Minimum hardware for 'voice' lab ? - Please answer.

Hi,
I've got (3) C2610's running IP Plus IOS 12.3. I also have (2) Cat 2912XL.
If I want to play with VoIP configurations, how much am I going to miss if I don't have a Layer 3 switch ? I mean, the Cat 3550 is kind of a little expensive for me and therefore I would like to play with VoIP without a layer 3 switch for now, if possible.
Please advise.

Thanks. It is a C2610. I put 64D and 16F and I am running in reality the Enterprise Basic image from the XM platform. The problem is that it is 12.3 and I see that XM's 12.4 don't run on C2610's.
How about the switch ?
Can I practice voice labs (at CVOICE level) and dispense the need for layer 3 switches ?

Similar Messages

  • Code to write syntax for JOB submit ( Please answer ASAP)

    Hi,
    I need sytax to submit a job
    Right now I am using this code to send 4 parameters.
    I need to send these 4 in a structure.
    submit Ztestjob USER sy-uname
    via job p_jobnm
    number p_jobcount
    with afko-rsnum eq afko-rsnum
    with aufnr_d eq aufnr_d
    with sernr_d eq sernr_d
    with p_lmnga eq p_lmnga
    AND RETURN.
    So I have to pass a structure of values into the BGprogram through a submit and do a couple of loops in the BGPROGRAM.
    I need the syntax for submit .
    I also need to know how to catch the structure with values in the BGPROGRAM.
    Anyone please answer ASAP
    Message was edited by:
            ramana peddu
    Message was edited by:
            ramana peddu

    Hi,
    <u>SUBMIT</u>
    Calls an executable program of type 1.
    Syntax
    SUBMIT <rep> [AND RETURN] [VIA SELECTION-SCREEN]
                              [USING SELECTION-SET <var>]
                              [WITH <sel> <criterion>]
                              [WITH FREE SELECTIONS <freesel>]
                              [WITH SELECTION-TABLE <rspar>]
                              [LINE-SIZE <width>]
                              [LINE-COUNT <length>].
    Calls the program <rep>. If you omit the AND RETURN addition, the current program is terminated. Otherwise, the data from the current program is retained, and processing returns to the calling program when <rep> has finished running. The other additions control the selection screen and set attributes of the default list in the called program.
    Regards,
    Bhaskar

  • Minimum hardware for video PLAYBACK? Flash 8?

    Does anyone know a resource where I can learn about minimum
    system requirements for Flash8 or later playback?
    I encoded a video using FlashCS3 video encoder - and on most
    computers, it looks just fine/as expected. Just to see what would
    happen, I tried to view it from the web, on a Mac G4/867 that we
    have sitting around because it has PCIx cards for SCSI in it... It
    is running OSX 10.4.11 -- Safari 2.x. It has 1.25 gigs of ram.
    Video simply will not play back on this dinosaur (well, it
    plays, but 1 out of 10 frames, if I'm lucky - and audio is total
    sputter, it is unusable) ... ok, this box is ancient. BUT must I
    assume all current web visitors will have rocket-ship speed
    hardware?
    Is there a guide that's been assembled with guidance? For
    video encoded with VP6, do not exceed Y x Z dimensions at 15 fps in
    Flash player 8, etc... ???? I've searched...
    Thanks in advance for any VP6 encoding guidance.
    Bonus question: since I own CS3 and QTpro (Final Cut Studio),
    is there a true benefit from Flix or Flix Pro (or another stand
    alone encoder)? My primary machine for this is a MacBook Pro C2D
    2.33. Thanks.

    PS -- the internet bandwidth on this machine is superior...
    10megs downstream... on the same network (wired) as a few other
    (faster/newer) machines that have no issue viewing my video. The
    video is ~72mb.

  • Minimum hardware for VPDN scenario (LAC&LNS)

    Hi,
    I've need help with hardware platform selection for vpdn scenario. This deployment will serve up to 20 users max. Can anyone say me which is the minimum router platform and IOS version to use for LAC? And for LNS?
    Thank you.
    Best regards.

    Hi Ciscomax,
    Thaks for your reply.
    Estimated throughput may be up to 100/10Mb. This is the wan access provided by our ISP.
    I think that 28xx/29xx routers are more than I need. These platforms are running as LNS for more than 100 users in another site.
    I want to know if anyone is using any 800/1900 series router for LNS. And what about the IOS version, will sec/k9 needed?
    Best regards.

