MiniSAP CDs

Hello, I purchased a used ABAP Objects book and unfortunately, it did not have the second CD so I could not complete the installation of miniSAP.  Does any one knows where can I get a copy of the second cd?
Thanks

Hi,
I don't think you can get only the second one separately, but you can order from the installation cds from www.sap.com/shop -> SAP Knowledge Shop -> General -> SAP NetWeaver -> WAS -> WAS 6.20.
BTW If it's a 2 cd version, it means it's MiniWAS 6.10.
I would suggest to order the MiniWAS 6.20 version, it has 3 cd, and costs around 30 Euro.
Regards,
Peter

Similar Messages

  • Minisap installation problem on windows 7

    Hello all... I am new to the software field and I want to learn sap.
    I bought the book ABAP OBJECTS by Horst & Keller, which came with 2 cds.
    I was unable to complete the installation because of the following error..
    info: INSTGUI.EXE
    Protocol version is 10.
    Message checksum is 5737383.
    Info: INSTGUI MessageFile
    Start message loading...
    Info: INSTGUI MessageFile
    Finished message loading.
    Info: InstController Prepare {} {}
    R3SETUP Version: Nov 20 2000
    Info: InstController Prepare {} {}
    Logfile will be set to C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log
        Check C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.log for further messages.
    Info: CommandFileController SyFileVersionSave {} {}
    Saving original content of file C:\Users\PHANID~1\AppData\Local\Temp\mbsinst\mbs.r3s ...
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD KERNEL will not be copied.
    Info: CDSERVER_NT_MSS InternalColdKeyCheck 2 204
    The CD DATA will not be copied.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    checking host name lookup for 'PHANIDHAR-PC'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for 'PHANIDHAR-PC' is 'PHANIDHAR-PC'.
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    host 'PHANIDHAR-PC' has ip address '192.168.1.121'
    Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
    offical host name for '192.168.1.121' is 'PHANIDHAR-PC.gateway.2wire.net'.
    *Error: CALCRAM_NT_MSS ColdKeyCheck 2 178*
    *Phase failed.*
    *Error: Main {} 2 178*
    *Installation aborted.*
    Is it possible for installing it on windows7??? Please help me out here.. thank you in advance...

    Dear satya
    You can install minisap on win 7. Its better to follow this guide.
    use
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25006
    and
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20390
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20467
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/20668
    SIMPLE OVERVIEW
    SAP NetWeaver 7.02 ABAP Developer Edition System Requirements:
    JRE 1.4.2.x or 1.5.0.x for Installation
    Operating System:
    Windows 7 Professional or Windows Server 2008R2 (english)
    Hostname must not exceed 13 characters
    NTFS-File systems
    Internet Explorer 6.0 or higher or Firefox 1.0 or higher (newest recommended)
    At least 2 GB RAM (recommended 4-8 GB)
    Intel Pentium III/1.1 GHz or higher (or compatible)
    50 GB hard disk space temporary during installation - 36 GB permanent
    High-resolution monitor (1024x768 or higher, 256 colors)
    Make sure that no other SAP system is installed on your computer
    The SAP system requires serveral ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600 and 8000. A possible entry can be excluded by using the hash symbol (#).
    If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. The procedure to install a loopback adapter is documented within the download package.
    regars
    priyanshann
    Edited by: priyanshann on Feb 5, 2012 11:06 AM

  • MiniSAP WAS 6.10 and JAVA 1.4.1 (SUSE Linux 9.0)

    Hello all!
    I have some problems with the MiniSAP installation under
    SUSE Linux 9.0.
    I use the MiniSAP WAS 6.10, SAP DB 7.3 and the SAP Gui for the JE 6.10.
    The Problem comes with the Java 1.4.1. In the documentation from the SAP CDs is the version IBMJava2-JRE-1.3-45 required.
    If I try to run the SapGui i get many errors from Java (I think).
    Anybody has a idea ?
    Regards
    René
    e-mail: [email protected]

    Hello René,
    I think you should download the latest SAP GUI for JAVA at: ftp://ftp.sap.com/pub/sapgui/java/630r4/PlatinGUI-Linux-630r4.jar
    Regards
    Gregor

  • Minisap 4.6d installation problem

    Hi experts,
    While iam installing the minisap 4.6d,iam facing the follwoing problem....(i got the CDs from Abap Ojects book)
    "Could not find SQL-Server Instance "MSSQLSERVER" on your DB host "admin". You must install SAP into the default instance or into a named instance that has the same name as your SAP system (SID)."
    Could any one let me know, where i need make the changes...
    Thanks in advance

