Mini Displayport to VGA adapter

Hello, I am new to the forum so excuse me if an answer has been posted. But I just bought a 13" aluminum macbook. I bought a minidispla port to VGA adapter and plug it into my new panasonic 42" plasma tv. What I get is my desktop picture only from my computer. I can't see the mouse pointer, icons or any thing but the "world desktop picture". I went on line and downloaded the firmware for the adapter, rebooted and got the same thing. My TV screen shows SVGA/60hz when I plug it in so it is recognizing my computer. Can someone give me a fix. I am stationed in Italy and want to stream some football games and shows from the States but I want to watch it on my big TV. Any solutions would be welcomed. This is my first Mac and really my first problem ever. Thanks again! Eric Stone

sounds to me like it's set up as a second monitor... your dock etc. is still on the macbook screen and the TV is a second monitor... if you drag your cursor to the side of your macbook screen you should be able to move the pointer over to the tv... this is so you can use both screens at the same time... one for videos and one for mail etc. for example... if you want to have the same screen on both monitors then you should follow the other posters advice...

Similar Messages

  • Apple Mini DisplayPort to VGA Adapter flickers

    I have 2 Samsung SyncMaster 23 in, HD Displays connected to my Mac Mini. The Display connected via the Mini DP to VGA adapter flickers erratically. This started happening after installing the latest upgrade of OSX Mountain Lion. I called Apple support, they gave me a list of steps to try to fix the problem, which I followed to the letter, to no avail. The problem is annoying, to say the least. I tried to find out if there was a firmware update for the adapter, but I am running the latest firmware (1.03).
    I would appreciate any help to solve this issue.

    Thank you for your message.
    1. Both monitors only have VGA input.
    2. The other adapter, Mini-DVI to VGA has always worked properly.
    3. The Mini DisplayPort to VGA adapter is an Apple original product I bought at an Apple store. I bought 2 adapters.
    4. Actually I have 2  Mini DisplayPort to VGA adapters: The one I use with my Mac Mini, and another adapter I use to connect my Mac Book Pro to a Panasonic projector.
    5. I have tried using both adapters, and the flickering problem is present using either adapter.
    6. I believe the flickering problem is definitely something that needs to be addressed and solved by Apple. The adapter is its product, and should work as advertised, no matter what version of OSX I am running. Please remember that there was no flickering before I upgraded to the latest OSX Mountain Lion.
    7. I do not believe buying an adapter from another manufacturer, as you suggest, would solve the problem.
    Thank you for your help.

  • Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

    I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
    At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
    Mini DisplayPort–to–VGA adapter implicated
    The following sequence of events causes the problem to occur:
    Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
    Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
    With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
    At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
    I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
    At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
    Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
    I used Apple System Profiler to save a list of identified devices at two points in time:
    Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
    After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
    Many devices are enumerated in the second list that are missing from the first. For example:
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
    Keyboard Hub@fe110000  <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
    AppleUSBHub  <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
    IOUSBInterface@0  <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
    Apple Keyboard@fe112000  <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
    and many child devices…
    Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
    Some devices are discovered even when the computer is in sleep mode. This is how it should work.
    The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
    Can anyone else reproduce this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • No image on screen using Mini DisplayPort to VGA Adapter

    Received mini today.  After unboxing, read through the packet.  Then began to hook everything up as directed.  I used a Mini DisplayPort to VGA Adapter to connect the monitor from our now dead desktop to the mini.  After double checking all connections, I hit the power button.  I immediately heard the apple chime. Then the monitor showed the grey apple start up screen.  Suddenly the monitor went black and said it was going into sleep mode.  I can't get it out of sleep mode when connected to the mini.  It is NOT the monitor or the adapter.  I plugged the monitor straight into a netbook and it worked.  Then, I plugged the monitor using the adapter into my MacBook Pro and also got it to work that way.  So I tried replugging the adapter into the mini.  Still can't get an image on the screen.  I can't complete set up or use mini because I can't get an image.  Any suggestions or ideas?  I will call apple in the morning if I can't figure it out tonight.  But I'm hoping someone can give me suggestions.  Thanks for your help!