  • A technical question-not a complaint for Apple? please answer

    I have a technical qeustion which I have now posted 3 times. Why cant I sync my Outlook 2002 calenders & contacts to my ipod using itunes 7. Is this simply because outlook 2002 is no longer supported or is this just a glich? I would really apreciate some kind of response. This is a techical question and not a COMPLAINT.

    Thanks for your help
    Although it dosen't specifically say it is not supported I agree, it would seem that its isn't. I can't understand why. It was supported by itunes 6 and I didn't have to go through all this rigmarole to sync contacts and calenders, why oh why?

  • Tell me as much as you know about iCloud as possible(do you have to pay for it). PLEASE ANSWER.

    Please answer

    Answer what?
    Ask a specific question and you'll get a specific answer.
    Or just read about iCloud yourself here: http://www.apple.com/icloud/

  • Voice lab setup

    Hi,
    I have a router 2811 and wanted to create a voice lab with max 5 ip phones.So i wanted to know what are the minimum devices and modules required for voice lab.I have read in a document stating that for voice requirement are
    two cisco router,two pvdm2-32 and two vic2-2fxs and two vic2-2fxo .
    What else do i need ?Please help
    Regards
    Aateek Singh
    Network Engineer
    Spooster IT Services

    here is my lab equipements and config
    PSTN Router:
    PSTN_Router# sh inv
    NAME: "2811 chassis", DESCR: "2811 chassis"
    PID: CISCO2811         , VID: V02 , SN: FTX0952C2MF
    NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
    PID: VWIC2-2MFT-T1/E1  , VID: V01 , SN: FOC14265LNF
    NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"
    PID: PVDM2-64          , VID: V01 , SN: FOC10252G0F
    Branch1 Router:
    VLAB-R1#sh inventory 
    NAME: "2811 chassis", DESCR: "2811 chassis"
    PID: CISCO2811         , VID: V02 , SN: FTX1011A10J
    NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
    PID: VWIC2-1MFT-T1/E1  , VID: V01 , SN: FOC13285C42
    NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"
    PID: PVDM2-64          , VID: V01 , SN: FOC14022CEA
    and configs: this is only T1 config. you also need to create dial-peerCME phone registrations etc.
    PSTN:
    card type t1 0 0
    network-clock-participate wic 0
    controller T1 0/0/0
     clock source internal
     cablelength short 110
     pri-group timeslots 1-24
    interface Serial0/0/0:23
     no ip address
     encapsulation hdlc
     isdn switch-type primary-ni
     isdn protocol-emulate network
     isdn incoming-voice voice
     isdn negotiate-bchan resend-setup
     no cdp enable
    Branch1:
    card type t1 0 0
    network-clock-participate wic 0 
    controller T1 0/0/0
     cablelength short 110
     pri-group timeslots 1-24
    interface Serial0/0/0:23
     no ip address
     encapsulation hdlc
     isdn switch-type primary-ni
     isdn incoming-voice voice
     no cdp enable
    I think thats enough to built T1 connection between routers. 
    test commands
    PSTN_Router# sh voice port summary 
                                               IN       OUT
    PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
    =============== == ============ ===== ==== ======== ======== ==
    0/0/0:23        01  isdn-voice  up    dorm none     none     y 
    0/0/0:23        02  isdn-voice  up    dorm none     none     y 
    0/0/0:23        03  isdn-voice  up    dorm none     none     y 
    0/0/0:23        04  isdn-voice  up    dorm none     none     y 
    0/0/0:23        05  isdn-voice  up    dorm none     none     y 
    0/0/0:23        06  isdn-voice  up    dorm none     none     y 
    0/0/0:23        07  isdn-voice  up    dorm none     none     y 
    0/0/0:23        08  isdn-voice  up    dorm none     none     y 
    0/0/0:23        09  isdn-voice  up    dorm none     none     y 
    0/0/0:23        10  isdn-voice  up    dorm none     none     y 
    0/0/0:23        11  isdn-voice  up    dorm none     none     y 
    0/0/0:23        12  isdn-voice  up    dorm none     none     y 
    0/0/0:23        13  isdn-voice  up    dorm none     none     y 
    0/0/0:23        14  isdn-voice  up    dorm none     none     y 
    0/0/0:23        15  isdn-voice  up    dorm none     none     y 
    0/0/0:23        16  isdn-voice  up    dorm none     none     y 
    0/0/0:23        17  isdn-voice  up    dorm none     none     y 
    0/0/0:23        18  isdn-voice  up    dorm none     none     y 
    0/0/0:23        19  isdn-voice  up    dorm none     none     y 
    0/0/0:23        20  isdn-voice  up    dorm none     none     y 
    Oper is dorm. it means everithing is good 

