Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

I know this problem has been around for a while, and that there are several other discussion on it, but my goal here is to point out that even in mid-2011, this issue remains.
Here's my configuration:
30" Cinema Display
Dual-link MDP to DVI adapter with 1.03 firmware (purchased August 2011 from an Apple Store)
New-ish MacBook Pro (purchased December 2010) with Mini Displayport
Symptoms:
On dark areas of the screen, DVI noise appears (horizontal flickers of light coming and going at random)
Attempted Fixes:
Unplugging the display and plugging it back in to the computer (failed)
Restarting the computer (failed)
Tightening the connections on the Dual-Link DVI adapter (failed)
Sleeping the display and awaking it (failed)
Some suggest getting a new 27" Cinema Display with native Mini Displayport/Thunderbolt support. I actually have one, but I cannot tolerate the glare on the glossy displays, so I'm "downgrading" to a 30" Cinema Display.
Is there any remaining hope for this issue?

I still cannot understand why you would return everything... Ultimately you want this computer right? Once the bugs on the adapter are fixed are you gonna go back and re-buy it?
Seems like a lot of time spent out of spite and not for good reason. Me, this is the best Mac I've ever owned (and I've owned many. no, really.) and I'm happy to wait for this adapter w/ this machine in stead of going back to my other box.
I observed a similar client of mine w/ an iPhone... after the first week, he didn't like the keyboard and a few other things, so he took it back and went back to using his Blackberry -only to dump the Blackberry again for the iPhone, because he realized that the iPhone still did more things better than the Blackberry.
J.

Similar Messages

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Mini displayport to dual-Link DVI Adapter - flicker issue resolved

I have a late 2013 Imac 27 inch and I had a 30" Dell 3007wfp as my second monitor on the standard DVI adapter for a while at low resolution. I finally got off my behind and bought the mini displayport to dual-Link DVI Adapter... I was excited to see it in all it's glory. It immediately started flickering wildly and I thought I'd do some reading to see how I could resolve it. Pointers to making sure the adapter was version 1.03 didn't help.
http://support.apple.com/kb/ts3232
I already had it. I was getting ready to bite the bullet and just take it back when I decided to see if I had another DVI cable to swap the one I was using out "just in case". I found another one.. same length. Darn it. Then I noticed the DVI cable diameter I was using was significantly thinner than the one I found in my box of etc... What the heck? I thought.
Connected it and BOOM! Vivid colors, high resolution, no more flickers!! Issue gone. Happy days!
Thought I'd post this to possibly help the next schmoe who is in the same situation

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

17" MacBook Pro to 30" HD Display issue using Mini DisplayPort to Dual-Link DVI Adaptor.

Just replaced the Western Digital hard drive on my MacBook Pro with a SSD now running Lion 10.8.2, (updating from Snow Leopard latest version).
I have a 30" HD Apple display monitor and very much love using it.
The issue.
The MacBook Pro will only allow the 30" Monitor to display its top resolution when the unit is closed, when it is open it shows either 2 screens or mirrored screens depending upon the settings, but not at the top resolution capable by the monitor.
Now, when I was using Snow Leopard on the previos hard drive, I could close the MacBook Pro and put the computer to sleep also putting the 30" Monitor to sleep, I could then wake the computer while it was closed with my external keyboard and the screen would wake showing the FULL resolution possible on the 30" Monitor.
Then I could open the lid of the MacBook Pro and the screen would stay black allowing ONLY the 30" HD Monitor to be used effectively as a desktop computer, without the complication or need to display 2 screens or mirrored screens but most importantly the fans wouldn't need to work overtime due to the MacBook Pro being closed cutting off vital ventilation through the 2 air ducts to the left and right of the keyboard.
For some reason I cannot do this with Mountain Lion, the compluter needs to be closed in order for the 30" Monitor to display top resolution, and the fans are working overtime and the unit is getting really hot.
My concern is that the MacBook Pro will overheat, the screen will be damaged as the MacBook does get exceptionally hot when running design and audio packages, even Adobe Flash sets the fans off, and lastly the computers speakers are muffled which is more of a moo point.
If anyone could shed some light or offer a solution I would be most appreciative.
My specs:
MacBook Pro 17" Mid 2009 3.06 Intel Core Duo, 8GB 1067 MHz DDR3, NVIDIA GeForce 9600M GT 512 MB, OS X 10.8.2 - connecting to an Apple 30" HD monitor with a Mini DisplayPort to Dual-Link DVI Adaptor.
Thanks
Christian Zav

Thanks for your quick reply! I want to think I'm not technically challenged, but... are you saying to go from minidisplay on macbook directly to the firewire in the back of the monitor? Or should I try to attach it to that ugly bunch of cables at the end of the monitor cable (dvi, usb, firewire and the power adapter thingy)? Either way, it seems like I might need yet another cable? Like Mini-display to... ?
I feel like my mother asking these questions... At any rate, when I called the guy at apple support last time he acted like it was a Miracle that I had anything on my cinema display at all if I had a minidisplay cable plugged into the thunderbolt port. He said that didn't work (but obviously it did, at least a little) I DID get a picture, it just wouldn't display at the 2560x1600 resolution. More like 1680xsomething. fuzzy and big. I want my pretty picture back.
Thanks so much for your help.

