Minimized & Close buttons don't work !!!

hallooooo
when i click on the button of minimized while another form is runing ,,, it don't work !!
and return to the normal mode !!!!
note ,, i make the minimized allowed (yes).....
& the close button don't work too !!
what can i make to make them works by wizerd or programaticly !!
my thanx
Shenouda Bertel

hallo yogesh !!
First of all i wanna thank you for your care
with my problem ..
& that you give me ur time . thinking & writing to me !!
i'm soo thanxs !!
now ...
about my first problem ..is that ..
in the main menu there is buttons ..
every one link to a form , by Open_form ...
And it works well ...
but when i navegate the new open form ..
and when i wanna to minimize it ....
its not minimized but get it normal !!
... that's make the user angry !! ..
i will be waiting for your solve !!
yours
Shenouda Bertel

Similar Messages

The minimize, maximize and close buttons don't work, and I can't select any items in drop-down menus.

Running Firefox 23.01 on Windows, and two days ago I lost the ability to maximize, minimize or close windows via the buttons in the upper righthand corner. I also am unable to select a choice in dropdown menus, and for good measure I cannot x out of the About window that popped up went I wanted to check my version number!
I've looked in the support forum and seen that this is not an uncommon problem. However, I have tried every suggested solution I could find - reset Firefox several times, turned off hardware acceleration, opened in safe mode and finally uninstalled and reinstalled the program (deleting the old program folders before reinstalling as recommended - and nothing has worked.
Any help would be greatly appreciated.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

:*( Form buttons don't work for all testers

I created a form in Acrobat 9.1 using Forms> Add or Edit Fields. The form contains action buttons for next page and previous page, to clear all fields, and (with the generous help of a fellow forum member) to print the form and save it to disk. I optimized the form with compatibility set to Acrobat 8.0 and later, then enabled it for Reader. I sent this form to several users for testing.
Those using Acrobat have no problems with it.
Those using Foxit Reader have no problems with the action buttons or the form fields (except that date fields are finicky; Foxit doesn't convert the dates to the correct format the way Reader or Acrobat do). But, the yellow background that I created as a watermark -- so I could make it visible but not print -- is printing. That's not anything that Acrobat can help, but it is a very good reason to not recommend using Foxit. It would create a dreadful shortage of yellow inkjet ink.
Those using Reader 8.0 to 8.1.2 are having several problems. For them, the action buttons don't work... except the "clear all fields" one. The buttons don't do anything; there are no errors, no messages, no activity of any kind except to change color when clicked.
The buttons that don't work are all set up as Mouse Up actions executing a menu item... for example, "Go to page 2" is just View>Go To>Next Page. The "Clear all fields" button is, on Mouse Up, "Reset a form" with all fields selected... so it's the only kind of button that works for Reader users, and it's the only button that doesn't execute a menu item.
Why is there a difference in actions these users can run? If it's a security issue... what possible risk is there in going to the next page, using a button instead of a scroll bar or Page Down key??? I can find no common sense here, especially because Reader users are the only ones barred from these form actions. Everyone else can use them.
-- Also, these testers (Reader 8+) are having problems with the tab order. Some of the radio button groups (which have no more than three options, Yes, No and NA) at first appear to be tabbing correctly, because the Yes option receives focus in the correct order... but randomly, tabbing through several fields, suddenly the No option will get focus... in a radio button group nowhere near the current tab location. Tabbing is rendered useless, then, because these anomalies are unpredictable and it doesn't appear there's anything I can do to prevent this from happening.
It's pointless to delete and re-add the afflicted radio buttons. That has no effect... and the radio button groups are already in the correct order anyway. I don't know how this could possibly happen... But it doesn't happen for the Foxit or Acrobat testers.
• Why would Reader be the only app that can't use the buttons and can't tab through the fields correctly? I'd think Adobe's own software would work best with their own file format. •
Is Reader 8 the problem --- should those users all update to the newest version? I don't have any Reader 9+ testers yet. Nobody seems interested in it. The testers all assume the problems are MY fault, so nobody's happy with me and no one wants to bother testing the forms because there's always something wrong.
<hair-pulling> I seriously regret upgrading to Acrobat 9.1. I know other forum members who agree this thing is catastrophically buggy -- I've wasted weeks trying to iron out all the problems I've been having with these forms, forms that should have been quick and simple to create, and in past versions of Acrobat, would have been. Yet I'm still tearing out my hair over tab order! Worse, I fear I'm close to losing my job for all the time wasted and all the projects I've fallen behind in because of this. <no /hair-pulling in sight>