    Hi Sanjay...
    No way. Still iam facing saaaaaaaame problem....
    Actually i have installed this software 2 times in the earlier.This is 30days trail version.
    Since it was expired, iam trying to load it again.I did not understand what is the problem now.
    just see the errors.....
    "Error: DBCOMMONDBENV_IND_MSS InternalColdKeyCheck 2 416
    Could not find SQL-Server Instance "MSSQLSERVER" on your DB host "admin". You must install SAP into the default instance or into a named instance that has the same name as your SAP system (SID).
    Error: DBCOMMONDBENV_IND_MSS ColdKeyCheck 2 416
    Phase failed.
    Error: Main {} 2 416
    Installation aborted."
    Priya

  • Problem AFTER installation of MiniSAP 4.6D

    Hi SAP Gurus!
    I bought the book "ABAP Objects" by Keller/Krueger and it came with 2 CDs for install MiniSAP 4.6D. I successfully installed it. But when I click "Start SAP MBS" opens a DOS window with the following information:
    C:MBS>runmbs
    C:MBS>set DBMS_TYPE=mss
    C:MBS>set DIR_LIBRARY=.
    C:MBS>set MSSQL_DBNAME=MBS
    C:MBS>rem del pxastat
    C:MBS>start /B msg_server.exe pf=MBS_D00.pfl
    C:MBS>disp+work.exe break pf=MBS_D00.pfl
    dp Ctrl-C enabled
    rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
    MSG_SERVER died => main: MsSInit
    Sat Jan 01 22:38:29 2005
    SemSpinning: 2277 usec for 89793 loops -> 39 loops per usec
    rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
    DISPATCHER died => DpSapEnvInit: DpCommInit
    after that: NOTHING. SAPLogon can´t connect. I checked my hosts file and it's OK, checked my services file and it's OK.
    I am working with Win2K Server Service Pack 3, installed MiniSAP 4.6D and SAPLogon 46D.
    I hope you can help me.
    Thank you in advance.

    I had the same problem but when i looked a the install instructions says it needed service pack 4

  • MINISAP on multiple workstations

    hi,
    we purchased (thru amazon) an SAP book "ABAP Objects" that comes with miniSAP 6.10 CDs.
    1. can we install this miniSAP on multiple workstations?
    2. will there be a problem when we apply for license key extension?
    our IT organization has 3 ABAPers who intend to setup the software.
    regards,
    rico

    You will have 3 different hw keys, you will request 3 different license keys....which is free, so you don't have to worry.
    You order the license key from http://www.sap.com/minisap
    Incho
    Ps: About MiniSAP you can find some info here:
    http://www.geocities.com/incho_master/MiniWAS.htm

  • HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

    i have tried:
    reloading itunes
    unchecking 'write'
    removing lower filters in regedit
    ensuring i had the correct 'gear' info in the upper filters in regedit
    removing 'gear' from regedit, system32
    reloading updated version of 'gear'
    cleaning my registery
    deleting itunes
    cleaning registry again
    reloading itunes
    cleaning registry again
    i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
    i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
    when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
    the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
    and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
    the above is not the case as it also popped up for me to import cd to itunes.
    i tried to copy and past the entire contents here but it would not allow me to paste.
    please help!

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • I've been importing all my old CDs into itunes but one of them which was unknown imported as single tracks. How can I combine these into one album

    I've been importing all my old CDs into itunes but one of them which came up as unknown has imported as single tracks named track 1, track 2 etc. It wasn't an obscure CD (Paul Carrack - the journey so far) but not one that's available in the itunes store. I've manually changed the track names but they all appear as single tracks in the "Albums" section. Is there a way to put them all into an album to show up as an album with the other albums. Other "unknown" CDs I imported have imported with the correct track names but just don't have the album artwork so I don't understand why this one is behaving totally different?

    If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

  • 2 computers, 5 family members with their own iTunes accounts. How do we share purchased iTunes and downloaded CDs with homeshare? (I can't get my old iPod music to all go onto my iPad)

    I have 2 computers - Windows Based
    My husband, myself and the kids all have our own "accounts" on the home computer. This was done to limit certain access when the kids were younger.
    The laptop is pretty much mine. I use both computers for my iTunes music.
    Everyone has their own iTunes account for their music and games. I have been able to get music purchased by my other family members on my iPod in the past if I logged in the home computer under their IDs and attached my iPod. Or, if a family member downloaded a CD, I could get that music thes same way without having to download the CD again under my own login ID. However, I now have an iPad, and I can't transfer music from the iPod to the iPad - specifically that which was downloaded from CDs - not iTunes. And I couldn't get it to go from my iPod to my laptop, although both are authorized computers in the Home Sharing.
    It doesn't seem like the Home Sharing works with the different computer login IDs. The iTunes is universally available regardless of who is logged in, but the libraries vary based on who's user name you are under. I have strugged with importing from one User ID to another, which led me to simply log in under a different family member to get the desired music. There has got to be an easier answer and I'm just not figuring it out.
    I've read the support answers, I've read many of the other responses here as well to those with similiar questions, but I am still struggling.
    Any suggestions?

