Mini displayport to HDMI (audio compatible)

Bought mini displayport to HDMI cable to connect new imac (21.5" i3) to tv (SONY bravia). It says it is audio compatable but its not sending audio, video works fine though. Any ideas?
Thanks

all hdmi cables will support audio what you need to fins out is if your mbp will output audio from the mdp there are a few ways to find this out easiest is if you bought the computer after april 2010 then it does you just need to get the right adapter this one works with both both video and audio http://store.apple.com/ca/product/H1824ZM/A?fnode=MTY1NDA3Ng&mco=MTgwOTAzMjI have fun

Similar Messages

  • 2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
    On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

  • Mini DisplayPort to HDMI Adapter plays video but does not do Audio

    Ok I was told by someone at the Apple Store durring my one to one secession that I could get a mini to HDMI cable and the video and audio from my laptop would be displayed on the TV.
    This was the cable I was told to get http://www.amazon.com/gp/product/B0025V2VO0/ref=oxya_ohproduct
    Mini DisplayPort to HDMI Adapter (female) Cable for Apple Mac
    Now it displays the video on the TV but no audio.

    http://en.wikipedia.org/wiki/Mini_DisplayPort
    Apparently it's the current range of MBP's that's the issue. In theory, the displayport standard supports audio.

  • Mini DisplayPort to HDMI Adapter... no audio

    i just purchased a Mini DisplayPort to HDMI Adapter for my MacBook Pro 2012 and have connected to my TV. I have video, but no audio. Does anyone know how to get the audio to work?

    I might be wrong but the MBP 2008 does not have audio supplied capability over MDP to HDMI.
    http://support.apple.com/kb/HT4241

  • Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

    can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

    Should work perfectly.

  • Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

    Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

    Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
    If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
    and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
    Good luck Derek

  • Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

    connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
    hello everyone.
    if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
    i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E  and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
    I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
    i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
    im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
    just please give me anything you can on this topic
    thank you so much,

    With a 2009 MacBook Pro, you need to use two connections to your TV: one for video and another one for audio.  The miniDisplayPort on the 2009 models does not support audio, so you need a separate audio cable:
    miniDisplayPort adapter for video - I use the Apple miniDisplayport-DVI adapter + a DVI-HDMI cable like this one
    audio cable for audio - use a 3.5mm male stereo-to-2xRCA male cable like this one
    Connect the miniDisplayport adapter + DVI/HDMI cable to your MacBook Pro's miniDisplayPort output and the HDMI input on your TV
    Connect the audio cable to your MacBook Pro's audio out and your TV's audio in
    The only potential gotcha is if your Hisense TV requires audio via the HDMI cable when you use an HDMI cable.  The H3e user manual is unclear about this.

  • No audio via Mini DisplayPort to HDMI Adapter

    I have a late 2008 model (MB470LL/A) 15" MacBook Pro running 10.6.7.
    I purchased a Dynex Mini DisplayPort to HDMI Adapter that's not picking up the audio signal. The video plays  fine via HDMI to our TV, but no audio.
    In looking online I've seen this is a known issue. Has anyone discovered a work around other then running a separate audio cable from my computer to the TV?
    I'm really surprised there is no audio this way. Someone dropped the ball on this one.

    I might be wrong but the MBP 2008 does not have audio supplied capability over MDP to HDMI.
    http://support.apple.com/kb/HT4241

  • I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

    I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

    Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
    My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

  • Mini Displayport to HDMI Adapter - Sound?

    I have hooked up my mini by the Mini Displayport to HDMI adapter to my Philips FlatTV. Sound is only played by the internal mini speaker, not from TV.
    According Apple Support the sound should be working on the TV when using the adapter. They reckon my adapter is broken.
    I know that there is no sound from the Minidvi to HDMI adapter unless you use external audio cable, but with the Mini Displayport?
    Has anyone actually managed to make this work?
    Thanks!