I have no clue, but it might make a difference depending on the form being produced in Acrobat versus Designer. Acrobat will take you both places and one of them may have an issue with backward compatibility. I have not heard of that, but it is a possibility.

"Archive" and "View" buttons don't work after folio update

Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.

To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

Something else you can try.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Flash buttons don't work

I created my template in Dreamweaver and 9 other pages from
the template. Now I inserted flash buttons in the original template
and linked them to all other pages. Buttons work in the original
template but not in any of other pages, even though I updated the
pages with all the changes. What am I doing wrong??? I am losing my
mind here.
Any help appreciated.
Thanks!

Flash buttons don't work in any real sense of the word,
anyhow. Why are you
using them?
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
This problem is due to the fact that you are placing the
buttons into a
Template file. In this case, and assuming you want to inherit
all the
problems, make the links to the buttons ROOT RELATIVE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"zxh5079" <[email protected]> wrote in
message
news:ga1gp6$qos$[email protected]..
>I created my template in Dreamweaver and 9 other pages
from the template.
>Now I
> inserted flash buttons in the original template and
linked them to all
> other
> pages. Buttons work in the original template but not in
any of other
> pages,
> even though I updated the pages with all the changes.
What am I doing
> wrong???
> I am losing my mind here.
> Any help appreciated.
>
> Thanks!
>

IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.

Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Click wheel and buttons don't work on 5th gen.

I have had my iPod for about half a year and for some reason my iPod buttons don't work. If I move the hold button it turns on but none of the other buttons work. It charges and everything. Does anyone know what to do?
5th generation Windows XP

There isn't any problem with your ipod, theres just a different way of going about when you put video games on your ipod. First, plug in your ipod. when your ipod icon appears on the left side where it usually does, click on it. Look at the top on the ipod screen that appears. The screen should give u info about your ipod. At the top look for an icon that says games. Pictures and a few other things are there but click on games. Once that screen appears click on the check mark that say sync games. After that it is pretty self explanatory. GoodLuck

My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

Forward and back buttons don't work in Firefox but do everywhere else.

Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

Portege M750 and Win8.1 Pro -tablet buttons don't work

Hi
I'm having difficulties installing the tablet buttons in WINDOWS 8.1 Pro. Everything else works, perfectly.
In Windows 8 Pro this buttons worked nicely, but now, after a clean install of Windows 8.1 Pro two of the buttons don't work. The buttons are the Toshiba assist button and the presebtation button. I've tried to configure them in Toshiba assist software but nothing happens.
I'm sure I've installed all drivers that made wverything work with Windows 8. As anyone tryed this and add success?

> I'm sure I've installed all drivers that made wverything work with Windows 8
Windows 8.1 is not Windows 8 and many of Toshiba Win 8 drivers and tools dont work or are not fully compatible with Win 8.1
As far as I know the Toshiba does not support Win 8.1 on this Portege M750.
This means that no Win 8.1 drivers will be released and in such case some notebook features like the control buttons could not work properly.
Fact is that using Windows Vista or Win 7, such buttons were controlled by Value Added Package. This package does not exist for Win 8.1 and has been replaced by other software called Toshiba System Driver
So in case you want to try to get the buttons to work, I recommend checking this with Toshiba System Driver