    If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
    Occam's razor?

  • Archiving cds and why do i need id3 tags

    here comes another one of those questions looking at which codec to use to store music.....i also have tag questions.....
    i'm about to (re-)rip my cd collection and looking at some info re codecs and id3 tags
    now.....i believe i understand the benefits of alac (lower file sizes, keeping id3 tags, lossless compression) v wav(no compression)
    however (and for some out there) if we just entertain the fact that wav may have some minute benefit for me depending on my questions and answers given.....and yes i know wav and alac will sound the same to the human ear - i accept that as a given of lossless compression ......
    points i'd like to outline:
    i am looking to rip my cds, firstly and mostly, for an archiving purpose!! purpose numero uno!!
    i could well want to re-create cds with these archived records in the future
    size of files is of no concern to me at all
    i'm using a mac nowadays
    i will convert most of these files, where needed, to use with a portable music player (i'm not bothered with having, say a wav file and then also converting and having an alac file, as crazy as that sounds)
    this is where i ask for info re the benefits of embedded tags that are found in alac:
    are these tags that important?
    where do they come into play in ripping and later converting music?
    are these uses just bells and whistles that have no benefit to my needs?
    if i rip cds to wav (or aiff), say, using itunes, will cd info and track listings be available on the downloading database (eg itunes) to name these wav files?
    if i then ensure these song files are kept under the album's folder, have i just done what tags do? surely not. that is all i have needed in the past.
    this is where i feel i may be really missing what id tags (can) do
    are tags more than just managing song files and where they belong and where they have come from?
    is it just a convenience of not personally managing your song files (as per previous paragraph)?
    (in the past i had ripped cds to mp3 codec. i think i used "cd rip" or something like that on my pc.
    my mp3 files were individually named and sorted and kept under album folders under artist name folders.
    apart form the very odd occasion all track and album info i needed was found on a database that was attached to the ripping software.
    i never had a problem managing/maintaining these files and folders.)
    i welcome some enlightenment on some of my questions above and other info that may be relevant
    and yes, i understand that music will sound the same as a wav file or alac file - but humour me re using wav and tell me why i need id3 tags
    i guess the crux of it is:
    why do i need id3 tags?
    does my managing of my song file in the album folder do what tags do?
    what problems/shortcomings/headaches may i encounter by not having those tags if i use wav as opposed to alac?
    what do i not know about these little buggers?
    what codec is best for my purpose of archiving and re creating of cds (for playing in cd players)
    thanks in advance for your input and any clarity that i may experience through this
    peter t
    excuse my long windedness (i have spent some time editing this entry)

    Crows2012 wrote:
    as mentioned earlier if i just have songs (wav) in album folders, when i import these albums into itunes, do you know if these will come up under AN album with their file names purely using my filename setup (but with no artwork)?
    Yes, iTunes will read the filename, such as "Track 1" or something else and display it. But nothing else. No Album or Artist.
    so the tracks will remain grouped as an album based on their initial folder and the albums and tracks as per file name?
    Crows2012 wrote:
    also, does aiff have limitations (apart from the full size of the file)?
    I'm not sure I understand what you mean. For all practical purposes AIFF and WAV are exactly the same thing. They're just file containers.
    i thought that i had read somewhere that aiff tags could run into some issues with its tags - ie may not always be transferred 100% accurately with certain players (or hardware maybe)
    Crows2012 wrote:
    and how do these codecs work re-creating an album for the purposes of playing in a cd player? - this is a crucial question for the purpose of my archiving/backup of CDs THEMSELVES
    That's actually going to depend on what burning software you use. Once you rip the tracks to whatever file container you choose (WAV/AIFF/ALAC) you'll never really exactly re-create the album. But for archiving purposes all three file containers will do what you want, which is to create a lossless archive. AIFF has the advantage of supporting embedded ID3, which ALAC has the additional advantage of the files also being about half the size of AIFF/WAV files.
    i was thinking that maybe wav was able to recreate an album (in effect duplicate one) if my cd was lost or damaged in the future. i was thinking this IF when ripping to wav everything is unchanged (unless there is other data on the original cd). and maybe only possible with wav. the purpose for this would be to play recreated cds on my cd player
    any idea on this one?
    (i havent looked too thoroughly on this angle but i'll keep googling on this one)
    much appreciate all info thus far
    peter t

