Mini DVI to S-video and composite giving complete distorted output!!

I tried to hook up my 20" Sony Trinitron either through S-video or composite to the powerbook without any success. I got completely distorted picutre. I have tried all the video resolution setting that is available on the Displays reference window with the same result. Does anybody out there run into this problem at all.

I have a 12" PowerBook 1.5ghz and had the same problem with garbled video today. When I plugged in the Mini-DVI > Composite/S-Video adapter the PowerBook would consistently think it was attached to an ordinary VGA monitor, and could not sync with the television. This caused a B&W, warped, split in half picture.
I took the adapter back to the Apple store, plugged it into one of their demo units, and saw it behaved the same way. They gave me a replacement and everything has been fine since.
QS2002, 1.4ghz, 1gb, GeForce 4 Ti4600, SATA; 12" PB 1.5ghz, 512mb   Mac OS X (10.4.4)  

Similar Messages

  • Video-out adapter (to S-video and composite) giving distorted output.

    Recently, we had an anime-fest in my dorm, and we used my laptop (12 inch powerbook G4) with my TV-out adaptor, specifically from Apple (I didn't want to chain two adapters together). While it worked, after fighting with it for a while (the second display properties DESPERATELY need a time-out feature to restore previous settings), finally got it to work.
    At which point I noticed that, while playing, the entire video would... shimmer, for lack of a better word. Watching the edge, it would distort slightly, constantly, related to what was being displayed at the time. To me, this seems to say that the analog-out processing is rather crappy, but I'm hoping there's either a way around that, or I got a bad adapter. Is there any hope?
    This is all related to the composite output, I have no way to check the S-video out. However. I brought my desktop PC down the next time, and used its video-out (x800 pro. I love it), which worked flawlessly, so I know that it isn't the TV's input or the video file.

    *another bump*
    Come on, anything? The distortion seems to be predictable, based on what's being displayed. In that case, this could be accounted for prior to anything even being sent to the display, and nullified. I don't suppose anyone has tried?
    I know other TV-display adapters have similar issues, but this is larger than most. Something contradictory to Apple's trend.

  • Mini dvi to HDMI video and sound lag

    I have a brand new 13" macbook pro hooked up to a 40" Philips LCD TV and I'm getting a lot of lag just even moving the mouse. About half a second. Any ideas?

    I'm getting the same issue connecting early 2010 MBP 13in through a moshi mini display to hdmi to my 40in samsung. Pictures is great, but the communication between computer and television is about 1 second behind. If anyone figures this out please share.

  • Does DVI to Video adapter send both s-video and composite simoutanesly?

    Hi,
    I´m wondering if you connect the DVI to Video adapter on the new MacMini (DVI to s-video+composite), does the Mini send BOTH s-video and composite at the same time?
    If connected to TV and projector, I want to see both simotanesly, not neede to change something in the setup...
    The both having same resolution I guess is a must!
    Regards,
    Pat

    Yes, many think, but i´ve havnt heard anyone whoose sure?! Can´t be such a odd thing, connect a Mini to two displays at same same time...

  • Mini-DVI to S-video adapter and no colour on TV screen

    I just purchased a mini-DVI to S-video adapter for my MacBook. I want to connect it to my TV through my DVD/Video player.
    I do get a nice picture on the TV and I can manage it in the screen settings panel, BUT the TV-screen doesn't show any colour, just black and white. Why?
    I've tried several settings in the Preferences panel, but no luck. What to do?

    The cable is brand new and I've checked it with a mulitmeter. It's OK.
    I've also heard that this is a fairly common problem with S-video and I got a tip to try the composite video instead. It worked beautifully, so now I've got nice and crisp video in full colour on my TV!

  • I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

    When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

    I am using MAC OSx 10.5.8 (9L31a) as my operation system.  The TV says "No signal.  Check connected device's power, cable connection and source selection."  Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display.  But how do I do that?