Clean Install of Windows 8 & Some buttons Don't Work

I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows: 4.00GB (2.97GB usable)(32bit OS, x64 Processor). Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
Serial Number: 3CR9240GJN
Product Number: NC701AA

Buttons don't work

I am working on a small application.
My main frame is a public class that defines two buttons in its constructor one for input and the other for feedback.
The input screen and the feedback screens are defined as inner listener classes of the main class.
The code compiles fine but the buttons don't work.Please take a look at my code and make suggestions for what I am doing wrong
Thanks
import java.awt.*;
import java.awt.event.*;
public class project1 extends Frame {
static Object source;
static Button input, feedback, apply;
public project1(){
super("Project Development Coordination System");
setSize(500,500);
setLayout(new BorderLayout());
//Build and add 1st Panel of project1
Panel p1 = new Panel(new BorderLayout());
TextField Title = new TextField();
Title.setFont(new Font("Sansserif", Font.BOLD, 48));
Title.setText("HORNSONIC");
Title.setEditable(false);
TextField Name = new TextField();
Name.setFont(new Font("Sansserif", Font.BOLD, 30));
Name.setText("Hera International, Inc.");
Name.setEditable(false);
p1.add(Title, BorderLayout.NORTH);
p1.add(Name, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add 2nd Panel
Panel PDCS = new Panel();
TextField pdcs = new TextField();
pdcs.setFont(new Font("Sanserif", Font.BOLD, 22));
pdcs.setText("Project Development Coordination System");
pdcs.setEditable(false);
PDCS.add(pdcs);
add(PDCS, BorderLayout.CENTER);
//Build and add 3rd Panel
Panel buttons = new Panel();
Button input = new Button("INPUT");
buttons.add(input);
Button feedback = new Button("FEEDBACK");
buttons.add(feedback);
input.addActionListener( new Input());
feedback.addActionListener(new Feedback());
add(buttons, BorderLayout.SOUTH);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
//end of project1()
//Input class
static class Input extends Frame implements ActionListener {
          Input(){
super("Input");
setSize(500,500);
//Build and add FirstPanel of the Frame
Panel FP = new Panel(new BorderLayout());
//Build and add northpanel of FP
Panel np = new Panel(new BorderLayout());
//Build and add subpanel1 of np
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
//Build and add subpanel2 of np
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
np.add(subpanel1, BorderLayout.NORTH);
np.add(subpanel2, BorderLayout.CENTER);
FP.add(np, BorderLayout.NORTH);
//Build and add centerpanel of FP
Panel cp = new Panel(new BorderLayout());
//Build and add subcenter1 of centerpanel
Panel subcenter1 = new Panel(new BorderLayout());
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
cp.add(subcenter1, BorderLayout.NORTH);
//Build subcenter panel of cp
Panel subcenter = new Panel(new GridLayout(1,3));
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
cp.add(subcenter, BorderLayout.CENTER);
FP.add(cp, BorderLayout.CENTER);
//Build and add southpanel of FP
Panel sp = new Panel();
TextArea comments = new TextArea("Comments:", 3,30);
sp.add(comments);
FP.add(sp, BorderLayout.SOUTH);
add(FP, BorderLayout.NORTH);
//Build and add SouthPanel of Frame
Panel SP = new Panel();
List l1 = new List(8,true);
l1.addItem("Quote Requested:");
l1.addItem("Quote to be completed by:");
l1.addItem("Sample Requested:");
l1.addItem("STd sent to Factory:");
l1.addItem("Factory estimated ETD:");
l1.addItem("Revised ETD#1:");
l1.addItem("Revised ETD#2:");
l1.addItem("Revised ETD#3:");
SP.add(l1);
TextArea dates1 = new TextArea(8,8);
dates1.setBackground(Color.gray);
dates1.setForeground(Color.black);
dates1.setEditable(true);
SP.add(dates1);
List l2 = new List(8, true);
l2.addItem("Days Quote overdue:");
l2.addItem("Date Quote Received:");
l2.addItem("Actual ETD:");
l2.addItem("Sample Arrival Date:");
l2.addItem("Days Sample overdue:");
l2.addItem("Days in Development:");
l2.addItem("Date sent to customer:");
l2.addItem("Actual Days to customer:");
SP.add(l2);
TextArea dates2 = new TextArea(8,8);
dates2.setBackground(Color.gray);
dates2.setForeground(Color.black);
dates2.setEditable(true);
SP.add(dates2);
add(SP, BorderLayout.SOUTH);
//Build and add CenterPanel of Frame
Panel TD = new Panel();
TextField td = new TextField("TIME IN DEVELOPMENT");
TD.add(td);
add(TD, BorderLayout.CENTER);
          addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}// end of input()
public void actionPerformed(ActionEvent Event)
Object source = Event.getSource();