    I had the same issue when I bought my mac mini last week apart from I wasn't even getting the initial grey screen. I went back to the Apple shop and they gave me another mini and fired it up in the shop using the adaptor on an old VGA monitor. It worked perfectly.
    When I got home I set it all up again and still had the same issue. I nearly threw out a couple of monitors as I thought they were broken.
    However, had a look around the web and found this suggestion:
    Shut down the mac and disconnect the adaptor from it. Now fire the mac up and let it boot up FULLY. Once it has had a chance to boot up fully, only then plug the adaptor in.
    Worked for me and I haven't had the issue since (touch wood). Hope this helps.

  • Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

    When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • Using Mini DisplayPort to VGA adapter -- any settings on the Macbook Air I need to change?

    Going into a meeting with my Macbook Air with Mini DisplayPort to VGA adapter, which will be connnected to a video projector on site. Never tried this setup before. Will this just work or do I need to adjust any video settings on my Macbook Air?

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • Getting a Mini DisplayPort to VGA Adapter & Monitor to Work with an Xserve

    First let me say that I'm very new to Xserve's and OS X Server and any help is greatly appreciated.
    I have an Xserve with a connected Mini DisplayPort to VGA Adapter and a confirmed working VGA monitor. There is also a keyboard and mouse plugged into the front USB port of the Xserve. The internal SSD has been formatted clean.
    I've been trying to boot up from the optical drive on the Xserve using the 10.6 DVD. I use the front panel/system identifier button to boot up and I make sure enclosure lock is unlocked. Each time I try to boot up, the monitor stays off and the DVD is spit out.
    I eventually got the DVD to stay in, and the screen showed the grey screen with black apple and the spinning black circle on the bottom. However, after a few minutes the screen turned orange in color. Using Screen Sharing, it looked fine. I tried a second VGA monitor, but that still didn't do it.
    So with the DVD still in, I stay connected via Screen Sharing and begin the installation process remotely, thinking Snow Leopard will recognize the monitor eventually. Well, 10.6 is now fully installed, but still no working monitor.
    I then decided to try the Mini DisplayPort to VGA Firmware Update. I download and run the installer, but it tells me, "The Updater could not find a Mini DisplayPort to VGA Adapter to update."
    How can I possibly get this monitor working?
    Thanks in advance.
    Message was edited by: nappy

    Just ran in to this myself -- Nehalem Xserve running 10.6.2 Server with an MiniDisplayPort to VGA adapter connected to an Avocent Switchview 1000 KVM. Took the server offline to install RAM and after rebooting, no video. Oddly enough, the KVM's LEDs showed a display connected but Apple System Profiler showed no adapters connected to the video card. Nothing seemingly worked -- rebooting, shutdown/restart, and/or hot-plugging the adapter made no difference. I also tried a second MiniDisplayPort adapter to no avail.
    Note that the MiniDisplayPort to VGA Firmware update had already been applied to BOTH adapters prior to this issue appearing.
    What restored video output on our system: reboot from the Snow Leopard Server install media, video reappears over the adapter, and after that I can reboot from the SSD boot drive running 10.6.2 Server with video output working over the MiniDisplayPort to VGA adapter.

  • My MacBook screen is stuck in "presentation" mode after using my "Mini DisplayPort to VGA Adapter." How can I fix this?

    My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Can the Mini DisplayPort to VGA Adapter for a 2011 Mac Mini be used with Windows 7?

    This question concerns the Mini DisplayPort to VGA Adapter described at the below link:
    http://store.apple.com/us/product/MB572Z/A
    When running Windows 7 via Boot Camp on a 2011 Mac Mini, can the above adapter be used with a VGA monitor?

    Thank you for the confirmation, Mr. Peck.