  • Mini Dvi to S-video/Composite/RCA

    I have a 2007 black macbook and recently bought a Mini-DVI to video adapter (brand-dynex) and hooked it up to my older television (TV has no hdmi hookup or dvi, just S-Video and RCA) and I could faintly make out my computer screen but it was all "scratchy" and was moving across the screen. I changed the resolution and it became black and gray lines moving up and down the screen. I was wondering how can I hook my computer up to this older TV to watch movies online (I wont be upset with low quality). Do I need to purchase the Apple brand adapter or is there some "tweeking" I can do to make the Dynex one work? thanks

    Honestly, I was afraid of this... Oh well, I bought it off ebay and got my money refunded so no harm done. Thanks for the help and if anyone can figure some application or anything and get their adaptor to work, please contact me thanks....

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • Mini DVI to S-video display problem

    I connect my macbook to a plasma TV using mini DVI to S-video adapter so I can give keynote presentations. All of a sudden, having not changed any settings, the plasma display went to black & white while my macbook's display remains in color. I have checked with two different s-video cables and with another TV, as well as trying to change the color display in my system preferences, but after several hours have given up. Anyone else have this problem or have any thoughts on how to alleviate it? Thanks
    Hungus

    A wire may have broken inside the mini DVI to S-video adapter. S-video uses one wire for the brightness, and one for the color information. If the color wire breaks you will get a black and white picture. Until Apple replaces the adapter, you could use the composite video output, but the picture will not be as sharp.

  • Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Check the projector and see what kind of input is has, most have a VGA connector, so you would need a male to male VGA. You will also need the Mac mini dvi to male VGA (of course).
    Some of the older projetors have a component in only, which is the red,yellow,green, RCA connectors, which are avaialable. (Usually the are fairy short, 5 ft or so,  so you would need to get a VGA with yhe mini DVI to VGA, and a component (the one with the 3 RCA's) you will probaly have to get a Female to Female VGA adapter to connect te VGA to the component.
    And finaally if that weren't enough, the really old projectors have only a composite input. All I can say about that is "the hunt is on"
    Best of luck

  • S-Video and Composite Adapter Output Flickers, is B&W, etc.

    Okay, here are the details:
    - Bought a new *Mac Pro (2009)* Quad 2.66
    - Customized with an *ATI Radeon HD 4870* card
    - Current OS version: 10.5.7
    - Attempting to use *Apple's DVI-Video adapter* (works fine with my G5)
    - Poor, flickering, black & white, duplicate, partial signal appears on TV using either composite (RCA - yellow) or S-Video
    - There is *no literature anywhere* that states whether this adapter is supported (or not)
    - ATI cards have traditionally (before the 4870, not sure about the previous Mac Pro model's ATI cards) been able to correctly output analog video signals using this adapter
    - Apple's phone support personnel say *it should work*
    - Tried a *newer adapter at a service provider with no difference* in the results
    Any help, advice, etc. is appreciated.
    PS - If I can't find a solution that doesn't involve buying anything extra, I'm considering getting the DVI-VGA adapter with a VGA converter box (VGA in, S-Video and Composite out) which seems to be the only viable alternative (as getting a new card won't help when/if I get a Mac Mini for movie watching).

    Hi Com,
    I don't have an answer for you but maybe in the comments about it someone has said something helpful: http://store.apple.com/us/product/M9267G/A
    I think that Apple would like to say all it's adapters work fine but I don't think that's really the case. The VGA to Mini Display adapter I just bought was only able to coax a very limited amount of resolutions from my CRT. Other people are finding other adapters not being up to snuff and buying this one as a cure. http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA3Ng&mco=MjE0ODQ2Nw
    But even this has it's problems.
    I hope someone else writes in to help. I hope there's a work around for you. It's just hard to know what is Apples responsibility to do and yours. Yours I don't believe should be an issue if the adapter worked right.

  • How to get plain old S-video and Composite out from a MBP?

    Hi,
    this question is about someone's MacBook Pro he newly bought with adapters to get both DVI and Svideo/Composite Out.
    He got Mini DisplayPort to DVI-D converter, and a DVI-I to video converter, that cannot be plugged into a DVI-D port. Apple removed the analog capability of its adapter, that's bad. But what's badder is there doesn't seem to have any Mini DisplayPort to Svideo/Composite adapter, as there was with previous generation machines.
    How can someone easily output analog video from MBP?