if (source == input){
               new Input();
               setVisible(true);
}//end of input if
          }//end of actionPerformed.
     }//end of class input
//Feedback class
static class Feedback extends Frame implements ActionListener{
Feedback(){
super("Feedback");
setSize(500,500);
//Build and add panel 1.
Panel p1 = new Panel(new BorderLayout());;
//Build and subpanel off panel 1
Panel subpanel1= new Panel();
Label L1 = new Label("Sample#");
TextField T1 = new TextField(10);
T1.setEditable(true);
Label L12 = new Label("Customer:");
TextField ctf = new TextField(10);
ctf.setBackground(Color.gray);
ctf.setForeground(Color.black);
ctf.setEditable(true);
subpanel1.add(L1);
subpanel1.add(T1);
subpanel1.add(L12);
subpanel1.add(ctf);
Panel subpanel2 = new Panel();
TextField sub1t = new TextField(10);
sub1t.setBackground(Color.gray);
sub1t.setForeground(Color.black);
sub1t.setEditable(true);
subpanel2.add(sub1t);
Label sublabel = new Label("Model#");
subpanel2.add(sublabel);
TextField sub2t = new TextField(10);
sub2t.setBackground(Color.gray);
sub2t.setForeground(Color.black);
sub2t.setEditable(true);
subpanel2.add(sub2t);
p1.add(subpanel1, BorderLayout.NORTH);
p1.add(subpanel2, BorderLayout.CENTER);
add(p1, BorderLayout.NORTH);
//Build and add Panel 2
Panel p2 = new Panel(new BorderLayout());
//Build and add subcenter1 of Panel 2.
Panel subcenter1 = new Panel(new BorderLayout());
//Build subpanels of subcenter 1.
Panel NP = new Panel();
Label Project = new Label("Project Scope");
NP.add(Project);
TextField PS = new TextField(10);
PS.setBackground(Color.gray);
PS.setForeground(Color.black);
PS.setEditable(true);
NP.add(PS);
Label Appl = new Label("Application:");
NP.add(Appl);
TextField Price1 = new TextField(10);
Price1.setBackground(Color.gray);
Price1.setForeground(Color.black);
Price1.setEditable(true);
NP.add(Price1);
subcenter1.add(NP, BorderLayout.NORTH);
Panel CP = new Panel();
Label TP = new Label("Target Price-");
CP.add(TP);
TextField appl = new TextField(10);
appl.setBackground(Color.gray);
appl.setForeground(Color.black);
appl.setEditable(true);
CP.add(appl);
Label quote = new Label("Quoted Price-");
CP.add(quote);
TextField Q = new TextField(10);
Q.setBackground(Color.gray);
Q.setForeground(Color.black);
Q.setEditable(true);
CP.add(Q);
subcenter1.add(CP, BorderLayout.CENTER);
p2.add(subcenter1, BorderLayout.NORTH);
//BUILD and add subcenter to Panel 2);
Panel subcenter = new Panel();
List list = new List (3,true);
list.addItem("Woofer:");
list.addItem("Mid:");
list.addItem("Tweeter");
subcenter.add(list);
TextArea inches = new TextArea(3,5);
inches.setBackground(Color.gray);
inches.setForeground(Color.black);
inches.setEditable(true);
subcenter.add(inches);
List list1 = new List(3, true);
list1.addItem("Count-");
list1.addItem("Count-");
list1.addItem("Count-");
subcenter.add(list1);
TextArea count = new TextArea(3,5);
count.setBackground(Color.gray);
count.setForeground(Color.black);
count.setEditable(true);
subcenter.add(count);
List list2 = new List(3, true);
list2.addItem("Materials:");
list2.addItem("Materials:");
list2.addItem("Materials:");
subcenter.add(list2);
TextArea materials = new TextArea(3,5);
materials.setBackground(Color.gray);
materials.setForeground(Color.black);
materials.setEditable(true);
subcenter.add(materials);
p2.add(subcenter, BorderLayout.CENTER);
//Build and add south subpanel of Panel 2
Panel subpanel = new Panel();
Label L2 = new Label("Sample Disposition:");
subpanel.add(L2);
TextField T2 = new TextField(10);
T2.setEditable(true);
subpanel.add(T2);
Label l2 = new Label("Date:");
subpanel.add(l2);
TextField t2 = new TextField(10);
t2.setEditable(true);
subpanel.add(t2);
TextArea TF = new TextArea("Feedback:",3,30);
TF.setEditable(true);
subpanel.add(TF);
p2.add(subpanel, BorderLayout.SOUTH);
add(p2, BorderLayout.CENTER);
//Build and add Panel 3.
Panel p3 = new Panel();
Label L3 = new Label("Project Continued on Revision#:");
TextField T3 = new TextField(10);
T3.setEditable(true);
Label l3 = new Label("Order Placed:");
TextField t3 = new TextField(10);
t3.setEditable(true);
p3.add(L3);
p3.add(T3);
p3.add(l3);
p3.add(t3);
add(p3, BorderLayout.SOUTH);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent event){
     System.exit(0);
}//end of Feedback()
public void actionPerformed(ActionEvent AE){
if (AE.getSource() == feedback){
new Feedback();
     setVisible(true);
}//end of feedback if
}//end of actionPerformed
}//end of class Feedback
public static void main (String args[]){
     project1 window = new project1();
     window.setVisible(true);
     //end of main
}//end.