  • Mini DisplayPort to VGA Adapter NOT DISPLAYING ON EXTERNAL SCREEN

    Hello!
    Mid 2012 MacBook Pro
    Processor  2.9 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000
    Software  OS X 10.9.3 (13D65)
    I have a mid 2012 MacBook Pro, I have connected a Mini DisplayPort to VGA Adapter in order to watch movies on a HP w19e LCD display.
    Ive been using this adapter for a year now and I have never had any problems with it, until now...whenever I connect it to my mac's display turns black, and nothing happens, so I wait and the LCD display shows the unfurtunate NO SIGNAL message, so I wait a little longer and still nothing happens, I unplug the Mini DisplayPort and plug it back in, and nothing happens, and when I say nothing happens I mean nothing happens, my mac's display is black as if it was in sleep mode, I get no signal on the HP LCD and I can't get my computer's display to show image again, the only way to do it is to force restart it.
    I looked up the problem and I found a forum with a possible solution for it and did as it said.
    1) Restart the computer in Safe Mode with display attached (shut down and restart while holding down shift key).
         The display showed up without distortion.
    2) Change the display to my desired preferences (dimensions and refresh rate).
    3) Restart computer. ...and it works like a charm.
    I followed the directions and it worked... but after I restar to go back to um.. normal mode, the problem is back.
    Please I need my LCD screen how can I fix this.
    I hope I didn't confuse anyone, sorry for my english
    THANK YOU
    I leave the link for the Apple Forum
    https://discussions.apple.com/message/18816392#18816392

    I'm having the same problem. When I try to connect to the switch in our conference room (connecting both a flat panel display and/or a projector, both with much higher native resolutions), all I get is 640x480. This is a huge problem to using bootcamp, and I really need to get this to work. I was able to get a higher resolution 1280x800 on a separate, portable display, so I'm wondering if people have the problem with standalone projectors or only with projectors connected to some sort of switch, in my case an Extron MPX423A. I have also tried this in both Windows Vista (32-bit) and Windows 7 RC1 (32-bit), with the bootcamp drivers and the latest NVidia drivers, and the behavior is the same all around.

  • Mini DisplayPort to VGA adapter not waking monitor

    Hi,
    I've had my Mac mini for about a month now (the 2010 model with 2.4GHz Core 2 Duo and 2GB of RAM). Initially I had it connected to a 32" TV via HDMI which worked perfectly. However I have now switched to a 24" Iiyama ProLite E2410HDSD which doesn't have a HDMI socket. I've bought a Mini DisplayPort to VGA adapter.
    Whenever I put the mini to sleep or switch it off, the display does not come back on. To get it to work, I have to unplug the adapter from the mini and plug it back in again. Is there any way to get it to work all of the time?
    Thanks,
    Thomas
    Edit : Just booted into Windows 7 using Boot Camp, and putting that to sleep and waking it works perfectly!
    Message was edited by: thomasw234

    I think I know what's wrong, but I don't know of a good way to fix it. The Iiyama is not constructed correctly. It appears that it's DDC channel goes down when it's sleeping, which it shouldn't do, unless it allows auxiliary power on the VGA cable to keep the channel active, which it also seems like it isn't doing.
    Does the Iiyama have a DVI input? That might work better with the correct adapter. Although if they messed up the architecture of the VGA port, they may have messed up DVI, too.
    null

  • Mac Mini, Mini DisplayPort to VGA Adapter, & Boot Camp with Windows 7?

    Can a 2011 Mac Mini be connected to a VGA monitor using the Mini DisplayPort to VGA Adapter while running Windows 7 by means of Boot Camp?  The Mini DisplayPort to VGA Adapter is described at the below URL:
    http://store.apple.com/us/product/MB572Z/A

    Sorry, I do not run Windows on my Mac's so I can not say for sure.
    You should also ask over in the > Windows Software section of Apple Support Comunities.

  • Mini DisplayPort to VGA adapter not working under Vista (Boot Camp).