    As already pointed out in this thread, Apple currently do not support routing audio out via the Mini Displayport connector even though the Displayport specifications allow for this. Therefore a 'standard' Mini Displayport to HDMI adapter will not be able to provide audio since the Mac will not be sending it.
    However many people have been disappointed with Apple's omission and as a result at least one manufacturer of adapters has developed a solution to workaround this.
    If you look at http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5311&seq=1&format=2 you will see the 'standard' style Mini Displayport to HDMI adapter which due to Apple, does not currently provide audio. If you however look at this model http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2 then it gets round the problem by connecting to both the Mini Displayport on a Mac and the Mac's Mini TOS-Link digital output and then 'merges' them together before sending them out via a single HDMI cable. This would therefore provide audio to your TV.

  • HT4241 Mini DisplayPort to HDMI adapter, no sound

    I've bought a Mini DisplayPort to HDMI adapter when connected to my SONY BRAVIA, it only showed video, the audio sound still came from my laptop not from my tv? shouldn't HDMI support both audio and video

    I believe the 2010 and newer ones support audio through the HDMI cable. Earlier MBPs will require one to tap the audio output port and run separate wires to the RCA audio input connectors on the TV.  Also you might check your Sony user manual to make certain that you have it set up correctly as well as the MBP.
    Ciao.

  • Mini DisplayPort to HDMI adapter with sound

    There are 2 Mini DisplayPort to HDMI adapters that combine sound into the HDMI signal, http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5969&seq=1&format=2 (one that uses USB for the audio) and http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2 (one that uses the mini TOSLink for the sound). The USB sound one is cheaper, but does it output a true 5.1 signal? I know the more expensive TOSLink one will, but if possible I'd like to get the cheaper adapter. If it outputs a 5.1 signal, I can get the USB sound adapter, otherwise I'll get the pricier TOSLink one. Thanks, Zach

    Only the adapter with Toslink can supports the 5.1 Channel audio. You can get the product through the Link: http://www.cablematters.com/pc-56-26-mini-displayport-male-and-toslink-audiousb- male-to-hdmi-female-adapter.aspx
    There is more helpful information on its site and has Youtube video. http://www.youtube.com/watch?v=oc1zI7LMlls

  • T430 1600x900 i5 Core: Mini DisplayPort To HDMI 1920x1080 TV Resolution And Sizing-Overscan Problems

    Hello, and thanks in advance for any help.  Also, my apologies if these issues have been previously resolved; I've spent 2 days searching for answers and none of my effort has resulted in a solution, either here or elsewhere.  
    I very recently for the first time connected my ThinkPad T430 2344-5GU (i5 core, native screen resolution 1600x900, Intel HD 4000 v9.17.10.2843, NVIDIA Optimus NVS 5400M v9.18.13.1100) to a Panasonic HD TV (native screen resolution 1920x1080) using a Mini DisplayPort to HDMI connector, with the hope of playing 1080p movies on my laptop while watching them on the TV.  This seemingly worked fine at first--both audio and video were present--but I quickly noticed that the image on the TV was, very slightly, larger than the image on the laptop screen (cutting off roughly 5% of the image on each of the 4 sides) and that the resolution wasn't 1920x1080.  So I hunted for a solution.  
    Windows display properties were no help.  In fact, as soon as I tweaked something there I lost the picture on the TV (the options available are "Show desktop only on 1" (the laptop screen), "Show desktop only on 2" (the TV screen), and "Extend these screens", which annoyingly turns the TV blank yet allows the cursor to to enter the TV screen depending on the chosen layout and the cursor's approach direction to the TV).  So, from having a functional-if-slightly-oversized-and-lower-quality picture on the TV screen I went to nothing, at least for my desired use.  
    Further research led me to the Intel HD 4000 settings, but those didn't even show that multiple screens were in use when the TV is attached.  Finally, I tried using the NVIDEA Control Panel, but although multiple displays seem to be supported the best I can do when cloning is have the screens' resolutions meet in the middle at 1440x900, which makes them both look worse than the original plug-and-play result described above.  Heck, I went so far as to enter the BIOS and try every combination possible under "Graphics": no NVIDEA, Integrated, Discrete, each with and without "Auto Detect NVIDEA capability" enabled and disabled.  I even updated the NVIDEA driver to their newest, a version not available at the Lenovo Support site.  Nothing.  And worse, ever since my very first tweak under Windows display properties I wasn't able to return to the original  functional-if-slightly-oversized-and-lower-quality picture.
    At this point I used a very recent image to return my system to it's Pre Original Tweak state (allowing for the  functional-if-slightly-oversized-and-lower-quality picture originally obtained), which is better than nothing, I guess, but surely not what I'd expect from a higher end laptop.
    Please, does anyone know if there's a way to connect my T430, native resolution 1600x900, to an HD TV, native resolution 1920x1080, while actually maintaining each screens respective native resolution and not losing any of the image?  Thank you again for your time.
    Edit:  After more research I've fit the desktop image to the screen by adjusting the TV's "Picture/Advanced picture/HD size" setting from "Size 1" to "Size 2".  Now my only question is if it's possible to somehow play a 1080p movie at the TV's native resolution of 1920x1080 or if I'm stuck with the laptop's navtive resolution of 1600x900.

