following your suggestions I got to arrangements.  I could not send them off to the side.  When I hit the mirro disply key everyting worked.  I got it solved by clicking in arrangements and setting displays to mirror display.
    I am still have a problem of no sound coming through my tv.
    Rolland

  • Apple's mini-disc adapter

    i know that Apple recently got a patent and whatnot for a mini-disc adapter thing (http://www.appleinsider.com/articles/07/11/29/appledeveloping_mini_disc_adapter_for_slot_loadingdrives.html) but does anyone know when said adapter will be available to the public?
    thanks

    You will know when we all know - When you see it for sale on Apple's Online Store site.

  • Displayport Mini- hdmi adapter+hdmi-hdmi+TV problem

    Hi! I just bought displayport mini>hdmi adapter and hdmi-hdmi to my 37inch Full HD Panasonic LCD TV. Have problem like this on my TV when i plugged it-> http://yfrog.com/6dtvongelmaj those lines are moving up and down and they are different color when i am on my desktop.. Sorry my english

    No one knows? f*ck...
    Message was edited by: Uppis

  • Mini dvi adapter

    will the cords i bought a while back for my ipod to play photos on a tv(http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7CB C356E&nplm=M9765G%2FB) work with this?:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E07A&nplm=M9319G%2FA
    Thanks.

    I assume you want to send the video from your mac book to some kind of external display.
    in that case then no the cables you have will not work since they have a mini jack at one end.
    The mini dvi adapter is for sending video out of your mac book to a tv /projector or display through an S video cable (audio and video) or an RCA cable (video only). If using the mini dvi with rca you could plug your current cable into your headphone out jack and use the red and white part of it to send audio to a tv or external speaker.

  • Mini HDMI adapter to 55" tv, Not Available error, still see screen

    basically i have a Mini HDMI adapter connected to my 55" tv, I have run the tv all day like this with no problem watsoever, but now an error message has popped up over top of (i can still see all the computer stuff i should on the tv, using it now actually) but the error message says (Not Available) i'm assuming this Not available message means that the connection is not available to the computer, but its in the middle of the screen over top of my streamed computer, my computer is running on the tv still, it just has the "not available" error right in the middle of the screen & won't go away.
    sorry for the long msg i'm not good @ explaining things.

    Update again, error has popped up again & won't go away this time.
    Did i get a faulty adapter? I know the HDMI cord itself is good, as well as the port on the tv as i have used both with other devices without problems
    anyone that can possibly explain what is going on please do, I am starting to get really irritated,
    & just a guess, this error has occured when opening full windowed items such as a video i tried playing, & then a game i tried opening, it was fine each time running safari & skype until i tried opening those full windowed items, would that make any difference? if i can fix it again i'll try my theory,

Maybe you are looking for

  • Photoshop Elements 12 compatible on my mac?

    My mac has a 2.8 GHz Intel Core 2 Duo processor. Will Elements 12 work on my mac? I have 8GB Ram, plenty of hard drive space, OX X 10.9.2. Also, I have elements 9 and it really slows down my computer. Is 12 faster? Thanks.

  • 0x8004fceb error

    I have a BB Pearl 8100. My harddisk was reformatted and I moved from Outlook 2003 to 2007. I loaded all my contacts in 2007 and now when I try to sync addresses from Outlook to my BB, I get 0x8004fceb error. The last lines in the log file are    Cont

  • Some Pulldown Advice Needed

    I'm working with some video of legacy films, some >50 years old. Unfortunately, much of the original film is unavailable to me. What I have is either DVD or sometimes VHS copies of the telecined results. When I read about pulldown, it talks about a 3

  • My app got deleted now when i go to try to download it again it says i need to update it but it wont update

    help

  • How can I send a MIDP through MMS??

    Hi there, I need to know how can I send a JAR through MMS, I'm not talking about WMA API..... please, understand that I don't want do send a MMS through JAVA or J2ME or MIDP. I want to send my compiled midp in a JAR, in a MMS.