    Hi there,
    I'm facing a very serious issue with MacBook Pro Unibody running MS Vista under Boot Camp: using the Mini DisplayPort to VGA adapter to hook a projector is 95% impossible because the only resolution available is 640x480 or sometimes 800x600. No solution came from the adaptor firmware update, still same behavior: connecting the external projector/monitor toggles 640x480 resolution with no more choices available. Just 5% of attempts on selected projectors gave me access to the complete resolutions list.
    This is having a serious impact on my job where I do need both Mac&Windows running natively and with external display capabilities, please I'm looking for some feedback from users facing the same problem or someone who had an official answer on this issue from Apple. Do avoid posting about using modded display drivers please: I know they exist but the adaptor should be working with original ones.
    I can understand Apple does not support MS Vista issues but this seems to be a hardware/driver one.
    I'd like to point out I'm using a clean Vista installation with Apple drivers (from the Leopard DVD) and I've run Vista (same version, same gfx drivers etc) under Boot Camp on my previous MPB (with integrated DVI output+adapter) on hundreds of different projectors with never a single problem.
    Any feedback is really appreciated.
    L.

    I'm having the same problem. When I try to connect to the switch in our conference room (connecting both a flat panel display and/or a projector, both with much higher native resolutions), all I get is 640x480. This is a huge problem to using bootcamp, and I really need to get this to work. I was able to get a higher resolution 1280x800 on a separate, portable display, so I'm wondering if people have the problem with standalone projectors or only with projectors connected to some sort of switch, in my case an Extron MPX423A. I have also tried this in both Windows Vista (32-bit) and Windows 7 RC1 (32-bit), with the bootcamp drivers and the latest NVidia drivers, and the behavior is the same all around.

  • Mini DisplayPort to VGA Adapter won't work on thunderbolt port

    Hello
    I bought 2 new Macbook Pro 13' , 2.9 Ghz Intel Core i7, with 8 Go 1600Mhz DDR3,  Intel HD Graphics 4000 512 MB, Mac OS X Lion 10.7.4 (11E2617).
    I have connected a Mini DisplayPort to VGA Adapter in order to show presentations on different LCD projectors but  no image appear.
    The external monitor is detected but no image is shown. I have tried to change the frequencies: parts of the screen appears but no a correct image. I have the same symptoms with the 2 Macbook Pro. Using old Macbook Pro with the same Mini DisplayPort to VGA Adapter, the slides are showns normally.
    I make a test with a Mini DisplayPort to DVI Adapter and with a Mini DisplayPort to HDMI Adapter and everythings works correctly with both adapters.
    Does anybody has a solution?
    Thank in advance for your help
    Philippe

    By any chance were you using a VGA->DVI adapter when trying to use the Mini-DisplayPort->VGA adapter? As in Mini-DisplayPort->VGA->DVI?
    I had trouble with this. I found going straight to Mini-DisplayPort->VGA or Mini-DisplayPort->DVI worked perfectly but once I added a VGA->DVI or DVI->VGA adapter to the chain the screen would be detected by OS X but the monitor itself would give the "No signal detected" message. I tried all these combinations on the same monitor.
    Not sure if it helps your situation but I have noticed some similar issues.
    EDIT: Oh, and I have the new MacBook Pro 15inch with Retina all fully updated. I noticed that with my late-2009 White Macbook didn't have this issue with the cables and adapters.

  • Mini DisplayPort to VGA Adapter-is it reliable?

    I have to give a Keynote presentation with my 13" 2009 mid year Macbook Pro, and planned on using an Apple mini displayport to VGA adapter, to connect to the projector. The reveiws I've read about this adapter are pretty dismal. Apparently, they burn out very quickly or just plain fail to work! How risky is this? What are my options?
    Thanks in advance for any advice!

    my thunderbolt to HDMI set up has failed a few times. Adapters are gonna fail. I've had great luck with a company called "moshi"  They've had great support as well. Hope this helps, cheers!

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

Maybe you are looking for