    Try grabbing the latest NVIDIA driver off of the NVIDIA website. It might help.
    Extending it should also allow you to run the 1600x900 T430 screen plus the 1920x1080 TV screen each at their native resolutions.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Mini displayPort to HDMi Adapter for Macbook

    ALCON,
    I need your assistance i recently purchased a mini displayPort to HDMI adapter for my Macbook to view my movies from ITUNES on my HDTV. The problem im having is there is no picture or sound on the HDTV once i hooked it up to my tv. My question is am I doing something wrong. My Mini DisplayPort To HDMI adapter supports Video and Audio Output to HDTV. Please help... Thanks
    Redskins40

    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

  • MacBook Pro 13" mid 2010 model (7.1): Mini Displayport to HDMI , no Sound

    I bought my MacBook Pro on October 2010.
    Also, in the SystemProfiler I can see that the "Audio Built-in" has HDMI in the list. And my macBook Version is 7.1 and am having OSX 10.6.7
    I recently bought Sony Bravia KDL-40EX720 LED HDTV. And tried connecting the Display using a Mini-DisplayPort to HDMI. The Video works fine but cant get audio working. Also, the SystemPreference->Sound->Output has only Internal Audio in there.
    Today I even tried with my office LCD HDTV from Samsung and Toshiba. Got the same result .. no Sound.
    Where as my Father's MacBook Pro 13" which he got a couple of months earlier than mine got both Video/Audio working on his Panasonic Plasma TV. He is also using the same MiniDisplayPort to HDMI adapter I am using. But as I live some thousands miles away from home i can't check by connecting the Panasonic with my MacBookPro.
    I have been looking out the forums and post all over the internet for any solution or relief but none so far. I still haven't had a clue if its the TV or the MacBook thats having this audio via HDMI issue.
    Any, suggestion will be highly appreciated.
    Regards,
    Sapam

    I have the same MBP Version 7.1 that you have and it also states in the System Profiler HDMI Display port
    Output: Connection : Display. Now what that means, im not sure.
    But i have also connected an HDMI cable via an adapter made by iWires Tech Link purchased at the Apple store and have the same problem as you, only video with no sound from the TV.
    I've looked at the settings that eww has suggested in System Preferences > Sound > Output tab and their is no options available for HDMI out, or Display Audio or anything else for that matter, except built in speakers, and Audio port for sound output.
    Which lead me to use the Audio port to send the sound out via an amp and speaker system independent to the TV.
    Thats why i researched for the other adapters which send out the sound and the audio through the same adapter.

Maybe you are looking for