  • Please answer my itunes question fast

    hello, my name is joseph wiles, and i have a problem. im trying to get 210 songs off my old android phone to my new iphone, but there is a problem. i already have the songs on my itunes on my computer, but when i plug my iphone to my computer it dosent show up anywhere on itunes. my itunes is 11.1.5.5 for windows 8, please answer my question fast because football season is starting here and i need my music

    Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
    tt2

  • Recommended SCCM 2012 R2 Minimum Hardware Requirements For Small Environment?

    We plan to deploy SCCM 2012 R2  CU1 and SQL 2012 SP2 for the following purposes and want to use the minimum hardware to do the job reliably:
    Keep reports on hardware and software inventory and monitor performance and events on clients and servers. 
    Deploy operating systems with MDT integration.
    Install and uninstall applications on clients on the local LAN (as replacement for GPO software installation during reboots) as well remote laptops on the Internet (we do not have Direct Access do not have Direct Access and do not want to depend on remote
    laptops needing to being logged into VPN to reach them).
    Install Windows Updates and third party patches and updates (Adobe/Java updates etc.) on local LAN as well as to remote laptops on the Internet.
    We only have about 500 clients.  80 percent are on the local LAN all in one building and the rest are laptops for people working on the road and at home who only sporadically connect to VPN.
    Can we do it all on one server or will we need a separate server for LAN clients and a different server in the DMZ to reach remote clients?
    Will we need separate disks for OS, SCCM and SQL with such a small environment or can it be all on a single physical disk or VM VHD?
    Is 8GB RAM, 1 CPU and 500GB disk space enough for this (assuming 50 GB WSUS database and similar amount is OS deployment space for MDT)?

    It will work, no doubt. My point was that if you want fast and responsive system, focus on the disk speed. You're good to go with single server, all in the same box.
    I understand that it will "work" because I just installed SCCM 2012R2 and SQL 2012 CU10 in a lab in a VM using a single VHD and it is working fine with zero clients.
    Should it still work with reasonable performance on a fast hard drive (10-15K drive or SSD) with 500 clients without having to break it out into separate dedicated disks for OS, page file, SCCM, SQL and logs?

  • Minimum hardware requirement for Report server with 4 engines ??

    Hello all ,
    Can someone please tell what is the minimun Hardware requirement to be able to run a Oracle 91 AS with report server having 4 engines ??
    and where I can find this kind of documentation.
    We have a Oracle9iAS Containers for J2EE running on a machine with under 1 ghz power and around 300 mb RAM
    , but the report server seems to keep crashing ..
    Can anyone pls advice
    Thanks

    Hi,
    For calculating the minimum hardware requirements, you may need to look at various factors:
    1. No of reports requests that need to be processed per second
    2. Whether all these requests are synchronous or asynchronous
    3. Response time required
    4. Type of reports - large amounts of data, large no of images, etc
    5. How much caching you are using
    6. No of queries in your report
    7. Simple / complex layout of the report
    and so on.
    So just the information of 4 engines may not be sufficient for trying to calculate the hardware requirements. One useful reference point for you may be the Oracle9i Reports Scalability whitepaper:
    http://otn.oracle.com/products/reports/index.html
    It lists the number of users supported on some pre-defined hardware configurations, and the average response time for the reports server.
    You might also want to take a look at the paper on "Tuning Oracle Reports":
    http://otn.oracle.com/products/reports/htdocs/search.html?cat=SAP&col=ALC&submit=Search
    However, it is also possible that your Reports Server is crashing due to some other problem (not the hardware configuration).
    By the way, your RAM seems to be too low for Oracle9iAS installation. See the installation guide for minimum hardware requirements.
    Navneet.