  • ITunes 10.6.3.25 doesn't recognise CDs

    Hi,
    My iTunes always worked perfectly fine until the other day when it stopped recognising my music CDs. When running Diagnostics it says there are no issues and recognises the CD drive but it won't show the CD on the left hand side, under Devices. This means that I cannot import my music normally.
    I have not installed any new programs but I noticed that Roxio had started popping up (I didn't even know I had it installed on my machine and had never used it before) so I uninstalled it. The problem still persists.
    The odd thing is, if I reboot my PC, iTunes will recognise the first CD I put in but will not show any subsequent CD I insert in the drive.
    Any idea of what could be causing the problem and how to fix it? I am running Windows 7, btw. Many thanks!

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • ITunes can no longer play CDs, not sure why

    Something very strange. For some reason iTunes no longer will play or import audio CDs. I have never had a problem before this playing or importing CDs - I just imported 3 CDs last weekend.
    If I insert a CD, iTunes never even mounts it. If I open the CD by double clicking on the drive, and double click the tracks, iTunes opens but doesn't play the songs: it just doesn't do anything.
    The CD drive is working fine. I changed the the default progams for .cda files first to real player then to windows media, and both played the songs on the CD without any problems at all. I then reassigned .cda files to iTunes, but it just won't play.
    I have tried repairing both iTunes and Quicktime via add/remove programs, and rebooted many times, but still iTunes will not play the songs from the cd or even show it in the sidebar.
    What is also strange is that even though iTunes doesn't show the CD as mounted in the side bar, I can still choose "Eject Disk" from the "Controls" menu and it ejects the CD, so it does appear that iTunes can interact with the CD drive, it just does not seem to read the audio files.
    It does not matter what CD I try - even older CDs without copy protection. When I run iTunes diagnostics CD/DVD Drive Tests, I get Green lights for "Audio CD found", "Driver correctly installed", and "Audio CD read successfully", but I get a Red light next to "Unable to access audio CD".
    I get the same result with the interal CD drive and my external usb2 CD/DVD burner.
    I'm out of ideas and would appreciate any advice or help.
    Thanks.

    Nevermind, I just did some more searching on the boards and found this topic from someone who had the exact same problem.
    http://discussions.apple.com/thread.jspa?threadID=1517728
    I stopped TruDirect and everything started working again.
    Sorry for the unnecessary post.

  • Can no longer read DVDs or CDs--DESPERATE

    I am running OSX 10.7.3. Yesterday all my thousands of fonts completely disappeared from Suitcase Fusion 2. I was told by Extensis that I could not get them back, but that I needed to upgrade to Fusion 3 which would be compatible with Lion. I did that. When I tried to get my stored fonts off the CDs and DVDs I'd stored them on all the CDs appeared to be blank and I got a message on the DVD that it cannot be read on my computer. (I have used all these CDs and DVDs before.)
    I am in desperate trouble. I need these fonts for my design work and I can not possibly afford to replace them.
    In looking at some posts from others, I see that this has happened to many people once they upgraded to Lion.
    Can someone please help me?
    Thank you so, so much in advance!

    Try a slot drive cleaner and all the other suggestions mentioned in the Apple article - Apple Portables: Troubleshooting the slot load optical disc drive
    I am running OSX 10.7.3.
    Yet your system profile confirms you are actually using "Mac OS X (10.4.8)."  Please correct.

  • After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded  to SSD). How do I get a n iphoto back to read by old CDs?

    After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups.   HELP

    Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
    To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
    To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

  • When I attempt to log on to I tunes I get the following message  "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing  This can happen as a result of installing other CD burning software  Please reinstall

    When I attempt to log on to I tunes I get the following message:
    "The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
      This can happen as a result of installing other CD burning software. Please re-install I Tunes."
    To my knowledge no new software has been installed.  I have tried un-installing and re-installing I Tunes but I still
    get the same message.
    Can anyone offer any suggestions?  Do I need to download a new driver?
    Bill Martin

    I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
    Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
    If so, here's the relevant instructions for that step:
    On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
    Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
    Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

Maybe you are looking for