I compiled and did run your code....
it seems you are trying to implement a Frame with two buttons... each time the user click on a button, the main frame displays the equivalent panel with a set of components .. isn�t it ?
well... some tips:
1 - Why don�t you use a JTabbedPane ? a much better container than a simple Frame....
2 - If you really need to use a Frame as a container of multiple forms.. then you should take a look in the java.awt.CardLayout
other tip: don�t use the Frame component as the same class as the ActionListener.. divie these comopnents in two classes...

Satellite A300-1JH PSAGLE: Control buttons don't work with XP

Hello there.
I own a Toshiba Satellite A300 psagle.
It works beautifully, but there is a problem: the tactile music buttons don't work.
I am using Windows XP and I have installed all the drivers available.
Could some one please tell me what I should do.
P.s. how can I activate the "face recognition" option?
Please reply.
Regards.

Hi
Regarding the Toshiba Control Media buttons;
You have to install the Toshiba Controls from the Toshiba European driver page.
Check there the Satellite A300 PSAG8E series and download the Toshiba Controls
Regarding the face reorganization:
Check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127846&#127846
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=131453
Bye

M30 - Front Mode and Audio/Video Control buttons don't work

Hi
The Front Mode and Audio/Video Control Buttons Don't Work
Any ideas?
Thanks

Hi
As far as I know the Toshiba Controls utility is responsible for key usage.
Did you try to install Toshiba Controls?
Check the Toshiba driver page for this driver.
Bye

Minimized & Close buttons don't work !!!

Similar Messages

Maybe you are looking for