Apple's Mini Displayport to Dual link DVI Adapter... What to do?

So i'm doing a new setup with 6 monitors (Eyefinity 6), and i've got everything set up so far... Except for adapters. So i went and got 4 Of those Accel MDP to DVI SL adapters, in addition to the two passive that come with a card. Didn't work...
So i got two Apple Mini Displayport to Dual Link DVI Adapters... And boy, I should have read the reviews before buying them. They are giving me very strange issues. Not going above 800X600, serious graphics corruption on the monitors connected to the apple adapters, or odd resolutions that the monitors do not support.
So i'm wondering what to do. If possible, i'd like to get these to work somehow, as i got them for cheaper than other MDP to Dual Link adapters. They are both plugged in to the USB ports of my mac pro.
I've also heard something about a firmware version, 1.2 or something. Is there a way to update the firmware of these?
Thanks
-C

I'm using the Sapphire 5870 Eyefinity 6 Edition. Two of them in crossfire, supplied their power from an external 1200W PSU Devoted just to them.
It's under Windows 7, running on my mac Pro 2.26.
Hooking them both up to a iphone cube-wall charger keeps them up and running, but they fail to supply the necessary resolution (One only registers 640X The other dimension, the other thinks the monitor is 1920X1080, when it really is 1920X1200).
Not to mention, attempting to use any of them in an extended desktop led to a MACHINECHECKEXCEPTION bsod.
I can't find any sign of what the whole issue is, i'm having issues with the eyefinity setup itself too, so i dunno if its the adapters, the card, drivers, or what. The apple adapters are acting up on me though.

Switching between Dell 4K display and Apple Mini DisplayPort To Dual-Link DVI Adapter

Hi All,
I've recently upgraded my home setup to a Dell 4K display (Dell P2815Q), which since the 10.9.3 update work as expected.
However the downside is that my office setup uses a Mini displayport to Dual-Link DVI adapter (Firmware version 1.03) and a Dell 30" display (2560x1600), which will not work without a reboot after using the 4K display. If I use the 4K display after using the Dual-Link DVI adapter it works fine.
Is this a know issue ? If not, I'm happy to provide some more diagnostic information to help resolve the issue.

http://www.everymac.com/ says:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI.
DVI is not mentioned at all. You probably need to connect to the display via HDMI to get the 4096x2160 resolution.

Problem w/New MacbookPro, Cinema 30, Mini DisplayPort to Dual-Link DVI Adap

Hi, I have a new MacBook Pro with Miniport connected to a Cinema 30 using the Mini DisplayPort to Dual-Link DVI Adapter. I upgraded from the previous version of the Macbook Pro w/built-in DVI and never had a problem.
From the moment I started using this new miniport adapter with the Cinema 30, I noticed intermittent graphic anomalies. Most of the time, discolored lines will start rapidly popping in and out across the screen - especially noticeable with dark backgrounds. Here are a couple of quick videos that visualize the problem.
Video 1 - http://is.gd/krM6
Video 2 - http://is.gd/krLT
I'm also experiencing issues with the cursor randomly jumping across the screen.
It's isolated to the 30 cinema and the adapter. The Macbook Pro works fine when connected tot he new 24" LED Cinema.
Any advice on what to do? Is it a faulty adapter? Is there a SW/Firmware upgrade?
Thank you!
http://store.apple.com/us/product/MB571Z/A?n=cable_adapter&fnode=MTY1NDA5OQ&mco= MjkyNjI0Mg&s=topSellers
Message was edited by: bsolis

I'm having the exact same problem. Have you called Apple and if so, what did they say? I read in a magazine that you can switch to the NVIDIA GeForce 9600M GT graphics processor some how with in our computer. I don't know how or if this may solve the problem.

MBP + Mini DisplayPort to Dual-Link DVI Adapter + 30" = blue flickering

Hi everyone,
I was wondering if anyone has found a solution to this problem? I use an Apple 30" Cinema Display and it worked fine with my Late 2007 MBP. Now I got a new Core i7 MBP and the Mini DisplayPort to Dual-Link DVI Adapter. At first all works fine, but after a while of use I get blue (and sometimes also green) flickering pixels in areas that are supposed to be black. This does usually not matter while working, but watching movies for example is completely unbearable.
I’ve read a few threads, but most seem to have different problems like 1/3 of the screen flickering or the external display going completely off for a second. That is no issue over here. It is just that the longer I use my setup the more flickering gets added. At first I thought I don’t suffer from this, because it goes from practically flicker-free to totally weird flickering when everything is in use for more than a few minutes.
I’ve set up the Computer Name screensaver. If I run it right after turning on my MBP all is fine. Running it again after 2-3 minutes of use shows the first blue pixels flickering. It does not need 30 minutes to arrive at what seems like more flickering isn’t possible anymore...
Any recommendations or solutions are really welcome!
Things I already tried:
- different USB ports for both the adapter and the Cinema Display
- other power outlets
- powering the adapter from a USB hub or via an iPod wall charger
Thanks
Björn

