Mini mac will not register my digital camera. It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.
It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.
Have you downloaded everything that is on the camera? If so format the SD card on the camera (will erase everything on the card).
If you have not downloaded everything can you see stuff on the camera? If you have a card reader you could try putting the SD card in that and trying on the mini. If your mini has a SD card slot you could try that.
In any case format the card on the camera before taking more pics.
Next time be sure to eject the camera from the Mac properly and turn the camera off before disconnecting.
EDIT: You might also check the camera's USB Mode is set to PC.
Similar Messages
-
My iMessage will not register that I have a phone number attached to the account on my mac. It only shows the email addresses. My iPhone and iPad work perfectly.
Hi Aurion23,
If you intend to keep using iCloud on your iPad, your best course of action would be to update your Apple ID/iCloud information so that you have a known password and it is associated with an active email address. You may find the following articles helpful:
iCloud: Change your iCloud password
http://support.apple.com/kb/ph2617
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Regards,
- Brenden -
Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.
Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty; -
I'm on a mac, version 10.5.8, and firefox will not download. It has a prohibit sign over it, and says 'cannot be supported with this architecture'
Firefox 4 versions and later do not run on a PowerPC Mac.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 7 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
I rented Enders Game on my ipad and it stopped at 25:06. And I cannot get it to play past that point. What do I do?
Hello there, TheOrmos.
The following Knowledge Base article refers to how to report your issue to iTunes Store Support:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages
Try here:
iPod touch: Hardware troubleshooting
Also try placing the iPod in recovery mode and then try to restore via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
IPhoto 5.0.4 not launching when digital camera is connected
Normally my iphoto opens automatically when I plug in my camera. But today it decided not to work- I've tried unplugging and replugging but to no avail. I'd appreciate all the help I can get. My camera model is Sony DSC-T1 (silver).
I also had some issues with my Cinema Display- for some reason the screen is blank when I turn on the computer- it's only when I unplug the power supply and replug it than it wakes up. I'm not sure if this has anything to do with the power supply.
Thanks
Power Mac G5 Dual Processor 2.3 Ghz Mac OS X (10.4.7)
Power Mac G5 Mac OS X (10.4.7)Hi there,
Just out of curiousity are you still able to download your images?
I do not have my iPhoto set up to automatically open when a camera is connected to my machine, but if I do open iPhoto, it does connect with camera and I am able to down load images.
PhillyPhan gave great advice and if you tried all 3, I'm stumped but if you can still download photos, then it's some kind of preference that needs to be adjusted... please let us know...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620 -
I keep getting a message that I am disconnecting my digital camera incorrectly. Before I got my iMac I didn't have this problem, but now I can't find the FILE, EJECT buttons. My computer consultant says to go to UNTITLED FOLDER under ALBUMS and click on the circular icon to the right of it. Right now
the untitled folder is there, but not the circlular icon. No matter how I try to do this, I get a warning that I have done it improperly and that I may have caused damage. I don't want to damage my camera or my iMac. How can I disconnect properly?When you connect your camera, what settings do you use for importing the pictures? I have mine set to simply show on the desktop, so I get an icon "Canon" on my desktop. When I'm done, I drag that icon to the trash and that is how you properly eject it. So we need to figure out where that icon is. Go to your settings in iPhoto and check those as well as in CDs and DVDs in System Preferences and also in Finder Preferences. Post what you see in those locations.
-
My Ipad is stuck on the connect to iTunes screen, I have tried plugging into iTunes but it makes the necessary noise but the computer does not recognise it and nothing alters on the Ipad screen. Have tried various computers and leads and it still does not work. Have also tried the switching off, plugging in to computer and turning on again using the on button and then the home button but nothing works. This happened while I was downloading software update. Please help me.
I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you. -
A problem has occurred on my laptop and my user profile won't load. I am currently using another admin account, but was wondering if there was a way that I could access the bookmarks that I had saved on my original account? Thanks
See:
* [[Recovering important data from an old profile]]
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
My iphoto works on emails. But when I try to put it on Facebook and use my account and password, it says "unknown error". I have updated and restarted, but nothing changes. What is wrong?
I've seen a few other posts on this problem but I've seen no answers. In my case sharing to Facebook works just fine.
I'm wondering if there might be a problem with the permissions in facebook. In order for an app to post to Facebook the user must sign in to Facebook and give that ap permission. You might check your Facebook account to see if iPhoto for iOS has permission or might be blocked. -
Can digital camera movies (MPEGs) be downloaded to and played on Apple TV?
Can digital camera movies (MPEGs) be downloaded to and played on Apple TV? I know that it can play downloaded "real" movies, but what about movies made on digital cameras
Some cameras will record in mpeg4, however they may have unsupported audio formats or otherwise not fit the specifications required for the tv. In essence some cameras may produce video that will play directly on the tv.
If your files are mpeg4 and won't play, itunes will most likely convert them to the correct format (advanced/convert for Apple TV), if they are mpeg1, mpegstreamclip will convert them for you. If your files are mpeg2, mpegstreamclip will still do the job but you will need to install the Quicktime mpeg2 playback component ($20) -
My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?
Do you have another charger to test with?
It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you. -
Acrobat will not start-up and mac osx and will not register
Acrobat is installed on my Mac Mini, but will not allow me to register with Adobe. Also, the same Acrobat 8 pro will not operate on my MacBook pro because it is not registered and does not recognize my serial# etc. How can I call someone at Adobe? This product is worthless to me, and I have tried everything.
Hold down the option key while starting your iMac
You should see a screen with some imagines of hard drives appear.
Press the eject key to eject the disk, then select your boot partition (likely named "Macintosh HD") and hit the return key.
If you still hear the three beeps, the computer may be unable to access its system memory. Preform the resets detailed in these articles:
https://support.apple.com/kb/HT3964
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Or try as den.thed suggested if you have recently installed memory into your computer.
If your boot partition does not appear when you hold down option and "Recovery HD" also doesn't appear, or if it does not allow you to eject the disk, you may be experiencing hardware issues. Try the above resets, and if they don't work, you will need to go to your closest AASP or Apple Retail store for service.
Good luck. -
my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in
If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.
Maybe you are looking for
-
Mail for Exchange : HTTP Server Error 500
Just installed MFE on my Nokia E90 and having issues synching it up with my exchange account. I checked the log and this is what it says : 19/12/2008 9:23:03 Setting OFFLINE Status to False 19/12/2008 9:23:03 Setting ROAMING status to False 19/12/200
-
I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress
I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress whatsoever. When I export with lightroom 4 trial, no problem. Social media marketing is an important part of my business as a photographer, so it is very important for me to make th
-
Why dont my dimension levels show up instead i get "Standard" level??
Hi i am facing a very tiresome problem and i cant figure it out,you see i have crated two levels in my dimesnsion Level: School Number (BuisnessIdentifier) level: Office OfficeNo (BI) but in the query builder of charts i only see 'STANDARD' and non o
-
Hp Pavilion G6 "Launch Startup Repair" problem
I have had my Hp Pavilion G6 series laptop for a year or so, and a couple days ago it froze while I using it. I turned it off, and when I got back on a black screen came up titled "Windows Error Recovery". It had two options -Launch Startup Repair
-
I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.