  • What are the minimum hardware Server requirement for SAP BI BO

    I would be thankful if someone can please tell me  What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
    In the Desktop
    I have 8 GB RAM
    2.60 Ghz Processor ( CPU)
    System type: 64 bit OS
    regards
    ranendra

    Hi,
    Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
    I haven't try with your similar specification but  in the below link some one tried with similiar one.
    What are the minimum system requirements to install SAP BO 4.0/4.1
    Amit

  • Hardware requirement for voice/fax channel from T1?

    Hi all,
    I don't know if this is the right forum, but I am looking for validation on my interpretation of hardware requirements.
    The scenario:
    I currently have a T1 coming in to the facility and terminating into a vendor-supplied Adtran box which splits off one of the channels from the T1 for voice/fax use (the Adtran has a centronics-style connector going to a 66 block)
    I am also in the process of ordering ADSL service to supplement the bandwidth for non-business usage.
    Rather than end up with a solution involving an adtran, ADSL modem, and router or two... I want to combine all services into a 1751 chassis.  My only concern / confusion is how to 'split' off the single voice channel from the T1.  There is a phone # associated with the voice channel.
    I believe that I will need the router, a multiflex T1 WIC (VWIC-1MFT-T1), ADSL wic (WIC-1ADSL-DG), and an FXS card such as the VIC-2FXS
    Am I close here, or completely off base?  Any input or suggestions would be appreciated.
    Thanks!
    -P

    Paolo,
    Thanks for the reply - I guess I'm just trying to figure out if the way I described is the 'concept' and correct WIC/VWIC combination of how to get an analog dialtone from a T1 channel while leaving the rest for data.
    I know there are probably many more benefits to going with a more modern router, but this is for personal use (the T1 is tied to a business account, but hosted in my house and maintained by me) and I can't really get an ISR in my price range - 1751s, on the other hand, are easy to come by and affordable - I just want to ensure I can have a single line available for Fax
    Thanks!
    -P

  • Minimum Hardware Requirement for SAP Business One For HANA

    Hello EveryOne,
        I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
    Is it can install on laptop or I need to buy giant server.
    Thanks in advance

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Minimum Hardware&software system requirements for installing sharepoint?

    Hi,
    I am planing to learn SharePoint,
    That's why,anybody tell me minimum Minimum Hardware&software system requirements for installing sharepoint?
    And also tell me for learning share point for beginners Sites or any materials or PDF's etc......

    Hardware and software requirements (SharePoint Server 2010)
    Plan browser support (SharePoint Server 2010)
    Here's the primary set of
    implementation documentation for SharePoint Server 2010. From there check out Getting Started, Planning and Architecture, Deployment, Operations, and Troubleshooting.
    There are a number of training resources out there (too many to list here) if you are looking for both IT Professional or Developer training. 
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Minimum Hardware Requirement for Siebel CRM 8.0 for Linux Platform?

    Hi,
    What are the minimum hardware requirement for Siebel CRM 8.0 for Linux OS?

    Following are the Linux Platforms supported & officially listed in Siebel 8 Requirement Doc:
    Red Hat Enterprise Linux 4
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Oracle Enterprise Linux 4 Siebel
    Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Novell SUSE Linux Enterprise Server 9
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Regards,
    Shalabhsneha

Maybe you are looking for

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says,

  • Business Rules Not Visible in Planning.............

    Hi All, I have created business rules in Essbase & works well.But Those are not showed in planning App.Here , While i'm creating Business Rules ,able to access for essbase only , when click on planning to shows unable login planning. Plzzzzzzzz help

  • How to get the latest screen value (of input field in VA01)

    Hi Experts, I have a problem that when I am in VA01 (create sales orders) I see the (old) default value of the Req.Deliv.Date (in Item Overview tab). I don't see the latest entered value. This is screen field RV45A-KETDAT. Eg When I enter VA01, I fir

  • BADI ME_GUI_PO_CUST

    Hi, Customer Screens added through the above BADI doesnt appear in ME21n or in create mode/change mode in ME23n.

  • Winhttp 5.1 error on Windows 2008 R2

    Hi,  I have a VB Script that uses WinHttp.WinHttpRequest.5.1, it runs fine on Windows 7x64 and Windows 2003, but dies a horribly on Windows 2008R2.   I tried the STACKOVERFLOW suggestion of re-registering the dll, but that did not work.  After many f