    In fact, I recognize that these standards are old, which doesn't mean they're not up-to-date. Similar example, VGA connector is old, but perfectly useful, even in 2009. I recently plugged a 22" LCD with VGA and DVI on the same computer (a bland desktop PC), and there was strictly no difference. Same color depth, same crisp display. Even looking at a corner with a magnifier, nothing was different.
    So, changing standards just for the sake of it doesn't make any sense.
    Agreed that, as a pro, Apple would like me to buy their pro line, but nowhere in the pro line does an easy solution exists for S-Video and composite out. The solution you posted exists, but is unwieldly and not neat at all, if it doesn't break the Mac's connector under its weight. If a manufacturer can do this kind of adapter, Apple can do it better, and make a bigger profit out of it.
    For the adapter you posted, I don't ever buy anything that is not at least Mac+Windows compatible, or at a minimum is open-source, so anyone with programming skills can make something. The manufacturer also doesn't give a clue on how this works. I guess some sort of virtual driver sits in the system as a virtual IEEE1394 port so any program requiring FW can work transparently. Still, incompatible with the OS that most manufacturer ship their new PCs with, poor commercial decision, wether you like the OS or not.
    Adding FW in the MB unibody design wouldn't have cost anout $30. Rather, we're talking about a 25 cents chip, a 25 cents connector, which they would have rounded up to $20 and still, that was present in previous-gen MB. After all, they are indeed selling a matte screen on the MBP 17" for $50 more, despite them removing a single piece of glass which may cost, well, let's be fair, $5 to manufacture? That's dishonest. And capitalistically justified.
    So far, choosing a Mac for one's needs is no easy task: older white MacBooks have the same power as unibodies, excellent connectivity, top notch transfer speeds, BUT are heavier, as not as ecologically friendly nor do they have future-proof RAM standard. The unibodies are sleekier, easily recycled and will be able to be upgraded in the near future BUT is most likely unable to use current devices and have slower transfer speeds.
    For Pro models, the newer ones have great efficiency, much power and flexibility with their dual GPU BUT lost the option of matte screen, although their other pro-oriented monitors still default to matte. Only the 17" has the option. If a pro already finds his 15,4" bulky and with ample reserve power, will he buy the bigger and heavier 17"? Probably not.
    I understand that Apple way of doing business is keeping only what's essential with no unnecessary options (I'm looking at you, Asus, with you at least 10 different versions of you netbook). But this time, not everyone can find what he or she wants in Apple's line of laptops, as opposed to the iPod thing, where virtually any possible preference is covered.

  • Mini dvi to Component Video adapter !

    Help !
    Where Can I Find "mini dvi to Component Video adapter" ?
    Help !

    "there is no such thing in apple store"
    I MAID,
    Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA.

  • Mini-DVI to S-Video Adapter doesn't work

    Hi, I am using the Mini-DVI to S-Video adapter from apple to connect my macbook to the TV. But the only thing I get is a grey flickering picture on my TV. When I click on the monitor-button I can see that my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display. I tried all different resolutions, but needless to say it doesn't work.
    Can the adapter be broken, or is there a problem with the macbook?
    Macbook white 2 GHz Intel Core Duo 1GB RAM   Mac OS X (10.4.8)  

    my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display
    If you connect the Mini-DVI to S-Video adapter, the monitor button on the menubar should show resolutions for Color LCD in one section and NTSC/PAL in the other.
    A grey flickering picture is indicative of picking the wrong standard-PAL vs. NTSC.

  • Problems with Mini DVI to S-Video/RCA adapter

    Hello
    I've got a mac mini and I want to pass its image to a television (note: this television doesn't have HDMI)
    I've bought the Mini DVI to S-Video/RCA adapter, but when I connect it to my TV nothing appers (except some gray lines, which means the signal is reaching the TV, but no image)
    Thanks

    That connector may not be compatible with an Intel Core 2 Duo Mac Mini like yours.
    http://store.apple.com/us/product/M9319G/A?fnode=MTY1NDA3Ng&mco=MTA4NDU1MTE
    The Apple Mini-DVI to Video adapter is designed for use with the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4.

Maybe you are looking for