Björn Herrmann wrote:
I would even try out crazy adapter combinations if there were any available...
At last! I’m quoting myself, because I finally found an alternative adapter which works! I have no more flickering pixels/lines. Black looks and stays completely black as it should! I can finally use dark backgrounds again and watching movies with black borders or dark areas is no longer a pain.
The adapter was very hard to get. It currently is not sold here in Germany and I got it off eBay where there was only 1 available. I’m happy, because I got it for less than 90€ which is even a little cheaper than Apple’s flicker-creator.
The adapter I now use is the Sapphire Active DisplayPort-to-(Dual-Link-)DVI adapter. It has a USB connector for power like Apple’s adapter. The only thing that’s added is the DisplayPort-to-Mini-DisplayPort cable since it is not available with Mini-DisplayPort. Here’s a picture of it:
Hope this helps others, too!
Björn
PS: This adapter seems to be normally meant for ATI’s GPUs in order to connect 3 displays which they call Eyefinity.

Mini DisplayPort to Dual-Link DVI Adapter 1.03 - screen goes black and won't come back

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues as so commonly described, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. Is anyone else seeing this issue?

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Mini DisplayPort to Dual-Link DVI Adapter

Hi, I am using the Apple Mini DisplayPort to Dual-Link DVI adapter to connect my 30" Apple Cinema Display (Aluminum) to my MacBook Pro 13" Retina, I am passing through the Belkin Thunderbolt Dock, so I connect the Dock to the MBP via the Thunderbolt port and then I connect the Mini DisplayPort to Dual-Link DVI adapter to the Belkin Dock and then to the Apple Cinema 30".
One of the issues I am having is that with the Cinema Display I am working at 2560 x 1600 resolution, much larger than the native MBP resolution, I am also using my apps in Full Screen mode, so when I disconnect from the Cinema Display and go back to use the MBP the apps in full screen mode still are at a higher resolution than the native MBP resolution and they are off the screen. Is there a way to manage a profile with different resolution so the Mac OS will switch automatically resolutions?
Also does the Apple Mini DisplayPort to Dual-Link DVI adapter usb cable supports USB 3.0 ?
Thanks

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

Mini DisplayPort to Dual-Link DVI Adapter - Firmware 1.03 Release Date

Starting what manufacturing date the Mini DisplayPort to Dual-Link DVI Adapter shipped with Firmware 1.03?
I am looking to buy one in the market, unfortunately no Apple Store in Saudi Arabia, and I am finding 2008 product only. Is this good?
Thank you,

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?

Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?
Will a different adaptor give me better resolution between my old computer and a new monitor?
Computer: MBP 15-inch Mid 2010
Monitor: Dell U2713H
Current cable: 20276 3dv ft1 DVI Digital Dual Link with a Apple Mini-DP to DVI adapter to get it to plug into my MBP.
Possible solution?: Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter instead of my old adapter above?

Yes. A single-link DVI connection can't drive that monitor at its maximum resolution.
(110544)

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

Trouble Playing DVDs with Mini DisplayPort To Dual-Link DVI Adapter ?

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter for my 30" Cinema display to connect to my MacBook Pro.
I open up Apple's DVD player and the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

You've probably fallen into the nasty pothole created by the advent of HDCP compliant graphics on Apple computers and a mishmash of older and newer Apple gear that does/does not support HDCP.
Ironically, if you were using an older Mac notebook (prior to late 2008), everything would play just fine because HDCP wouldn't come into play anywhere.
That is my guess as to what is happening.

New iMAC to Dell 3008 using Mini DisplayPort to Dual-Link DVI Adapter

I just brought the new iMAC 27" iCore7. Previously I was using old MBP with dual link DVI to DELL 3008 and they did fine.
But Today I connect the Dell 3008 to my new iMAC using Mini DisplayPort to Dual-Link DVI Adapter...They could not work properly...
The dell shows images in red with flickers....
I've contacted the phone for help...and they said nothing could be done????!!!!!
Anyone could help??
THX

just update my progress...
I had made calls to Apple technical support center in HONG KONG for help...
To my surprise...they even did not understand what I was saying(Or just pretending...)....One interesting guy said I could take the new iMAC back to service center to change the 4850 display card to older version...or call DELL for help!!!!!
Fuxking Apple technical support center in HONG KONG
I was almost hopeless until I found a minidisplay port to display port cable in Circuit Assembly:
http://estore.circuitassembly.com/products/Mini-Displayport-to-Displayport-Adapt er-Cable.html
ONLY $14.95 !!
They sent the cable to me in 3 days time...and I hooked it up right away when I received it today...my Dell 3008 could display 2560 x 1600 normally again!!!!!
The problem is: Apple is still selling its FUNCTIONLESS Mini DisplayPort to Dual-Link DVI Adapter at high costing....sounds like cheating others....
What' s wrong with the Apple nowadays???

Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

Similar Messages

Maybe you are looking for